- 22 Jan, 2020 1 commit
-
-
Jules Irenge authored
Sparse reports a warning at __run_hrtimer() |warning: context imbalance in __run_hrtimer() - unexpected unlock Add the missing must_hold() annotation. Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200120224347.51843-1-jbi.octave@gmail.com
-
- 16 Jan, 2020 20 commits
-
-
https://git.linaro.org/people/daniel.lezcano/linuxThomas Gleixner authored
Pull clocksource/events driver updates from Daniel Lezcano - Add suspend/resume for Hyper-V clocksource (Dexuan Cui) - Fix Kconfig indentation (Krzysztof Kozlowski) - Add SoC specific bindings for RZ/G2N (r8a774b1) (Biju Das) - Add Microchip PIT64B support (Claudiu Beznea) - Convert the cadence ttc driver to a platform driver to initialize later (Rajan Vaja) - Fix a memory leak when the initialization fails on bcm2835 (Colin Ian King) - Use the combo devm_platform_ioremap_resource() function for em-sti, ti-dm and switch to platform_get_irq (Yangtao Li) - Fix Exynos naming in the driver (Krzysztof Kozlowski) - Fix an uninitialized pointer access in ti-dm timer (Tony Lindgren) - Fix a sparse warning in microchip-pit64b (Claudiu Beznea) - Code reorg without functional changes for Hyper-V clocksource (Andrea Parri) - Decrease the Hyper-V clocksource rating in order to let the stable TSC to be selected instead (Andrea Parri) -
Christophe Leroy authored
Only perform READ_ONCE(vd[CS_HRES_COARSE].hrtimer_res) for HRES and RAW clocks. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Thomas Gleixner authored
The confinement of the 32bit specific VDSO functions missed to define BUILD_VDSO32 when building a 32bit MIPS kernel: arch/mips/vdso/vgettimeofday.c: In function __vdso_clock_gettime: arch/mips/vdso/vgettimeofday.c:17:9: error: implicit declaration of function __cvdso_clock_gettime32 arch/mips/vdso/vgettimeofday.c: In function __vdso_clock_getres: arch/mips/vdso/vgettimeofday.c:39:9: error: implicit declaration of function __cvdso_clock_getres_time32 Force the define for 32bit builds in the VDSO Makefile. Fixes: bf279849 ("lib/vdso: Build 32 bit specific functions in the right context") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Paul Burton <paulburton@kernel.org> Link: https://lore.kernel.org/r/87d0bjfaqa.fsf@nanos.tec.linutronix.de
-
Andrea Parri authored
Change the Hyper-V clocksource ratings to 250, below the TSC clocksource rating of 300. In configurations where Hyper-V offers an InvariantTSC, the TSC is not marked "unstable", so the TSC clocksource is available and preferred. With the higher rating, it will be the default. On older hardware and Hyper-V versions, the TSC is marked "unstable", so no TSC clocksource is created and the selected Hyper-V clocksource will be the default. Signed-off-by:
Andrea Parri <parri.andrea@gmail.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200109160650.16150-3-parri.andrea@gmail.com
-
Andrea Parri authored
hyperv_timer.c exports hyperv_cs, which is used by stimers and the timesync mechanism. However, the clocksource dependency is not needed: these mechanisms only depend on the partition reference counter (which can be read via a MSR or via the TSC Reference Page). Introduce the (function) pointer hv_read_reference_counter, as an embodiment of the partition reference counter read, and export it in place of the hyperv_cs pointer. The latter can be removed. This should clarify that there's no relationship between Hyper-V stimers & timesync and the Linux clocksource abstractions. No functional or semantic change. Suggested-by:
-
Claudiu Beznea authored
Fix sparse warning: "warning: Using plain integer as NULL pointer" Reported-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Tony Lindgren authored
Clean-up commit 8c82723414d5 ("clocksource/drivers/timer-ti-dm: Switch to platform_get_irq") caused a regression where we now try to access uninitialized data for timer: drivers/clocksource/timer-ti-dm.c: In function 'omap_dm_timer_probe': drivers/clocksource/timer-ti-dm.c:798:13: warning: 'timer' may be used uninitialized in this function [-Wmaybe-uninitialized] On boot we now get: Unable to handle kernel NULL pointer dereference at virtual address 00000004 ... (omap_dm_timer_probe) from [<c061ac7c>] (platform_drv_probe+0x48/0x98) (platform_drv_probe) from [<c0618c04>] (really_probe+0x1dc/0x348) (really_probe) from [<c0618ef4>] (driver_probe_device+0x5c/0x160) Let's fix the issue by moving platform_get_irq to happen after timer has been allocated. Fixes: bc83cadd ("clocksource/drivers/timer-ti-dm: Switch to platform_get_irq") Cc: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:Tony Lindgren <tony@atomide.com> Acked-by:
Olof Johansson <olof@lixom.net> Acked-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
platform_get_resource(pdev, IORESOURCE_IRQ) is not recommended for requesting IRQ's resources, as they can be not ready yet. Using platform_get_irq() instead is preferred for getting IRQ even if it was not retrieved earlier. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code, which wraps 'platform_get_resource' and 'devm_ioremap_resource' in a single helper. Signed-off-by:
-
Yangtao Li authored
