- 15 Feb, 2019 3 commits
-
-
Iuliana Prodan authored
Add ecb mode support for aes, des, 3des and arc4 ciphers. ecb(*) reuses existing skcipher implementation, updating it with support for no IV. Signed-off-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Iuliana Prodan authored
Some arc4 cipher algorithm defines show up in two places: crypto/arc4.c and drivers/crypto/bcm/cipher.h. Let's export them in a common header and update their users. Signed-off-by:
-
Iuliana Prodan authored
The mapped_{src,dst}_nents _returned_ from the dma_map_sg call (which could be less than src/dst_nents) have to be used to generate the aead, skcipher job descriptors. Signed-off-by:
-
- 08 Feb, 2019 23 commits
-
-
Herbert Xu authored
This patch removes an unused label. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f0fcf9ad ("crypto: qat - no need to check return...") Signed-off-by:
-
Gilad Ben-Yossef authored
The best-laid plans of mice and men often go awry. Remove Yael C. as co-maintainer as she moved on to other endeavours. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Eric Biggers authored
Check that algorithms do not change the aead_request structure, as users may rely on submitting the request again (e.g. after copying new data into the same source buffer) without reinitializing everything. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
Check that algorithms do not change the skcipher_request structure, as users may rely on submitting the request again (e.g. after copying new data into the same source buffer) without reinitializing everything. Signed-off-by:
-
Eric Biggers authored
Convert alg_test_hash() to use the new test framework, adding a list of testvec_configs to test by default. When the extra self-tests are enabled, randomly generated testvec_configs are tested as well. This improves hash test coverage mainly because now all algorithms have a variety of data layouts tested, whereas before each algorithm was responsible for declaring its own chunked test cases which were often missing or provided poor test coverage. The new code also tests both the MAY_SLEEP and !MAY_SLEEP cases and buffers that cross pages. This already found bugs in the hash walk code and in the arm32 and arm64 implementations of crct10dif. I removed the hash chunked test vectors that were the same as non-chunked ones, but left the ones that were unique. Signed-off-by:
-
Eric Biggers authored
Convert alg_test_aead() to use the new test framework, using the same list of testvec_configs that skcipher testing uses. This significantly improves AEAD test coverage mainly because previously there was only very limited test coverage of the possible data layouts. Now the data layouts to test are listed in one place for all algorithms and optionally are also randomly generated. In fact, only one AEAD algorithm (AES-GCM) even had a chunked test case before. This already found bugs in all the AEGIS and MORUS implementations, the x86 AES-GCM implementation, and the arm64 AES-CCM implementation. I removed the AEAD chunked test vectors that were the same as non-chunked ones, but left the ones that were unique. Note: the rewritten test code allocates an aead_request just once per algorithm rather than once per encryption/decryption, but some AEAD algorithms incorrectly change the tfm pointer in the request. It's nontrivial to fix these, so to move forward I'm temporarily working around it by resetting the tfm pointer. But they'll need to be fixed. Signed-off-by:
-
Eric Biggers authored
Convert alg_test_skcipher() to use the new test framework, adding a list of testvec_configs to test by default. When the extra self-tests are enabled, randomly generated testvec_configs are tested as well. This improves skcipher test coverage mainly because now all algorithms have a variety of data layouts tested, whereas before each algorithm was responsible for declaring its own chunked test cases which were often missing or provided poor test coverage. The new code also tests both the MAY_SLEEP and !MAY_SLEEP cases, different IV alignments, and buffers that cross pages. This has already found a bug in the arm64 ctr-aes-neonbs algorithm. It would have easily found many past bugs. I removed the skcipher chunked test vectors that were the same as non-chunked ones, but left the ones that were unique. Signed-off-by:
-
Eric Biggers authored
Add functions that generate a random testvec_config, in preparation for using it for randomized fuzz tests. Signed-off-by:
-
Eric Biggers authored
To achieve more comprehensive crypto test coverage, I'd like to add fuzz tests that use random data layouts and request flags. To be most effective these tests should be part of testmgr, so they automatically run on every algorithm registered with the crypto API. However, they will take much longer to run than the current tests and therefore will only really be intended to be run by developers, whereas the current tests have a wider audience. Therefore, add a new kconfig option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that can be set by developers to enable these extra, expensive tests. Similar to the regular tests, also add a module parameter cryptomgr.noextratests to support disabling the tests. Finally, another module parameter cryptomgr.fuzz_iterations is added to control how many iterations the fuzz tests do. Note: for now setting this to 0 will be equivalent to cryptomgr.noextratests=1. But I opted for separate parameters to provide more flexibility to add other types of tests under the "extra tests" category in the future. Signed-off-by:
