- 09 Sep, 2021 2 commits
-
-
Suravee Suthikulpanit authored
Since the function has been simplified and only call iommu_init_ga_log(), remove the function and replace with iommu_init_ga_log() instead. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20210820202957.187572-4-suravee.suthikulpanit@amd.com Fixes: 8bda0cfb ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Wei Huang authored
Currently, iommu_init_ga() checks and disables IOMMU VAPIC support (i.e. AMD AVIC support in IOMMU) when GAMSup feature bit is not set. However it forgets to clear IRQ_POSTING_CAP from the previously set amd_iommu_irq_ops.capability. This triggers an invalid page fault bug during guest VM warm reboot if AVIC is enabled since the irq_remapping_cap(IRQ_POSTING_CAP) is incorrectly set, and crash the system with the following kernel trace. BUG: unable to handle page fault for address: 0000000000400dd8 RIP: 0010:amd_iommu_deactivate_guest_mode+0x19/0xbc Call Trace: svm_set_pi_irte_mode+0x8a/0xc0 [kvm_amd] ? kvm_make_all_cpus_request_except+0x50/0x70 [kvm] kvm_request_apicv_update+0x10c/0x150 [kvm] svm_toggle_avic_for_irq_window+0x52/0x90 [kvm_amd] svm_enable_irq_window+0x26/0xa0 [kvm_amd] vcpu_enter_guest+0xbbe/0x1560 [kvm] ? avic_vcpu_load+0xd5/0x120 [kvm_amd] ? kvm_arch_vcpu_load+0x76/0x240 [kvm] ? svm_get_segment_base+0xa/0x10 [kvm_amd] kvm_arch_vcpu_ioctl_run+0x103/0x590 [kvm] kvm_vcpu_ioctl+0x22a/0x5d0 [kvm] __x64_sys_ioctl+0x84/0xc0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes by moving the initializing of AMD IOMMU interrupt remapping mode (amd_iommu_guest_ir) earlier before setting up the amd_iommu_irq_ops.capability with appropriate IRQ_POSTING_CAP flag. [joro: Squashed the two patches and limited check_features_on_all_iommus() to CONFIG_IRQ_REMAP to fix a compile warning.] Signed-off-by:Wei Huang <wei.huang2@amd.com> Co-developed-by:
-
- 20 Aug, 2021 3 commits
-
-
Joerg Roedel authored
-
Robin Murphy authored
Previously io-pgtable merely passed the iommu_iotlb_gather pointer through to helpers, but now it has grown its own direct dereference. This turns out to break the build for !IOMMU_API configs where the structure only has a dummy definition. It will probably also crash drivers who don't use the gather mechanism and simply pass in NULL. Wrap this dereference in a suitable helper which can both be stubbed out for !IOMMU_API and encapsulate a NULL check otherwise. Fixes: 7a7c5bad ("iommu: Indicate queued flushes via gather data") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/83672ee76f6405c82845a55c148fa836f56fbbc1.1629465282.git.robin.murphy@arm.comSigned-off-by:
-
Yang Yingliang authored
Add the missing unlock before return from function arm_smmu_device_group() in the error handling case. Fixes: b1a13479 ("iommu/arm-smmu: Fix race condition during iommu_group creation") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210820074949.1946576-1-yangyingliang@huawei.comSigned-off-by:
-
- 19 Aug, 2021 9 commits
-
-
Liu Yi L authored
The helper functions should not modify the pasid entries which are still in use. Add a check against present bit. Signed-off-by:
Liu Yi L <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20210817042425.1784279-1-yi.l.liu@intel.comSigned-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210818134852.1847070-10-baolu.lu@linux.intel.comSigned-off-by:
-
Liu Yi L authored
Use the pasid_pte_is_present() helper for present bit check in the intel_pasid_tear_down_entry(). Signed-off-by:
-
Andy Shevchenko authored
Kernel doc validator is unhappy with the following .../perf.c:16: warning: Function parameter or member 'latency_lock' not described in 'DEFINE_SPINLOCK' .../perf.c:16: warning: expecting prototype for perf.c(). Prototype was for DEFINE_SPINLOCK() instead Drop kernel doc annotation since the top comment is not in the required format. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210729163538.40101-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Lu Baolu authored
The minimum per-IOMMU PRQ queue size is one 4K page, this is more entries than the hardcoded limit of 32 in the current VT-d code. Some devices can support up to 512 outstanding PRQs but underutilized by this limit of 32. Although, 32 gives some rough fairness when multiple devices share the same IOMMU PRQ queue, but far from optimal for customized use case. This extends the per-IOMMU PRQ queue size to four 4K pages and let the devices have as many outstanding page requests as they can. Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
We preset the access and dirty bits for IOVA over first level usage only for the kernel DMA (i.e., when domain type is IOMMU_DOMAIN_DMA). We should also preset the FL A/D for user space DMA usage. The idea is that even the user space A/D bit memory write is unnecessary. We should avoid it to minimize the overhead. Suggested-by:
Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by:
-
Lu Baolu authored
The commit 8950dcd8 ("iommu/vt-d: Leave scalable mode default off") leaves the scalable mode default off and end users could turn it on with "intel_iommu=sm_on". Using the Intel IOMMU scalable mode for kernel DMA, user-level device access and Shared Virtual Address have been enabled. This enables the scalable mode by default if the hardware advertises the support and adds kernel options of "intel_iommu=sm_on/sm_off" for end users to configure it through the kernel parameters. Suggested-by:
Ashok Raj <ashok.raj@intel.com> Suggested-by:
-
Lu Baolu authored
Put all sub-options inside a "if INTEL_IOMMU" so that they don't need to always depend on INTEL_IOMMU. Use IS_ENABLED() instead of #ifdef as well. Signed-off-by:
-
Zhen Lei authored
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210609124937.14260-1-thunder.leizhen@huawei.comSigned-off-by:
-
Lu Baolu authored
The VT-d spec Revision 3.3 updated the virtual command registers, virtual command opcode B register, virtual command response register and virtual command capability register (Section 10.4.43, 10.4.44, 10.4.45, 10.4.46). This updates the virtual command interface implementation in the Intel IOMMU driver accordingly. Fixes: 24f27d32 ("iommu/vt-d: Enlightened PASID allocation") Signed-off-by:
-
- 18 Aug, 2021 26 commits
-
-
Joerg Roedel authored
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu Arm SMMU updates for 5.15 - SMMUv3 * Minor optimisation to avoid zeroing struct members on CMD submission * Increased use of batched commands to reduce submission latency * Refactoring in preparation for ECMDQ support - SMMUv2 * Fix races when probing devices with identical StreamIDs * Optimise walk cache flushing for Qualcomm implementations * Allow deep sleep states for some Qualcomm SoCs with shared clocks
-
Robin Murphy authored
Allocating and enabling a flush queue is in fact something we can reasonably do while a DMA domain is active, without having to rebuild it from scratch. Thus we can allow a strict -> non-strict transition from sysfs without requiring to unbind the device's driver, which is of particular interest to users who want to make selective relaxations to critical devices like the one serving their root filesystem. Disabling and draining a queue also seems technically possible to achieve without rebuilding the whole domain, but would certainly be more involved. Furthermore there's not such a clear use-case for tightening up security *after* the device may already have done whatever it is that you don't trust it not to do, so we only consider the relaxation case. Signed-off-by:
-
Robin Murphy authored
To parallel the sysfs behaviour, merge the new build-time option for DMA domain strictness into the default domain type choice. Suggested-by:
Joerg Roedel <joro@8bytes.org> Reviewed-by:
Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Robin Murphy authored
When passthrough is enabled, the default strictness policy becomes irrelevant, since any subsequent runtime override to a DMA domain type now embodies an explicit choice of strictness as well. Save on noise by only logging the default policy when it is meaningfully in effect. Reviewed-by:
-
Robin Murphy authored
The sysfs interface for default domain types exists primarily so users can choose the performance/security tradeoff relevant to their own workload. As such, the choice between the policies for DMA domains fits perfectly as an additional point on that scale - downgrading a particular device from a strict default to non-strict may be enough to let it reach the desired level of performance, while still retaining more peace of mind than with a wide-open identity domain. Now that we've abstracted non-strict mode as a distinct type of DMA domain, allow it to be chosen through the user interface as well. Reviewed-by:
-
Robin Murphy authored
Eliminate the iommu_get_dma_strict() indirection and pipe the information through the domain type from the beginning. Besides the flow simplification this also has several nice side-effects: - Automatically implies strict mode for untrusted devices by virtue of their IOMMU_DOMAIN_DMA override. - Ensures that we only end up using flush queues for drivers which are aware of them and can actually benefit. - Allows us to handle flush queue init failure by falling back to strict mode instead of leaving it to possibly blow up later. Reviewed-by:
-
Robin Murphy authored
In preparation for the strict vs. non-strict decision for DMA domains to be expressed in the domain type, make sure we expose our flush queue awareness by accepting the new domain type, and test the specific feature flag where we want to identify DMA domains in general. The DMA ops reset/setup can simply be made unconditional, since iommu-dma already knows only to touch DMA domains. Reviewed-by:
-
Robin Murphy authored
In preparation for the strict vs. non-strict decision for DMA domains to be expressed in the domain type, make sure we expose our flush queue awareness by accepting the new domain type. Signed-off-by:
-
Robin Murphy authored
The DMA ops reset/setup can simply be unconditional, since iommu-dma already knows only to touch DMA domains. Signed-off-by:
-
Robin Murphy authored
Promote the difference between strict and non-strict DMA domains from an internal detail to a distinct domain feature and type, to pave the road for exposing it through the sysfs default domain interface. Reviewed-by:
-
Robin Murphy authored
IO_PGTABLE_QUIRK_NON_STRICT was never a very comfortable fit, since it's not a quirk of the pagetable format itself. Now that we have a more appropriate way to convey non-strict unmaps, though, this last of the non-quirk quirks can also go, and with the flush queue code also now enforcing its own ordering we can have a lovely cleanup all round. Signed-off-by:
-
Robin Murphy authored
Since iommu_iotlb_gather exists to help drivers optimise flushing for a given unmap request, it is also the logical place to indicate whether the unmap is strict or not, and thus help them further optimise for whether to expect a sync or a flush_all subsequently. As part of that, it also seems fair to make the flush queue code take responsibility for enforcing the really subtle ordering requirement it brings, so that we don't need to worry about forgetting that if new drivers want to add flush queue support, and can consolidate the existing versions. While we're adding to the kerneldoc, also fill in some info for @freelist which was overlooked previously. Signed-off-by:
-
Robin Murphy authored
iommu_dma_init_domain() is now only called from iommu_setup_dma_ops(), which has already assumed dev to be non-NULL. Reviewed-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Reviewed-by:
-
Robin Murphy authored
The core code bakes its own cookies now. CC: Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Acked-by:
Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Tested-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
-
Robin Murphy authored
The core code bakes its own cookies now. CC: Yong Wu <yong.wu@mediatek.com> Signed-off-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Reviewed-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Signed-off-by:
-
Robin Murphy authored
The core code bakes its own cookies now. Signed-off-by:
-
Robin Murphy authored
Now that everyone has converged on iommu-dma for IOMMU_DOMAIN_DMA support, we can abandon the notion of drivers being responsible for the cookie type, and consolidate all the management into the core code. CC: Yong Wu <yong.wu@mediatek.com> CC: Chunyan Zhang <chunyan.zhang@unisoc.com> CC: Maxime Ripard <mripard@kernel.org> Tested-by:
-
Liu Yi L authored
This fixes improper iotlb invalidation in intel_pasid_tear_down_entry(). When a PASID was used as nested mode, released and reused, the following error message will appear: [ 180.187556] Unexpected page request in Privilege Mode [ 180.187565] Unexpected page request in Privilege Mode [ 180.279933] Unexpected page request in Privilege Mode [ 180.279937] Unexpected page request in Privilege Mode Per chapter 6.5.3.3 of VT-d spec 3.3, when tear down a pasid entry, the software should use Domain selective IOTLB flush if the PGTT of the pasid entry is SL only or Nested, while for the pasid entries whose PGTT is FL only or PT using PASID-based IOTLB flush is enough. Fixes: 2cd1311a ("iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr") Signed-off-by:
Yi Sun <yi.y.sun@intel.com> Link: https://lore.kernel.org/r/20210817042425.1784279-1-yi.l.liu@intel.comSigned-off-by:
-
Fenghua Yu authored
A PASID reference is increased whenever a device is bound to an mm (and its PASID) successfully (i.e. the device's sdev user count is increased). But the reference is not dropped every time the device is unbound successfully from the mm (i.e. the device's sdev user count is decreased). The reference is dropped only once by calling intel_svm_free_pasid() when there isn't any device bound to the mm. intel_svm_free_pasid() drops the reference and only frees the PASID on zero reference. Fix the issue by dropping the PASID reference and freeing the PASID when no reference on successful unbinding the device by calling intel_svm_free_pasid() . Fixes: 40483774 ("iommu/vt-d: Use iommu_sva_alloc(free)_pasid() helpers") Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20210813181345.1870742-1-fenghua.yu@intel.comSigned-off-by:
-
