- 12 Jun, 2009 40 commits
-
-
Pekka Enberg authored
Fixes the following warning during bootup when compiling with CONFIG_SLAB: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at kernel/lockdep.c:2282 lockdep_trace_alloc+0x91/0xb9() [ 0.000000] Hardware name: [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30 #491 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81087d84>] ? lockdep_trace_alloc+0x91/0xb9 [ 0.000000] [<ffffffff81061764>] warn_slowpath_common+0x7c/0xa9 [ 0.000000] [<ffffffff810617a5>] warn_slowpath_null+0x14/0x16 [ 0.000000] [<ffffffff81087d84>] lockdep_trace_alloc+0x91/0xb9 [ 0.000000] [<ffffffff810f5b03>] kmem_cache_alloc_node_notrace+0x26/0xdf [ 0.000000] [<ffffffff81487f4e>] ? setup_cpu_cache+0x7e/0x210 [ 0.000000] [<ffffffff81487fe3>] setup_cpu_cache+0x113/0x210 [ 0.000000] [<ffffffff810f73ff>] kmem_cache_create+0x409/0x486 [ 0.000000] [<ffffffff818131c1>] kmem_cache_init+0x232/0x593 [ 0.000000] [<ffffffff8180987c>] ? mem_init+0x156/0x161 [ 0.000000] [<ffffffff817f8aae>] start_kernel+0x1cc/0x3b9 [ 0.000000] [<ffffffff817f829a>] x86_64_start_reservations+0xaa/0xae [ 0.000000] [<ffffffff817f837f>] x86_64_start_kernel+0xe1/0xe8 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- Signed-off-by:Pekka Enberg <penberg@cs.helsinki.fi>
-
Yinghai Lu authored
Only one cpu is there, just call __flush_tlb for it. Fixes the following boot warning on x86: [ 0.000000] Memory: 885032k/915540k available (5993k kernel code, 29844k reserved, 3842k data, 428k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffe17000 - 0xfffff000 (1952 kB) [ 0.000000] vmalloc : 0xf8615000 - 0xffe15000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7e15000 ( 894 MB) [ 0.000000] .init : 0xc19a5000 - 0xc1a10000 ( 428 kB) [ 0.000000] .data : 0xc15da4bb - 0xc199af6c (3842 kB) [ 0.000000] .text : 0xc1000000 - 0xc15da4bb (5993 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at kernel/smp.c:369 smp_call_function_many+0x50/0x1b0() [ 0.000000] Hardware name: System Product Name [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip #52504 [ 0.000000] Call Trace: [ 0.000000] [<c104aa16>] warn_slowpath_common+0x65/0x95 [ 0.000000] [<c104aa58>] warn_slowpath_null+0x12/0x15 [ 0.000000] [<c1073bbe>] smp_call_function_many+0x50/0x1b0 [ 0.000000] [<c1037615>] ? do_flush_tlb_all+0x0/0x41 [ 0.000000] [<c1037615>] ? do_flush_tlb_all+0x0/0x41 [ 0.000000] [<c1073d4f>] smp_call_function+0x31/0x58 [ 0.000000] [<c1037615>] ? do_flush_tlb_all+0x0/0x41 [ 0.000000] [<c104f635>] on_each_cpu+0x26/0x65 [ 0.000000] [<c10374b5>] flush_tlb_all+0x19/0x1b [ 0.000000] [<c1032ab3>] zap_low_mappings+0x4d/0x56 [ 0.000000] [<c15d64b5>] ? printk+0x14/0x17 [ 0.000000] [<c19b42a8>] mem_init+0x23d/0x245 [ 0.000000] [<c19a56a1>] start_kernel+0x17a/0x2d5 [ 0.000000] [<c19a5347>] ? unknown_bootoption+0x0/0x19a [ 0.000000] [<c19a5039>] __init_begin+0x39/0x41 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- Reported-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Yinghai Lu authored
Ingo had [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x2b/0x71() [ 0.000000] Hardware name: System Product Name [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 2.6.30-tip-03087-g0bb2618-dirty #52506 [ 0.000000] Call Trace: [ 0.000000] [<81032588>] warn_slowpath_common+0x60/0x90 [ 0.000000] [<810325c5>] warn_slowpath_null+0xd/0x10 [ 0.000000] [<819d1bc0>] alloc_arch_preferred_bootmem+0x2b/0x71 [ 0.000000] [<819d1c31>] ___alloc_bootmem_nopanic+0x2b/0x9a [ 0.000000] [<81050a0a>] ? lock_release+0xac/0xb2 [ 0.000000] [<819d1d4c>] ___alloc_bootmem+0xe/0x2d [ 0.000000] [<819d1e9f>] __alloc_bootmem+0xa/0xc [ 0.000000] [<819d7c63>] alloc_bootmem_cpumask_var+0x21/0x26 [ 0.000000] [<819d0cc8>] early_irq_init+0x15/0x10d [ 0.000000] [<819bb75a>] start_kernel+0x167/0x326 [ 0.000000] [<819bb06b>] __init_begin+0x6b/0x70 [ 0.000000] ---[ end trace 