'irq' and 'ret' are variables of the same type and there is no need to use two lines. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code, which wraps 'platform_get_resource' and 'devm_ioremap_resource' in a single helper. Signed-off-by:
-
Colin Ian King authored
Currently when setup_irq fails the error exit path will leak the recently allocated timer structure. Originally the code would throw a panic but a later commit changed the behaviour to return via the err_iounmap path and hence we now have a memory leak. Fix this by adding a err_timer_free error path that kfree's timer. Addresses-Coverity: ("Resource Leak") Fixes: 524a7f08 ("clocksource/drivers/bcm2835_timer: Convert init function to return error") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Rajan Vaja authored
Currently TTC driver is TIMER_OF_DECLARE type driver. Because of that, TTC driver may be initialized before other clock drivers. If TTC driver is dependent on that clock driver then initialization of TTC driver will failed. So use TTC driver as platform driver instead of using TIMER_OF_DECLARE. Signed-off-by:
Rajan Vaja <rajan.vaja@xilinx.com> Tested-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
-
Claudiu Beznea authored
Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by:
-
Boqun Feng authored
Currently, the reserved size for a tsc page is 4K, which is enough for communicating with hypervisor. However, in the case where we want to export the tsc page to userspace (e.g. for vDSO to read the clocksource), the tsc page should be at least PAGE_SIZE, otherwise, when PAGE_SIZE is larger than 4K, extra kernel data will be mapped into userspace, which means leaking kernel information. Therefore reserve PAGE_SIZE space for tsc_pg as a preparation for the vDSO support of ARM64 in the future. Also, while at it, replace all reference to tsc_pg with hv_get_tsc_page() since it should be the only interface to access tsc page. Signed-off-by:
Boqun Feng (Microsoft) <boqun.feng@gmail.com> Cc: linux-hyperv@vger.kernel.org Reviewed-by:
-
Randy Dunlap authored
Fix lots of typo, spelling, punctuation, and grammar miscues in drivers/clocksource/Kconfig. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Biju Das authored
Document SoC specific bindings for RZ/G2N (r8a774b1) SoC. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
-
Dexuan Cui authored
This is needed for hibernation, e.g. when we resume the old kernel, we need to disable the "current" kernel's TSC page and then resume the old kernel's. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
-
- 15 Jan, 2020 2 commits
-
-
Chunyan Zhang authored
Suspend to IDLE invokes tick_unfreeze() on resume. tick_unfreeze() on the first resuming CPU resumes timekeeping, which also has the side effect of resetting the softlockup watchdog on this CPU. But on the secondary CPUs the watchdog is not reset in the resume / unfreeze() path, which can result in false softlockup warnings on those CPUs depending on the time spent in suspend. Prevent this by clearing the softlock watchdog in the unfreeze path also on the secondary resuming CPUs. [ tglx: Massaged changelog ] Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
-
Stephen Boyd authored
The alarmtimer_rtc_add_device() function creates a wakeup source and then tries to grab a module reference. If that fails the function returns early with an error code, but fails to remove the wakeup source. Cleanup this exit path so there is no dangling wakeup source, which is named 'alarmtime' left allocated which will conflict with another RTC device that may be registered later. Fixes: 51218298 ("alarmtimer: Ensure RTC module is not unloaded") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200109155910.907-2-swboyd@chromium.org
-
- 14 Jan, 2020 17 commits
-
-
Andrei Vagin authored
Output on success: 1..1 ok 1 exec # Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output on failure: 1..1 not ok 1 36016 16 Bail out! Output with lack of permissions: 1..1 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..1 not ok 1 # SKIP Time namespaces are not supported Co-developed-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
-
Andrei Vagin authored
Output on success: 1..4 ok 1 host: clock: monotonic cycles: 148323947 ok 2 host: clock: boottime cycles: 148577503 ok 3 ns: clock: monotonic cycles: 137659217 ok 4 ns: clock: boottime cycles: 137959154 # Pass 4 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..4 ok 1 host: clock: monotonic cycles: 145671139 ok 2 host: clock: boottime cycles: 146958357 not ok 3 # SKIP need to run as root Output without support of time namespaces: 1..4 ok 1 host: clock: monotonic cycles: 145671139 ok 2 host: clock: boottime cycles: 146958357 not ok 3 # SKIP Time namespaces are not supported Co-developed-by:
-
Andrei Vagin authored
Check that timer_create() takes into account clock offsets. Output on success: 1..3 ok 1 clockid=7 ok 2 clockid=1 ok 3 clockid=9 # Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..3 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..3 not ok 1 # SKIP Time namespaces are not supported Co-developed-by:
-
Dmitry Safonov authored
