Refactor ACP child platform device creation code based on acp config.
Use common SoundWire manager functions for device probe and exit
sequences.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240214104014.1144668-2-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactor acp device configuration read logic and use common function
to scan SoundWire devices.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240214104014.1144668-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Constify pointer to of_phandle_args in few function arguments, for code
safety and self-documenting code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240216145448.224185-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The type 'tristate' is already specified three lines above.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://msgid.link/r/20240215132854.1907630-1-masahiroy@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Smatch complains about "head->full_size - head->header_size" can
underflow.  To some extent, we're always going to have to trust the
firmware a bit.  However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.

Fixes: d2458baa ("ASoC: SOF: ipc3-loader: Implement firmware parsing and loading")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/r/5593d147-058c-4de3-a6f5-540ecb96f6f8@moroto.mountainSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Jerome Brunet <jbrunet@baylibre.com>:

This patchset fixes 2 -Wcast-function-type-strict warning in amlogic
audio drivers with clang 16.

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

For both ChainDMA and DSPless mode the requirement is that the link must
be serviced by HD-DMA.
On pre Lunar Lake platforms this was only valid for HDAudio links but with
Lunar Lake all link types now serviced by HD-DMA.

This allows us to enable ChainDMA and DSPless mode for SoundWire links as
well.

clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:

sound/soc/meson/t9015.c:274:4: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  274 |                         (void(*)(void *))clk_disable_unprepare,

The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.

Fixes: 33901f5b ("ASoC: meson: add t9015 internal DAC driver")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-3-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:

sound/soc/meson/aiu.c:243:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  243 |                                        (void(*)(void *))clk_disable_unprepare,

The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.

Fixes: 6ae9ca9c ("ASoC: meson: aiu: add i2s and spdif support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-2-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

When updating all bits in AMIC control registers (mask 0xff), use more
obvious snd_soc_component_write().  Replace also hard-coded value 0x00
with a define.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240202154134.66967-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Just like DMIC, the AMIC control registers are volatile.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240202154134.66967-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Downstream driver configures DMIC clock rate through the divider
register but only parts of this code ended up in the upstream driver: we
always write the same value 0, so DIV2.  Same default value is used also
for the AMIC rate control.

Let's make it obvious and drop unneeded parts of the code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240202154134.66967-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

New versions of VA Macro has soundwire integrated, so handle the soundwire npl
clock correctly in the codec driver.

Introduce has_npl_clk and handle the sm8550 case separately because
it has soundwire integrated but doesn't have an npl clock.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240203-topic-sm8x50-upstream-va-macro-npl-v2-1-f2db82ae3359@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Set ipc4_copier->data.gtw_cfg.config_length dynamically based on
blob->alh_cfg.device_count to align with the other OS.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213123007.29956-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the i.MX ASRC DT binding to YAML.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240213010347.1075251-4-sre@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Likely a copy-paste error, wrong CONFIG used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213114354.32579-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

If the retain context is enabled we will unconditionally increment the
device's pm use count on each exception and when the drivers are unloaded
we do not correct this (as we don't know how many times we 'prevented
d3 entry').
Introduce a flag to make sure that we do not increment the use count more
than once and on module unload decrement the use count if needed to
balance it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240213114729.7055-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

For SoundWire/ALH, we need to have a dai configured, but we don't want
to send a DMA_TLV to firmware. Add additional code branches.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-16-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When DSPless mode is selected the DMIC/SSP offload status should not be
changed since the DSP is not in use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-15-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This mode is only supported starting with LunarLake (ACE_2_0).

DMIC and SSP remain supported with the DSP only for now, since they
need a DAI configuration that is provided to firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-14-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now that we have the dai_type we can remove any dependencies on
copiers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-13-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Starting with LunarLake, the dspless mode can handle SoundWire/ALH,
DMIC and SSPs, so we need to identify the dai type from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-12-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SoundWire integration is different from previous platforms, with
no dependencies on the DSP enablement. We can start the SoundWire
links in the probe instead of waiting for the post_fw_run stage.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-11-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

For dspless mode, we need to allocate and store an 'sdai'
structure. The existing code allocate the data on the stack and does
not set the widget->private pointer.

