- 06 Apr, 2017 19 commits
-
-
Rob Herring authored
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Tested-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by:
Sean Paul <seanpaul@chromium.org>
-
Rob Herring authored
Convert drivers to use the new of_graph_get_remote_node() helper instead of parsing the endpoint node and then getting the remote device node. Now drivers can just specify the device node and which port/endpoint and get back the connected remote device node. The details of the graph binding are nicely abstracted into the core OF graph code. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Liviu Dudau <liviu.dudau@arm.com> Tested-by:
Eric Anholt <eric@anholt.net> Tested-by:
Jyri Sarha <jsarha@ti.com> Tested by: Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Rob Herring authored
Many drivers have a common pattern of searching the OF graph for either an attached panel or bridge and then finding the DRM struct for the panel or bridge. Also, most drivers need to handle deferred probing when the DRM device is not yet instantiated. Create a common function, drm_of_find_panel_or_bridge, to find the connected node and the associated DRM panel or bridge device. Signed-off-by:
-
Rob Herring authored
For drm_of_find_panel_or_bridge() added in the next commit, an empty version of of_drm_find_panel is needed for !CONFIG_DRM_PANEL. Signed-off-by:
-
Maarten Lankhorst authored
The atomic_check function is useful for implementing properties, but it can be used for other connector modeset related checks as well. Similar to plane check functions, on a modeset atomic_check() is always called. Changes since v1: - Make sure atomic_check() is called on any modeset. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Maarten Lankhorst authored
Now that handle_conflicting_encoders no longer touches active state, so there's no need to do the check quite that late any more. Doing it with all the other checks makes it a lot more clear what the below block tries to accomplish, and this feels like a better place to put the check. Signed-off-by:
-
Maarten Lankhorst authored
Now that handle_conflicting_encoders cannot disable crtc's any more it makes sense to set all the changed flags in 1 place. This makes the code slightly less magical. The (now removed) comment is out of date. The only reason the active_changed was set late was because handle_conflicting_encoders could disable connectors. This is no longer the case, and we can put everything in 1 place. Signed-off-by:
-
Maarten Lankhorst authored
Currently we use a flag to change behavior in atomic commit whether a conflicting encoder should be enabled or disabled. This is used for the legacy set_config helper, which disables connectors that have a conflicting encoder but not part of the active crtc list. There's no need for this to be handled in atomic commit, it could be done in the set_config helper instead. This will let the atomic check function reject any conflicting encoders, while set_config can disable conflicting crtc's. This makes it possible to recalculate the changed flags in 1 loop. Signed-off-by:
-
Daniel Vetter authored
Legacy drivers insist that we really take all the locks in this path, and the harm in doing so is minimal. v2: Like git add, it exists :( Fixes: 2ceb585a ("drm: Add explicit acquire ctx handling around ->set_config") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: Alex Deucher <alexdeucher@gmail.com> Reported-by:
Alex Deucher <alexdeucher@gmail.com> Acked-and-tested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170406190654.6733-1-daniel.vetter@ffwll.ch
-
Maarten Lankhorst authored
mode_valid() called from drm_helper_probe_single_connector_modes() may need to look at connector->state because what a valid mode is may depend on connector properties being set. For example some HDMI modes might be rejected when a connector property forces the connector into DVI mode. Some implementations of detect() already lock all state, so we have to pass an acquire_ctx to them to prevent a deadlock. This means changing the function signature of detect() slightly, and passing the acquire_ctx for locking multiple crtc's. For the callbacks, it will always be non-zero. To allow callers not to worry about this, drm_helper_probe_detect_ctx is added which might handle -EDEADLK for you. Changes since v1: - Always set ctx parameter. Changes since v2: - Always take connection_mutex when probing. Changes since v3: - Remove the ctx from intel_dp_long_pulse, and add WARN_ON(!connection_mutex) (danvet) - Update docs to clarify the locking situation. (danvet) Signed-off-by:
-
Laurent Vivier authored
