- 25 Jun, 2015 40 commits
-
-
Naoya Horiguchi authored
memory_failure() can run in 2 different mode (specified by MF_COUNT_INCREASED) in page refcount perspective. When MF_COUNT_INCREASED is set, memory_failure() assumes that the caller takes a refcount of the target page. And if cleared, memory_failure() takes it in it's own. In current code, however, refcounting is done differently in each caller. For example, madvise_hwpoison() uses get_user_pages_fast() and hwpoison_inject() uses get_page_unless_zero(). So this inconsistent refcounting causes refcount failure especially for thp tail pages. Typical user visible effects are like memory leak or VM_BUG_ON_PAGE(!page_count(page)) in isolate_lru_page(). To fix this refcounting issue, this patch introduces get_hwpoison_page() to handle thp tail pages in the same manner for each caller of hwpoison code. memory_failure() might fail to split thp and in such case it returns without completing page isolation. This is not good because PageHWPoison on the thp is still set and there's no easy way to unpoison such thps. So this patch try to roll back any action to the thp in "non anonymous thp" case and "thp split failed" case, expecting an MCE(SRAR) generated by later access afterward will properly free such thps. [akpm@linux-foundation.org: fix CONFIG_HWPOISON_INJECT=m] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
memory_failure() doesn't handle thp itself at this time and need to split it before doing isolation. Currently thp is split in the middle of hwpoison_user_mappings(), but there're corner cases where memory_failure() wrongly tries to handle thp without splitting. 1) "non anonymous" thp, which is not a normal operating mode of thp, but a memory error could hit a thp before anon_vma is initialized. In such case, split_huge_page() fails and me_huge_page() (intended for hugetlb) is called for thp, which triggers BUG_ON in page_hstate(). 2) !PageLRU case, where hwpoison_user_mappings() returns with SWAP_SUCCESS and the result is the same as case 1. memory_failure() can't avoid splitting, so let's split it more earlier, which also reduces code which are prepared for both of normal page and thp. Signed-off-by:
-
Zhihui Zhang authored
The name SWAP implies that we are dealing with anonymous pages only. In fact, the original patch that introduced the min_unmapped_ratio logic was to fix an issue related to file pages. Rename it to RECLAIM_UNMAP to match what does. Historically, commit a6dc60f8 ("vmscan: rename sc.may_swap to may_unmap") renamed .may_swap to .may_unmap, leaving RECLAIM_SWAP behind. commit 2e2e4259 ("vmscan,memcg: reintroduce sc->may_swap") reintroduced .may_swap for memory controller. Signed-off-by:
Zhihui Zhang <zzhsuny@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Nishanth Aravamudan authored
Based upon 675becce ("mm: vmscan: do not throttle based on pfmemalloc reserves if node has no ZONE_NORMAL") from Mel. We have a system with the following topology: # numactl -H available: 3 nodes (0,2-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 0 size: 28273 MB node 0 free: 27323 MB node 2 cpus: node 2 size: 16384 MB node 2 free: 0 MB node 3 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 node 3 size: 30533 MB node 3 free: 13273 MB node distances: node 0 2 3 0: 10 20 20 2: 20 10 20 3: 20 20 10 Node 2 has no free memory, because: # cat /sys/devices/system/node/node2/hugepages/hugepages-16777216kB/nr_hugepages 1 This leads to the following zoneinfo: Node 2, zone DMA pages free 0 min 1840 low 2300 high 2760 scanned 0 spanned 262144 present 262144 managed 262144 ... all_unreclaimable: 1 If one then attempts to allocate some normal 16M hugepages via echo 37 > /proc/sys/vm/nr_hugepages The echo never returns and kswapd2 consumes CPU cycles. This is because throttle_direct_reclaim ends up calling wait_event(pfmemalloc_wait, pfmemalloc_watermark_ok...). pfmemalloc_watermark_ok() in turn checks all zones on the node if there are any reserves, and if so, then indicates the watermarks are ok, by seeing if there are sufficient free pages. 675becce added a condition already for memoryless nodes. In this case, though, the node has memory, it is just all consumed (and not reclaimable). Effectively, though, the result is the same on this call to pfmemalloc_watermark_ok() and thus seems like a reasonable additional condition. With this change, the afore-mentioned 16M hugepage allocation attempt succeeds and correctly round-robins between Nodes 1 and 3. Signed-off-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anton Blanchard <anton@samba.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by:
-
Anisse Astier authored
It's been five years now that KM_* kmap flags have been removed and that we can call clear_highpage from any context. So we remove prep_zero_pages accordingly. Signed-off-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
-
Kirill A. Shutemov authored
