- 14 Apr, 2014 15 commits
-
-
Eric Dumazet authored
[ Upstream commit 2d8d40af ] Resizing fq hash table allocates memory while holding qdisc spinlock, with BH disabled. This is definitely not good, as allocation might sleep. We can drop the lock and get it when needed, we hold RTNL so no other changes can happen at the same time. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Chan authored
[ Upstream commit a8d9bc2e ] The pci shutdown handler added in: bnx2: Add pci shutdown handler commit 25bfb1dd created a shutdown down sequence without chip reset if the device was never brought up. This can cause the firmware to shutdown the PHY prematurely and cause MMIO read cycles to be unresponsive. On some systems, it may generate NMI in the bnx2's pci shutdown handler. The fix is to tell the firmware not to shutdown the PHY if there was no prior chip reset. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit c88507fb ] DST_NOCOUNT should only be used if an authorized user adds routes locally. In case of routes which are added on behalf of router advertisments this flag must not get used as it allows an unlimited number of routes getting added remotely. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Anton Nayshtut authored
[ Upstream commit d2d273ff ] Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds). This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS header. The issue detected and the fix verified by running MS HCK Offload LSO test on top of QEMU Windows guests, as this test sends IPv6 packets with IPPROTO_DSTOPTS. Signed-off-by:
Anton Nayshtut <anton@swortex.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit de144391 ] Some applications didn't expect recvmsg() on a non blocking socket could return -EINTR. This possibility was added as a side effect of commit b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines"). To hit this bug, you need to be a bit unlucky, as the u->readlock mutex is usually held for very small periods. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Signed-off-by:
-
Florian Westphal authored
[ Upstream commit e588e2f2 ] Quoting Alexander Aring: While fragmentation and unloading of 6lowpan module I got this kernel Oops after few seconds: BUG: unable to handle kernel paging request at f88bbc30 [..] Modules linked in: ipv6 [last unloaded: 6lowpan] Call Trace: [<c012af4c>] ? call_timer_fn+0x54/0xb3 [<c012aef8>] ? process_timeout+0xa/0xa [<c012b66b>] run_timer_softirq+0x140/0x15f Problem is that incomplete frags are still around after unload; when their frag expire timer fires, we get crash. When a netns is removed (also done when unloading module), inet_frag calls the evictor with 'force' argument to purge remaining frags. The evictor loop terminates when accounted memory ('work') drops to 0 or the lru-list becomes empty. However, the mem accounting is done via percpu counters and may not be accurate, i.e. loop may terminate prematurely. Alter evictor to only stop once the lru list is empty when force is requested. Reported-by:
Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Reported-by:
Alexander Aring <alex.aring@gmail.com> Tested-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
Erik Hugne authored
[ Upstream commit 2892505e ] Failure to schedule a TIPC tasklet with tipc_k_signal because the tasklet handler is disabled is not an error. It means TIPC is currently in the process of shutting down. We remove the error logging in this case. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Erik Hugne authored
[ Upstream commit 1bb8dce5 ] When the TIPC module is removed, the tasklet handler is disabled before all other subsystems. This will cause lingering publications in the name table because the node_down tasklets responsible to clean up publications from an unreachable node will never run. When the name table is shut down, these publications are detected and an error message is logged: tipc: nametbl_stop(): orphaned hash chain detected This is actually a memory leak, introduced with commit 993b858e ("tipc: correct the order of stopping services at rmmod") Instead of just logging an error and leaking memory, we free the orphaned entries during nametable shutdown. Signed-off-by:
-
Erik Hugne authored
[ Upstream commit edcc0511 ] When a topology server subscriber is disconnected, the associated connection id is set to zero. A check vs zero is then done in the subscription timeout function to see if the subscriber have been shut down. This is unnecessary, because all subscription timers will be cancelled when a subscriber terminates. Setting the connection id to zero is actually harmful because id zero is the identity of the topology server listening socket, and can cause a race that leads to this socket being closed instead. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
-
Ying Xue authored
[ Upstream commit 4652edb7 ] When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a connection instance, its reference count value is increased if it's found. But subsequently if it's found that the connection is closed, the work of sending message is not queued into its server send workqueue, and the connection reference count is not decreased. This will cause a reference count leak. To reproduce this problem, an application would need to open and closes topology server connections with high intensity. We fix this by immediately decrementing the connection reference count if a send fails due to the connection being closed. Signed-off-by:
-
Ying Xue authored
[ Upstream commit 6d4ebeb4 ] Currently connection shutdown callback function is called when connection instance is released in tipc_conn_kref_release(), and receiving packets and sending packets are running in different threads. Even if connection is closed by the thread of receiving packets, its shutdown callback may not be called immediately as the connection reference count is non-zero at that moment. So, although the connection is shut down by the thread of receiving packets, the thread of sending packets doesn't know it. Before its shutdown callback is invoked to tell the sending thread its connection has been closed, the sending thread may deliver messages by tipc_conn_sendmsg(), this is why the following error information appears: "Sending subscription event failed, no memory" To eliminate it, allow connection shutdown callback function to be called before connection id is removed in tipc_close_conn(), which makes the sending thread know the truth in time that its socket is closed so that it doesn't send message to it. We also remove the "Sending XXX failed..." error reporting for topology and config services. Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 6565b9ee ] MLD queries are supposed to have an IPv6 link-local source address according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch adds a sanity check to ignore such broken MLD queries. Without this check, such malformed MLD queries can result in a denial of service: The queries are ignored by any MLD listener therefore they will not respond with an MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Reviewed-by:
-
Daniel Borkmann authored
[ Upstream commit c485658b ] While working on ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable"), we noticed that there's a skb memory leakage in the error path. Running the same reproducer as in ec0223ec and by unconditionally jumping to the error label (to simulate an error condition) in sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about the unfreed chunk->auth_chunk skb clone: Unreferenced object 0xffff8800b8f3a000 (size 256): comm "softirq", pid 0, jiffies 4294769856 (age 110.757s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X......... backtrace: [<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210 [<ffffffff81566929>] skb_clone+0x49/0xb0 [<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp] [<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp] [<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp] [<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210 [<ffffffff815a64af>] nf_reinject+0xbf/0x180 [<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue] [<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink] [<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0 [<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink] [<ffffffff815a2bd8>] netlink_unicast+0x168/0x250 [<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0 [<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0 [<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380 What happens is that commit bbd0d598 clones the skb containing the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case that an endpoint requires COOKIE-ECHO chunks to be authenticated: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- ------------------ AUTH; COOKIE-ECHO ----------------> <-------------------- COOKIE-ACK --------------------- When we enter sctp_sf_do_5_1D_ce() and before we actually get to the point where we process (and subsequently free) a non-NULL chunk->auth_chunk, we could hit the "goto nomem_init" path from an error condition and thus leave the cloned skb around w/o freeing it. The fix is to centrally free such clones in sctp_chunk_destroy() handler that is invoked from sctp_chunk_free() after all refs have dropped; and also move both kfree_skb(chunk->auth_chunk) there, so that chunk->auth_chunk is either NULL (since sctp_chunkify() allocs new chunks through kmem_cache_zalloc()) or non-NULL with a valid skb pointer. chunk->skb and chunk->auth_chunk are the only skbs in the sctp_chunk structure that need to be handeled. While at it, we should use consume_skb() for both. It is the same as dev_kfree_skb() but more appropriately named as we are not a device but a protocol. Also, this effectively replaces the kfree_skb() from both invocations into consume_skb(). Functions are the same only that kfree_skb() assumes that the frame was being dropped after a failure (e.g. for tools like drop monitor), usage of consume_skb() seems more appropriate in function sctp_chunk_destroy() though. Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <yasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 24b9bf43 ] I stumbled upon this very serious bug while hunting for another one, it's a very subtle race condition between inet_frag_evictor, inet_frag_intern and the IPv4/6 frag_queue and expire functions (basically the users of inet_frag_kill/inet_frag_put). What happens is that after a fragment has been added to the hash chain but before it's been added to the lru_list (inet_frag_lru_add) in inet_frag_intern, it may get deleted (either by an expired timer if the system load is high or the timer sufficiently low, or by the fraq_queue function for different reasons) before it's added to the lru_list, then after it gets added it's a matter of time for the evictor to get to a piece of memory which has been freed leading to a number of different bugs depending on what's left there. I've been able to trigger this on both IPv4 and IPv6 (which is normal as the frag code is the same), but it's been much more difficult to trigger on IPv4 due to the protocol differences about how fragments are treated. The setup I used to reproduce this is: 2 machines with 4 x 10G bonded in a RR bond, so the same flow can be seen on multiple cards at the same time. Then I used multiple instances of ping/ping6 to generate fragmented packets and flood the machines with them while running other processes to load the attacked machine. *It is very important to have the _same flow_ coming in on multiple CPUs concurrently. Usually the attacked machine would die in less than 30 minutes, if configured properly to have many evictor calls and timeouts it could happen in 10 minutes or so. An important point to make is that any caller (frag_queue or timer) of inet_frag_kill will remove both the timer refcount and the original/guarding refcount thus removing everything that's keeping the frag from being freed at the next inet_frag_put. All of this could happen before the frag was ever added to the LRU list, then it gets added and the evictor uses a freed fragment. An example for IPv6 would be if a fragment is being added and is at the stage of being inserted in the hash after the hash lock is released, but before inet_frag_lru_add executes (or is able to obtain the lru lock) another overlapping fragment for the same flow arrives at a different CPU which finds it in the hash, but since it's overlapping it drops it invoking inet_frag_kill and thus removing all guarding refcounts, and afterwards freeing it by invoking inet_frag_put which removes the last refcount added previously by inet_frag_find, then inet_frag_lru_add gets executed by inet_frag_intern and we have a freed fragment in the lru_list. The fix is simple, just move the lru_add under the hash chain locked region so when a removing function is called it'll have to wait for the fragment to be added to the lru_list, and then it'll remove it (it works because the hash chain removal is done before the lru_list one and there's no window between the two list adds when the frag can get dropped). With this fix applied I couldn't kill the same machine in 24 hours with the same setup. Fixes: 3ef0eb0d ("net: frag, move LRU list maintenance outside of rwlock") CC: Florian Westphal <fw@strlen.de> CC: Jesper Dangaard Brouer <brouer@redhat.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Paul Moore authored
commit f64410ec upstream. This patch is based on an earlier patch by Eric Paris, he describes the problem below: "If an inode is accessed before policy load it will get placed on a list of inodes to be initialized after policy load. After policy load we call inode_doinit() which calls inode_doinit_with_dentry() on all inodes accessed before policy load. In the case of inodes in procfs that means we'll end up at the bottom where it does: /* Default to the fs superblock SID. */ isec->sid = sbsec->sid; if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) { if (opt_dentry) { isec->sclass = inode_mode_to_security_class(...) rc = selinux_proc_get_sid(opt_dentry, isec->sclass, &sid); if (rc) goto out_unlock; isec->sid = sid; } } Since opt_dentry is null, we'll never call selinux_proc_get_sid() and will leave the inode labeled with the label on the superblock. I believe a fix would be to mimic the behavior of xattrs. Look for an alias of the inode. If it can't be found, just leave the inode uninitialized (and pick it up later) if it can be found, we should be able to call selinux_proc_get_sid() ..." On a system exhibiting this problem, you will notice a lot of files in /proc with the generic "proc_t" type (at least the ones that were accessed early in the boot), for example: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax However, with this patch in place we see the expected result: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Acked-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
- 03 Apr, 2014 23 commits
-
-
Greg Kroah-Hartman authored
-
Daniel Borkmann authored
commit b22f5126 upstream. Some occurences in the netfilter tree use skb_header_pointer() in the following way ... struct dccp_hdr _dh, *dh; ... skb_header_pointer(skb, dataoff, sizeof(_dh), &dh); ... where dh itself is a pointer that is being passed as the copy buffer. Instead, we need to use &_dh as the forth argument so that we're copying the data into an actual buffer that sits on the stack. Currently, we probably could overwrite memory on the stack (e.g. with a possibly mal-formed DCCP packet), but unintentionally, as we only want the buffer to be placed into _dh variable. Fixes: 2bc78049 ("[NETFILTER]: nf_conntrack: add DCCP protocol support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Li Zefan authored