Check that /proc/uptime is correct inside a new time namespace. Output on success: 1..1 ok 1 Passed for /proc/uptime # Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..1 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..1 not ok 1 # SKIP Time namespaces are not supported Co-developed-by:
-
Andrei Vagin authored
Check that clock_nanosleep() takes into account clock offsets. Output on success: 1..4 ok 1 clockid: 1 abs:0 ok 2 clockid: 1 abs:1 ok 3 clockid: 9 abs:0 ok 4 clockid: 9 abs:1 Output with lack of permissions: 1..4 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..4 not ok 1 # SKIP Time namespaces are not supported Co-developed-by:
-
Andrei Vagin authored
Check that timerfd_create() takes into account clock offsets. Output on success: 1..3 ok 1 clockid=7 ok 2 clockid=1 ok 3 clockid=9 # Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output on failure: 1..3 not ok 1 clockid: 7 elapsed: 0 not ok 2 clockid: 1 elapsed: 0 not ok 3 clockid: 9 elapsed: 0 Bail out! Output with lack of permissions: 1..3 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..3 not ok 1 # SKIP Time namespaces are not supported Co-developed-by:
-
Dmitry Safonov authored
A test to check that all supported clocks work on host and inside a new time namespace. Use both ways to get time: through VDSO and by entering the kernel with implicit syscall. Introduce a new timens directory in selftests framework for the next timens tests. Output on success: 1..10 ok 1 Passed for CLOCK_BOOTTIME (syscall) ok 2 Passed for CLOCK_BOOTTIME (vdso) ok 3 Passed for CLOCK_BOOTTIME_ALARM (syscall) ok 4 Passed for CLOCK_BOOTTIME_ALARM (vdso) ok 5 Passed for CLOCK_MONOTONIC (syscall) ok 6 Passed for CLOCK_MONOTONIC (vdso) ok 7 Passed for CLOCK_MONOTONIC_COARSE (syscall) ok 8 Passed for CLOCK_MONOTONIC_COARSE (vdso) ok 9 Passed for CLOCK_MONOTONIC_RAW (syscall) ok 10 Passed for CLOCK_MONOTONIC_RAW (vdso) # Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..10 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..10 not ok 1 # SKIP Time namespaces are not supported Co-developed-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
-
Andrei Vagin authored
API to set time namespace offsets for children processes, i.e.: echo "$clockid $offset_sec $offset_nsec" > /proc/self/timens_offsets Co-developed-by:
-
Dmitry Safonov authored
The VVAR page layout depends on whether a task belongs to the root or non-root time namespace. Whenever a task changes its namespace, the VVAR page tables are cleared and then they will be re-faulted with a corresponding layout. Co-developed-by:
-
Dmitry Safonov authored
As timens page has offsets to data on VVAR page VVAR is going to be accessed shortly. Set it up with timens in one page fault as optimization. Suggested-by:
-
Dmitry Safonov authored
If a task belongs to a time namespace then the VVAR page which contains the system wide VDSO data is replaced with a namespace specific page which has the same layout as the VVAR page. Co-developed-by:
-
Dmitry Safonov authored
VDSO support for Time namespace needs to set up a page with the same layout as VVAR. That timens page will be placed on position of VVAR page inside namespace. That page contains time namespace clock offsets and it has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. Allocate the timens page during namespace creation. Setup the offsets when the first task enters the ns and freeze them to guarantee the pace of monotonic/boottime clocks and to avoid breakage of applications. The design decision is to have a global offset_lock which is used during namespace offsets setup and to freeze offsets when the first task joins the new time namespace. That is better in terms of memory usage compared to having a per namespace mutex that's used only during the setup period. Suggested-by:
Andy Lutomirski <luto@kernel.org> Based-on-work-by:
-
Dmitry Safonov authored
To support time namespaces in the VDSO with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide VDSO data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the VDSO data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. Allocate the time namespace page among VVAR pages and place vdso_data on it. Provide __arch_get_timens_vdso_data() helper for VDSO code to get the code-relative position of VVARs on that special page. Co-developed-by:
-
Dmitry Safonov authored
VDSO support for time namespaces needs to set up a page with the same layout as VVAR. That timens page will be placed on position of VVAR page inside namespace. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. To prepare the time namespace page the kernel needs to know the vdso_data offset. Provide arch_get_vdso_data() helper for locating vdso_data on VVAR page. Co-developed-by:
-
Thomas Gleixner authored
To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by:
-
Dmitry Safonov authored
Forbid splitting VVAR VMA resulting in a stricter ABI and reducing the amount of corner-cases to consider while working further on VDSO time namespace support. As the offset from timens to VVAR page is computed compile-time, the pages in VVAR should stay together and not being partically mremap()'ed. Co-developed-by:
-
Dmitry Safonov authored
Make sure that /proc/uptime is adjusted to the tasks time namespace. Co-developed-by:
-
