KMSAN reports uses of uninitialized memory in zlib's longest_match()
called on memory originating from zlib_alloc_workspace().
This issue is known by zlib maintainers and is claimed to be harmless,
but to be on the safe side we'd better initialize the memory.

Link: https://zlib.net/zlib_faq.html#faq36
Reported-by: syzbot+14d9e7602ebdf7ec0a60@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There was a recent regression in btrfs/177 that started happening with
the size class patches ("btrfs: introduce size class to block group
allocator").  This however isn't a regression introduced by those
patches, but rather the bug was uncovered by a change in behavior in
these patches.  The patches triggered more chunk allocations in the
^free-space-tree case, which uncovered a race with device shrink.

The problem is we will set the device total size to the new size, and
use this to find a hole for a device extent.  However during shrink we
may have device extents allocated past this range, so we could
potentially find a hole in a range past our new shrink size.  We don't
actually limit our found extent to the device size anywhere, we assume
that we will not find a hole past our device size.  This isn't true with
shrink as we're relocating block groups and thus creating holes past the
device size.

Fix this by making sure we do not search past the new device size, and
if we wander into any device extents that start after our device size
simply break from the loop and use whatever hole we've already found.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We take two stripe numbers if vertical errors are found.  In case it is
just a pstripe it does not matter but in case of raid 6 it matters as
both stripes need to be fixed.

Fixes: 7a315072 ("btrfs: raid56: do data csum verification during RMW cycle")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If we have one task trying to start the quota rescan worker while another
one is trying to disable quotas, we can end up hitting a race that results
in the quota rescan worker doing a NULL pointer dereference. The steps for
this are the following:

1) Quotas are enabled;

2) Task A calls the quota rescan ioctl and enters btrfs_qgroup_rescan().
   It calls qgroup_rescan_init() which returns 0 (success) and then joins a
   transaction and commits it;

3) Task B calls the quota disable ioctl and enters btrfs_quota_disable().
   It clears the bit BTRFS_FS_QUOTA_ENABLED from fs_info->flags and calls
   btrfs_qgroup_wait_for_completion(), which returns immediately since the
   rescan worker is not yet running.
   Then it starts a transaction and locks fs_info->qgroup_ioctl_lock;

4) Task A queues the rescan worker, by calling btrfs_queue_work();

5) The rescan worker starts, and calls rescan_should_stop() at the start
   of its while loop, which results in 0 iterations of the loop, since
   the flag BTRFS_FS_QUOTA_ENABLED was cleared from fs_info->flags by
   task B at step 3);

6) Task B sets fs_info->quota_root to NULL;

7) The rescan worker tries to start a transaction and uses
   fs_info->quota_root as the root argument for btrfs_start_transaction().
   This results in a NULL pointer dereference down the call chain of
   btrfs_start_transaction(). The stack trace is something like the one
   reported in Link tag below:

   general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] PREEMPT SMP KASAN
   KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
   CPU: 1 PID: 34 Comm: kworker/u4:2 Not tainted 6.1.0-syzkaller-13872-gb6bb9676 #0
   Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
   Workqueue: btrfs-qgroup-rescan btrfs_work_helper
   RIP: 0010:start_transaction+0x48/0x10f0 fs/btrfs/transaction.c:564
   Code: 48 89 fb 48 (...)
   RSP: 0018:ffffc90000ab7ab0 EFLAGS: 00010206
   RAX: 0000000000000041 RBX: 0000000000000208 RCX: ffff88801779ba80
   RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
   RBP: dffffc0000000000 R08: 0000000000000001 R09: fffff52000156f5d
   R10: fffff52000156f5d R11: 1ffff92000156f5c R12: 0000000000000000
   R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000003
   FS:  0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: 00007f2bea75b718 CR3: 000000001d0cc000 CR4: 00000000003506e0
   DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
   Call Trace:
    <TASK>
    btrfs_qgroup_rescan_worker+0x3bb/0x6a0 fs/btrfs/qgroup.c:3402
    btrfs_work_helper+0x312/0x850 fs/btrfs/async-thread.c:280
    process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
    worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
    kthread+0x266/0x300 kernel/kthread.c:376
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
    </TASK>
   Modules linked in:

So fix this by having the rescan worker function not attempt to start a
transaction if it didn't do any rescan work.