-
Eric Biggers authored
Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by:
-
Eric Biggers authored
The arm64 NEON bit-sliced implementation of AES-CTR fails the improved skcipher tests because it sometimes produces the wrong ciphertext. The bug is that the final keystream block isn't returned from the assembly code when the number of non-final blocks is zero. This can happen if the input data ends a few bytes after a page boundary. In this case the last bytes get "encrypted" by XOR'ing them with uninitialized memory. Fix the assembly code to return the final keystream block when needed. Fixes: 88a3f582 ("crypto: arm64/aes - don't use IV buffer to return final keystream block") Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Eric Biggers authored
Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and "michael_mic", fail the improved hash tests because they sometimes produce the wrong digest. The bug is that in the case where a scatterlist element crosses pages, not all the data is actually hashed because the scatterlist walk terminates too early. This happens because the 'nbytes' variable in crypto_hash_walk_done() is assigned the number of bytes remaining in the page, then later interpreted as the number of bytes remaining in the scatterlist element. Fix it. Fixes: 900a081f ("crypto: ahash - Fix early termination in hash walk") Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
gcmaes_crypt_by_sg() dereferences the NULL pointer returned by scatterwalk_ffwd() when encrypting an empty plaintext and the source scatterlist ends immediately after the associated data. Fix it by only fast-forwarding to the src/dst data scatterlists if the data length is nonzero. This bug is reproduced by the "rfc4543(gcm(aes))" test vectors when run with the new AEAD test manager. Fixes: e8455207 ("crypto: aesni - Update aesni-intel_glue to use scatter/gather") Cc: <stable@vger.kernel.org> # v4.17+ Cc: Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Eric Biggers authored
The x86 MORUS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can incorrectly sleep in the skcipher_walk_*() functions while preemption has been disabled by kernel_fpu_begin(). Fix these bugs. Fixes: 56e8e57f ("crypto: morus - Add common SIMD glue code for MORUS") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
The x86 AEGIS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can incorrectly sleep in the skcipher_walk_*() functions while preemption has been disabled by kernel_fpu_begin(). Fix these bugs. Fixes: 1d373d4e ("crypto: x86 - Add optimized AEGIS implementations") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
The generic MORUS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Fix them. Fixes: 396be41f ("crypto: morus - Add generic MORUS AEAD implementations") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
The generic AEGIS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Fix them. Fixes: f606a88e ("crypto: aegis - Add generic AEGIS AEAD implementations") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Pankaj Gupta authored
when the source sg contains more than 1 fragment and destination sg contains 1 fragment, the caam driver mishandle the buffers to be sent to caam. Fixes: f2147b88 ("crypto: caam - Convert GCM to new AEAD interface") Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by:
Pankaj Gupta <pankaj.gupta@nxp.com> Signed-off-by:
Arun Pathak <arun.pathak@nxp.com> Reviewed-by:
-
Eric Biggers authored
The x86, arm, and arm64 asm implementations of crct10dif are very difficult to understand partly because many of the comments, labels, and macros are named incorrectly: the lengths mentioned are usually off by a factor of two from the actual code. Many other things are unnecessarily convoluted as well, e.g. there are many more fold constants than actually needed and some aren't fully reduced. This series therefore cleans up all these implementations to be much more maintainable. I also made some small optimizations where I saw opportunities, resulting in slightly better performance. This patch cleans up the arm64 version. Acked-by:
-
Eric Biggers authored
The x86, arm, and arm64 asm implementations of crct10dif are very difficult to understand partly because many of the comments, labels, and macros are named incorrectly: the lengths mentioned are usually off by a factor of two from the actual code. Many other things are unnecessarily convoluted as well, e.g. there are many more fold constants than actually needed and some aren't fully reduced. This series therefore cleans up all these implementations to be much more maintainable. I also made some small optimizations where I saw opportunities, resulting in slightly better performance. This patch cleans up the arm version. (Also moved the constants to .rodata as suggested by Ard Biesheuvel.) Acked-by:
-
Eric Biggers authored
