1. 18 May, 2012 2 commits
    • Cyrill Gorcunov's avatar
      fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entries · eb94cd96
      Cyrill Gorcunov authored
      map_files/ entries are never supposed to be executed, still curious
      minds might try to run them, which leads to the following deadlock
      
        ======================================================
        [ INFO: possible circular locking dependency detected ]
        3.4.0-rc4-24406-g841e6a6 #121 Not tainted
        -------------------------------------------------------
        bash/1556 is trying to acquire lock:
         (&sb->s_type->i_mutex_key#8){+.+.+.}, at: do_lookup+0x267/0x2b1
      
        but task is already holding lock:
         (&sig->cred_guard_mutex){+.+.+.}, at: prepare_bprm_creds+0x2d/0x69
      
        which lock already depends on the new lock.
      
        the existing dependency chain (in reverse order) is:
      
        -> #1 (&sig->cred_guard_mutex){+.+.+.}:
               validate_chain+0x444/0x4f4
               __lock_acquire+0x387/0x3f8
               lock_acquire+0x12b/0x158
               __mutex_lock_common+0x56/0x3a9
               mutex_lock_killable_nested+0x40/0x45
               lock_trace+0x24/0x59
               proc_map_files_lookup+0x5a/0x165
               __lookup_hash+0x52/0x73
               do_lookup+0x276/0x2b1
               walk_component+0x3d/0x114
               do_last+0xfc/0x540
               path_openat+0xd3/0x306
               do_filp_open+0x3d/0x89
               do_sys_open+0x74/0x106
               sys_open+0x21/0x23
               tracesys+0xdd/0xe2
      
        -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}:
               check_prev_add+0x6a/0x1ef
               validate_chain+0x444/0x4f4
               __lock_acquire+0x387/0x3f8
               lock_acquire+0x12b/0x158
               __mutex_lock_common+0x56/0x3a9
               mutex_lock_nested+0x40/0x45
               do_lookup+0x267/0x2b1
               walk_component+0x3d/0x114
               link_path_walk+0x1f9/0x48f
               path_openat+0xb6/0x306
               do_filp_open+0x3d/0x89
               open_exec+0x25/0xa0
               do_execve_common+0xea/0x2f9
               do_execve+0x43/0x45
               sys_execve+0x43/0x5a
               stub_execve+0x6c/0xc0
      
      This is because prepare_bprm_creds grabs task->signal->cred_guard_mutex
      and when do_lookup happens we try to grab task->signal->cred_guard_mutex
      again in lock_trace.
      
      Fix it using plain ptrace_may_access() helper in proc_map_files_lookup()
      and in proc_map_files_readdir() instead of lock_trace(), the caller must
      be CAP_SYS_ADMIN granted anyway.
      Signed-off-by: default avatarCyrill Gorcunov <gorcunov@openvz.org>
      Reported-by: default avatarSasha Levin <levinsasha928@gmail.com>
      Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
      Cc: Pavel Emelyanov <xemul@openvz.org>
      Cc: Dave Jones <davej@redhat.com>
      Cc: Vasiliy Kulikov <segoon@openwall.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      eb94cd96
    • Rajkumar Kasirajan's avatar
      drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01 · c0a5f4a0
      Rajkumar Kasirajan authored
      The reset date of the ST Micro version of PL031 is 2000-01-01.  The
      correct weekday for 2000-01-01 is saturday, but pl031 is initialized to
      sunday.  This may lead to alarm malfunction, so configure the correct
      wday if RTC_DR indicates reset.
      Signed-off-by: default avatarRajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Cc: Mattias Wallin <mattias.wallin@stericsson.com>
      Cc: Alessandro Zummo <a.zummo@towertech.it>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c0a5f4a0
  2. 17 May, 2012 11 commits
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma · 1be5f0b7
      Linus Torvalds authored
      Pull slave-dmaengine fixes fromVinod Koul:
       "fixes of cylic dma usages in slave dma drivers"
      
      * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
        dmaengine: fix cyclic dma usage
        dmaengine: pl330: dont complete descriptor for cyclic dma
      1be5f0b7
    • Linus Torvalds's avatar
      Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost · 42e8b9c0
      Linus Torvalds authored
      Pull last minute virtio fixes from Michael S. Tsirkin:
       "Here are a couple of last minute virtio fixes for 3.4.  Hope it's not
        too late yes - I might have tried too hard to make sure the fix is
        well tested.
      
