- 02 Jul, 2014 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-06-27 Please pull the following batch of fixes for the 3.16 stream... For the mac80211 bits, Johannes says: "We have a fix from Eliad for a time calculation, a fix from Max for head/tailroom when sending authentication packets, a revert that Felix requested since the patch in question broke regulatory and a fix from myself for an issue with a new command that we advertised in the wrong place." For the bluetooth bits, Gustavo says: "A few fixes for 3.16. This pull request contains a NULL dereference fix, and some security/pairing fixes." For the iwlwifi bits, Emmanuel says: "I have here a fix from Eliad for scheduled scan: it fixes a firmware assertion. Arik reverts a patch I made that didn't take into account that 3160 doesn't have UAPSD and hence, we can't assume that all newer firmwares support the feature. Here too, the visible effect is a firmware assertion. Along with that, we have a few fixes and additions to the device list." For the ath10k bits, Kalle says: "Bartosz fixed an issue where we were not able to create 8 vdevs when using DFS. Michal removed a false warning which was just confusing people." On top of that... Arend van Spriel fixes a 'divide by zero' regression in brcmfmac. Amitkumar Karwar corrects a transmit timeout in mwifiex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Hardware will provide this information as soon as we will start processing incoming packets, so there is no need to set the RX buffer length during buffer allocation. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We use the PHY library which will determine the link state for us, make sure we start with a carrier off until libphy has completed the link training. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
As soon as register_netdev() is called, the network device notifiers are running which means that other parts of the kernel, or user-space programs can call the network device ndo_open() callback and use the interface. Disable the Ethernet device clock before we register the network device such that we do not create the following situation: CPU0 CPU1 register_netdev() bcmgenet_open() clk_prepare_enable() clk_disable_unprepare() and leave the hardware block gated off, while we think it should be gated on. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Although we do not limit the number of packets the TX completion function bcm_sysport_tx_reclaim() is allowed to reclaim, we were still using its return value as-is. This means that we could hit the WARN() in net/core/dev.c where work_done >= budget. Make sure we do exit the NAPI context when the TX ring is empty, and pretend there was no work to do. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The UniMAC CMD_SW_RESET bit is not a self-clearing bit, so we need to assert it, wait a bit and clear it manually. As a result, umac_reset() is updated not to return any value. The previous version of the code simply wrote 0 to the CMD register, which would make the busy-waiting loop exit immediately, having zero effect. By writing 0 to the CMD register, we were clearing all bits in the CMD register, and not using the hardware reset default values which are set on purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The SYSTEMPORT Ethernet MAC supports multicast just fine, it just lacks any sort of Unicast/Broadcast/Multicasting filtering at the Ethernet MAC level since that is handled by the front end Ethernet switch, but that is properly handled by bcm_sysport_set_rx_mode(). Some user-space applications might be relying on the presence of this flag to prevent using multicast sockets, this also prevents that interface from joining the IPv6 all-router mcast group. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Jul, 2014 2 commits
-
-
Eric Dumazet authored