4eaa2a86a8e2da23 ]--- [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] CPU 0 irqstacks, hard=821e6000 soft=821e7000 we need to update init_irq_default_affinity Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Now, SLAB is configured in very early stage and it can be used in init routine now. But replacing alloc_bootmem() in FLAT/DISCONTIGMEM's page_cgroup() initialization breaks the allocation, now. (Works well in SPARSEMEM case...it supports MEMORY_HOTPLUG and size of page_cgroup is in reasonable size (< 1 << MAX_ORDER.) This patch revive FLATMEM+memory cgroup by using alloc_bootmem. In future, We stop to support FLATMEM (if no users) or rewrite codes for flatmem completely.But this will adds more messy codes and overheads. Reported-by:
Li Zefan <lizf@cn.fujitsu.com> Tested-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings in recently changed block/ source code. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (87 commits) nilfs2: get rid of bd_mount_sem use from nilfs nilfs2: correct exclusion control in nilfs_remount function nilfs2: simplify remaining sget() use nilfs2: get rid of sget use for checking if current mount is present nilfs2: get rid of sget use for acquiring nilfs object nilfs2: remove meaningless EBUSY case from nilfs_get_sb function remove the call to ->write_super in __sync_filesystem nilfs2: call nilfs2_write_super from nilfs2_sync_fs jffs2: call jffs2_write_super from jffs2_sync_fs ufs: add ->sync_fs sysv: add ->sync_fs hfsplus: add ->sync_fs hfs: add ->sync_fs fat: add ->sync_fs ext2: add ->sync_fs exofs: add ->sync_fs bfs: add ->sync_fs affs: add ->sync_fs sanitize ->fsync() for affs repair bfs_write_inode(), switch bfs to simple_fsync() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: remove unecessary include of thread_info.h in entry.S m68knommu: enumerate INIT_THREAD fields properly headers_check fix: m68k, swab.h arch/m68knommu: Convert #ifdef DEBUG printk(KERN_DEBUG to pr_debug( m68knommu: remove obsolete reset code m68knommu: move CPU reset code for the 5272 ColdFire into its platform code m68knommu: move CPU reset code for the 528x ColdFire into its platform code m68knommu: move CPU reset code for the 527x ColdFire into its platform code m68knommu: move CPU reset code for the 523x ColdFire into its platform code m68knommu: move CPU reset code for the 520x ColdFire into its platform code m68knommu: add CPU reset code for the 532x ColdFire m68knommu: add CPU reset code for the 5249 ColdFire m68knommu: add CPU reset code for the 5206e ColdFire m68knommu: add CPU reset code for the 5206 ColdFire m68knommu: add CPU reset code for the 5407 ColdFire m68knommu: add CPU reset code for the 5307 ColdFire m68knommu: merge system reset for code ColdFire 523x family m68knommu: fix system reset for ColdFire 527x family
-
Yinghai Lu authored
zalloc_cpumask_var already cleared it. Signed-off-by:
-
Yinghai Lu authored
So we make sure MAXSMP gets a cleared cpumask Signed-off-by:
-
Stephen Rothwell authored
Commit 925d519a ("perf_counter: unify and fix delayed counter wakeup") added global definitions. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Ryusuke Konishi authored
This will remove every bd_mount_sem use in nilfs. The intended exclusion control was replaced by the previous patch ("nilfs2: correct exclusion control in nilfs_remount function") for nilfs_remount(), and this patch will replace remains with a new mutex that this inserts in nilfs object. Signed-off-by:Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Ryusuke Konishi authored