Reported-by: syzbot+96977faa68092ad382c4@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000e5454b05f065a803@google.com/
Fixes: e804861b ("btrfs: fix deadlock between quota disable and qgroup rescan worker")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

During lseek, for SEEK_DATA and SEEK_HOLE modes, we access the disk_bytenr
of an extent without checking its type. However inline extents have their
data starting the offset of the disk_bytenr field, so accessing that field
when we have an inline extent can result in either of the following:

1) Interpret the inline extent's data as a disk_bytenr value;

2) In case the inline data is less than 8 bytes, we access part of some
   other item in the leaf, or unused space in the leaf;

3) In case the inline data is less than 8 bytes and the extent item is
   the first item in the leaf, we can access beyond the leaf's limit.

So fix this by not accessing the disk_bytenr field if we have an inline
extent.

Fixes: b6e83356 ("btrfs: make hole and data seeking a lot more efficient")
Reported-by: Matthias Schoepfer <matthias.schoepfer@googlemail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216908
Link: https://lore.kernel.org/linux-btrfs/7f25442f-b121-2a3a-5a3d-22bcaae83cd4@leemhuis.info/
CC: stable@vger.kernel.org # 6.1
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

write_one_page is an awkward interface that expects the page locked and
->writepage to be implemented.  Replace that by zeroing the signature
bytes and synchronize the block device page using the proper bdev
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_scratch_superblocks open codes scratching super block of a
non-zoned super block.  Split the code to read, zero and write the
superblock for regular devices into a separate helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>

When syncing a log, if we fail to update a log root in the log root tree,
we are aborting the transaction if the failure was not -ENOSPC. This is
excessive because there is a chance that a transaction commit can succeed,
and therefore avoid to turn the filesystem into RO mode. All we need to be
careful about is to mark the log for a full commit, which we already do,
to make sure no one commits a super block pointing to an outdated log root
tree.

So don't abort the transaction if we fail to update a log root in the log
root tree, and log an error if the failure is not -ENOSPC, so that it does
not go completely unnoticed.

CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When syncing the log, if we fail to write log tree extent buffers, we mark
the log for a full commit and abort the transaction. However we don't need
to abort the transaction, all we really need to do is to make sure no one
can commit a superblock pointing to new log tree roots. Just because we
got a failure writing extent buffers for a log tree, it does not mean we
will also fail to do a transaction commit.

One particular case is if due to a bug somewhere, when writing log tree
extent buffers, the tree checker detects some corruption and the writeout
fails because of that. Aborting the transaction can be very disruptive for
a user, specially if the issue happened on a root filesystem. One example
is the scenario in the Link tag below, where an isolated corruption on log
tree leaves was causing transaction aborts when syncing the log.

Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When logging conflicting inodes, if we reach the maximum limit of inodes,
we return BTRFS_LOG_FORCE_COMMIT to force a transaction commit. However
we don't mark the log for full commit (with btrfs_set_log_full_commit()),
which means that once we leave the log transaction and before we commit
the transaction, some other task may sync the log, which is incomplete
as we have not logged all conflicting inodes, leading to some inconsistent
in case that log ends up being replayed.

So also call btrfs_set_log_full_commit() at add_conflicting_inode().

Fixes: e09d94c9 ("btrfs: log conflicting inodes without holding log mutex of the initial inode")
CC: stable@vger.kernel.org # 6.1
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Sometimes we log a directory without holding its VFS lock, so while we
logging it, dir index entries may be added or removed. This typically
happens when logging a dentry from a parent directory that points to a
new directory, through log_new_dir_dentries(), or when while logging
some other inode we also need to log its parent directories (through
btrfs_log_all_parents()).

This means that while we are at log_dir_items(), we may not find a dir
index key we found before, because it was deleted in the meanwhile, so
a call to btrfs_search_slot() may return 1 (key not found). In that case
we return from log_dir_items() with a success value (the variable 'err'
has a value of 0). This can lead to a few problems, specially in the case
where the variable 'last_offset' has a value of (u64)-1 (and it's
initialized to that when it was declared):

1) By returning from log_dir_items() with success (0) and a value of
   (u64)-1 for '*last_offset_ret', we end up not logging any other dir
   index keys that follow the missing, just deleted, index key. The
   (u64)-1 value makes log_directory_changes() not call log_dir_items()
   again;

2) Before returning with success (0), log_dir_items(), will log a dir
   index range item covering a range from the last old dentry index
   (stored in the variable 'last_old_dentry_offset') to the value of
   'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
   if the log is persisted and replayed after a power failure, it will
   cause deletion of all the directory entries that have an index number
   between last_old_dentry_offset + 1 and (u64)-1;

3) We can end up returning from log_dir_items() with
   ctx->last_dir_item_offset having a lower value than
   inode->last_dir_index_offset, because the former is set to the current
   key we are processing at process_dir_items_leaf(), and at the end of
   log_directory_changes() we set inode->last_dir_index_offset to the
   current value of ctx->last_dir_item_offset. So if for example a
   deletion of a lower dir index key happened, we set
   ctx->last_dir_item_offset to that index value, then if we return from
   log_dir_items() because btrfs_search_slot() returned 1, we end up
   returning from log_dir_items() with success (0) and then
   log_directory_changes() sets inode->last_dir_index_offset to a lower
   value than it had before.
   This can result in unpredictable and unexpected behaviour when we
   need to log again the directory in the same transaction, and can result
   in ending up with a log tree leaf that has duplicated keys, as we do
   batch insertions of dir index keys into a log tree.