While it is legal to kfree(NULL), it is not wise to use : put_page(virt_to_head_page(NULL)) BUG: unable to handle kernel paging request at ffffeba400000000 IP: [<ffffffffc01f5928>] virt_to_head_page+0x36/0x44 [bnx2x] Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Fixes: d46d132c ("bnx2x: use netdev_alloc_frag()") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We have two different ways to handle changes to sk->sk_dst First way (used by TCP) assumes socket lock is owned by caller, and use no extra lock : __sk_dst_set() & __sk_dst_reset() Another way (used by UDP) uses sk_dst_lock because socket lock is not always taken. Note that sk_dst_lock is not softirq safe. These ways are not inter changeable for a given socket type. ipv4_sk_update_pmtu(), added in linux-3.8, added a race, as it used the socket lock as synchronization, but users might be UDP sockets. Instead of converting sk_dst_lock to a softirq safe version, use xchg() as we did for sk_rx_dst in commit e47eb5df ("udp: ipv4: do not use sk_dst_lock from softirq context") In a follow up patch, we probably can remove sk_dst_lock, as it is only used in IPv6. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Fixes: 9cb3a50c ("ipv4: Invalidate the socket cached route on pmtu events if possible") Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Jun, 2014 6 commits
-
-
Denis Kirjanov authored
We have to return the boolean here if the tag presents or not, not just ANDing the TCI with the mask which results to: [ 709.412097] test_bpf: #18 LD_VLAN_TAG_PRESENT [ 709.412245] ret 4096 != 1 [ 709.412332] ret 4096 != 1 [ 709.412333] FAIL (2 times) Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Kirjanov authored
To get a full tag (and not just a VID) we should access the TCI except the VLAN_TAG_PRESENT field (which means that 802.1q header is present). Also ensure that the VLAN_TAG_PRESENT stay on its place Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Hangbin Liu authored
Based on RFC3810 6.2, we also need to check the hop limit and router alert option besides source address. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James M Leddy authored
Add MIB counters for rcvbuferrors in UDP to help diagnose problems. Signed-off-by: James M Leddy <james.leddy@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
MSI-X should use PCI_MSIX_FLAGS not PCI_MSI_FLAGS. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Jun, 2014 7 commits
-
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Small set of misc cifs/smb3 fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] fix mount failure with broken pathnames when smb3 mount with mapchars option cifs: revalidate mapping prior to satisfying read_iter request with cache=loose fs/cifs: fix regression in cifs_create_mf_symlink()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: "Various minor fixes" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Change name used in hwmon_device_register_with_groups hwmon: (emc1403) Fix missing 'select REGMAP_I2C' in Kconfig hwmon: (ntc_thermistor) Use the manufacturer name properly devicetree: bindings: Document murata vendor prefix hwmon: (w83l786ng) Report correct minimum fan speed
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix crash in ipvs tot_stats estimator, from Julian Anastasov. 2) Fix OOPS in nf_nat on netns removal, from Florian Westphal. 3) Really really really fix locking issues in slip and slcan tty write wakeups, from Tyler Hall. 4) Fix checksum offloading in fec driver, from Fugang Duan. 5) Off by one in BPF instruction limit test, from Kees Cook. 6) Need to clear all TSO capability flags when doing software TSO in tg3 driver, from Prashant Sreedharan. 7) Fix memory leak in vlan_reorder_header() error path, from Li RongQing. 8) Fix various bugs in xen-netfront and xen-netback multiqueue support, from David Vrabel and Wei Liu. 9) Fix deadlock in cxgb4 driver, from Li RongQing. 10) Prevent double free of no-cache DST entries, from Eric Dumazet. 11) Bad csum_start handling in skb_segment() leads to crashes when forwarding, from Tom Herbert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: fix setting csum_start in skb_segment() ipv4: fix dst race in sk_dst_get() net: filter: Use kcalloc/kmalloc_array to allocate arrays trivial: net: filter: Change kerneldoc parameter order trivial: net: filter: Fix typo in comment net: allwinner: emac: Add missing free_irq cxgb4: use dev_port to identify ports xen-netback: bookkeep number of active queues in our own module tg3: Change nvram command timeout value to 50ms cxgb4: Not need to hold the adap_rcu_lock lock when read adap_rcu_list be2net: fix qnq mode detection on VFs of: mdio: fixup of_phy_register_fixed_link parsing of new bindings at86rf230: fix irq setup net: phy: at803x: fix coccinelle warnings net/mlx4_core: Fix the error flow when probing with invalid VF configuration tulip: Poll link status more frequently for Comet chips net: huawei_cdc_ncm: increase command buffer size drivers: net: cpsw: fix dual EMAC stall when connected to same switch xen-netfront: recreate queues correctly when reconnecting xen-netfront: fix oops when disconnected from backend ...