Reintroduce 8d63d99a ("mm: avoid tail page refcounting on non-THP compound pages") after removing bogus VM_BUG_ON_PAGE() in put_unrefcounted_compound_page(). THP uses tail page refcounting to be able to split huge pages at any time. Tail page refcounting is not needed for other users of compound pages and it's harmful because of overhead. We try to exclude non-THP pages from tail page refcounting using __compound_tail_refcounted() check. It excludes most common non-THP compound pages: SL*B and hugetlb, but it doesn't catch rest of __GFP_COMP users -- drivers. And it's not only about overhead. Drivers might want to use compound pages to get refcounting semantics suitable for mapping high-order pages to userspace. But tail page refcounting breaks it. Tail page refcounting uses ->_mapcount in tail pages to store GUP pins on them. It means GUP pins would affect page_mapcount() for tail pages. It's not a problem for THP, because it never maps tail pages. But unlike THP, drivers map parts of compound pages with PTEs and it makes page_mapcount() be called for tail pages. In particular, GUP pins would shift PSS up and affect /proc/kpagecount for such pages. But, I'm not aware about anything which can lead to crash or other serious misbehaviour. Since currently all THP pages are anonymous and all drivers pages are not, we can fix the __compound_tail_refcounted() check by requiring PageAnon() to enable tail page refcounting. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Kirill A. Shutemov authored
My commit 8d63d99a ("mm: avoid tail page refcounting on non-THP compound pages") which was merged during 4.1 merge window caused regression: page:ffffea0010a15040 count:0 mapcount:1 mapping: (null) index:0x0 flags: 0x8000000000008014(referenced|dirty|tail) page dumped because: VM_BUG_ON_PAGE(page_mapcount(page) != 0) ------------[ cut here ]------------ kernel BUG at mm/swap.c:134! The problem can be reproduced by playing *two* audio files at the same time and then stopping one of players. I used two mplayers to trigger this. The VM_BUG_ON_PAGE() which triggers the bug is bogus: Sound subsystem uses compound pages for its buffers, but unlike most __GFP_COMP sound maps compound pages to userspace with PTEs. In our case with two players map the buffer twice and therefore elevates page_mapcount() on tail pages by two. When one of players exits it unmaps the VMA and drops page_mapcount() to one and try to release reference on the page with put_page(). My commit changes which path it takes under put_compound_page(). It hits put_unrefcounted_compound_page() where VM_BUG_ON_PAGE() is. It sees page_mapcount() == 1. The function wrongly assumes that subpages of compound page cannot be be mapped by itself with PTEs.. The solution is simply drop the VM_BUG_ON_PAGE(). Note: there's no need to move the check under put_page_testzero(). Allocator will check the mapcount by itself before putting on free list. Signed-off-by:
-
Rasmus Villemoes authored
For !CONFIG_NUMA, hashdist will always be 0, since it's setter is otherwise compiled out. So we can save 4 bytes of data and some .text (although mostly in __init functions) by only defining it for CONFIG_NUMA. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
-
Zhang Zhen authored
Currently we have many duplicates in definitions of hugetlb_prefault_arch_hook. In all architectures this function is empty. Signed-off-by:
Zhang Zhen <zhenzhang.zhang@huawei.com> Acked-by:
-
Laurent Dufour authored
Some processes (CRIU) are moving the vDSO area using the mremap system call. As a consequence the kernel reference to the vDSO base address is no more valid and the signal return frame built once the vDSO has been moved is not pointing to the new sigreturn address. This patch handles vDSO remapping and unmapping. Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Laurent Dufour authored
Some architectures would like to be triggered when a memory area is moved through the mremap system call. This patch introduces a new arch_remap() mm hook which is placed in the path of mremap, and is called before the old area is unmapped (and the arch_unmap() hook is called). Signed-off-by:
-
Laurent Dufour authored
CRIU is recreating the process memory layout by remapping the checkpointee memory area on top of the current process (criu). This includes remapping the vDSO to the place it has at checkpoint time. However some architectures like powerpc are keeping a reference to the vDSO base address to build the signal return stack frame by calling the vDSO sigreturn service. So once the vDSO has been moved, this reference is no more valid and the signal frame built later are not usable. This patch serie is introducing a new mm hook framework, and a new arch_remap hook which is called when mremap is done and the mm lock still hold. The next patch is adding the vDSO remap and unmap tracking to the powerpc architecture. This patch (of 3): This patch introduces a new set of header file to manage mm hooks: - per architecture empty header file (arch/x/include/asm/mm-arch-hooks.h) - a generic header (include/linux/mm-arch-hooks.h) The architecture which need to overwrite a hook as to redefine it in its header file, while architecture which doesn't need have nothing to do. The default hooks are defined in the generic header and are used in the case the architecture is not defining it. In a next step, mm hooks defined in include/asm-generic/mm_hooks.h should be moved here. Signed-off-by:
-
Zhang Zhen authored
Currently we have many duplicates in definitions of huge_pmd_unshare. In all architectures this function just returns 0 when CONFIG_ARCH_WANT_HUGE_PMD_SHARE is N. This patch puts the default implementation in mm/hugetlb.c and lets these architectures use the common code. Signed-off-by:
-
Kirill A. Shutemov authored
On mlock(2) we trigger COW on private writable VMA to avoid faults in future. mm/gup.c: 840 long populate_vma_page_range(struct vm_area_struct *vma, 841 unsigned long start, unsigned long end, int *nonblocking) 842 { ... 855 * We want to touch writable mappings with a write fault in order 856 * to break COW, except for shared mappings because these don't COW 857 * and we would not want to dirty them for nothing. 858 */ 859 if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE) 860 gup_flags |= FOLL_WRITE; But we miss this case when we make VM_LOCKED VMA writeable via mprotect(2). The test case: #define _GNU_SOURCE #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/resource.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #define PAGE_SIZE 4096 int main(int argc, char **argv) { struct rusage usage; long before; char *p; int fd; /* Create a file and populate first page of page cache */ fd = open("/tmp", O_TMPFILE | O_RDWR, S_IRUSR | S_IWUSR); write(fd, "1", 1); /* Create a *read-only* *private* mapping of the file */ p = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0); /* * Since the mapping is read-only, mlock() will populate the mapping * with PTEs pointing to page cache without triggering COW. */ mlock(p, PAGE_SIZE); /* * Mapping became read-write, but it's still populated with PTEs * pointing to page cache. */ mprotect(p, PAGE_SIZE, PROT_READ | PROT_WRITE); getrusage(RUSAGE_SELF, &usage); before = usage.ru_minflt; /* Trigger COW: fault in mlock()ed VMA. */ *p = 1; getrusage(RUSAGE_SELF, &usage); printf("faults: %ld\n", usage.ru_minflt - before); return 0; } $ ./test faults: 1 Let's fix it by triggering populating of VMA in mprotect_fixup() on this condition. We don't care about population error as we don't in other similar cases i.e. mremap. [akpm@linux-foundation.org: tweak comment text] Signed-off-by: -
Jiri Kosina authored
khugepaged_do_scan() checks in every iteration whether freezing(current) is true, and in such case breaks out of the loop, which causes try_to_freeze() to be called immediately afterwards in khugepaged_wait_work(). If nothing else, this causes unnecessary freezing(current) test, and also makes the way khugepaged enters freezer a bit less obvious than necessary. Let's just try to freeze directly, instead of splitting it into two (directly adjacent) phases. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Andi Kleen authored
All the items mentioned here have been either addressed, or were not really needed. So just remove the comment. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Andi Kleen authored
Here's another comment fix for hwpoison. It describes the "guiding principle" on when to add new memory error recovery code. Signed-off-by:
-
Rasmus Villemoes authored
The first is a keyboard-off-by-one, the other two the ordinary mathy kind. Signed-off-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
Daniel Sanders authored
This patch moves the initialization of the size_index table slightly earlier so that the first few kmem_cache_node's can be safely allocated when KMALLOC_MIN_SIZE is large. There are currently two ways to generate indices into kmalloc_caches (via kmalloc_index() and via the size_index table in slab_common.c) and on some arches (possibly only MIPS) they potentially disagree with each other until create_kmalloc_caches() has been called. It seems that the intention is that the size_index table is a fast equivalent to kmalloc_index() and that create_kmalloc_caches() patches the table to return the correct value for the cases where kmalloc_index()'s if-statements apply. The failing sequence was: * kmalloc_caches contains NULL elements * kmem_cache_init initialises the element that 'struct kmem_cache_node' will be allocated to. For 32-bit Mips, this is a 56-byte struct and kmalloc_index returns KMALLOC_SHIFT_LOW (7). * init_list is called which calls kmalloc_node to allocate a 'struct kmem_cache_node'. * kmalloc_slab selects the kmem_caches element using size_index[size_index_elem(size)]. For MIPS, size is 56, and the expression returns 6. * This element of kmalloc_caches is NULL and allocation fails. * If it had not already failed, it would have called create_kmalloc_caches() at this point which would have changed size_index[size_index_elem(size)] to 7. I don't believe the bug to be LLVM specific but GCC doesn't normally encounter the problem. I haven't been able to identify exactly what GCC is doing better (probably inlining) but it seems that GCC is managing to optimize to the point that it eliminates the problematic allocations. This theory is supported by the fact that GCC can be made to fail in the same way by changing inline, __inline, __inline__, and __always_inline in include/linux/compiler-gcc.h such that they don't actually inline things. Signed-off-by:
Daniel Sanders <daniel.sanders@imgtec.com> Acked-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
-
Gavin Guo authored
The slub_debug=PU,kmalloc-xx cannot work because in the create_kmalloc_caches() the s->name is created after the create_kmalloc_cache() is called. The name is NULL in the create_kmalloc_cache() so the kmem_cache_flags() would not set the slub_debug flags to the s->flags. The fix here set up a kmalloc_names string array for the initialization purpose and delete the dynamic name creation of kmalloc_caches. [akpm@linux-foundation.org: s/kmalloc_names/kmalloc_info/, tweak comment text] Signed-off-by:
Gavin Guo <gavin.guo@canonical.com> Acked-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since xtensa doesn't select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in order to loop over each sg element. But this can help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Chris Metcalf authored
Allowing watchdog threads to be parked means that we now have the opportunity of actually seeing persistent parked threads in the output of /proc/<pid>/stat and /proc/<pid>/status. The existing code reported such threads as "Running", which is kind-of true if you think of the case where we park them as part of taking cpus offline. But if we allow parking them indefinitely, "Running" is pretty misleading, so we report them as "Sleeping" instead. We could simply report them with a new string, "Parked", but it feels like it's a bit risky for userspace to see unexpected new values; the output is already documented in Documentation/filesystems/proc.txt, and it seems like a mistake to change that lightly. The scheduler does report parked tasks with a "P" in debugging output from sched_show_task() or dump_cpu_task(), but that's a different API. Similarly, the trace_ctxwake_* routines report a "P" for parked tasks, but again, different API. This change seemed slightly cleaner than updating the task_state_array to have additional rows. TASK_DEAD should be subsumed by the exit_state bits; TASK_WAKEKILL is just a modifier; and TASK_WAKING can very reasonably be reported as "Running" (as it is now). Only TASK_PARKED shows up with unreasonable output here. Signed-off-by:
Chris Metcalf <cmetcalf@ezchip.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Chris Metcalf authored
Change the default behavior of watchdog so it only runs on the housekeeping cores when nohz_full is enabled at build and boot time. Allow modifying the set of cores the watchdog is currently running on with a new kernel.watchdog_cpumask sysctl. In the current system, the watchdog subsystem runs a periodic timer that schedules the watchdog kthread to run. However, nohz_full cores are designed to allow userspace application code running on those cores to have 100% access to the CPU. So the watchdog system prevents the nohz_full application code from being able to run the way it wants to, thus the motivation to suppress the watchdog on nohz_full cores, which this patchset provides by default. However, if we disable the watchdog globally, then the housekeeping cores can't benefit from the watchdog functionality. So we allow disabling it only on some cores. See Documentation/lockup-watchdogs.txt for more information. [jhubbard@nvidia.com: fix a watchdog crash in some configurations] Signed-off-by:
Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Chris Metcalf authored
This patch series allows the watchdog to run by default only on the housekeeping cores when nohz_full is in effect; this seems to be a good compromise short of turning it off completely (since the nohz_full cores can't tolerate a watchdog). To provide customizability, we add /proc/sys/kernel/watchdog_cpumask so that the set of cores running the watchdog can be tuned to different values after bootup. To implement this customizability, we add a new smpboot_update_cpumask_percpu_thread() API to the smpboot_thread subsystem that lets us park or unpark "unwanted" threads. And now that threads can be parked for long periods of time, we tweak the /proc/<pid>/stat and /proc/<pid>/status code so parked threads aren't reported as running, which is otherwise confusing. This patch (of 3): This change allows some cores to be excluded from running the smp_hotplug_thread tasks. The following commit to update kernel/watchdog.c to use this functionality is the motivating example, and