So fix this by making log_dir_items() move on to the next dir index key
if it does not find the one it was looking for.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When logging a directory, at log_dir_items(), if we get an error when
attempting to search the subvolume tree for a dir index item, we end up
returning 0 (success) from log_dir_items() because 'err' is left with a
value of 0.

This can lead to a few problems, specially in the case the variable
'last_offset' has a value of (u64)-1 (and it's initialized to that when
it was declared):

1) By returning from log_dir_items() with success (0) and a value of
   (u64)-1 for '*last_offset_ret', we end up not logging any other dir
   index keys that follow the missing, just deleted, index key. The
   (u64)-1 value makes log_directory_changes() not call log_dir_items()
   again;

2) Before returning with success (0), log_dir_items(), will log a dir
   index range item covering a range from the last old dentry index
   (stored in the variable 'last_old_dentry_offset') to the value of
   'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
   if the log is persisted and replayed after a power failure, it will
   cause deletion of all the directory entries that have an index number
   between last_old_dentry_offset + 1 and (u64)-1;

3) We can end up returning from log_dir_items() with
   ctx->last_dir_item_offset having a lower value than
   inode->last_dir_index_offset, because the former is set to the current
   key we are processing at process_dir_items_leaf(), and at the end of
   log_directory_changes() we set inode->last_dir_index_offset to the
   current value of ctx->last_dir_item_offset. So if for example a
   deletion of a lower dir index key happened, we set
   ctx->last_dir_item_offset to that index value, then if we return from
   log_dir_items() because btrfs_search_slot() returned an error, we end up
   returning without any error from log_dir_items() and then
   log_directory_changes() sets inode->last_dir_index_offset to a lower
   value than it had before.
   This can result in unpredictable and unexpected behaviour when we
   need to log again the directory in the same transaction, and can result
   in ending up with a log tree leaf that has duplicated keys, as we do
   batch insertions of dir index keys into a log tree.

Fix this by setting 'err' to the value of 'ret' in case
btrfs_search_slot() or btrfs_previous_item() returned an error. That will
result in falling back to a full transaction commit.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
Fixes: e02119d5 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The commit 79417d04 ("btrfs: zoned: disable metadata overcommit for
zoned") disabled the metadata over-commit to track active zones properly.

However, it also introduced a heavy overhead by allocating new metadata
block groups and/or flushing dirty buffers to release the space
reservations. Specifically, a workload (write only without any sync
operations) worsen its performance from 343.77 MB/sec (v5.19) to 182.89
MB/sec (v6.0).

The performance is still bad on current misc-next which is 187.95 MB/sec.
And, with this patch applied, it improves back to 326.70 MB/sec (+73.82%).

This patch introduces a new fs_info->flag BTRFS_FS_NO_OVERCOMMIT to
indicate it needs to disable the metadata over-commit. The flag is enabled
when a device with max active zones limit is loaded into a file-system.

Fixes: 79417d04 ("btrfs: zoned: disable metadata overcommit for zoned")
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
There are some reports from the mailing list that since v6.1 kernel, the
WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during
rescan:

  WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
  CPU: 3 PID: 6424 Comm: snapperd Tainted: P           OE      6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7
  RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
  Call Trace:
   <TASK>
  btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
   ? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
  btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
   btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
   ? __rseq_handle_notify_resume+0xa9/0x4a0
   ? mntput_no_expire+0x4a/0x240
   ? __seccomp_filter+0x319/0x4d0
   __x64_sys_ioctl+0x90/0xd0
   do_syscall_64+0x5b/0x80
   ? syscall_exit_to_user_mode+0x17/0x40
   ? do_syscall_64+0x67/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x7fd9b790d9bf
   </TASK>

[CAUSE]
Since commit e15e9f43 ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if
our qgroup is already in inconsistent state, we will no longer do the
time-consuming backref walk.

This can leave some qgroup records without a valid old_roots ulist.
Normally this is fine, as btrfs_qgroup_account_extents() would also skip
those records if we have NO_ACCOUNTING flag set.