nilfs_remount() changes mount state of a superblock instance. Even though nilfs accesses other superblock instances during mount or remount, the mount state was not properly protected in nilfs_remount(). Moreover, nilfs_remount() has a lock order reversal problem; nilfs_get_sb() holds: 1. bdev->bd_mount_sem 2. sb->s_umount (sget acquires) and nilfs_remount() holds: 1. sb->s_umount (locked by the caller in vfs) 2. bdev->bd_mount_sem To avoid these problems, this patch divides a semaphore protecting super block instances from nilfs->ns_sem, and applies it to the mount state protection in nilfs_remount(). With this change, bd_mount_sem use is removed from nilfs_remount() and the lock order reversal will be resolved. And the new rw-semaphore, nilfs->ns_super_sem will properly protect the mount state except the modification from nilfs_error function. Signed-off-by:
-
Ryusuke Konishi authored
This simplifies the test function passed on the remaining sget() callsite in nilfs. Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount) in the test function passed to sget(), this patch first looks up the nilfs_sb_info struct which the given mount type matches, and then acquires the super block instance holding the nilfs_sb_info. Signed-off-by:
-
Ryusuke Konishi authored
This stops using sget() for checking if an r/w-mount or an r/o-mount exists on the device. This elimination uses a back pointer to the current mount added to nilfs object. Signed-off-by:
-
Ryusuke Konishi authored
This will change the way to obtain nilfs object in nilfs_get_sb() function. Previously, a preliminary sget() call was performed, and the nilfs object was acquired from a super block instance found by the sget() call. This patch, instead, instroduces a new dedicated function find_or_create_nilfs(); as the name implies, the function finds an existent nilfs object from a global list or creates a new one if no object is found on the device. Signed-off-by:
-
Ryusuke Konishi authored
The following EBUSY case in nilfs_get_sb() is meaningless. Indeed, this error code is never returned to the caller. if (!s->s_root) { ... } else if (!(s->s_flags & MS_RDONLY)) { err = -EBUSY; } This simply removes the else case. Signed-off-by: -
Christoph Hellwig authored
Now that all filesystems provide ->sync_fs methods we can change __sync_filesystem to only call ->sync_fs. This gives us a clear separation between periodic writeouts which are driven by ->write_super and data integrity syncs that go through ->sync_fs. (modulo file_fsync which is also going away) Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
The call to ->write_super from __sync_filesystem will go away, so make sure nilfs2 performs the same actions from inside ->sync_fs. Signed-off-by:
-
Christoph Hellwig authored
The call to ->write_super from __sync_filesystem will go away, so make sure jffs2 performs the same actions from inside ->sync_fs. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by:
-
Christoph Hellwig authored
Add a ->sync_fs method for data integrity syncs. Factor out common code between affs_put_super, affs_write_super and the new affs_sync_fs into a helper. Signed-off-by:
-
Al Viro authored
unfortunately, for affs (especially for affs directories) we have no real way to keep track of metadata ownership. So we have to do more or less what file_fsync() does, but we do *not* need to call write_super() there. Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Missing conversion to host-endian before doing shifts Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
* get minix_write_inode() to honour the second argument * now we can use simple_fsync() for minixfs Signed-off-by: -
Al Viro authored
kill ext2_sync_file() (along with ext2/fsync.c), get rid of ext2_update_inode() - it's an alias of ext2_write_inode(). Signed-off-by: -
Al Viro authored
* mark directory data blocks as assoc. metadata * add new inode to deal with FAT, mark FAT blocks as assoc. metadata of that * now ->fsync() is trivial both for files and directories Signed-off-by: -
Al Viro authored
fs-internal parts of qnx4_fs.h taken to fs/qnx4/qnx4.h, includes adjusted, qnx4_fs.h doesn't need unifdef anymore. Signed-off-by:
-
