- 13 Mar, 2005 40 commits
-
-
Domen Puncer authored
convert from pci_module_init to pci_register_driver Signed-off-by:
Christophe Lucas <c.lucas@ifrance.com> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Domen Puncer authored
Remove nowhere referenced file. (egrep "filename\." didn't find anything) Signed-off-by:
-
Domen Puncer authored
Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
Maximilian Attems <janitor@sternwelten.at> Signed-off-by:
-
Domen Puncer authored
Inserts a set_current_state(TASK_INTERRUPTIBLE) before the schedule_timeout() call. Without this change, after the first iteration of the loop, schedule_timeout() will not only return immediately, but the loop will break, as the conditional will no longer be satisfied. In fact, this conditional makes little sense given the workings of schedule_timeout. The timeout variable is ignored, as well, and I'm fairly certain that it should be included in the loop conditional. That way, if the timeout expires before a signal hits, -ETIME will be returned by fdc_interrupt_wait() instead of -EINTR. Signed-off-by:
-
Domen Puncer authored
Use msleep() instead of schedule_timeout() to guarantee the task delays as expected. The current code uses TASK_INTERRUPTIBLE, but does not care about signals, so I believe msleep() should be ok. Signed-off-by:
Mikael Starvik <starvik@axis.com> Signed-off-by:
-
Domen Puncer authored
Use msleep_interruptible() instead of schedule_timeout() to guarantee consistent timing regardless of HZ value. schedule_timeout(1) will vary between 10 and 1 milliseconds, depending on the value of HZ (100 or 1000 respectively). For consistent behavior, msleep_interruptible() should be used. Signed-off-by:
-
Nishanth Aravamudan authored
Use wait_event_timeout() in place of custom wait-queue code. The code is not changed in any way (I don't think), but is cleaned up quite a bit (will get expanded to almost identical code). Signed-off-by:
-
Domen Puncer authored
Reorder add_wait_queue() and set_current_state() as a signal could be lost in between the two functions. Signed-off-by:
-
Domen Puncer authored
Replaces strtok() with strsep() Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
Domen Puncer authored
Unify the spinlock initialization as far as possible. Signed-off-by:
Amit Gud <gud@eth.net> Signed-off-by:
-
Domen Puncer authored
Remove the `sf16fm=' kernel boot parameter. Users must switch to `radio-sf16fmi.io=' Signed-off-by:
Marcel Sebek <sebek64@post.cz> Signed-off-by:
-
Domen Puncer authored
Use ssleep() instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by:
-
Domen Puncer authored
gus_wave.c vfree() checking cleanups. Signed-off by: James Lamanna <jlamanna@gmail.com> Signed-off-by:
-
Domen Puncer authored
Make code more readable with list_for_each_entry* Signed-off-by:
-
Adrian Bunk authored
I haven't found any possible modular usage of pcibios_penalize_isa_irq in the kernel. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
I haven't found any possible modular usage of dmi_get_system_info in the kernel. Signed-off-by:
-
Randy Dunlap authored
Make hweight() macros return unsigned int for 8,16,32 bits, instead of requiring callers to do that. drivers/input/joystick/analog.c:414: warning: int format, different type arg (arg 3) drivers/input/joystick/analog.c:414: warning: int format, different type arg (arg 4) drivers/input/joystick/analog.c:418: warning: int format, different type arg (arg 4) Note: does not address parisc, s390, or sparc64... waiting for comments. Signed-off-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
-
Randy Dunlap authored
zoran: fix printk format types: drivers/media/video/zoran_driver.c:3763: warning: long long unsigned int format, long unsigned int arg (arg 3) drivers/media/video/zoran_driver.c:3775: warning: long long unsigned int format, long unsigned int arg (arg 3) drivers/media/video/zoran_driver.c:4109: warning: long long unsigned int format, long unsigned int arg (arg 3) Signed-off-by:
-
Randy Dunlap authored
Use 'unsigned long long' for __u64 printk: drivers/w1/w1.c:415: warning: long long unsigned int format, __u64 arg (arg 6) Signed-off-by:
-
Randy Dunlap authored
Fix gcc warning: drivers/isdn/i4l/isdn_ppp.c:1581: warning: large integer implicitly truncated to unsigned type <seq> is unsigned int. Signed-off-by:
-
Randy Dunlap authored
On sparc32 build, there is a printk format arg-type warning: fs/proc/proc_misc.c:195: warning: long unsigned int format, unsigned int arg (arg 23) I tried to fix it with a change to asm-sparc/vaddrs.h: -#define VMALLOC_START 0xfe600000 +#define VMALLOC_START 0xfe600000UL -#define VMALLOC_END 0xffc00000 +#define VMALLOC_END 0xffc00000UL but that won't fly because the #defines are used in asm code and asm doesn't like the UL suffixes (reported by Bill Irwin). Signed-off-by:
-
Telemaque Ndizihiwe authored
