- 03 May, 2018 4 commits
-
-
Eric Dumazet authored
syzbot/KMSAN reported an uninit-value in put_cmsg(), originating from rds_cmsg_recv(). Simply clear the structure, since we have holes there, or since rx_traces might be smaller than RDS_MSG_RX_DGRAM_TRACE_MAX. BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in put_cmsg+0x600/0x870 net/core/scm.c:242 CPU: 0 PID: 4459 Comm: syz-executor582 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x600/0x870 net/core/scm.c:242 rds_cmsg_recv net/rds/recv.c:570 [inline] rds_recvmsg+0x2db5/0x3170 net/rds/recv.c:657 sock_recvmsg_nosec net/socket.c:803 [inline] sock_recvmsg+0x1d0/0x230 net/socket.c:810 ___sys_recvmsg+0x3fb/0x810 net/socket.c:2205 __sys_recvmsg net/socket.c:2250 [inline] SYSC_recvmsg+0x298/0x3c0 net/socket.c:2262 SyS_recvmsg+0x54/0x80 net/socket.c:2257 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 3289025a ("RDS: add receive message trace used by application") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: linux-rdma <linux-rdma@vger.kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that the { vendorid, productid, interfacenumber } set uniquely identifies one specific function. This has proven to fail for some configurable devices. One example is the Quectel EM06/EP06 where the same interface number can be either QMI or MBIM, without the device ID changing either. Fix by requiring the vendor-specific class for interface number based matching. Functions of other classes can and should use class based matching instead. Fixes: 03304bcb ("net: qmi_wwan: use fixed interface number matching") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d9 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d9 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999 ("route: do not cache fib route info on local routes with oif") Fixes: deed49df ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Several BPF sockmap fixes mostly related to bugs in error path handling, that is, a bug in updating the scatterlist length / offset accounting, a missing sk_mem_uncharge() in redirect error handling, and a bug where the outstanding bytes counter sg_size was not zeroed, from John. 2) Fix two memory leaks in the x86-64 BPF JIT, one in an error path where we still don't converge after image was allocated and another one where BPF calls are used and JIT passes don't converge, from Daniel. 3) Minor fix in BPF selftests where in test_stacktrace_build_id() we drop useless args in urandom_read and we need to add a missing newline in a CHECK() error message, from Song. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 May, 2018 17 commits
-
-
Alexei Starovoitov authored
John Fastabend says: ==================== When I added the test_sockmap to selftests I mistakenly changed the test logic a bit. The result of this was on redirect cases we ended up choosing the wrong sock from the BPF program and ended up sending to a socket that had no receive handler. The result was the actual receive handler, running on a different socket, is timing out and closing the socket. This results in errors (-EPIPE to be specific) on the sending side. Typically happening if the sender does not complete the send before the receive side times out. So depending on timing and the size of the send we may get errors. This exposed some bugs in the sockmap error path handling. This series fixes the errors. The primary issue is we did not do proper memory accounting in these cases which resulted in missing a sk_mem_uncharge(). This happened in the redirect path and in one case on the normal send path. See the three patches for the details. The other take-away from this is we need to fix the test_sockmap and also add more negative test cases. That will happen in bpf-next. Finally, I tested this using the existing test_sockmap program, the older sockmap sample test script, and a few real use cases with Cilium. All of these seem to be in working correctly. v2: fix compiler warning, drop iterator variable 'i' that is no longer used in patch 3. ==================== Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
When a redirect failure happens we release the buffers in-flight without calling a sk_mem_uncharge(), the uncharge is called before dropping the sock lock for the redirecte, however we missed updating the ring start index. When no apply actions are in progress this is OK because we uncharge the entire buffer before the redirect. But, when we have apply logic running its possible that only a portion of the buffer is being redirected. In this case we only do memory accounting for the buffer slice being redirected and expect to be able to loop over the BPF program again and/or if a sock is closed uncharge the memory at sock destruct time. With an invalid start index however the program logic looks at the start pointer index, checks the length, and when seeing the length is zero (from the initial release and failure to update the pointer) aborts without uncharging/releasing the remaining memory. The fix for this is simply to update the start index. To avoid fixing this error in two locations we do a small refactor and remove one case where it is open-coded. Then fix it in the single function. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