        Fixes are by Amit and myself.  One fixes module removal and one
        suspend of a VM, the last one the handling of out of memory condition.
      
        They are thus very low risk as most people never hit these paths, but
        do fix very annoying problems for people that do use the feature.
      
        Signed-off-by: Michael S. Tsirkin <mst@redhat.com>"
      
      * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
        virtio_net: invoke softirqs after __napi_schedule
        virtio: balloon: let host know of updated balloon size before module removal
        virtio: console: tell host of open ports after resume from s3/s4
      42e8b9c0
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 674ff517
      Linus Torvalds authored
      Pull ARM: SoC fixes from Olof Johansson:
       "I will stop trying to predict when we're done with fixes for a
        release.
      
        Here's another small batch of three patches for arm-soc:
      
         - A fix for a boot time WARN_ON() due to irq domain conversion on
           PRIMA2
         - Fix for a regression in Tegra SMP spinup code due to swapped
           register offsets
         - Fixed config dependency for mv_cesa crypto driver to avoid build
           breakage"
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller
        crypto: mv_cesa requires on CRYPTO_HASH to build
        ARM: tegra: Fix flow controller accesses
      674ff517
    • Linus Torvalds's avatar
      Merge tag 'md-3.4-fixes' of git://neil.brown.name/md · 36a1987c
      Linus Torvalds authored
      Pull two md fixes from NeilBrown:
       "One fixes a bug in the new raid10 resize code so is relevant to 3.4
        only.
      
        The other fixes a bug in the use of md by dm-raid, so is relevant to
        any kernel with dm-raid support"
      
      * tag 'md-3.4-fixes' of git://neil.brown.name/md:
        MD: Add del_timer_sync to mddev_suspend (fix nasty panic)
        md/raid10: set dev_sectors properly when resizing devices in array.
      36a1987c
    • Linus Torvalds's avatar
      Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and... · 31ae9835
      Linus Torvalds authored
      Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
      
      Pull perf, x86 and scheduler updates from Ingo Molnar.
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        tracing: Do not enable function event with enable
        perf stat: handle ENXIO error for perf_event_open
        perf: Turn off compiler warnings for flex and bison generated files
        perf stat: Fix case where guest/host monitoring is not supported by kernel
        perf build-id: Fix filename size calculation
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable
        x86: Fix section annotation of acpi_map_cpu2node()
        x86/microcode: Ensure that module is only loaded on supported Intel CPUs
      
      * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption
      31ae9835
    • Michael S. Tsirkin's avatar
      virtio_net: invoke softirqs after __napi_schedule · ec13ee80
      Michael S. Tsirkin authored
      __napi_schedule might raise softirq but nothing
      causes do_softirq to trigger, so it does not in fact
      run. As a result,
      the error message "NOHZ: local_softirq_pending 08"
      sometimes occurs during boot of a KVM guest when the network service is
      started and we are oom:
      
        ...
        Bringing up loopback interface:  [  OK  ]
        Bringing up interface eth0:
        Determining IP information for eth0...NOHZ: local_softirq_pending 08
         done.
        [  OK  ]
        ...
      
      Further, receive queue processing might get delayed
      indefinitely until some interrupt triggers:
      virtio_net expected napi to be run immediately.
      
      One way to cause do_softirq to be executed is by
      invoking local_bh_enable(). As __napi_schedule is
      normally called from bh or irq context, this
      seems to make sense: disable bh before __napi_schedule
      and enable afterwards.
      
      In fact it's a very complicated way of calling do_softirq(),
      and works since this function is only used when we are not
      in interrupt context.  It's not hot at all, in any ideal scenario.
      Reported-by: default avatarUlrich Obergfell <uobergfe@redhat.com>
      Tested-by: default avatarUlrich Obergfell <uobergfe@redhat.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Acked-by: default avatarRusty Russell <rusty@rustcorp.com.au>
      ec13ee80
    • Amit Shah's avatar
      virtio: balloon: let host know of updated balloon size before module removal · b8ae0eb3
      Amit Shah authored
      When the balloon module is removed, we deflate the balloon, reclaiming
      all the pages that were given to the host.  However, we don't update the
      config values for the new balloon size, resulting in the host showing
      outdated balloon values.
      
