- 26 Oct, 2011 1 commit
-
-
Hamo authored
Should call the platform-specific __gpio_{get,set}_value instead of generic gpio_{get,set}_value Signed-off-by:Yang Bai <hamo.by@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca>
-
- 24 Oct, 2011 2 commits
-
-
Mark Brown authored
Currently struct gpio is only defined when using gpiolib which makes the stub gpio_request_array() much less useful in drivers than is ideal as they can't work with struct gpio. Since there are no other definitions in kernel instead make the define always available no matter if gpiolib is selectable or selected, ensuring that drivers can always use the type. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
Some functions of irq generic-chip is undefined, because EXPORT_SYMBOL_GPL is not set to these. ERROR: "irq_setup_generic_chip" [drivers/gpio/gpio-pch.ko] undefined! ERROR: "irq_alloc_generic_chip" [drivers/gpio/gpio-pch.ko] undefined! ERROR: "irq_setup_generic_chip" [drivers/gpio/gpio-ml-ioh.ko] undefined! ERROR: "irq_alloc_generic_chip" [drivers/gpio/gpio-ml-ioh.ko] undefined! This is revised that EXPORT_SYMBOL_GPL can be added and referred to in functions. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 20 Oct, 2011 2 commits
-
-
Tomoya MORINAGA authored
Currently, GFP_KERNEL is used as parameter of irq_alloc_descs like below. irq_base = irq_alloc_descs(-1, IOH_IRQ_BASE, num_ports[j], GFP_KERNEL); This is not true. So, this patch uses NUMA_NO_NODE not GFP_KERNEL. Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by:
-
Tomoya MORINAGA authored
Currently, GFP_KERNEL is used as parameter of irq_alloc_descs like below. irq_base = irq_alloc_descs(-1, IOH_IRQ_BASE, num_ports[j], GFP_KERNEL); This is not true. So, this patch uses NUMA_NO_NODE not GFP_KERNEL. Reported-by:
-
- 06 Oct, 2011 1 commit
-
-
Adrian Hunter authored
Alternate function must be zero for the pin to act as a GPIO. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
- 05 Oct, 2011 9 commits
-
-
Tomoya MORINAGA authored
Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
-
Tomoya MORINAGA authored
Currently, when suspend is occurred, register im0/1 and gpio_use_sel are not saved. This patch modifies so that register im0/1 and gpio_use_sel are saved. Signed-off-by:
-
Tomoya MORINAGA authored
Currently, the number of GPIO pins is set fixed value(=12). Also PIN MASK is set as '0xfff'. However the pins differs by IOH. This patch sets the value correctly. Signed-off-by:
-
Tomoya MORINAGA authored
Signed-off-by:
-
Tomoya MORINAGA authored
Signed-off-by:
-
Tomoya MORINAGA authored
Signed-off-by:
-
Tomoya MORINAGA authored
Currently, some registers are not saved in case changing to suspend state. This patch fixes the issue. Signed-off-by:
-
Tomoya MORINAGA authored
Signed-off-by:
-
Tomoya MORINAGA authored
This register restore processing is unnecessary in suspend processing. (The restore processing is already in resume processing) Signed-off-by:
-
- 21 Sep, 2011 1 commit
-
-
Shawn Guo authored
The mx3_gpio_irq_handler() is also called on imx6q which has GIC as the primary interrupt controller. As GIC implements the fasteoi flow control, we need to add chained_irq_enter/exit() to mx3_gpio_irq_handler() for signaling EOI, otherwise system will hang whenever there is a gpio irq triggered. v2: use chained_irq_{enter,exit}() Signed-off-by:Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
- 20 Sep, 2011 2 commits
-
-
Linus Walleij authored
Currently the Nomadik GPIO driver tracks enabled/disabled interrupt status with a local variable, switch to using the interrupt core. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Rabin Vincent authored
The GPIO clock is required for register access and interrupt detection. When interrupt detection is not required on any of the pin in a block, the block's clock can be disabled when the registers are not being accessed. Signed-off-by:
Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by:
Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by:
Jonas Aberg <jonas.aberg@stericsson.com> [Adjust for new IRQ chip core code, use only local functions] Signed-off-by:
-
- 12 Sep, 2011 9 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Remove duplicate "return" statement drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
-
git://git.linaro.org/people/arnd/arm-socLinus Torvalds authored
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
-
Mathieu Desnoyers authored
The LTTng 2.0 kernel tracer (stand-alone module package, available at http://lttng.org) uses the 0xF6 ioctl range for tracer control and transport operations. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/chrismason/linuxLinus Torvalds authored
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
-
Miklos Szeredi authored
kmemleak is reporting that 32 bytes are being leaked by FUSE: unreferenced object 0xe373b270 (size 32): comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<b05517d7>] kmemleak_alloc+0x27/0x50 [<b0196435>] kmem_cache_alloc+0xc5/0x180 [<b02455be>] fuse_alloc_forget+0x1e/0x20 [<b0245670>] fuse_alloc_inode+0xb0/0xd0 [<b01b1a8c>] alloc_inode+0x1c/0x80 [<b01b290f>] iget5_locked+0x8f/0x1a0 [<b0246022>] fuse_iget+0x72/0x1a0 [<b02461da>] fuse_get_root_inode+0x8a/0x90 [<b02465cf>] fuse_fill_super+0x3ef/0x590 [<b019e56f>] mount_nodev+0x3f/0x90 [<b0244e95>] fuse_mount+0x15/0x20 [<b019d1bc>] mount_fs+0x1c/0xc0 [<b01b5811>] vfs_kern_mount+0x41/0x90 [<b01b5af9>] do_kern_mount+0x39/0xd0 [<b01b7585>] do_mount+0x2e5/0x660 [<b01b7966>] sys_mount+0x66/0xa0 This leak report is consistent and happens once per boot on 3.1.0-rc5-dirty. This happens if a FORGET request is queued after the fuse device was released. Reported-by:Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Tested-by:
-
Miklos Szeredi authored
Commit 37fb3a30 ("fuse: fix flock") added in 3.1-rc4 caused flock() to fail with ENOSYS with the kernel ABI version 7.16 or earlier. Fix by falling back to testing FUSE_POSIX_LOCKS for ABI versions 7.16 and earlier. Reported-by:
Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by:
-
-
Arnd Bergmann authored
-
- 11 Sep, 2011 13 commits
-
-
git://linuxtv.org/mchehab/for_linusLinus Torvalds authored
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] vp7045: fix buffer setup [media] nuvoton-cir: simplify raw IR sample handling [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL [media] v4l2: Fix documentation of the codec device controls [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240 [media] gspca - sonixj: Fix wrong register mask for sensor om6802 [media] gspca - ov519: Fix LED inversion of some ov519 webcams [media] pwc: precedence bug in pwc_init_controls()
-
git://openrisc.net/~jonas/linuxLinus Torvalds authored
* 'for-linus' of git://openrisc.net/~jonas/linux: Add missing DMA ops openrisc: don't use pt_regs in struct sigcontext
-
Li Zefan authored
You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
num_bytes should be 4096 not 12288. Signed-off-by:
-
David Sterba authored
An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Miao Xie authored
If we write some data into the data hole of the file(no preallocation for this hole), Btrfs will allocate some disk space, and update nbytes of the inode, but the other element--disk_i_size needn't be updated. At this condition, we must update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size() return 1). # mkfs.btrfs /dev/sdb1 # mount /dev/sdb1 /mnt # touch /mnt/a # truncate -s 856002 /mnt/a # dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc # umount /mnt # btrfsck /dev/sdb1 root 5 inode 257 errors 400 found 32768 bytes used err is 1 Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Miao Xie authored
When we write some data to the place that is beyond the end of the file in direct I/O mode, a data hole will be created. And Btrfs should insert a file extent item that point to this hole into the fs tree. But unfortunately Btrfs forgets doing it. The following is a simple way to reproduce it: # mkfs.btrfs /dev/sdc2 # mount /dev/sdc2 /test4 # touch /test4/a # dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc # umount /test4 # btrfsck /dev/sdc2 root 5 inode 257 errors 100 Reported-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
-
Miao Xie authored
The function - btrfs_cont_expand() forgot to close the transaction handle before it jump out the while loop. Fix it. Signed-off-by:
-
Liu Bo authored
At the beginning of create_pending_snapshot, trans->block_rsv is set to pending->block_rsv and is used for snapshot things, however, when it is done, we do not recover it as will. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
-
Liu Bo authored
While truncating free space cache, we forget to change trans->block_rsv back to the original one, but leave it with the orphan_block_rsv, and then with option inode_cache enable, it leads to countless warnings of btrfs_alloc_free_block and btrfs_orphan_commit_root: WARNING: at fs/btrfs/extent-tree.c:5711 btrfs_alloc_free_block+0x180/0x350 [btrfs]() ... WARNING: at fs/btrfs/inode.c:2193 btrfs_orphan_commit_root+0xb0/0xc0 [btrfs]() Signed-off-by:
-
Josef Bacik authored
It's not enough to just search the commit root, since we could be cow'ing the very block we need to search through, which would mean that its locked and we'll still deadlock. So use path->skip_locking as well. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
Sergei Trofimovich authored
iput() shouldn't be called for inodes in I_NEW state. We need to mark inode as constructed first. WARNING: at fs/inode.c:1309 iput+0x20b/0x210() Call Trace: [<ffffffff8103e7ba>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8103e805>] warn_slowpath_null+0x15/0x20 [<ffffffff810eaf0b>] iput+0x20b/0x210 [<ffffffff811b96fb>] btrfs_iget+0x1eb/0x4a0 [<ffffffff811c3ad6>] btrfs_run_defrag_inodes+0x136/0x210 [<ffffffff811ad55f>] cleaner_kthread+0x17f/0x1a0 [<ffffffff81035b7d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffff811ad3e0>] ? transaction_kthread+0x280/0x280 [<ffffffff8105af86>] kthread+0x96/0xa0 [<ffffffff814336d4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105aef0>] ? kthread_worker_fn+0x190/0x190 [<ffffffff814336d0>] ? gs_change+0xb/0xb Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> CC: Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by:
-
Liu Bo authored
We can reproduce this oops via the following steps: $ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs $ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done $ rm -fr /mnt/btrfs/* $ rm -fr /mnt/btrfs/* then we'll get ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:2264! [...] Call Trace: [<ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs] [<ffffffff81150b95>] vfs_rmdir+0xa5/0xf0 [<ffffffff81153cc3>] do_rmdir+0x123/0x140 [<ffffffff81145ac7>] ? fput+0x197/0x260 [<ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0 [<ffffffff81153d0d>] sys_unlinkat+0x2d/0x40 [<ffffffff8147896b>] system_call_fastpath+0x16/0x1b RIP [<ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs] When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID, while the snapshot's location.objectid remains unchanged. However, btrfs_ino() does not take this into account, and returns a wrong ino, and causes the oops. Signed-off-by:
-