commit 0ab02ca8 upstream. Setup cgroupfs like this: # mount -t cgroup -o cpuacct xxx /cgroup # mkdir /cgroup/sub1 # mkdir /cgroup/sub2 Then run these two commands: # for ((; ;)) { mkdir /cgroup/sub1/tmp && rmdir /mnt/sub1/tmp; } & # for ((; ;)) { mkdir /cgroup/sub2/tmp && rmdir /mnt/sub2/tmp; } & After seconds you may see this warning: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 25243 at lib/idr.c:527 sub_remove+0x87/0x1b0() idr_remove called for id=6 which is not allocated. ... Call Trace: [<ffffffff8156063c>] dump_stack+0x7a/0x96 [<ffffffff810591ac>] warn_slowpath_common+0x8c/0xc0 [<ffffffff81059296>] warn_slowpath_fmt+0x46/0x50 [<ffffffff81300aa7>] sub_remove+0x87/0x1b0 [<ffffffff810f3f02>] ? css_killed_work_fn+0x32/0x1b0 [<ffffffff81300bf5>] idr_remove+0x25/0xd0 [<ffffffff810f2bab>] cgroup_destroy_css_killed+0x5b/0xc0 [<ffffffff810f4000>] css_killed_work_fn+0x130/0x1b0 [<ffffffff8107cdbc>] process_one_work+0x26c/0x550 [<ffffffff8107eefe>] worker_thread+0x12e/0x3b0 [<ffffffff81085f96>] kthread+0xe6/0xf0 [<ffffffff81570bac>] ret_from_fork+0x7c/0xb0 ---[ end trace 2d1577ec10cf80d0 ]--- It's because allocating/removing cgroup ID is not properly synchronized. The bug was introduced when we converted cgroup_ida to cgroup_idr. While synchronization is already done inside ida_simple_{get,remove}(), users are responsible for concurrent calls to idr_{alloc,remove}(). tj: Refreshed on top of b58c8998 ("cgroup: fix error return from cgroup_create()"). [mhocko@suse.cz: ported to 3.12] Fixes: 4e96ee8e ("cgroup: convert cgroup_ida to cgroup_idr") Cc: <stable@vger.kernel.org> #3.12+ Reported-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
David Rientjes authored
commit 668f9abb upstream. Commit bf6bddf1 ("mm: introduce compaction and migration for ballooned pages") introduces page_count(page) into memory compaction which dereferences page->first_page if PageTail(page). This results in a very rare NULL pointer dereference on the aforementioned page_count(page). Indeed, anything that does compound_head(), including page_count() is susceptible to racing with prep_compound_page() and seeing a NULL or dangling page->first_page pointer. This patch uses Andrea's implementation of compound_trans_head() that deals with such a race and makes it the default compound_head() implementation. This includes a read memory barrier that ensures that if PageTail(head) is true that we return a head page that is neither NULL nor dangling. The patch then adds a store memory barrier to prep_compound_page() to ensure page->first_page is set. This is the safest way to ensure we see the head page that we are expecting, PageTail(page) is already in the unlikely() path and the memory barriers are unfortunately required. Hugetlbfs is the exception, we don't enforce a store memory barrier during init since no race is possible. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Holger Kiehl <Holger.Kiehl@dwd.de> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit 38129a13 upstream. fixes RCU bug - walking through hlist is safe in face of element moves, since it's self-terminating. Cyclic lists are not - if we end up jumping to another hash chain, we'll loop infinitely without ever hitting the original list head. [fix for dumb braino folded] Spotted by: Max Kellermann <mk@cm4all.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 0b1b901b upstream. If the dest_mnt is not shared, propagate_mnt() does nothing - there's no mounts to propagate to and thus no copies to create. Might as well don't bother calling it in that case. Signed-off-by:
-
Al Viro authored
commit 1d6a32ac upstream. preparation to switching mnt_hash to hlist Signed-off-by:
-
Al Viro authored
commit 0818bf27 upstream. * switch allocation to alloc_large_system_hash() * make sizes overridable by boot parameters (mhash_entries=, mphash_entries=) * switch mountpoint_hashtable from list_head to hlist_head Signed-off-by:
-
Sasha Levin authored
commit 05efa8c9 upstream. Commit 4af712e8 ("random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized") has added a late reseed stage that happens as soon as the nonblocking pool is marked as initialized. This fails in the case that the nonblocking pool gets initialized during __prandom_reseed()'s call to get_random_bytes(). In that case we'd double back into __prandom_reseed() in an attempt to do a late reseed - deadlocking on 'lock' early on in the boot process. Instead, just avoid even waiting to do a reseed if a reseed is already occuring. Fixes: 4af712e8 ("random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Acked-by:
-
Thomas Petazzoni authored