This minor change should not have any impact on existing DAIs, even
when the DSP is used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-10-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing code forces a parameter to be NULL but that parameter is
not used yet. Remove the special case in preparation for additional
changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-9-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now that we have a 'is_chain_dma_supported' callback we can use it to
double-check possible disconnects between a topology file enabling
chain-dma for a DAI and the hardware/firmware capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-8-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing code uses (stream_tag - 1) for the host and link dma id.

This is correct for playback, but for capture this results in an
invalid dma_type being used. The firmware assumes that the dma_id for
capture is always larger than DAI_NUM_HDA_OUT

This patch adds the offset for num_playback_streams, filled on Intel
platforms with the value extracted from the hardware capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-7-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The CHAIN_DMA IPC needs the number of playback streams as a start
offset for the dma_id of a capture stream.

This offset can be retrieved on Intel platforms from the GCAP
information, and stored in the sof_ipc4_fw_data structure.

One could argue that the fields added are not really dependent on any
firmware definitions but rather on hardware capabilities, but they are
required for the IPC CHAIN_DMA definitions so adding them in
ipc4_fw_data isn't completely silly.

The CHAIN_DMA IPC is currently only functional on Intel HDaudio DMAs,
and gated by the snd_sof_is_chain_dma_supported() helper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the existing callbacks and mix/match of HDaudio and SoundWire
support.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Reuse existing function to get the interface mask and expose it to the
SOF core with a callback - the main user is the IPC4 topology so only
HDaudio platforms provide this callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

IPC4 introduced a 'chain-dma' mode when host and link DMA are
connected by firmware without using a regular pipeline or the ability
to add intermediate connections. This mode is not available on all
platforms and all links, so add a platform-specific callback to help
the SOF ipc4-topology core handle different hardware+firmware
configurations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The chain_dma mode is currently only handled for HDaudio, but can be
used for orther DAIs starting with LunarLake. Move the chain_dma
handling earlier.

Error detection for the chain_dma case for older platforms is handled
at a different level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This chip seems to have an IRQ line, let us describe it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240210-topic-1v-v1-1-fda0db38e29b@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Sound card on Qualcomm X1E80100 CRD board has eight DAIs in one DAI
link (for WSA speakers).  Boards with older SoCs could technically have
similar setup, even if it was not observed on mainlined devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240212183800.243017-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch corrects a common misspelling of "request" as "reguest" found
in error log across multiple files within sound/soc/codecs.
Signed-off-by: Yinchuan Guo <guoych37@mail2.sysu.edu.cn>
Link: https://msgid.link/r/20240212144247.43744-1-guoych37@mail2.sysu.edu.cnSigned-off-by: Mark Brown <broonie@kernel.org>

We describe tplg_file_name and drv_name using snd_sof_of_mach
array and select correct machine description based on dts compatible
string.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240212125258.420265-1-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add functionality to read version of loaded FW from sysfs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240209085256.121261-1-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The acpi_subysystem_id is only written and freed, not read, so
unnecessary.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/454639336be28d2b50343e9c8366a56b0975e31d.1707456753.git.soyer@irl.huSigned-off-by: Mark Brown <broonie@kernel.org>

The soundwire links do not have their IDs as consecutive numbers, thus
the last link might have lower be_id than the previous one and this
leads to id collision with non SDW links.

For example,
create dai link SDW0-Playback-SimpleJack, id 0
create dai link SDW0-Capture-SmartMic, id 4
create dai link SDW0-Capture-SimpleJack, id 1
create dai link SDW2-Playback-SmartAmp, id 2
create dai link SDW2-Capture-SmartAmp, id 3
create dai link iDisp1, id 4
create dai link iDisp2, id 5
create dai link iDisp3, id 6
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-25-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds match table for rt722 multiple
function codec on link 0.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-24-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>