When an error occurs during a redirect we have two cases that need to be handled (i) we have a cork'ed buffer (ii) we have a normal sendmsg buffer. In the cork'ed buffer case we don't currently support recovering from errors in a redirect action. So the buffer is released and the error should _not_ be pushed back to the caller of sendmsg/sendpage. The rationale here is the user will get an error that relates to old data that may have been sent by some arbitrary thread on that sock. Instead we simple consume the data and tell the user that the data has been consumed. We may add proper error recovery in the future. However, this patch fixes a bug where the bytes outstanding counter sg_size was not zeroed. This could result in a case where if the user has both a cork'ed action and apply action in progress we may incorrectly call into the BPF program when the user expected an old verdict to be applied via the apply action. I don't have a use case where using apply and cork at the same time is valid but we never explicitly reject it because it should work fine. This patch ensures the sg_size is zeroed so we don't have this case. In the normal sendmsg buffer case (no cork data) we also do not zero sg_size. Again this can confuse the apply logic when the logic calls into the BPF program when the BPF programmer expected the old verdict to remain. So ensure we set sg_size to zero here as well. And additionally to keep the psock state in-sync with the sk_msg_buff release all the memory as well. Previously we did this before returning to the user but this left a gap where psock and sk_msg_buff states were out of sync which seems fragile. No additional overhead is taken here except for a call to check the length and realize its already been freed. This is in the error path as well so in my opinion lets have robust code over optimized error paths. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
When the call to do_tcp_sendpage() fails to send the complete block requested we either retry if only a partial send was completed or abort if we receive a error less than or equal to zero. Before returning though we must update the scatterlist length/offset to account for any partial send completed. Before this patch we did this at the end of the retry loop, but this was buggy when used while applying a verdict to fewer bytes than in the scatterlist. When the scatterlist length was being set we forgot to account for the apply logic reducing the size variable. So the result was we chopped off some bytes in the scatterlist without doing proper cleanup on them. This results in a WARNING when the sock is tore down because the bytes have previously been charged to the socket but are never uncharged. The simple fix is to simply do the accounting inside the retry loop subtracting from the absolute scatterlist values rather than trying to accumulate the totals and subtract at the end. Reported-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Eric Dumazet authored
Normally, a socket can not be freed/reused unless all its TX packets left qdisc and were TX-completed. However connect(AF_UNSPEC) allows this to happen. With commit fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows") we cleared f->time_next_packet but took no special action if the flow was still in the throttled rb-tree. Since f->time_next_packet is the key used in the rb-tree searches, blindly clearing it might break rb-tree integrity. We need to make sure the flow is no longer in the rb-tree to avoid this problem. Fixes: fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
This reverts commit edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6"). Eric reported a division by zero in rt6_multipath_rebalance() which is caused by above commit that considers identical local routes to be siblings. The division by zero happens because a nexthop weight is not set for local routes. Revert the commit as it does not fix a bug and has side effects. To reproduce: # ip -6 address add 2001:db8::1/64 dev dummy0 # ip -6 address add 2001:db8::1/64 dev dummy1 Fixes: edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== Fix two memory leaks in x86 JIT. For details, please see individual patches in this series. Thanks! ==================== Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
The JIT logic in jit_subprogs() is as follows: for all subprogs we allocate a bpf_prog_alloc(), populate it (prog->is_func = 1 here), and pass it to bpf_int_jit_compile(). If a failure occurred during JIT and prog->jited is not set, then we bail out from attempting to JIT the whole program, and punt to the interpreter instead. In case JITing went successful, we fixup BPF call offsets and do another pass to bpf_int_jit_compile() (extra_pass is true at that point) to complete JITing calls. Given that requires to pass JIT context around addrs and jit_data from x86 JIT are freed in the extra_pass in bpf_int_jit_compile() when calls are involved (if not, they can be freed immediately). However, if in the original pass, the JIT image didn't converge then we leak addrs and jit_data since image itself is NULL, the prog->is_func is set and extra_pass is false in that case, meaning both will become unreachable and are never cleaned up, therefore we need to free as well on !image. Only x64 JIT is affected. Fixes: 1c2a088a ("bpf: x64: add JIT support for multi-function programs") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