But there is a small window, if we have NO_ACCOUNTING flag set, and
inserted some qgroup_record without a old_roots ulist, but then the user
triggered a qgroup rescan.

During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then
commit current transaction.

And since we have a qgroup_record with old_roots = NULL, we trigger the
WARN_ON() during btrfs_qgroup_account_extents().

[FIX]
Unfortunately due to the introduction of NO_ACCOUNTING flag, the
assumption that every qgroup_record would have its old_roots populated
is no longer correct.

Fix the false alerts and drop the WARN_ON().
Reported-by: Lukas Straub <lukasstraub2@web.de>
Reported-by: HanatoK <summersnow9403@gmail.com>
Fixes: e15e9f43 ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting")
CC: stable@vger.kernel.org # 6.1
Link: https://lore.kernel.org/linux-btrfs/2403c697-ddaf-58ad-3829-0335fc89df09@gmail.com/Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
When test case btrfs/219 (aka, mount a registered device but with a lower
generation) failed, there is not any useful information for the end user
to find out what's going wrong.

The mount failure just looks like this:

  #  mount -o loop /tmp/219.img2 /mnt/btrfs/
  mount: /mnt/btrfs: mount(2) system call failed: File exists.
         dmesg(1) may have more information after failed mount system call.

While the dmesg contains nothing but the loop device change:

  loop1: detected capacity change from 0 to 524288

[CAUSE]
In device_list_add() we have a lot of extra checks to reject invalid
cases.

That function also contains the regular device scan result like the
following prompt:

  BTRFS: device fsid 6222333e-f9f1-47e6-b306-55ddd4dcaef4 devid 1 transid 8 /dev/loop0 scanned by systemd-udevd (3027)

But unfortunately not all errors have their own error messages, thus if
we hit something wrong in device_add_list(), there may be no error
messages at all.

[FIX]
Add errors message for all non-ENOMEM errors.

For ENOMEM, I'd say we're in a much worse situation, and there should be
some OOM messages way before our call sites.

CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
Even with commit 81d5d614 ("btrfs: enhance unsupported compat RO
flags handling"), btrfs can still mount a fs with unsupported compat_ro
flags read-only, then remount it RW:

  # btrfs ins dump-super /dev/loop0 | grep compat_ro_flags -A 3
  compat_ro_flags		0x403
			( FREE_SPACE_TREE |
			  FREE_SPACE_TREE_VALID |
			  unknown flag: 0x400 )

  # mount /dev/loop0 /mnt/btrfs
  mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
         dmesg(1) may have more information after failed mount system call.
  ^^^ RW mount failed as expected ^^^

  # dmesg -t | tail -n5
  loop0: detected capacity change from 0 to 1048576
  BTRFS: device fsid cb5b82f5-0fdd-4d81-9b4b-78533c324afa devid 1 transid 7 /dev/loop0 scanned by mount (1146)
  BTRFS info (device loop0): using crc32c (crc32c-intel) checksum algorithm
  BTRFS info (device loop0): using free space tree
  BTRFS error (device loop0): cannot mount read-write because of unknown compat_ro features (0x403)
  BTRFS error (device loop0): open_ctree failed

  # mount /dev/loop0 -o ro /mnt/btrfs
  # mount -o remount,rw /mnt/btrfs
  ^^^ RW remount succeeded unexpectedly ^^^

[CAUSE]
Currently we use btrfs_check_features() to check compat_ro flags against
our current mount flags.

That function get reused between open_ctree() and btrfs_remount().

But for btrfs_remount(), the super block we passed in still has the old
mount flags, thus btrfs_check_features() still believes we're mounting
read-only.

[FIX]
Replace the existing @sb argument with @is_rw_mount.

As originally we only use @sb to determine if the mount is RW.

Now it's callers' responsibility to determine if the mount is RW, and
since there are only two callers, the check is pretty simple:

- caller in open_ctree()
  Just pass !sb_rdonly().

- caller in btrfs_remount()
  Pass !(*flags & SB_RDONLY), as our check should be against the new
  flags.

Now we can correctly reject the RW remount:

  # mount /dev/loop0 -o ro /mnt/btrfs
  # mount -o remount,rw /mnt/btrfs
  mount: /mnt/btrfs: mount point not mounted or bad option.
         dmesg(1) may have more information after failed mount system call.
  # dmesg -t | tail -n 1
  BTRFS error (device loop0: state M): cannot mount read-write because of unknown compat_ro features (0x403)
Reported-by: Chung-Chiang Cheng <shepjeng@gmail.com>
Fixes: 81d5d614 ("btrfs: enhance unsupported compat RO flags handling")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but
if end users hit such problem, there will be no chance that
btrfs_debug() is enabled.  This can lead to very little useful info for
debugging.