-
Tom Herbert authored
Dave Jones reported that a crash is occurring in csum_partial tcp_gso_segment inet_gso_segment ? update_dl_migration skb_mac_gso_segment __skb_gso_segment dev_hard_start_xmit sch_direct_xmit __dev_queue_xmit ? dev_hard_start_xmit dev_queue_xmit ip_finish_output ? ip_output ip_output ip_forward_finish ip_forward ip_rcv_finish ip_rcv __netif_receive_skb_core ? __netif_receive_skb_core ? trace_hardirqs_on __netif_receive_skb netif_receive_skb_internal napi_gro_complete ? napi_gro_complete dev_gro_receive ? dev_gro_receive napi_gro_receive It looks like a likely culprit is that SKB_GSO_CB()->csum_start is not set correctly when doing non-scatter gather. We are using offset as opposed to doffset. Reported-by: Dave Jones <davej@redhat.com> Tested-by: Dave Jones <davej@redhat.com> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 7e2b10c1 ("net: Support for multiple checksums with gso") Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: "Highlights include: - Stable fix for a data corruption case due to incorrect cache validation - Fix a couple of false positive cache invalidations - Fix NFSv4 security negotiation issues" * tag 'nfs-for-3.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: test SECINFO RPC_AUTH_GSS pseudoflavors for support NFS Return -EPERM if no supported or matching SECINFO flavor NFS check the return of nfs4_negotiate_security in nfs4_submount NFS: Don't mark the data cache as invalid if it has been flushed NFS: Clear NFS_INO_REVAL_PAGECACHE when we update the file size nfs: Fix cache_validity check in nfs_write_pageuptodate()
-
Eric Dumazet authored
When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dormando <dormando@rydia.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Jun, 2014 18 commits
-
-
Tobias Klauser authored
Use kcalloc/kmalloc_array to make it clear we're allocating arrays. No integer overflow can actually happen here, since len/flen is guaranteed to be less than BPF_MAXINSNS (4096). However, this changed makes sure we're not going to get one if BPF_MAXINSNS were ever increased. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Change the order of the parameters to sk_unattached_filter_create() in the kerneldoc to reflect the order they appear in the actual function. This fix is only cosmetic, in the generated doc they still appear in the correct order without the fix. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxime Ripard authored
If the mdio probe function fails in emac_open, the interrupt we just requested isn't freed. If emac_open is called again, for example because we try to set up the interface again, the kernel will oops because the interrupt wasn't properly released. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
Commit 3f85944f ("net: Add sysfs file for port number") introduce dev_port to network devices. cxgb4 adapters have multiple ports on the same PCI function, and used dev_id to identify those ports. That use was removed by commit 8c367fcb ("cxgb4: Do not set net_device::dev_id to VI index"), since dev_id should be used only when devices share the same MAC address. Using dev_port for cxgb4 allows different ports on the same PCI function to be identified. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Liu authored
The original code uses netdev->real_num_tx_queues to bookkeep number of queues and invokes netif_set_real_num_tx_queues to set the number of queues. However, netif_set_real_num_tx_queues doesn't allow real_num_tx_queues to be smaller than 1, which means setting the number to 0 will not work and real_num_tx_queues is untouched. This is bogus when xenvif_free is invoked before any number of queues is allocated. That function needs to iterate through all queues to free resources. Using the wrong number of queues results in NULL pointer dereference. So we bookkeep the number of queues in xen-netback to solve this problem. This fixes a regression introduced by multiqueue patchset in 3.16-rc1. There's another bug in original code that the real number of RX queues is never set. In current Xen multiqueue design, the number of TX queues and RX queues are in fact the same. We need to set the numbers of TX and RX queues to the same value. Also remove xenvif_select_queue and leave queue selection to core driver, as suggested by David Miller. Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> CC: Ian Campbell <ian.campbell@citrix.com> CC: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prashant Sreedharan authored
