- 10 Jan, 2015 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "All a few small regression or stable fixes: a Nvidia HDMI ID addition, a regression fix for CAIAQ stream count, a typo fix for GPIO setup with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix" * tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fireworks: fix an endianness bug for transaction length ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs ALSA: snd-usb-caiaq: fix stream count check
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - bounds checking fixes in logitech and roccat drivers, from Peter Wu and Dan Carpenter - double-kfree fix in i2c-hid driver on bus shutdown, from Mika Westerberg - a couple of various small driver fixes - a few device id additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: roccat: potential out of bounds in pyra_sysfs_write_settings() HID: Add a new id 0x501a for Genius MousePen i608X HID: logitech-hidpp: prefix the name with "Logitech" HID: logitech-hidpp: avoid unintended fall-through HID: Allow HID_BATTERY_STRENGTH to be enabled HID: i2c-hid: Do not free buffers in i2c_hid_stop() HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard HID: logitech-hidpp: check WTP report length HID: logitech-dj: check report length
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "I'm briefly working between holidays and LCA, so this is close to a couple of weeks of fixes, Two sets of amdkfd fixes, this is a new feature this kernel, and this pull fixes a few issues since it got merged, ordering when built-in to kernel and also the iommu vs gpu ordering patch, it also reworks the ioctl before the initial release. Otherwise: - radeon: some misc fixes all over, hdmi, 4k, dpm - nouveau: mcp77 init fixes, oops fix, bug on fix, msi fix - i915: power fixes, revert VGACNTR patch Probably be quiteer next week since I'll be at LCA anyways" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits) drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl() drm/amdkfd: reformat IOCTL definitions to drm-style drm/amdkfd: Do copy_to/from_user in general kfd_ioctl() drm/radeon: integer underflow in radeon_cp_dispatch_texture() drm/radeon: adjust default bapm settings for KV drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw drm/radeon: fix sad_count check for dce3 drm/radeon: KV has three PPLLs (v2) drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS) drm/radeon: Init amdkfd only if it was compiled amdkfd: actually allocate longs for the pasid bitmask drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP drm/nv4c/mc: disable msi drm/nouveau/fb/ram/mcp77: enable NISO poller drm/nouveau/fb/ram/mcp77: use carveout reg to determine size drm/nouveau/fb/ram/mcp77: subclass nouveau_ram drm/nouveau: wake up the card if necessary during gem callbacks drm/nouveau/device: Add support for GK208B, resolves bug 86935 drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate drm/nouveau/bios: fix oops on pre-nv50 chipsets ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Here is a handful of minor arm64 fixes discovered and fixed over the Christmas break. The main part is adding some missing #includes that we seem to be getting transitively but have started causing problems in -next. - Fix early mapping fixmap corruption by EFI runtime services - Fix __NR_compat_syscalls off-by-one - Add missing sanity checks for some 32-bit registers - Add some missing #includes which we get transitively - Remove unused prepare_to_copy() macro" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/efi: add missing call to early_ioremap_reset() arm64: fix missing asm/io.h include in kernel/smp_spin_table.c arm64: fix missing asm/alternative.h include in kernel/module.c arm64: fix missing linux/bug.h include in asm/arch_timer.h arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h arm64: sanity checks: add missing AArch32 registers arm64: Remove unused prepare_to_copy() arm64: Correct __NR_compat_syscalls for bpf
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdbLinus Torvalds authored
Pull kgdb/kdb fixes from Jason Wessel: "These have been around since 3.17 and in kgdb-next for the last 9 weeks and some will go back to -stable. Summary of changes: Cleanups - kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE Fixes - kgdb/kdb: Allow access on a single core, if a CPU round up is deemed impossible, which will allow inspection of the now "trashed" kernel - kdb: Add enable mask for the command groups - kdb: access controls to restrict sensitive commands" * tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kernel/debug/debug_core.c: Logging clean-up kgdb: timeout if secondary CPUs ignore the roundup kdb: Allow access to sensitive commands to be restricted by default kdb: Add enable mask for groups of commands kdb: Categorize kdb commands (similar to SysRq categorization) kdb: Remove KDB_REPEAT_NONE flag kdb: Use KDB_REPEAT_* values as flags kdb: Rename kdb_register_repeat() to kdb_register_flags() kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags kdb: Remove currently unused kdbtab_t->cmd_flags