      The size update is done after each leak and fill operation, only the
      module removal case was left out.
      Signed-off-by: default avatarAmit Shah <amit.shah@redhat.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      b8ae0eb3
    • Amit Shah's avatar
      virtio: console: tell host of open ports after resume from s3/s4 · fa8b66cc
      Amit Shah authored
      If a port was open before going into one of the sleep states, the port
      can continue normal operation after restore.  However, the host has to
      be told that the guest side of the connection is open to restore
      pre-suspend state.
      
      This wasn't noticed so far due to a bug in qemu that was fixed recently
      (which marked the guest-side connection as always open).
      
      CC: stable@vger.kernel.org   # Only for 3.3
      Signed-off-by: default avatarAmit Shah <amit.shah@redhat.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      fa8b66cc
    • Barry Song's avatar
      ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller · ad3b8a83
      Barry Song authored
      the old codes will cause 3.4 kernel warning as irq domain size is wrong:
      ------------[ cut here ]------------
      WARNING: at kernel/irq/irqdomain.c:74 irq_domain_legacy_revmap+0x24/0x48()
      Modules linked in:
      [<c0013f50>] (unwind_backtrace+0x0/0xf8) from [<c001e7d8>] (warn_slowpath_common+0x54/0x64)
      [<c001e7d8>] (warn_slowpath_common+0x54/0x64) from [<c001e804>] (warn_slowpath_null+0x1c/0x24)
      [<c001e804>] (warn_slowpath_null+0x1c/0x24) from [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48)
      [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) from [<c005c704>] (irq_create_mapping+0x20/0x120)
      [<c005c704>] (irq_create_mapping+0x20/0x120) from [<c005c880>] (irq_create_of_mapping+0x7c/0xf0)
      [<c005c880>] (irq_create_of_mapping+0x7c/0xf0) from [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34)
      [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) from [<c01a6c68>] (of_irq_to_resource+0x18/0x74)
      [<c01a6c68>] (of_irq_to_resource+0x18/0x74) from [<c01a6ce8>] (of_irq_count+0x24/0x34)
      [<c01a6ce8>] (of_irq_count+0x24/0x34) from [<c01a7220>] (of_device_alloc+0x58/0x158)
      [<c01a7220>] (of_device_alloc+0x58/0x158) from [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80)
      [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) from [<c01a7468>] (of_platform_bus_create+0xc8/0x190)
      [<c01a7468>] (of_platform_bus_create+0xc8/0x190) from [<c01a74cc>] (of_platform_bus_create+0x12c/0x190)
      ---[ end trace 1b75b31a2719ed32 ]---
      Signed-off-by: default avatarBarry Song <Baohua.Song@csr.com>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      ad3b8a83
    • Jonathan Brassow's avatar
      MD: Add del_timer_sync to mddev_suspend (fix nasty panic) · 0d9f4f13
      Jonathan Brassow authored
      Use del_timer_sync to remove timer before mddev_suspend finishes.
      
      We don't want a timer going off after an mddev_suspend is called.  This is
      especially true with device-mapper, since it can call the destructor function
      immediately following a suspend.  This results in the removal (kfree) of the
      structures upon which the timer depends - resulting in a very ugly panic.
      Therefore, we add a del_timer_sync to mddev_suspend to prevent this.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      0d9f4f13
    • NeilBrown's avatar
      md/raid10: set dev_sectors properly when resizing devices in array. · 6508fdbf
      NeilBrown authored
      raid10 stores dev_sectors in 'conf' separately from the one in
      'mddev' because it can have a very significant effect on block
      addressing and so need to be updated carefully.
      
      However raid10_resize isn't updating it at all!
      
      To update it correctly, we need to make sure it is a proper
      multiple of the chunksize taking various details of the layout
      in to account.
      This calculation is currently done in setup_conf.   So split it
      out from there and call it from raid10_resize as well.
      Then set conf->dev_sectors properly.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      6508fdbf
  3. 16 May, 2012 21 commits
  4. 15 May, 2012 6 commits