Commit 506724c4 "tg3: Override clock, link aware and link idle mode during NVRAM dump" changed the timeout value for nvram command execution from 100ms to 1ms. But the 1ms timeout value was only sufficient for nvram read operations but not write operations for most of the devices supported by tg3 driver. This patch sets the MAX to 50ms. Also it uses usleep_range instead of udelay. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julien D'Ascenzio authored
Since commit 648cd48c The hwmon name attributes must not include '-' so the name must be rename from gpio-fan to gpio_fan Signed-off-by: Julien D'Ascenzio <jdascenzio@yahoo.fr> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A new set of bug fixes for 3.16, containing patches for seven platforms: at91: - drivers/misc fix for Kconfig PWM symbol - correction of several values in DT after conversion to CCF - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc imx: - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51, because controller base CD/WP is not working in esdhc driver due to runtime PM support - A couple of random ventana gw5xxx board fixes - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving IPUv3 driver out of staging tree - Fix enet/fec clock selection on imx6sl - Fix display node on imx53-m53evk board - A couple of Cubox-i updates from Russell, which were omitted from the merge window due to dependency integrator: - fix an OF-related regression against 3.15 mvebu: - mvebu (v7) - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - Enable Dove SoC in mvebu_v7_defconfig - kirkwood - Fix phy-connection-type on GuruPlug board qcom: - enable gsbi driver in defconfig - fix section mismatch warning in serial driver samsung: - use WFI macro in platform_do_lowpower because exynos cpuhotplug includes a hardcoded WFI instruction and it causes compile error in Thumb-2 mode. - fix GIC reg sizes for exynos4 SoCs - remove reset timer counter value during boot and resume for mct to fix a big jump in printk timestamps - fix pm code to check cortex-A9 for another exynos SoCs - don't rely on firmware's secondary_cpu_start for mcpm sti: - Ethernet clocks were wrongly defined for STiH415/416 platforms - STiH416 B2020 revision E DTS file name contained uppercase, change to lowercase" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: at91/dt: sam9261: remove slow RC osc ARM: at91/dt: define sam9261ek slow crystal frequency ARM: at91/dt: sam9261: correctly define mainck ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values misc: atmel_pwm: fix Kconfig symbols ARM: integrator: fix OF-related regression ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. ARM: dts: imx51-babbage: Fix esdhc setup ARM: dts: mx5: Move the display out of soc {} node ARM: dts: mx5: Fix IPU port node placement ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE ARM: multi_v7_defconfig: Add QCOM GSBI driver ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts tty: serial: msm: Fix section mismatch warning ...
-
Arend van Spriel authored
The function brcmf_usb_dlneeded() queries the device to obtain the chip id and revision. So assigning these in bus interface before the call resulted in chip id and revision being zero. This was introduced by: commit 5b8045d4 Author: Arend van Spriel <arend@broadcom.com> Date: Tue May 27 12:56:23 2014 +0200 brcmfmac: use asynchronous firmware request in USB Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Cc: <stable@vger.kernel.org> Reported-by: Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by: Linus Gasser <list@markas-al-nour.org> Reported-by: Michael Hirsch <hirsch@teufel.de> Tested-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
git://github.com/at91linux/linux-at91Arnd Bergmann authored
Merge "First AT91 fixes batch for 3.16" from Nicolas Ferre: - drivers/misc fix for Kconfig PWM symbol - correction of several values in DT after conversion to CCF - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: sam9261: remove slow RC osc ARM: at91/dt: define sam9261ek slow crystal frequency ARM: at91/dt: sam9261: correctly define mainck ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values misc: atmel_pwm: fix Kconfig symbols
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Merge "mvebu fixes for v3.16" from Jason Cooper: - mvebu - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - kirkwood - Fix phy-connection-type on GuruPlug board * tag 'mvebu-fixes-3.16' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fix from Sage Weil: "This fixes a corner case for cloned RBD images" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: handle parent_overlap on writes correctly
-
Alexandre Belloni authored
The at91sam9261 doesn't actually have a slow RC oscillator, remove it from the dtsi. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-