This patch will:

- Add extra info for error reporting
  Including:
  * logical bytenr
  * num_bytes
  * type
  * action
  * ref_mod

- Replace the btrfs_debug() with btrfs_err()

- Move the error reporting into run_one_delayed_ref()
  This is to avoid use-after-free, the @node can be freed in the caller.

This error should only be triggered at most once.

As if run_one_delayed_ref() failed, we trigger the error message, then
causing the call chain to error out:

btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs()
   `- btrfs_run_delayed_refs_for_head()
      `- run_one_delayed_ref()

And we will abort the current transaction in btrfs_run_delayed_refs().
If we have to run delayed refs for the abort transaction,
run_one_delayed_ref() will just cleanup the refs and do nothing, thus no
new error messages would be output.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:

  BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
  kernel BUG at fs/btrfs/extent_io.c:2380!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G           OE      6.0.0-5-amd64 #1  Debian 6.0.10-2
  Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
  Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
  RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
  Call Trace:
   <TASK>
   clean_io_failure+0x14d/0x180 [btrfs]
   end_bio_extent_readpage+0x412/0x6e0 [btrfs]
   ? __switch_to+0x106/0x420
   process_one_work+0x1c7/0x380
   worker_thread+0x4d/0x380
   ? rescuer_thread+0x3a0/0x3a0
   kthread+0xe9/0x110
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x22/0x30

[CAUSE]

Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).

Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.

The check looks like this:

		ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
				      &map_length, &bioc, mirror_num);
		if (ret)
			goto out_counter_dec;
		BUG_ON(mirror_num != bioc->mirror_num);

But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:

	if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
	    !need_full_stripe(op) && dev_replace->tgtdev != NULL) {
		ret = get_extra_mirror_from_replace(fs_info, logical, *length,
						    dev_replace->srcdev->devid,
						    &mirror_num,
					    &physical_to_patch_in_first_stripe);
		patch_the_first_stripe_for_dev_replace = 1;
	}

Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().

But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.

Thus in that case, we don't need to do anything but let the replace
routine to handle it.

[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device.
Reported-by: 小太 <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYyJGQZ+yvjzxA1Nn2LuqkYqTCcUH43S=+wXhyf8S00Ag@mail.gmail.com/
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

During lseek, when searching for delalloc in a range that represents a
hole and that range has a length of 1 byte, we end up not doing the actual
delalloc search in the inode's io tree, resulting in not correctly
reporting the offset with data or a hole. This actually only happens when
the start offset is 0 because with any other start offset we round it down
by sector size.

Reproducer:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt/sdc

  $ xfs_io -f -c "pwrite -q 0 1" /mnt/sdc/foo

  $ xfs_io -c "seek -d 0" /mnt/sdc/foo
  Whence   Result
  DATA	   EOF

It should have reported an offset of 0 instead of EOF.

Fix this by updating btrfs_find_delalloc_in_range() and count_range_bits()
to deal with inclusive ranges properly. These functions are already
supposed to work with inclusive end offsets, they just got it wrong in a
couple places due to off-by-one mistakes.

A test case for fstests will be added later.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/20221223020509.457113-1-joanbrugueram@gmail.com/
Fixes: b6e83356 ("btrfs: make hole and data seeking a lot more efficient")
CC: stable@vger.kernel.org # 6.1
Tested-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
There is a bug report that on a RAID0 NVMe btrfs system, under heavy
write load the filesystem can flip RO randomly.

With extra debugging, it shows some tree blocks failed to pass their
level checks, and if that happens at critical path of a transaction, we
abort the transaction:

  BTRFS error (device nvme0n1p3): level verify failed on logical 5446121209856 mirror 1 wanted 0 found 1
  BTRFS error (device nvme0n1p3: state A): Transaction aborted (error -5)
  BTRFS: error (device nvme0n1p3: state A) in btrfs_finish_ordered_io:3343: errno=-5 IO failure
  BTRFS info (device nvme0n1p3: state EA): forced readonly

[CAUSE]
The reporter has already bisected to commit 947a6299 ("btrfs: move
tree block parentness check into validate_extent_buffer()").