more information on the motivation is provided there. A new smp_hotplug_thread field is introduced, "cpumask", which is cpumask field managed by the smpboot subsystem that indicates whether or not the given smp_hotplug_thread should run on that core; the cpumask is checked when deciding whether to unpark the thread. To limit the cpumask to less than cpu_possible, you must call smpboot_update_cpumask_percpu_thread() after registering. Signed-off-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since sparc does select ARCH_HAS_SG_CHAIN, it is necessary to use for_each_sg() in order to loop over each sg element. This also help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since parisc doesn't select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in order to loop over each sg element. But this can help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
-
Joseph Qi authored
Some functions are only used locally, so mark them as static. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by:
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by:
-
Joseph Qi authored
contig_blocks gotten from ocfs2_extent_map_get_blocks cannot be compared with clusters_to_alloc. So convert it to clusters first. Signed-off-by:
Weiwei Wang <wangww631@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Xue jiufei authored
ocfs2_abort_trigger() use bh->b_assoc_map to get sb. But there's no function to set bh->b_assoc_map in ocfs2, it will trigger NULL pointer dereference while calling this function. We can get sb from bh->b_bdev->bd_super instead of b_assoc_map. [akpm@linux-foundation.org: update comment, per Joseph] Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
alex chen authored
Signed-off-by:
Alex Chen <alex.chen@huawei.com> Reviewed-by:
-
WeiWei Wang authored
In ocfs2 direct read/write, OCFS2_IOCB_SEM lock type is used to protect inode->i_alloc_sem rw semaphore lock in the earlier kernel version. However, in the latest kernel, inode->i_alloc_sem rw semaphore lock is not used at all, so OCFS2_IOCB_SEM lock type needs to be removed. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Joseph Qi authored
jbd2_journal_dirty_metadata may fail. Currently it cannot take care of non zero return value and just BUG in ocfs2_journal_dirty. This patch is aborting the handle and journal instead of BUG. Signed-off-by:
-
Xue jiufei authored
ocfs2_rotate_tree_left() calls __ocfs2_rotate_tree_left() for left rotation while non-rightmost path containing an empty extent in the leaf block. __ocfs2_rotate_tree_left() returns -EAGAIN if right subtree having an empty extent and pass the empty_extent_path to caller. The caller ocfs2_rotate_tree_left() will restart rotation from the returned path. It will trigger the BUG_ON(!ocfs2_is_empty_extent) when the et on disk is as follows: eb0 is the leaf block of path(say path_a) passed to ocfs2_rotate_tree_left, which has an empty rec[0]. eb1 is the leaf block of path(say path_b) that just right to path_a, which has no empty record. eb2 is the leaf block of path(say path_c) that just right to path_b, which has an empty rec[0]. And path_c is also the rightmost path. Now we want to remove the empty rec[0] in eb0: ocfs2_rotate_tree_left: -> call __ocfs2_rotate_tree_left with path_a as its input *path* -> call ocfs2_rotate_subtree_left with path_a as its input *left_path* and path_b as its input *right_path*. it will move rec[0] in eb1 to eb0, and rec[0] in eb0 is not empty now. -> continue to call ocfs2_rotate_subtree_left with path_b as its input *left_path* and path_c as its input *right_path*, and return -EAGAIN because eb2 has an empty rec[0] -> call __ocfs2_rotate_tree_left with path_c as it input, rotate all records in eb2 to left and return 0. -> call __ocfs2_rotate_tree_left with path_a as its input, and triggers the BUG_ON(!ocfs2_is_empty_extent) as the rec[0] in eb0 is not empty. So the BUG_ON() should be removed and return 0 if rec[0] is no longer an empty extent. Signed-off-by: -
Xue jiufei authored
ocfs2_figure_merge_contig_type() still returns CONTIG_NONE when some error occurs which will cause an unpredictable error. So return a proper errno when ocfs2_figure_merge_contig_type() fails. Signed-off-by:
-
Joseph Qi authored
__dlm_wait_on_lockres_flags_set() is declared but not implemented and used. So remove it. Signed-off-by:
-
Daeseok Youn authored
The use of 'status' in __ocfs2_add_entry() can return wrong value. Some functions' return value in __ocfs2_add_entry(), i.e ocfs2_journal_access_di() is saved to 'status'. But 'status' is not used in 'bail' label for returning result of __ocfs2_add_entry(). So use retval instead of status. Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Reviewed-by:
-
Joseph Qi authored
Once dio crashed it will leave an entry in orphan dir. And orphan scan will take care of the clean up. There is a tiny race case that the same entry will be truncated twice and then trigger the BUG in ocfs2_del_inode_from_orphan. Signed-off-by:
-