commit e3a8786c upstream. Commit 5445eaf3 ('mvneta: Try to fix mvneta when compiled as module') fixed the mvneta driver to make it work properly when loaded as a module in SGMII configuration, which was tested successful by the author on the Armada XP OpenBlocks AX3, which uses SGMII. However, it turns out that the Armada XP GP, which uses RGMII, is affected by a similar problem: its SERDES configuration is lost when mvneta is loaded as a module, because this configuration is set by the bootloader, and then lost because the clock is gated by the clock framework until the mvneta driver is loaded again and the clock is re-enabled. However, it turns out that for the RGMII case, setting the SERDES configuration is not sufficient: the PCS enable bit in the MVNETA_GMAC_CTRL_2 register must also be set, like in the SGMII configuration. Therefore, this commit reworks the SGMII/RGMII initialization: the only difference between the two now is a different SERDES configuration, all the rest is identical. In detail, to achieve this, the commit: * Renames MVNETA_SGMII_SERDES_CFG to MVNETA_SERDES_CFG because it is not specific to SGMII, but also used on RGMII configurations. * Adds a MVNETA_RGMII_SERDES_PROTO definition, that must be used as the MVNETA_SERDES_CFG value in RGMII configurations. * Removes the mvneta_gmac_rgmii_set() and mvneta_port_sgmii_config() functions, and instead directly do the SGMII/RGMII configuration in mvneta_port_up(), from where those functions where called. It is worth mentioning that mvneta_gmac_rgmii_set() had an 'enable' parameter that was always passed as '1', so it was pretty useless. * Reworks the mvneta_port_up() function to set the MVNETA_SERDES_CFG register to the appropriate value depending on the RGMII vs. SGMII configuration. It also unconditionally set the PCS_ENABLE bit (was already done for SGMII, but is now also needed for RGMII), and sets the PORT_RGMII bit (which was already done for both SGMII and RGMII). This commit was successfully tested with mvneta compiled as a module, on both the OpenBlocks AX3 (SGMII configuration) and the Armada XP GP (RGMII configuration). Reported-by:
Steve McIntyre <steve@einval.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Thomas Petazzoni authored
commit a79121d3 upstream. Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS, not the PSC: there was a typo in the name of the define, which this commit fixes. Signed-off-by:
-
Al Viro authored
commit e825196d upstream. In all callchains leading to prepend_name(), the value left in *buflen is eventually discarded unused if prepend_name() has returned a negative. So we are free to do what prepend() does, and subtract from *buflen *before* checking for underflow (which turns into checking the sign of subtraction result, of course). Signed-off-by:
-
Artem Fetishev authored
commit 825600c0 upstream. On x86 uniprocessor systems topology_physical_package_id() returns -1 which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized which leads to GPF in rapl_pmu_init(). See arch/x86/kernel/cpu/perf_event_intel_rapl.c. It turns out that physical_package_id and core_id can actually be retreived for uniprocessor systems too. Enabling them also fixes rapl_pmu code. Signed-off-by:
Artem Fetishev <artem_fetishev@epam.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Daniel Vetter authored
commit 8ee661b5 upstream. It apparently blows up on some machines. This functionally reverts commit 828c7908 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Wed Oct 16 09:21:30 2013 -0700 drm/i915: Disable GGTT PTEs on GEN6+ suspend Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841Reported-and-Tested-by:
Brad Jackson <bjackson0971@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Todd Previte <tprevite@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Scott Wood authored
commit 5f12c5ec upstream. Fixes a build break due to the undeclared use of irq_of_parse_and_map() and of_iomap(). This build break was apparently introduced while the driver was unbuildable due to the bug fixed by 62c19c9d ("i2c: Remove usage of orphaned symbol OF_I2C"). When 62c19c was added in v3.14-rc7, the driver was enabled again, breaking the powerpc mpc85xx_defconfig and mpc85xx_smp_defconfig. 62c19c is marked for stable, so this should go there as well. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
David Vrabel authored
commit 5926f87f upstream. This reverts commit a9c8e4be. PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT is set and pseudo-physical addresses is _PAGE_PRESENT is clear. This is because during a domain save/restore (migration) the page table entries are "canonicalised" and uncanonicalised". i.e., MFNs are converted to PFNs during domain save so that on a restore the page table entries may be rewritten with the new MFNs on the destination. This canonicalisation is only done for PTEs that are present. This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or _PAGE_NUMA) was set but _PAGE_PRESENT was clear. These PTEs would be migrated as-is which would result in unexpected behaviour in the destination domain. Either a) the MFN would be translated to the wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE because the MFN is no longer owned by the domain; or c) the present bit would not get set. Symptoms include "Bad page" reports when munmapping after migrating a domain. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Wei Liu authored