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull two nfsd bugfixes from Bruce Fields. * 'for-3.19' of git://linux-nfs.org/~bfields/linux: rpc: fix xdr_truncate_encode to handle buffer ending on page boundary nfsd: fix fi_delegees leak when fi_had_conflict returns true
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull two Ceph fixes from Sage Weil: "These are both pretty trivial: a sparse warning fix and size_t printk thing" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix sparse endianness warnings ceph: use %zu for len in ceph_fill_inline_data()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "None of these are huge, but my commit does fix a regression from 3.18 that could cause lost files during log replay. This also adds Dave Sterba to the list of Btrfs maintainers. It doesn't mean we're doing things differently, but Dave has really been helping with the maintainer workload for years" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: don't delay inode ref updates during log replay Btrfs: correctly get tree level in tree_backref_for_extent Btrfs: call inode_dec_link_count() on mkdir error path Btrfs: abort transaction if we don't find the block group Btrfs, scrub: uninitialized variable in scrub_extent_for_parity() Btrfs: add more maintainers
-
- 09 Jan, 2015 2 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed memcg: fix destination cgroup leak on task charges migration mm: memcontrol: switch soft limit default back to infinity mm/debug_pagealloc: remove obsolete Kconfig options vfs: renumber FMODE_NONOTIFY and add to uniqueness check arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file MAINTAINERS: update rydberg's addresses mm: protect set_page_dirty() from ongoing truncation mm: prevent endless growth of anon_vma hierarchy exit: fix race between wait_consider_task() and wait_task_zombie() ocfs2: remove bogus check in dlm_process_recovery_data
-
Dan Carpenter authored
This is a static checker fix. We write some binary settings to the sysfs file. One of the settings is the "->startup_profile". There isn't any checking to make sure it fits into the pyra->profile_settings[] array in the profile_activated() function. I added a check to pyra_sysfs_write_settings() in both places because I wasn't positive that the other callers were correct. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 08 Jan, 2015 26 commits
-
-
Vlastimil Babka authored
Charles Shirron and Paul Cassella from Cray Inc have reported kswapd stuck in a busy loop with nothing left to balance, but kswapd_try_to_sleep() failing to sleep. Their analysis found the cause to be a combination of several factors: 1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait 2. The process has been killed (by OOM in this case), but has not yet been scheduled to remove itself from the waitqueue and die. 3. kswapd checks for throttled processes in prepare_kswapd_sleep(): if (waitqueue_active(&pgdat->pfmemalloc_wait)) { wake_up(&pgdat->pfmemalloc_wait); return false; // kswapd will not go to sleep } However, for a process that was already killed, wake_up() does not remove the process from the waitqueue, since try_to_wake_up() checks its state first and returns false when the process is no longer waiting. 4. kswapd is running on the same CPU as the only CPU that the process is allowed to run on (through cpus_allowed, or possibly single-cpu system). 5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd encounters no voluntary preemption points and repeatedly fails prepare_kswapd_sleep(), blocking the process from running and removing itself from the waitqueue, which would let kswapd sleep. So, the source of the problem is that we prevent kswapd from going to sleep until there are processes waiting on the pfmemalloc_wait queue, and a process waiting on a queue is guaranteed to be removed from the queue only when it gets scheduled. This was done to make sure that no process is left sleeping on pfmemalloc_wait when kswapd itself goes to sleep. However, it isn't necessary to postpone kswapd sleep until the pfmemalloc_wait queue actually empties. To prevent processes from being left sleeping, it's actually enough to guarantee that all processes waiting on pfmemalloc_wait queue have been woken up by the time we put kswapd to sleep. This patch therefore fixes this issue by substituting 'wake_up' with 'wake_up_all' and removing 'return false' in the code snippet from prepare_kswapd_sleep() above. Note that if any process puts itself in the queue after this waitqueue_active() check, or after the wake up itself, it means that the process will also wake up kswapd - and since we are under prepare_to_wait(), the wake up won't be missed. Also we update the comment prepare_kswapd_sleep() to hopefully more clearly describe the races it is preventing. Fixes: 5515061d ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vladimir Davydov authored