And with extra debugging, it shows we can have btrfs_tree_parent_check
filled with all zeros in the following call trace:

  submit_one_bio+0xd4/0xe0
  submit_extent_page+0x142/0x550
  read_extent_buffer_pages+0x584/0x9c0
  ? __pfx_end_bio_extent_readpage+0x10/0x10
  ? folio_unlock+0x1d/0x50
  btrfs_read_extent_buffer+0x98/0x150
  read_tree_block+0x43/0xa0
  read_block_for_search+0x266/0x370
  btrfs_search_slot+0x351/0xd30
  ? lock_is_held_type+0xe8/0x140
  btrfs_lookup_csum+0x63/0x150
  btrfs_csum_file_blocks+0x197/0x6c0
  ? sched_clock_cpu+0x9f/0xc0
  ? lock_release+0x14b/0x440
  ? _raw_read_unlock+0x29/0x50
  btrfs_finish_ordered_io+0x441/0x860
  btrfs_work_helper+0xfe/0x400
  ? lock_is_held_type+0xe8/0x140
  process_one_work+0x294/0x5b0
  worker_thread+0x4f/0x3a0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xf5/0x120
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x2c/0x50

Currently we only copy the btrfs_tree_parent_check structure into bbio
at read_extent_buffer_pages() after we have assembled the bbio.

But as shown above, submit_extent_page() itself can already submit the
bbio, leaving the bbio->parent_check uninitialized, and cause the false
alert.

[FIX]
Instead of copying @check into bbio after bbio is assembled, we pass
@check in btrfs_bio_ctrl::parent_check, and copy the content of
parent_check in submit_one_bio() for metadata read.

By this we should be able to pass the needed info for metadata endio
verification, and fix the false alert.
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CABXGCsNzVxo4iq-tJSGm_kO1UggHXgq6CdcHDL=z5FL4njYXSQ@mail.gmail.com/
Fixes: 947a6299 ("btrfs: move tree block parentness check into validate_extent_buffer()")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

From a recent regression report, we found that after commit 947a6299
("btrfs: move tree block parentness check into
validate_extent_buffer()") if we have a level mismatch (false alert
though), there is no error message at all.

This makes later debugging harder.  This patch will add the proper error
message for such case.

Link: https://lore.kernel.org/linux-btrfs/CABXGCsNzVxo4iq-tJSGm_kO1UggHXgq6CdcHDL=z5FL4njYXSQ@mail.gmail.com/Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The em->len value is supposed to be verified in the assertion condition
though we expect it to be same as the sectorsize.

Fixes: a196a894 ("btrfs: do not reset extent map members for inline extents read")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When logging a new name, we don't expect to fail joining a log transaction
since we know at least one of the inodes was logged before in the current
transaction. However if we fail for some unexpected reason, we end up not
freeing the fscrypt name we previously allocated. So fix that by freeing
the name in case we failed to join a log transaction.

Fixes: ab3c5c18 ("btrfs: setup qstr from dentrys using fscrypt helper")
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Commit 75b47033 ("btrfs: raid56: migrate recovery and scrub recovery
path to use error_bitmap") introduced an uninitialized return variable.

This can be caught by gcc 12.1 by -Wmaybe-uninitialized:

  CC [M]  fs/btrfs/raid56.o
fs/btrfs/raid56.c: In function ‘scrub_rbio’:
fs/btrfs/raid56.c:2801:15: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
 2801 |         ret = recover_scrub_rbio(rbio);
      |               ^~~~~~~~~~~~~~~~~~~~~~~~
fs/btrfs/raid56.c:2649:13: note: ‘ret’ was declared here
 2649 |         int ret;

The warning is disabled by default so we haven't caught that.

Due to the bug the raid56 scrub fstests have been failing since the
patch was merged, so initialize that.

Fixes: 75b47033 ("btrfs: raid56: migrate recovery and scrub recovery path to use error_bitmap")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If a file consists of an inline extent followed by a regular or prealloc
extent, then a legitimate attempt to resolve a logical address in the
non-inline region will result in add_all_parents reading the invalid
offset field of the inline extent. If the inline extent item is placed
in the leaf eb s.t. it is the first item, attempting to access the
offset field will not only be meaningless, it will go past the end of
the eb and cause this panic:

  [17.626048] BTRFS warning (device dm-2): bad eb member end: ptr 0x3fd4 start 30834688 member offset 16377 size 8
  [17.631693] general protection fault, probably for non-canonical address 0x5088000000000: 0000 [#1] SMP PTI
  [17.635041] CPU: 2 PID: 1267 Comm: btrfs Not tainted 5.12.0-07246-g75175d5adc74-dirty #199
  [17.637969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [17.641995] RIP: 0010:btrfs_get_64+0xe7/0x110
  [17.649890] RSP: 0018:ffffc90001f73a08 EFLAGS: 00010202
  [17.651652] RAX: 0000000000000001 RBX: ffff88810c42d000 RCX: 0000000000000000
  [17.653921] RDX: 0005088000000000 RSI: ffffc90001f73a0f RDI: 0000000000000001
  [17.656174] RBP: 0000000000000ff9 R08: 0000000000000007 R09: c0000000fffeffff
  [17.658441] R10: ffffc90001f73790 R11: ffffc90001f73788 R12: ffff888106afe918
  [17.661070] R13: 0000000000003fd4 R14: 0000000000003f6f R15: cdcdcdcdcdcdcdcd
  [17.663617] FS:  00007f64e7627d80(0000) GS:ffff888237c80000(0000) knlGS:0000000000000000
  [17.666525] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [17.668664] CR2: 000055d4a39152e8 CR3: 000000010c596002 CR4: 0000000000770ee0
  [17.671253] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [17.673634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [17.676034] PKRU: 55555554
  [17.677004] Call Trace:
  [17.677877]  add_all_parents+0x276/0x480
  [17.679325]  find_parent_nodes+0xfae/0x1590
  [17.680771]  btrfs_find_all_leafs+0x5e/0xa0
  [17.682217]  iterate_extent_inodes+0xce/0x260
  [17.683809]  ? btrfs_inode_flags_to_xflags+0x50/0x50
  [17.685597]  ? iterate_inodes_from_logical+0xa1/0xd0
  [17.687404]  iterate_inodes_from_logical+0xa1/0xd0
  [17.689121]  ? btrfs_inode_flags_to_xflags+0x50/0x50
  [17.691010]  btrfs_ioctl_logical_to_ino+0x131/0x190
  [17.692946]  btrfs_ioctl+0x104a/0x2f60
  [17.694384]  ? selinux_file_ioctl+0x182/0x220
  [17.695995]  ? __x64_sys_ioctl+0x84/0xc0
  [17.697394]  __x64_sys_ioctl+0x84/0xc0
  [17.698697]  do_syscall_64+0x33/0x40
  [17.700017]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [17.701753] RIP: 0033:0x7f64e72761b7
  [17.709355] RSP: 002b:00007ffefb067f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [17.712088] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f64e72761b7
  [17.714667] RDX: 00007ffefb067fb0 RSI: 00000000c0389424 RDI: 0000000000000003
  [17.717386] RBP: 00007ffefb06d188 R08: 000055d4a390d2b0 R09: 00007f64e7340a60
  [17.719938] R10: 0000000000000231 R11: 0000000000000246 R12: 0000000000000001
  [17.722383] R13: 0000000000000000 R14: 00000000c0389424 R15: 000055d4a38fd2a0
  [17.724839] Modules linked in:

Fix the bug by detecting the inline extent item in add_all_parents and
skipping to the next extent item.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>

Fix a typo of printing FLUSH_DELAYED_REFS event in flush_space() as
FLUSH_ELAYED_REFS.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In the patch a2c8d27e ("btrfs: use a structure to pass arguments to
backref walking functions") Filipe converted everybody to using a new
context struct to use for backref lookups, but accidentally dropped the
BTRFS_SEQ_LAST usage that exists for qgroups.  Add this back so we have
the previous behavior.

Fixes: a2c8d27e ("btrfs: use a structure to pass arguments to backref walking functions")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When removing the btrfs module we are not calling btrfs_cleanup_fs_uuids()
which results in leaking btrfs_fs_devices structures and other resources.
This is a regression recently introduced by a refactoring of the module
initialization and exit sequence, which simply removed the call to
btrfs_cleanup_fs_uuids() in the exit path, resulting in the leaks.

So fix this by calling btrfs_cleanup_fs_uuids() at exit_btrfs_fs().

Fixes: 5565b8e0 ("btrfs: make module init/exit match their sequence")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

All error handling paths end to 'out', except this memory allocation
failure.

This is spurious. So branch to the error handling path also in this case.
It will add a call to:

	memset(&root->defrag_progress, 0,
	       sizeof(root->defrag_progress));

Fixes: 6702ed49 ("Btrfs: Add run time btree defrag, and an ioctl to force btree defrag")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If new_whiteout_inode() fails, some resources need to be freed.
Add the missing goto to the error handling path.

Fixes: ab3c5c18 ("btrfs: setup qstr from dentrys using fscrypt helper")
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently we print the transaction aborted message with a debug level, but
a transaction abort is an exceptional event that indicates something went
wrong and it's useful to have it printed with an error level as it helps
analysing problems in a production environment, where debug level messages
are typically not logged. For example reports from syzbot never include
the transaction aborted message, since the log level on the test machines
is above the debug level.