commit 09ed3d5b upstream. Xen balloon driver will update ballooned out pages' P2M entries to point to scratch page for PV guests. In 24f69373 ("xen/balloon: don't alloc page while non-preemptible", kmap_flush_unused was moved after updating P2M table. In that case for 32 bit PV guest we might end up with P2M X -----> S (S is mfn of balloon scratch page) M2P Y -----> X (Y is mfn in persistent kmap entry) kmap_flush_unused() iterates through all the PTEs in the kmap address space, using pte_to_page() to obtain the page. If the p2m and the m2p are inconsistent the incorrect page is returned. This will clear page->address on the wrong page which may cause subsequent oopses if that page is currently kmap'ed. Move the flush back between get_page and __set_phys_to_machine to fix this. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Hans de Goede authored
commit 6797b39e upstream. The cypress PS/2 trackpad models supported by the cypress_ps2 driver emulate BTN_RIGHT events in firmware based on the finger position, as part of this no motion events are sent when the finger is in the button area. The INPUT_PROP_BUTTONPAD property is there to indicate to userspace that BTN_RIGHT events should be emulated in userspace, which is not necessary in this case. When INPUT_PROP_BUTTONPAD is advertised userspace will wait for a motion event before propagating the button event higher up the stack, as it needs current abs x + y data for its BTN_RIGHT emulation. Since in the cypress_ps2 pads don't report motion events in the button area, this means that clicks in the button area end up being ignored, so INPUT_PROP_BUTTONPAD actually causes problems for these touchpads, and removing it fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76341Reported-by:
Adam Williamson <awilliam@redhat.com> Tested-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 8a0435d9 upstream. This extends Benjamin Tissoires manual min/max quirk table with support for the ThinkPad X240. Signed-off-by:
-
Benjamin Tissoires authored
commit 421e08c4 upstream. The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad. However, these new Synaptics devices report bad axis ranges. Under Windows, it is not a problem because the Windows driver uses RMI4 over SMBus to talk to the device. Under Linux, we are using the PS/2 fallback interface and it occurs the reported ranges are wrong. Of course, it would be too easy to have only one range for the whole series, each touchpad seems to be calibrated in a different way. We can not use SMBus to get the actual range because I suspect the firmware will switch into the SMBus mode and stop talking through PS/2 (this is the case for hybrid HID over I2C / PS/2 Synaptics touchpads). So as a temporary solution (until RMI4 land into upstream), start a new list of quirks with the min/max manually set. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Dmitry Torokhov authored
commit e4dbedc7 upstream. We should not be using static variable mousedev_mix in methods that can be called before that singleton gets assigned. While at it let's add open and close methods to mousedev structure so that we do not need to test if we are dealing with multiplexor or normal device and simply call appropriate method directly. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551Reported-by:
GiulioDP <depasquale.giulio@gmail.com> Tested-by:
-
Al Viro authored
commit b37199e6 upstream. We can get false negative from __lookup_mnt() if an unrelated vfsmount gets moved. In that case legitimize_mnt() is guaranteed to fail, and we will fall back to non-RCU walk... unless we end up running into a hard error on a filesystem object we wouldn't have reached if not for that false negative. IOW, delaying that check until the end of pathname resolution is wrong - we should recheck right after we attempt to cross the mountpoint. We don't need to recheck unless we see d_mountpoint() being true - in that case even if we have just raced with mount/umount, we can simply go on as if we'd come at the moment when the sucker wasn't a mountpoint; if we run into a hard error as the result, it was a legitimate outcome. __lookup_mnt() returning NULL is different in that respect, since it might've happened due to operation on completely unrelated mountpoint. Signed-off-by:
-
Theodore Ts'o authored
commit 00a1a053 upstream. Use cmpxchg() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race where an immutable file has the immutable flag cleared for a brief window of time. Reported-by:
John Sullivan <jsrhbz@kanargh.force9.co.uk> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
- 31 Mar, 2014 2 commits
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit f2be82b0 upstream. The check that makes sure that we have enough memory allocated to read in the entire header of the message in question is currently busted. It compares front_len of the incoming message with iov_len field of ceph_msg::front structure, which is used primarily to indicate the amount of data already read in, and not the size of the allocated buffer. Under certain conditions (e.g. a short read from a socket followed by that socket's shutdown and owning ceph_connection reset) this results in a warning similar to [85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0) and, through another bug, leads to forever hung tasks and forced reboots. Fix this by comparing front_len with front_alloc_len field of struct ceph_msg, which stores the actual size of the buffer. Fixes: http://tracker.ceph.com/issues/5425Signed-off-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by:
Sage Weil <sage@inktank.com> Signed-off-by:
-
