Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Add UAPI to get/set GEM objects' debug name.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Prep work to add a way to get/set the GEM objects debug name.
Signed-off-by: Rob Clark <robdclark@gmail.com>

To lower CPU  overhead, future userspace will be switching to pinning
iova and avoiding the use of relocs, and only include cmds table entries
for IB1 level cmdstream (but not IB2 or state-groups).

This leaves the kernel unsure what to dump for rd/hangrd cmdstream
dumping.  So add a MSM_SUBMIT_BO_DUMP flag so userspace can indicate
buffers that contain cmdstream (or are otherwise important to dump).
Signed-off-by: Rob Clark <robdclark@gmail.com>

When the userspace tries to read the crashstate dump, the read side
implementation in the driver currently ascii85 encodes all the binary
buffers and it does this each time the read system call is called.
A userspace tool like cat typically does a page by page read and the
number of read calls depends on the size of the data captured by the
driver. This is certainly not desirable and does not scale well with
large captures.

This patch encodes the buffer only once in the read path. With this there
is an immediate >10X speed improvement in crashstate save time.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

For reasons that I'm sure made perfect sense at the time we were
opting to defer the iova alloc / pin on the ringbuffer until HW
init time so when we moved to iova reference counting we ended
up adding a reference count every time the hardware started.
Not that it mattered (because the ring is always around) but
it did make the debug output look odd. Allocate and pin the iova
at create time instead.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

For debugging purposes it is useful to assign descriptions
to buffers so that we know what they are used for. Add
a field to the buffer object and use that to name the various
kernel side allocations which ends up looking like like this
in /d/dri/X/gem:

   flags       id ref  offset   kaddr            size     madv      name
   00040000: I  0 ( 1) 00000000 0000000070b79eca 00004096           memptrs
      vmas: [gpu: 01000000,mapped,inuse=1]
   00020000: I  0 ( 1) 00000000 0000000031ed4074 00032768           ring0
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add a reference count to track how many times a particular
chunk of iova memory is pinned (mapped) in the iomu and
add msm_gem_unpin_iova to give up references.

It is important to note that msm_gem_unpin_iova replaces
msm_gem_put_iova because the new implicit behavior
that an assigned iova in a given vma is now valid for the
life of the buffer and what we are really focusing on is
the use of that iova.

For now the unmappings are lazy; once the reference counts
go to zero they *COULD* be unmapped dynamically but that
will require an outside force such as a shrinker or
mm_notifiers.  For now, we're just focusing on getting
the counting right and setting ourselves up to be ready
for the future.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add a new function to get and pin the iova memory in one
step (basically renaming the old msm_gem_get_iova function)
and switch msm_gem_get_iova() to only allocate an iova but
not map it in the IOMMU. This is only currently used by
msm_ioctl_gem_info() since all other users of of the iova
expect that the memory be immediately available.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add headers for the 'gem' debugfs file to make it easier to remember
what all the values mean and move the list of virtual address regions
to the next line and add the name and map status to make it clearer
what we are looking at.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Split the operation of msm_gem_get_iova into two operations:
1) allocate an iova and 2) map (pin) the backing memory int the
iommu. This is the first step toward allowing memory pinning
to occur independently of the iova management.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The scatter gather table doesn't need to be passed in for the
MMU unmap function.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Buffer objects allocated with msm_gem_kernel_new() are mostly
freed the same way so we can save a few lines of code with a
common function.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The a6xx GPU state allocates a LOT of memory. Add a bit of
infrastructure to track the memory allocations in the GPU structure
and delete them when the state is destroyed much the same way
that devm works with the device model as a whole.  This protects
against the developer accidentally forgetting to add a kfree() to
an ever growing list.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add support for gathering and dumping the a6xx GPU state including
registers, GMU registers, indexed registers, shader blocks,
context clusters and debugbus.

v2: Fix bugs discovered by Sharat Masetty
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

If the GPU target doesn't define a list of registers then gracefully skip
capturing and/or printing them. This is used by more complex targets like
6xx that have other means of capturing register values.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The gpu_poll_timeout() function can be useful to multiple targets so
mvoe it into adreno_gpu.h from the a5xx code.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Instead of trying to store all the tagged buffers from a hanging
submit only store the command buffers that were not imported.
This cuts down on the amount of data stored in the GPU state to
the base minimum of useful information.