So change the log level from debug to error.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When syncing this code into btrfs-progs Dave noticed there's some things
we were losing in the sync that are needed.  This syncs those changes
into the kernel, which include a few comments that weren't in the
kernel, some whitespace changes, an attribute, and the cplusplus bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If we get -ENOMEM while dropping file extent items in a given range, at
btrfs_drop_extents(), due to failure to allocate memory when attempting to
increment the reference count for an extent or drop the reference count,
we handle it with a BUG_ON(). This is excessive, instead we can simply
abort the transaction and return the error to the caller. In fact most
callers of btrfs_drop_extents(), directly or indirectly, already abort
the transaction if btrfs_drop_extents() returns any error.

Also, we already have error paths at btrfs_drop_extents() that may return
-ENOMEM and in those cases we abort the transaction, like for example
anything that changes the b+tree may return -ENOMEM due to a failure to
allocate a new extent buffer when COWing an existing extent buffer, such
as a call to btrfs_duplicate_item() for example.

So replace the BUG_ON() calls with proper logic to abort the transaction
and return the error.

Reported-by: syzbot+0b1fb6b0108c27419f9f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000089773e05ee4b9cb4@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Store the error code before freeing the extent_map. Though it's
reference counted structure, in that function it's the first and last
allocation so this would lead to a potential use-after-free.

The error can happen eg. when chunk is stored on a missing device and
the degraded mount option is missing.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721Reported-by: eriri <1527030098@qq.com>
Fixes: adfb69af ("btrfs: add_missing_dev() should return the actual error")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: void0red <void0red@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

As of commit 193df624 ("btrfs: search for last logged dir index if
it's not cached in the inode"), the overwrite_item() function is always
called for a root that is from a fs/subvolume tree. In other words, now
it's only used during log replay to modify a fs/subvolume tree. Therefore
we can remove the logic that checks if we are dealing with a log tree at
overwrite_item().

So remove that logic, replacing it with an assertion and document that if
we ever need to support a log root there, we will need to clone the leaf
from the fs/subvolume tree and then release it before modifying the log
tree, which is needed to avoid a potential deadlock, similar to the one
recently fixed by a patch with the subject:

  "btrfs: do not modify log tree while holding a leaf from fs tree locked"
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

After commit 193df624 ("btrfs: search for last logged dir index if
it's not cached in the inode"), there are no more callers of
do_overwrite_item(), except overwrite_item().

Originally both used to be the same function, but were split in
commit 086dcbfa ("btrfs: insert items in batches when logging a
directory when possible"), as there was the need to execute all logic
of overwrite_item() but skip the tree search, since in the context of
directory logging we already had a path with a leaf to copy data from.

So unify them again as there is no more need to have them split.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Using strncpy() on NUL-terminated strings are deprecated.  To avoid
possible forming of non-terminated string strscpy() should be used.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This was caught when syncing extent-io-tree.c into btrfs-progs.  This
however isn't really a problem, the only way next would be uninitialized
is if we found the range we were looking for, and in this case we don't
care about next.  However it's a compile error, so fix it up.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

I don't know how this isn't caught when we build this in the kernel, but
while syncing extent-io-tree.c into btrfs-progs I got an error because
parent could potentially be uninitialized when we link in a new node,
specifically when the extent_io_tree is empty.  This means we could have
garbage in the parent color.  I don't know what the ramifications are of
that, but it's probably not great, so fix this by initializing parent to
NULL.  I spot checked all of our other usages in btrfs and we appear to
be doing the correct thing everywhere else.

Fixes: c7e118cf ("btrfs: open code rbtree search in insert_state")
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Add annotations to functions that might sleep due to allocations or IO
and could be called from various contexts. In case of btrfs_search_slot
it's not obvious why it would sleep:

    btrfs_search_slot
      setup_nodes_for_search
        reada_for_balance
          btrfs_readahead_node_child
            btrfs_readahead_tree_block
              btrfs_find_create_tree_block
                alloc_extent_buffer
                  kmem_cache_zalloc
                    /* allocate memory non-atomically, might sleep */
                    kmem_cache_alloc(GFP_NOFS|__GFP_NOFAIL|__GFP_ZERO)
              read_extent_buffer_pages
                submit_extent_page
                  /* disk IO, might sleep */
                  submit_one_bio

Other examples where the sleeping could happen is in 3 places might
sleep in update_qgroup_limit_item(), as shown below:

  update_qgroup_limit_item
    btrfs_alloc_path
      /* allocate memory non-atomically, might sleep */
      kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS)
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>