We are supposed to take one css reference per each memory page and per each swap entry accounted to a memory cgroup. However, during task charges migration we take a reference to the destination cgroup twice per each swap entry: first in mem_cgroup_do_precharge()->try_charge() and then in mem_cgroup_move_swap_account(), permanently leaking the destination cgroup. The hunk taking the second reference seems to be a leftover from the pre-00501b53 ("mm: memcontrol: rewrite charge API") era. Remove it to fix the leak. Fixes: e8ea14cc (mm: memcontrol: take a css reference for each charged page) Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
Commit 3e32cb2e ("mm: memcontrol: lockless page counters") accidentally switched the soft limit default from infinity to zero, which turns all memcgs with even a single page into soft limit excessors and engages soft limit reclaim on all of them during global memory pressure. This makes global reclaim generally more aggressive, but also inverts the meaning of existing soft limit configurations where unset soft limits are usually more generous than set ones. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joonsoo Kim authored
These are obsolete since commit e30825f1 ("mm/debug-pagealloc: prepare boottime configurable") was merged. So remove them. [pebolle@tiscali.nl: find obsolete Kconfig options] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Drysdale authored
Fix clashing values for O_PATH and FMODE_NONOTIFY on sparc. The clashing O_PATH value was added in commit 5229645b ("vfs: add nonconflicting values for O_PATH") but this can't be changed as it is user-visible. FMODE_NONOTIFY is only used internally in the kernel, but it is in the same numbering space as the other O_* flags, as indicated by the comment at the top of include/uapi/asm-generic/fcntl.h (and its use in fs/notify/fanotify/fanotify_user.c). So renumber it to avoid the clash. All of this has happened before (commit 12ed2e36: "fanotify: FMODE_NONOTIFY and __O_SYNC in sparc conflict"), and all of this will happen again -- so update the uniqueness check in fcntl_init() to include __FMODE_NONOTIFY. Signed-off-by: David Drysdale <drysdale@google.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jan Kara <jack@suse.cz> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
build error arch/blackfin/mach-bf533/boards/stamp.c:834:2: error: implicit declaration of function 'mdelay' Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Xue jiufei authored
In ocfs2_link(), the parent directory inode passed to function ocfs2_lookup_ino_from_name() is wrong. Parameter dir is the parent of new_dentry not old_dentry. We should get old_dir from old_dentry and lookup old_dentry in old_dir in case another node remove the old dentry. With this change, hard linking works again, when paths are relative with at least one subdirectory. This is how the problem was reproducable: # mkdir a # mkdir b # touch a/test # ln a/test b/test ln: failed to create hard link `b/test' => `a/test': No such file or directory However when creating links in the same dir, it worked well. Now the link gets created. Fixes: 0e048316 ("ocfs2: check existence of old dentry in ocfs2_link()") Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reported-by: Szabo Aron - UBIT <aron@ubit.hu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Tested-by: Aron Szabo <aron@ubit.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Henrik Rydberg authored
My ISP finally gave up on the old mail address, so I am moving things over to bitmath.org instead. Also change the status fields to better reflect reality. Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb4930 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
wait_consider_task() checks EXIT_ZOMBIE after EXIT_DEAD/EXIT_TRACE and both checks can fail if we race with EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE change in between, gcc needs to reload p->exit_state after security_task_wait(). In this case ->notask_error will be wrongly cleared and do_wait() can hang forever if it was the last eligible child. Many thanks to Arne who carefully investigated the problem. Note: this bug is very old but it was pure theoretical until commit b3ab0316 ("wait: completely ignore the EXIT_DEAD tasks"). Before this commit "-O2" was probably enough to guarantee that compiler won't read ->exit_state twice. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Arne Goedeke <el@laramies.com> Tested-by: Arne Goedeke <el@laramies.com> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
In dlm_process_recovery_data, only when dlm_new_lock failed the ret will be set to -ENOMEM. And in this case, newlock is definitely NULL. So test newlock is meaningless, remove it. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild fix from Michal Marek: "make mrproper / distclean stopped removing the generated debian/ directory in v3.16. This fixes it" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix removal of the debian/ directory