While reviewing x64 JIT code, I noticed that we leak the prior allocated JIT image in the case where proglen != oldproglen during the JIT passes. Prior to the commit e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler") we would just break out of the loop, and using the image as the JITed prog since it could only shrink in size anyway. After e0ee9c12, we would bail out to out_addrs label where we free addrs and jit_data but not the image coming from bpf_jit_binary_alloc(). Fixes: e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Ursula Braun authored
The smc_poll code tries to finish connect() if the socket is in state SMC_INIT and polling of the internal CLC-socket returns with EPOLLOUT. This makes sense for a select/poll call following a connect call, but not without preceding connect(). With this patch smc_poll starts connect logic only, if the CLC-socket is no longer in its initial state TCP_CLOSE. In addition, a poll error on the internal CLC-socket is always propagated to the SMC socket. With this patch the code path mentioned by syzbot https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396 is no longer possible. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Reported-by: syzbot+03faa2dc16b8b64be396@syzkaller.appspotmail.com Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ingo Molnar authored
Use disable_irq_nosync() instead of disable_irq() as this might be called in atomic context with netpoll. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp processes auth chunk first, then continues to the next chunk in this packet if chunk_end + chunk_hdr size < skb_tail_pointer(). Otherwise, it will go to the next packet or discard this chunk. However, it missed the fact that cookie-ack chunk's size is equal to chunk_hdr size, which couldn't match that check, and thus this chunk would not get processed. This patch fixes it by changing the check to chunk_end + chunk_hdr size <= skb_tail_pointer(). Fixes: 26b87c78 ("net: sctp: fix remote memory pressure from excessive queueing") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When processing a duplicate cookie-echo chunk, for case 'D', sctp will not process the param from this chunk. It means old asoc has nothing to be updated, and the new temp asoc doesn't have the complete info. So there's no reason to use the new asoc when creating the cookie-ack chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk can not be set with auth, and it will definitely be dropped by peer. This issue is there since very beginning, and we fix it by using the old asoc instead. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When processing a duplicate cookie-echo chunk, for case 'A' and 'B', after sctp_process_init for the new asoc, if auth is enabled for the cookie-ack chunk, the active key should also be initialized. Otherwise, the cookie-ack chunk made later can not be set with auth shkey properly, and a crash can even be caused by this, as after Commit 1b1e0bc9 ("sctp: add refcnt support for sh_key"), sctp needs to hold the shkey when making control chunks. Fixes: 1b1e0bc9 ("sctp: add refcnt support for sh_key") Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Previously the bbr->idle_restart tracking was zeroing out the bbr->idle_restart bit upon ACKs that did not SACK or ACK anything, e.g. receiving incoming data or receiver window updates. In such situations BBR would forget that this was a restart-from-idle situation, and if the min_rtt had expired it would unnecessarily enter PROBE_RTT (even though we were actually restarting from idle but had merely forgotten that fact). The fix is simple: we need to remember we are restarting from idle until we receive a S/ACK for some data (a S/ACK for the first flight of data we send as we are restarting). This commit is a stable candidate for kernels back as far as 4.9. Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
In dual_mac mode packets arrived on one port should not be forwarded by switch hw to another port. Only Linux Host can forward packets between ports. The below test case (reported in [1]) shows that packet arrived on one port can be leaked to anoter (reproducible with dual port evms): - connect port 1 (eth0) to linux Host 0 and run tcpdump or Wireshark - connect port 2 (eth1) to linux Host 1 with vlan 1 configured - ping <IPx> from Host 1 through vlan 1 interface. ARP packets will be seen on Host 0. Issue happens because dual_mac mode is implemnted using two vlans: 1 (Port 1+Port 0) and 2 (Port 2+Port 0), so there are vlan records created for for each vlan. By default, the ALE will find valid vlan record in its table when vlan 1 tagged packet arrived on Port 2 and so forwards packet to all ports which are vlan 1 members (like Port. To avoid such behaviorr the ALE VLAN ID Ingress Check need to be enabled for each external CPSW port (ALE_PORTCTLn.VID_INGRESS_CHECK) so ALE will drop ingress packets if Rx port is not VLAN member. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