When we use virtio-vga with a big-endian guest, the mouse pointer disappears. To fix that, on big-endian use DRM_FORMAT_BGRA8888 instead of DRM_FORMAT_ARGB8888. Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170405080915.823-1-lvivier@redhat.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Dan Carpenter authored
There was supposed to be a break before the next case statement. Fixes: def23aa7 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Neil Armstrong authored
Remove usused yet hdmi_bus_fmt_is_yuv420 function. Fixes: def23aa7 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491377579-9353-1-git-send-email-narmstrong@baylibre.com
-
Daniel Vetter authored
The goal is to push all the kms locking down into these separate _atomic and _legacy functions, so that we can correctly pass the acquire ctx into all atomic drivers. Instead of playing games with hidden ctx in mode_config.acquire_ctx. All the fbdev state will be protected by a new fbdev private lock that Thierry is working on. This here is just prep by creating a clean split between atomic and legacy paths, which also simplifies the control flow a bit. Reviewed-by:
-
Daniel Vetter authored
I got confused every time I audited what that lock_all is doing in there until realizing it's for legacy kms only. Make that a notch more obvious by having 2 entirely different paths. While at it also move the atomic version of this into drm_framebuffer.c, there's no reason it needs to be in drm_atomic.c. That way it becomes a simple static function. Reviewed-by:
-
Daniel Vetter authored
Another one knocked down. With this we can also remove the temporary hack in the gamma_set ioctl. Reviewed-by:
-
Daniel Vetter authored
Atomic helpers really want this instead of the hacked-up legacy backoff trick, which unfortunately prevents drivers from using their own private drm_modeset_locks. Aside: There's a few atomic drivers (nv50, vc4, soon vmwgfx) which don't yet use the new atomic color mgmt/gamma table stuff. Would be nice if they could switch over and just hook up drm_atomic_helper_legacy_gamma_set() instead. Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Daniel Vetter authored
Just the groundwork to prepare for adding the acquire cxt parameter to the ->gamma_set hook. Again we need a temporary hack to fill out mode_config.acquire_ctx until the atomic helpers are switched over. Reviewed-by:
-
Daniel Vetter authored
It just doesn't work. It probably stopped working way, way before that (e.g. i915 grabbed random mutexes all over in modeset code at least since gen6), but with atomic and all the ww_mutex stuff it's indeed hopeless. Remove ->mode_set_base_atomic from the 2 atomic drivers (i915 and nouveau) that still had one (both had dummy implementations already anyway), and shunt atomic drivers in the helpers debug_enter/leave functions. I'll leave the code in for radeon and amdgpu, but I think as soon as amdgpu is atomic we should think about just ripping it out. Only having it around for radeon and pre-nv50 is rather pointless. This would also allow us to nuke all that code from fbdev. Funny part is that _all_ kms drivers set this hook, despite that no one else provides the required ->mode_set_base_atomic implementation. The reason I'm jumping on this is that I want to wire up a full acquire ctx for the benefit of atomic drivers, everywhere. And the debug_enter/leave implementations call ->gamma_set. And there's just no way ever we can create an acquire_ctx in the nmi context of kgdb. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
- 05 Apr, 2017 8 commits
-
-
Daniel Vetter authored
We do set DRIVER_ATOMIC now. Note that the comment is outdated, the property paths switched over to checking drm_drv_uses_atomic_modeset() a while ago. Which means this can't even break if we revert DRIVER_ATOMIC again. v2: Add note that this is even safer (Maarten). Reviewed-by:
-
Daniel Vetter authored
We don't call into drivers at all here, this is enough. Also, we can reduce the critical section a bit to simplify the code. crtc->gamma_size is set up once at driver load and then invariant, so also doesn't need any protection. Reviewed-by:
-
Daniel Vetter authored
Properties, i.e. the struct drm_property specifying the type and value range of a property, not the instantiation on a given object, are invariant over the lifetime of a driver. Hence no locking at all is needed, we can just remove it. While at it give the function some love and simplify it, to get it under the 80 char limit: - Straighten the loops to reduce the nesting. - use u64_to_user_ptr casting helper - use put_user for fixed u64 copies. Note there's a small behavioural change in that we now copy parts of the values to userspace if the arrays are a bit too small. Since userspace will immediately retry anyway, this doesn't matter. Reviewed-by:
-
Daniel Vetter authored
If we push the locks down we don't have to take them all at the same time. Aside: Making dump_info fully safe should be fairly simple, if we protect the ->state pointers with rcu. Simply putting a synchronize_rcu() into the drm_atomic_state free function should be all that's roughly needed. Well except we shouldn't block in there, so better to put that into a work_struct. But I've not set out to fix that little issue. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by:
-
Daniel Vetter authored
Atomic code rely shouldn't rely on the magic hidden acquire context. v2: Remove unused config local var (gcc). Reviewed-by:
-
Daniel Vetter authored
With all the callers of drm_modeset_lock_crtc gone, and all the places it was formerly used properly wiring the acquire ctx through, we can remove this. The only hidden context magic we still have is now the global one. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Daniel Vetter authored
The last user, the cursor ioctl, can just open-code this too. We simply have to move the acquire ctx dance from the universal function up into the top-level ioctl handler. Reviewed-by:
-
Daniel Vetter authored
This is only for legacy paths that need to grab the crtc/plane lock combo. If you want to lock a crtc, just use drm_modeset_lock(). Reviewed-by:
-
- 04 Apr, 2017 13 commits
-
-
Ander Conselvan de Oliveira authored
With the atomic API, it is possible that a single commit affects multiple crtcs. If the user requests an event with that commit, one event will be sent for each CRTC, but it is not possible to distinguish which crtc an event is for in user space. To solve this, the reserved field in struct drm_vblank_event is repurposed to include the crtc_id which the event is for. The DRM_CAP_CRTC_IN_VBLANK_EVENT is added to allow userspace to query if the crtc field will be set properly. [daniels: Rebased, using Maarten's forward-port.] Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
Daniel Stone <daniels@collabora.com> Cc: Maarten Lankhorst <maarten.lankhorst@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170404165221.28240-2-daniels@collabora.com
-
Daniel Vetter authored
Drive-by cleanup. Reviewed-by:
-
Daniel Vetter authored
Also unify/merge with the existing stuff. I was a bit torn where to put this, but in the end I decided to put all the ioctl/sysfs/debugfs stuff into drm-uapi.rst. That means we have a bit a split with the other uapi related stuff used internally, like drm_file.[hc], but I think overall this makes more sense. If it's too confusing we can always add more cross-links to make it more discoverable. But the auto-sprinkling of links kernel-doc already does seems sufficient. Also for prettier docs and more cross-links, switch the internal defines over to an enum, as usual. v2: Update kerneldoc fro drm_compat_ioctl too (caught by 0day), plus a bit more drive-by polish. v3: Fix typo, spotted by xerpi on irc (Sergi). v4: Add missing space in comment (Neil). Cc: Sergi Granell <xerpi.g.12@gmail.com> Reviewed-by:
-
Daniel Vetter authored
- remove docs for internal func, doesn't add value - add short overview snippet instead explaining that drivers don't have to bother themselves with reg/unreg concerns - drop the ttm comment about drmP.h, drmP.h is disappearing ... Reviewed-by:
-
Daniel Vetter authored
Just drive-by, but we have gsoc running so better to update it now. Great news is that two entries can be removed because essentially all done. v2: Keep a bunch of the todos, Gabriel is working on them. Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by:
-
John Keeping authored
This reset is required in order to fully reset the internal state of the MIPI controller. Signed-off-by:
John Keeping <john@metanate.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Acked-by:
-
Neil Armstrong authored
This patch adds the dw-hdmi bindings and RST kerneldoc to maintained files. Acked-by:
-
Neil Armstrong authored
Acked-by:
-
Neil Armstrong authored
Acked-by:
-
Neil Armstrong authored
This binding describes the Amlogic Meson specific extension to the Synopsys Designware HDMI Controller. Acked-by:
-
Neil Armstrong authored
The Amlogic Meson GXBB/GXL/GXM SoCs embeds a Synopsys DesignWare HDMI TX Controller with a custom Bridge + PHY around the Controller. This driver makes uses of all the custom PHY plat data callbacks and enables the compatible HDMI modes to be configured as a drm_encoder instance. Acked-by:
-
Neil Armstrong authored
This patch adds support for the supported HDMI Venc modes and add the VPP mux value to switch to ENCP encoder. Acked-by:
-
Neil Armstrong authored
This patchs adds support for the supported HDMI modes clocks frequencies. Acked-by:
-