-
Michal Marek authored
The introduction of the uapi directories in v3.7-rc1 moved some of the generated headers from arch/*/include/generated to the uapi directory, keeping the #include directives intact. This creates a problem when bisecting, because the unversioned files are not cleaned automatically by git and the compiler might include stale headers as a result. Instead of cleaning them in the Makefiles, promote arch/*/include/generated/uapi in the search path. Under normal circumstances, there is no overlap between this uapi subdirectory and its parent, so the include choices remain the same. We keep arch/*/include/generated/uapi in the USERINCLUDE variable so that it is usable standalone. Note that we cannot completely swap the order of the uapi and kernel-only directories, since the headers in include/uapi/asm-generic are meant to be wrapped by their include/asm-generic counterparts when building kernel code. Reported-by: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Reported-by: David Drysdale <dmd@lurklurk.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fixes from Linus Walleij: "Allright allright I've been lazy over christmas and New Years. Here are a few collected pin control fixes eventually. Details: A set of assorted pin control fixes for the Rockchip and STi drivers" * tag 'pinctrl-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: st: Add irq_disable hook to st_gpio_irqchip pinctrl: st: avoid multiple mutex lock pinctrl: rockchip: Fix enable/disable/mask/unmask pinctrl: rockchip: Handle wakeup pins
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: "These are an ACPI device power management initialization fix (-stable material), two commits renaming stuff in the ACPI processor driver to make it more suitable for ARM64 processors and a new ACPI backlight blacklist entry. Specifics: - Fix ACPI power management intialization for device objects corresponding to devices that are not present at the init time (the _STA control method returns 0 for them) and therefore should not be regarded as power manageable (Rafael J Wysocki). - Rename a structure field and two functions used by the ACPI processor driver to make them less tied to architectures that use APICs (both x86 and ia64) and more suitable for ARM64 processors (Hanjun Guo). - Add a disable_native_backlight quirk for Dell XPS15 L521X designed in an unusual way preventing native backlight from working on that machine (Hans de Goede)" * tag 'pm+acpi-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu() ACPI / processor: Convert apic_id to phys_id to make it arch agnostic ACPI / PM: Fix PM initialization for devices that are not present
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull keyrings fixes from David Howells: "Two fixes: - Fix for the order in which things are done during key garbage collection to prevent named keyrings causing a crash [CVE-2014-9529]. - Fix assoc_array to explicitly #include rcupdate.h to prevent compilation errors under certain circumstances" * tag 'keys-fixes-20150107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: assoc_array: Include rcupdate.h for call_rcu() definition KEYS: close race between key lookup and freeing
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
pull virtio/vhost fixes from Michael Tsirkin: "This fixes a couple of bugs triggered by hot-unplug of virtio devices, as well as a regression in vhost-net" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/net: length miscalculation virtio_pci: document why we defer kfree virtio_pci: defer kfree until release callback virtio_pci: device-specific release callback virtio: make del_vqs idempotent
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: "Including: - a domain structure leak fix in the Intel VT-d driver - compile error fix for the VMSA IPMMU driver because of the IOMMU_EXEC -> IOMMU_NOEXEC conversion - two small cleanups as an aftermath of the merge window and the domain-leak fix" * tag 'iommu-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/rockchip: Drop owner assignment from platform_drivers iommu/vt-d: Remove dead code in device_notifier iommu/vt-d: Fix dmar_domain leak in iommu_attach_device iommu/ipmmu-vmsa: Change IOMMU_EXEC to IOMMU_NOEXEC
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a build problem with sha-mb with old toolchains and an implementation bug in the ctr(aes)/by8 branch of aesni-intel that's enabled when AVX is available" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha-mb - Add avx2_supported check. crypto: aesni - fix "by8" variant for 128 bit keys
-
Ilya Dryomov authored
The only real issue is the one in auth_x.c and it came with 3.19-rc1 merge. Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
-
Ilya Dryomov authored
len is size_t, should be printed with %zu. Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
-
Ard Biesheuvel authored