The downside is that this will make it more difficult to
successfully replay a hang with just the GPU state but there
isn't any reason why that functionality can't be added back
in later once we've figured out how to better communicate
such massive amounts of data.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add trace events to track the progress of a GPU submission
msm_gpu_submit occurs at the beginning of the submissions,
msm_gpu_submit_flush happens when the submission is put on
the ringbuffer and msm_submit_flush_retired is sent when
the operation is retired.

To make it easier to track the operations a unique sequence
number is assigned to each submission and displayed in each
event output so a human or a script can easily associate
the events related to a specific submission.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add infrastructure to track statistics for GPU submissions
by sampling certain perfcounters before and after a submission.

To store the statistics, the per-ring memptrs region is
expanded to include room for up to 64 entries - this should
cover a reasonable amount of inflight submissions without
worrying about losing data. The target specific code inserts
PM4 commands to sample the counters before and after
submission and store them in the data region. The CPU can
access the data after the submission retires to make sense
of the statistics and communicate them to the user.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

If any of the function calls in _msm_gem_kernel_new fail we need
to make sure to dereference the GEM object with the appropriate
function for the current locking state.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Allocate the correct buffer size for the GPU memptrs. The incorrect
size hasn't affected us thus far since the incorrect size was larger
than the intended size and we're still stuck on page sized
granularity anyway but technically correct is the best kind of
correct.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Specify geometry for DPU iommu domain which sets
the address space for gem allocations.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Suggested-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate
drm-formatted specific log messages so that it will be easy to
differentiate in case of multiple instances of driver.
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

They're not needed.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Local variable is not needed and condition can't be hit.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

I noticed an empty label while driving by and decided to use
coccinelle to see if there were any more. Here's the spatch and the
invocation:
---

@@
identifier lbl;
expression E;
@@

- goto lbl;
+ return E;
...
- lbl:
        return E;

@@
identifier lbl;
@@

- goto lbl;
+ return;
...
- lbl:
-       return;

---
spatch --allow-inconsistent-paths --sp-file file.spatch --dir
drivers/gpu/drm/msm/disp/dpu1 --in-place
---
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Per chapter 15 of coding-style, removing 'inline' keyword from functions
that are larger than a typical macro. In a couple of cases I've
simplified the function and kept the inline.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

It's unused, remove it.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

These functions aren't used anywhere, remove them.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

We call out of the virt encoder into phys only to call back into the
virt for hw reset. So remove the indirection and just call the virt
function directly.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since we removed all suspend logic from the crtc code (see patch 3/4),
dpu_crtc_reset does the same things as drm_atomic_helper_crtc_reset, so let's
just replace it with a call to the atomic helper.

v3: added patch to patchset
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since drm core's modeset locks serialize atomic commits, we don't need to
track whether or not we're in a suspended state from inside the crtc for
dpu_crtc_enable/disable. This patch removes the suspend logic from the crtc and
removes the relevant tracing from dpu_trace. Since we removed all calls
to dpu_kms_is_suspend_state, we can remove that function and the
suspend_state field of dpu_kms as well.

v2: added patch to patchset
v3: reworded commit body and moved deletion of dpu_kms_is_suspend_state and
suspend_state to this patch
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Removes the traces of the non-atomic helper calls in
msm_pm_suspend/resume since we just deleted those functions (see patch
1). Also removes the drm_kms_helper_poll_disable/enable calls, since
the DRM_CONNECTOR_POLL_CONNECT flag is never set so periodic polling
doesn't happen anyways.

v2: reorganized patch order
v3: made error checks less severe
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

PM resume was crashing during dpu_kms_pm_resume. This patch removes
dpu_kms_pm_suspend/resume so that msm_pm_suspend/resume uses the atomic
helpers instead (see next patch). This patch also removes
dpu_kms_is_suspend_blocked since it is never called.

v2: Reorganized patches in patchset
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

I found these tracepoints useful for debugging cursor/ctl, someone else
might find them useful too
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Final changes to drm-misc-next for v4.21:

UAPI Changes:

Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
  drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.

Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
  v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
  prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: added drm/v3d: fix broken build to the merge commit]
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/321be9d3-ab75-5f92-8193-e5113662edef@linux.intel.com

Pull request of 2018-12-05

Page flip with damage by Deepak and others,
Various vmwgfx minor fixes anc cleanups.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205103554.3675-1-thellstrom@vmware.com