The x86, arm, and arm64 asm implementations of crct10dif are very difficult to understand partly because many of the comments, labels, and macros are named incorrectly: the lengths mentioned are usually off by a factor of two from the actual code. Many other things are unnecessarily convoluted as well, e.g. there are many more fold constants than actually needed and some aren't fully reduced. This series therefore cleans up all these implementations to be much more maintainable. I also made some small optimizations where I saw opportunities, resulting in slightly better performance. This patch cleans up the x86 version. As part of this, I removed support for len < 16 from the x86 assembly; now the glue code falls back to the generic table-based implementation in this case. Due to the overhead of kernel_fpu_begin(), this actually significantly improves performance on these lengths. (And even if kernel_fpu_begin() were free, the generic code is still faster for about len < 11.) This removal also eliminates error-prone special cases and makes the x86, arm32, and arm64 ports of the code match more closely. Acked-by:
-
Singh, Brijesh authored
A kexec reboot may leave the firmware in INIT or WORKING state. Currently, we issue PLATFORM_INIT command during the probe without checking the current state. The PLATFORM_INIT command fails if the FW is already in INIT state. Lets check the current state, if FW is not in UNINIT state then transition it to UNINIT before initializing or upgrading the FW. Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary Hook <gary.hook@amd.com> Reviewed-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Christopher Diaz Riveros authored
Fixes coccinnelle alerts: /crypto/testmgr.c:2112:13-20: WARNING opportunity for kmemdup /crypto/testmgr.c:2130:13-20: WARNING opportunity for kmemdup /crypto/testmgr.c:2152:9-16: WARNING opportunity for kmemdup Signed-off-by:
Christopher Diaz Riveros <chrisadr@gentoo.org> Signed-off-by:
-
- 01 Feb, 2019 14 commits
-
-
Ard Biesheuvel authored
The arm64 CRC-T10DIF implementation either uses 8-bit or 64-bit polynomial multiplication instructions, since the latter are faster but not mandatory in the architecture. Since that prevents us from testing both implementations on the same system, let's expose both implementations to the crypto API, with the priorities reflecting that the P64 version is the preferred one if available. Signed-off-by:
-
Ard Biesheuvel authored
Remove some code that is no longer called now that we make sure never to invoke the SIMD routine with less than 16 bytes of input. Reviewed-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
Remove some code that is no longer called now that we make sure never to invoke the SIMD routine with less that 16 bytes of input. Reviewed-by:
-
Ard Biesheuvel authored
The SIMD routine ported from x86 used to have a special code path for inputs < 16 bytes, which got lost somewhere along the way. Instead, the current glue code aligns the input pointer to 16 bytes, which is not really necessary on this architecture (although it could be beneficial to performance to expose aligned data to the the NEON routine), but this could result in inputs of less than 16 bytes to be passed in. This not only fails the new extended tests that Eric has implemented, it also results in the code reading past the end of the input, which could potentially result in crashes when dealing with less than 16 bytes of input at the end of a page which is followed by an unmapped page. So update the glue code to only invoke the NEON routine if the input is at least 16 bytes. Reported-by:
-
Ard Biesheuvel authored
The SIMD routine ported from x86 used to have a special code path for inputs < 16 bytes, which got lost somewhere along the way. Instead, the current glue code aligns the input pointer to permit the NEON routine to use special versions of the vld1 instructions that assume 16 byte alignment, but this could result in inputs of less than 16 bytes to be passed in. This not only fails the new extended tests that Eric has implemented, it also results in the code reading past the end of the input, which could potentially result in crashes when dealing with less than 16 bytes of input at the end of a page which is followed by an unmapped page. So update the glue code to only invoke the NEON routine if the input is at least 16 bytes. Reported-by:
-
Horia Geantă authored
Roland reports the following issue and provides a root cause analysis: "On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a warning is generated when accessing files on a filesystem for which IMA measurement is enabled: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120 caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=b668049e] Modules linked in: CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-20181214-1 #2 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c010efb8>] (dump_backtrace) from [<c010f2d0>] (show_stack+0x20/0x24) [<c010f2b0>] (show_stack) from [<c08b04f4>] (dump_stack+0xa0/0xcc) [<c08b0454>] (dump_stack) from [<c012b610>] (__warn+0xf0/0x108) [<c012b520>] (__warn) from [<c012b680>] (warn_slowpath_fmt+0x58/0x74) [<c012b62c>] (warn_slowpath_fmt) from [<c0199acc>] (check_for_stack.part.9+0xd0/0x120) [<c01999fc>] (check_for_stack.part.9) from [<c019a040>] (debug_dma_map_page+0x144/0x174) [<c0199efc>] (debug_dma_map_page) from [<c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0) [<c065f240>] (ahash_final_ctx) from [<c065b3c4>] (ahash_final+0x1c/0x20) [<c065b3a8>] (ahash_final) from [<c03fe278>] (crypto_ahash_op+0x38/0x80) [<c03fe240>] (crypto_ahash_op) from [<c03fe2e0>] (crypto_ahash_final+0x20/0x24) [<c03fe2c0>] (crypto_ahash_final) from [<c03f19a8>] (ima_calc_file_hash+0x29c/0xa40) [<c03f170c>] (ima_calc_file_hash) from [<c03f2b24>] (ima_collect_measurement+0x1dc/0x240) [<c03f2948>] (ima_collect_measurement) from [<c03f0a60>] (process_measurement+0x4c4/0x6b8) [<c03f059c>] (process_measurement) from [<c03f0cdc>] (ima_file_check+0x88/0xa4) [<c03f0c54>] (ima_file_check) from [<c02d8adc>] (path_openat+0x5d8/0x1364) [<c02d8504>] (path_openat) from [<c02dad24>] (do_filp_open+0x84/0xf0) [<c02daca0>] (do_filp_open) from [<c02cf50c>] (do_open_execat+0x84/0x1b0) [<c02cf488>] (do_open_execat) from [<c02d1058>] (__do_execve_file+0x43c/0x890) [<c02d0c1c>] (__do_execve_file) from [<c02d1770>] (sys_execve+0x44/0x4c) [<c02d172c>] (sys_execve) from [<c0101000>] (ret_fast_syscall+0x0/0x28) ---[ end trace 3455789a10e3aefd ]--- The cause is that the struct ahash_request *req is created as a stack-local variable up in the stack (presumably somewhere in the IMA implementation), then passed down into the CAAM driver, which tries to dma_single_map the req->result (indirectly via map_seq_out_ptr_result) in order to make that buffer available for the CAAM to store the result of the following hash operation. The calling code doesn't know how req will be used by the CAAM driver, and there could be other such occurrences where stack memory is passed down to the CAAM driver. Therefore we should rather fix this issue in the CAAM driver where the requirements are known." Fix this problem by: -instructing the crypto engine to write the final hash in state->caam_ctx -subsequently memcpy-ing the final hash into req->result Cc: <stable@vger.kernel.org> # v4.19+ Reported-by:Roland Hieber <rhi@pengutronix.de> Signed-off-by:
-
Ard Biesheuvel authored
The arm64 GHASH implementation either uses 8-bit or 64-bit polynomial multiplication instructions, since the latter are faster but not mandatory in the architecture. Since that prevents us from testing both implementations on the same system, let's expose both implementations to the crypto API, with the priorities reflecting that the P64 version is the preferred one if available. Signed-off-by:
-
Milan Broz authored
The CRC32 is not a cryptographic hash algorithm, so the FIPS restrictions should not apply to it. (The CRC32C variant is already allowed.) This CRC32 variant is used for in dm-crypt legacy TrueCrypt IV implementation (tcw); detected by cryptsetup test suite failure in FIPS mode. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Reviewed-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Masahiro Yamada authored
The header search path -I. in kernel Makefiles is very suspicious; it allows the compiler to search for headers in the top of $(srctree), where obviously no header file exists. 'git grep BCMDRIVER' has no hit. So, this macro is not referenced. I was able to build this driver without the extra compiler options. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by:
-
Ard Biesheuvel authored
When the AES-CCM code was first added, the NEON register were saved and restored eagerly, and so the code avoided doing so, and executed the scatterwalk in atomic context inside the kernel_neon_begin/end section. This has been changed in the meantime, so switch to non-atomic scatterwalks. Fixes: bd2ad885 ("crypto: arm64/aes-ce-ccm - move kernel mode neon ...") Signed-off-by:
-
Ard Biesheuvel authored
Commit 5092fcf3 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic fallback") introduced C fallback code to replace the NEON routines when invoked from a context where the NEON is not available (i.e., from the context of a softirq taken while the NEON is already being used in kernel process context) Fix two logical flaws in the MAC calculation of the associated data. Reported-by:
-
Ard Biesheuvel authored
The NEON MAC calculation routine fails to handle the case correctly where there is some data in the buffer, and the input fills it up exactly. In this case, we enter the loop at the end with w8 == 0, while a negative value is assumed, and so the loop carries on until the increment of the 32-bit counter wraps around, which is quite obviously wrong. So omit the loop altogether in this case, and exit right away. Reported-by:
-
Eric Biggers authored
Instantiating "cryptd(crc32c)" causes a crypto self-test failure because the crypto_alloc_shash() in alg_test_crc32c() fails. This is because cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can only be accessed through the ahash API, unlike shash algorithms which can be accessed through both the ahash and shash APIs. As the test is testing the shash descriptor format which is only applicable to shash algorithms, skip it for ahash algorithms. (Note that it's still important to fix crypto self-test failures even for weird algorithm instantiations like cryptd(crc32c) that no one would really use; in fips_enabled mode unprivileged users can use them to panic the kernel, and also they prevent treating a crypto self-test failure as a bug when fuzzing the kernel.) Fixes: 8e3ee85e ("crypto: crc32c - Test descriptor context format") Cc: stable@vger.kernel.org Signed-off-by:
-