Remove an unused label (fixes compiler WARNING) and a function (inside a preprocessor directive) that is never called. Signed-off- by: Telemaque Ndizihiwe <telendiz@eircom.net> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make needlessly gloval code static - vt_ioctl.c: removed the global variable keyboard_type since noone did actually set it to any other value Signed-off-by: -
Adrian Bunk authored
sysrq_power_off was completely unused. Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make some needlessly global code static - remove the unused global function specialix_setup Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make the needlessly global function smapi_request static - #if 0 the currently unused function SmapiQuerySystemID Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make two needlessly global structs static - remove the unused global function SDS_PORT8_DTR Alan already ACK'ed this patch. Signed-off-by:
-
Adrian Bunk authored
I haven't found any possible modular usage of mmu_cr4_features in the kernel. Signed-off-by:
-
Adrian Bunk authored
The patch below contains the following cleanups: - make some needlessly global code static - #if 0 the following unused global functions: - scx200_gpio_dump - remove the following unneeded EXPORT_SYMBOL's: - scx200_gpio_lock - scx200_gpio_dump Signed-off-by:
Henrik Brix Andersen <brix@gentoo.org> Signed-off-by:
-
Brian Gerst authored
- Make sprintf call vsnprintf directly - use INT_MAX for sprintf and vsprintf Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Signed-off-by:
-
Adrian Bunk authored
Andries Brouwer proposed this patch with the following comment: As observed earlier, ps2esdi was broken as a module, and the passing of geometry boot parameters is broken. But does it still work with kernels 2.3 or later? I think it does, but failed to verify that. I found an IBM PS/2 model 70-A21 with 8 MB and 120 MB ESDI disk. Tried a few distribution boot floppies to see whether they would boot. Slackware has special ibmmca bootdisks. SW 3.3 - Linux 2.1.43 - boots fine SW 4.0 - Linux 2.2.6 - hangs SW 7.0 - Linux 2.2.13 - boots fine SW 8.1 - Linux 2.4.18 - boots, but every single command is killed by OOM SW 10.0 - Linux 2.4.26 - kernel panic: no 386 supported Then Debian: Woody - Linux 2.2.10 - boots fine, but the rootdisk hangs Sarge - Linux 2.4.27 - does not recognize the ESDI disk, and the rootdisk crashes by OOM. So, good luck with 2.1 and 2.2 kernels, only failures with later kernels. What about other people? The two major Linux/MCA sites were http://glycerine.itsmm.uni.edu/mca (also referenced in Documentation/mca.txt) but it doesnt exist any longer, and http://www.dgmicro.com/mca/, which still exists ("last update: Jan 28 1999"), but the binaries it refers to live on ftp.dgmicro.com, which isn't there anymore. Concerning the speed: I measured this ESDI disk under Linux as transferring 50 kB/s, that is 4% of the speed the IBM specs claim. Also other Linux users complained that the disk is much faster under DOS. My proposal for this patch would be to get it into one 2.6 kernel (is it too late for 2.6.11?) and wait if anyone was still using it and screams, and remove it a few months later otherwise. Signed-off-by:
-
Olaf Hering authored
small nitpick, __KERNEL__ is the inner ifdef. Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Bjorn Helgaas authored
Remove unused get_resource_list() declaration. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make some needlesly global code static - cciss_scsi.c: remove the unused global function cciss_scsi_info - cciss.c: - init_cciss_module -> cciss_init - cleanup_cciss_module -> cciss_cleanup Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make some needlessly global functions static - remove the following unused global functions: - compr.c: jffs2_set_compression_mode - compr.c: jffs2_get_compression_mode Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make some needlessly global code static - #if 0 the following unused functions: - intrep.c: jffs_print_file - jffs_fm.c: jffs_print_node_ref Signed-off-by:
-
Olaf Hering authored
Roland added this include with his 'waitid system call' patch, which was removed again after a while. Just the header inclusion was not removed. http://linux.bkbits.net:8080/linux-2.5/cset@4134b6dd1rY3qnaq7YABrXPXGvzzpw http://linux.bkbits.net:8080/linux-2.5/cset@41499f66EDHON_8B1FYGEzLZQ2u13QSigned-off-by:
-
Adrian Bunk authored
The patch below does the following cleanups in each if the five changed C files: - #ifndef MODULE: remove unused setup function - make a needlessly global struct static - pf.c: pf_init_units can be static and __init After this cleanup, setup.h is completely unused and therefore removed. Signed-off-by:
-
Adrian Bunk authored
This patch removes kernel 2.2 code from pm3fb.{c,h}. It also removes KERNEL_2_4 and KERNEL_2_5 since all places where this was used had a #if (defined KERNEL_2_4) || (defined KERNEL_2_5) (Yes, I know the driver is marked as BROKEN.) Signed-off-by: -
Heiko Carstens authored
panic() doesn't flush the filesystem cache anymore. The comment above the function still claims it does. Signed-off-by:
-