This reverts commit 93c0d549c4c5a7382ad70de6b86610b7aae57406. Unfortunately the padding will break 32 bit userspace. Ouch. Need to add some compat code, revert for now. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 01 May, 2018 9 commits
-
-
John Hurley authored
Firmware requires that the ttl value for an encapsulating ipv4 tunnel header be included as an action field. Prior to the support of Geneve tunnel encap (when ttl set was removed completely), ttl value was extracted from the tunnel key. However, tests have shown that this can still produce a ttl of 0. Fix the issue by setting the namespace default value for each new tunnel. Follow up patch for net-next will do a full route lookup. Fixes: 3ca3059d ("nfp: flower: compile Geneve encap actions") Fixes: b27d6a95 ("nfp: compile flower vxlan tunnel set actions") Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dave Watson authored
It is reported that in some cases, write_space may be called in do_tcp_sendpages, such that we recursively invoke do_tcp_sendpages again: [ 660.468802] ? do_tcp_sendpages+0x8d/0x580 [ 660.468826] ? tls_push_sg+0x74/0x130 [tls] [ 660.468852] ? tls_push_record+0x24a/0x390 [tls] [ 660.468880] ? tls_write_space+0x6a/0x80 [tls] ... tls_push_sg already does a loop over all sending sg's, so ignore any tls_write_space notifications until we are done sending. We then have to call the previous write_space to wake up poll() waiters after we are done with the send loop. Reported-by:
Andre Tomt <andre@tomt.net> Signed-off-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Song Liu authored
1. remove useless parameter list to ./urandom_read 2. add missing "\n" to the end of an error message Fixes: 81f77fd0 ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Thomas Winter authored
It is valid to have static routes where the nexthop is an interface not an address such as tunnels. For IPv4 it was possible to use ECMP on these routes but not for IPv6. Signed-off-by:
Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Cc: David Ahern <dsahern@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wenwen Wang authored
In ethtool_get_rxnfc(), the object "info" is firstly copied from user-space. If the FLOW_RSS flag is set in the member field flow_type of "info" (and cmd is ETHTOOL_GRXFH), info needs to be copied again from user-space because FLOW_RSS is newer and has new definition, as mentioned in the comment. However, given that the user data resides in user-space, a malicious user can race to change the data after the first copy. By doing so, the user can inject inconsistent data. For example, in the second copy, the FLOW_RSS flag could be cleared in the field flow_type of "info". In the following execution, "info" will be used in the function ops->get_rxnfc(). Such inconsistent data can potentially lead to unexpected information leakage since ops->get_rxnfc() will prepare various types of data according to flow_type, and the prepared data will be eventually copied to user-space. This inconsistent data may also cause undefined behaviors based on how ops->get_rxnfc() is implemented. This patch simply re-verifies the flow_type field of "info" after the second copy. If the value is not as expected, an error code will be returned. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fix to spelling mistake in mlx4_warn message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
There's a 32 bit hole just after type. It's best to give it a name, this way compiler is forced to initialize it with rest of the structure. Reported-by:
Kevin Easton <kevin@guarana.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot is able to produce a nasty WARN_ON() in tcp_verify_left_out() with following C-repro : socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0 bind(3, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 sendto(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1242, MSG_FASTOPEN, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("127.0.0.1")}, 16) = 1242 setsockopt(3, SOL_TCP, TCP_REPAIR_WINDOW, "\4\0\0@+\205\0\0\377\377\0\0\377\377\377\177\0\0\0\0", 20) = 0 writev(3, [{"\270", 1}], 1) = 1 setsockopt(3, SOL_TCP, TCP_REPAIR_OPTIONS, "\10\0\0\0\0\0\0\0\0\0\0\0|\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 386) = 0 writev(3, [{"\210v\r[\226\320t\231qwQ\204\264l\254\t\1\20\245\214p\350H\223\254;\\\37\345\307p$"..., 3144}], 1) = 3144 The 3rd system call looks odd : setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0 This patch makes sure bound checking is using an unsigned compare. Fixes: ee995283 ("tcp: Initial repair mode") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot/KMSAN reported an uninit-value in ip6_multipath_l3_keys(), root caused to a bad assumption of ICMP header being already pulled in skb->head ip_multipath_l3_keys() does the correct thing, so it is an IPv6 only bug. BUG: KMSAN: uninit-value in ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] BUG: KMSAN: uninit-value in rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 CPU: 0 PID: 4507 Comm: syz-executor661 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 ip6_route_input+0x65a/0x920 net/ipv6/route.c:1884 ip6_rcv_finish+0x413/0x6e0 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0x1e16/0x2340 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 23aebdac ("ipv6: Compute multipath hash for ICMP errors from offending packet") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Jakub Sitnicki <jkbs@redhat.com> Acked-by:
Jakub Sitnicki <jkbs@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 30 Apr, 2018 5 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in tx_fw_stat_gstrings text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in DP_INFO message text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_warn warning message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
When we set a bond slave's master to bridge via ioctl, we only check the IFF_BRIDGE_PORT flag. Although we will find the slave's real master at netdev_master_upper_dev_link() later, it already does some settings and allocates some resources. It would be better to return as early as possible. v1 -> v2: use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev() to check if we have a master, because not all upper devs are masters, e.g. vlan device. Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 28 Apr, 2018 3 commits
-
-
David S. Miller authored
Edward Cree says: ==================== sfc: more ARFS fixes A couple more bits of breakage in my recent ARFS and async filters work. Patch #1 in particular fixes a bug that leads to memory trampling and consequent crashes. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Owing to a missing conditional, the result of rps_may_expire_flow() was being ignored and filters were being removed even if we'd decided not to expire them. Fixes: f8d62037 ("sfc: ARFS filter IDs") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
efx->type->filter_insert() returns an ID rather than the index that efx->type->filter_async_insert() used to, which causes it to exceed efx->type->max_rx_ip_filters on some EF10 configurations, leading to out- of-bounds array writes. So, in efx_filter_rfs_work(), convert this back into an index (which is what the remove call in the expiry path expects, anyway). Fixes: 3af0f342 ("sfc: replace asynchronous filter operations") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Apr, 2018 2 commits
-
-
Lance Richardson authored
For the x32 ABI, struct timeval has two 64-bit fields. However the kernel currently interprets the user-space values used for the SO_RCVTIMEO and SO_SNDTIMEO socket options as having a pair of 32-bit fields. When the seconds portion of the requested timeout is less than 2**32, the seconds portion of the effective timeout is correct but the microseconds portion is zero. When the seconds portion of the requested timeout is zero and the microseconds portion is non-zero, the kernel interprets the timeout as zero (never timeout). Fix by using 64-bit time for SO_RCVTIMEO/SO_SNDTIMEO as required for the ABI. The code included below demonstrates the problem. Results before patch: $ gcc -m64 -Wall -O2 -o socktmo socktmo.c && ./socktmo recv time: 2.008181 seconds send time: 2.015985 seconds $ gcc -m32 -Wall -O2 -o socktmo socktmo.c && ./socktmo recv time: 2.016763 seconds send time: 2.016062 seconds $ gcc -mx32 -Wall -O2 -o socktmo socktmo.c && ./socktmo recv time: 1.007239 seconds send time: 1.023890 seconds Results after patch: $ gcc -m64 -O2 -Wall -o socktmo socktmo.c && ./socktmo recv time: 2.010062 seconds send time: 2.015836 seconds $ gcc -m32 -O2 -Wall -o socktmo socktmo.c && ./socktmo recv time: 2.013974 seconds send time: 2.015981 seconds $ gcc -mx32 -O2 -Wall -o socktmo socktmo.c && ./socktmo recv time: 2.030257 seconds send time: 2.013383 seconds #include <stdio.h> #include <stdlib.h> #include <sys/socket.h> #include <sys/types.h> #include <sys/time.h> void checkrc(char *str, int rc) { if (rc >= 0) return; perror(str); exit(1); } static char buf[1024]; int main(int argc, char **argv) { int rc; int socks[2]; struct timeval tv; struct timeval start, end, delta; rc = socketpair(AF_UNIX, SOCK_STREAM, 0, socks); checkrc("socketpair", rc); /* set timeout to 1.999999 seconds */ tv.tv_sec = 1; tv.tv_usec = 999999; rc = setsockopt(socks[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof tv); rc = setsockopt(socks[0], SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof tv); checkrc("setsockopt", rc); /* measure actual receive timeout */ gettimeofday(&start, NULL); rc = recv(socks[0], buf, sizeof buf, 0); gettimeofday(&end, NULL); timersub(&end, &start, &delta); printf("recv time: %ld.%06ld seconds\n", (long)delta.tv_sec, (long)delta.tv_usec); /* fill send buffer */ do { rc = send(socks[0], buf, sizeof buf, 0); } while (rc > 0); /* measure actual send timeout */ gettimeofday(&start, NULL); rc = send(socks[0], buf, sizeof buf, 0); gettimeofday(&end, NULL); timersub(&end, &start, &delta); printf("send time: %ld.%06ld seconds\n", (long)delta.tv_sec, (long)delta.tv_usec); exit(0); } Fixes: 515c7af8 ("x32: Use compat shims for {g,s}etsockopt") Reported-by:
Gopal RajagopalSai <gopalsr83@gmail.com> Signed-off-by:
Lance Richardson <lance.richardson.net@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
"./scripts/get_maintainer.pl -f" does not actually show us David as the maintainer of drivers/net directories such as team, bonding, phy or dsa. Adding him in an M: entry of NETWORKING DRIVERS fixes this. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-