The early ioremap support introduced by patch bf4b558e ("arm64: add early_ioremap support") failed to add a call to early_ioremap_reset() at an appropriate time. Without this call, invocations of early_ioremap etc. that are done too late will go unnoticed and may cause corruption. This is exactly what happened when the first user of this feature was added in patch f84d0275 ("arm64: add EFI runtime services"). The early mapping of the EFI memory map is unmapped during an early initcall, at which time the early ioremap support is long gone. Fix by adding the missing call to early_ioremap_reset() to setup_arch(), and move the offending early_memunmap() to right after the point where the early mapping of the EFI memory map is last used. Fixes: f84d0275 ("arm64: add EFI runtime services") Cc: <stable@vger.kernel.org> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- Complete overhaul to the main IOCTL function, kfd_ioctl(), according to drm_ioctl() example. This includes changing the IOCTL definitions, so it breaks compatibility with previous versions of the userspace. However, because the kernel was not officialy released yet, and this the first kernel that includes amdkfd, I assume I can still do that at this stage. - A couple of bug fixes for the non-HWS path (used for bring-ups and debugging purposes only). * tag 'amdkfd-fixes-2015-01-06' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl() drm/amdkfd: reformat IOCTL definitions to drm-style drm/amdkfd: Do copy_to/from_user in general kfd_ioctl() drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS) drm/radeon: Assign VMID to PASID for IH in non-HWS mode drm/radeon: do not leave queue acquired if timeout happens in kgd_hqd_destroy() drm/amdkfd: Load mqd to hqd in non-HWS mode drm/amd: Fixing typos in kfd<->kgd interface
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
some minor radeon fixes. * 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: integer underflow in radeon_cp_dispatch_texture() drm/radeon: adjust default bapm settings for KV drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw drm/radeon: fix sad_count check for dce3 drm/radeon: KV has three PPLLs (v2)
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
- Fix BUG() on !SMP builds - Fix for OOPS on pre-NV50 that snuck into -next - MCP7[789A] hang fix where firmware hasn't already setup NISO pollers - NV4x IGP MSI disable, it doesn't appear to work correctly - Add GK208B to recognised boards (no code change aside from adding chipset recognition) * 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP drm/nv4c/mc: disable msi drm/nouveau/fb/ram/mcp77: enable NISO poller drm/nouveau/fb/ram/mcp77: use carveout reg to determine size drm/nouveau/fb/ram/mcp77: subclass nouveau_ram drm/nouveau: wake up the card if necessary during gem callbacks drm/nouveau/device: Add support for GK208B, resolves bug 86935 drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate drm/nouveau/bios: fix oops on pre-nv50 chipsets
-
- 07 Jan, 2015 4 commits
-
-
J. Bruce Fields authored
A struct xdr_stream at a page boundary might point to the end of one page or the beginning of the next, but xdr_truncate_encode isn't prepared to handle the former. This can cause corruption of NFSv4 READDIR replies in the case that a readdir entry that would have exceeded the client's dircount/maxcount limit would have ended exactly on a 4k page boundary. You're more likely to hit this case on large directories. Other xdr_truncate_encode callers are probably also affected. Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Fixes: 3e19ce76 "rpc: xdr_truncate_encode" Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Currently, nfs4_set_delegation takes a reference to an existing delegation and then checks to see if there is a conflict. If there is one, then it doesn't release that reference. Change the code to take the reference after the check and only if there is no conflict. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Pranith Kumar authored
Include rcupdate.h header to provide call_rcu() definition. This was implicitly being provided by slab.h file which include srcu.h somewhere in its include hierarchy which in-turn included rcupdate.h. Lately, tinification effort added support to remove srcu entirely because of which we are encountering build errors like lib/assoc_array.c: In function 'assoc_array_apply_edit': lib/assoc_array.c:1426:2: error: implicit declaration of function 'call_rcu' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Fix these by including rcupdate.h explicitly. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reported-by: Scott Wood <scottwood@freescale.com>
-
Takashi Sakamoto authored
Although the 't->length' is a big-endian value, it's used without any conversion. This means that the driver always uses 'length' parameter. Fixes: 555e8a8f("ALSA: fireworks: Add command/response functionality into hwdep interface") Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-