It is not unusual to have the bridge port down. Sometimes
it has the old MTU, which is fine since it's not being used.

However, the kernel spams the log with a warning message
when a packet is going to be sent over such port. Fix that
by warning only if the interface is UP.
Signed-off-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 0bb3262c.

Breaks things on mips64/qemu
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Horatiu Vultur says:

====================
net: ocelot: Extend MRP

This patch series extends the current support of MRP in Ocelot driver.
Currently the forwarding of the frames happened in SW because all frames
were trapped to CPU. With this patch the MRP frames will be forward in HW.

v1 -> v2:
 - create a patch series instead of single patch
 - rename ocelot_mrp_find_port to ocelot_mrp_find_partner_port
 - rename PGID_MRP to PGID_BLACKHOLE
 - use GFP_KERNEL instead of GFP_ATOMIC
 - fix other whitespace issues
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now when extracting frames from CPU the cpuq is not used anymore so
remove it.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch extends MRP support for Ocelot. It allows to have multiple
rings and when the node has the MRC role it forwards MRP Test frames in
HW. For MRM there is no change.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new PGID that is used not to forward frames anywhere. It is used
by MRP to make sure that MRP Test frames will not reach CPU port.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2021-03-16

This series contains updates to i40e, ixgbe, and ice drivers.

Magnus Karlsson says:

Optimize run_xdp_zc() for the XDP program verdict being XDP_REDIRECT
in the xsk zero-copy path. This path is only used when having AF_XDP
zero-copy on and in that case most packets will be directed to user
space. This provides around 100k extra packets in throughput on my
server when running l2fwd in xdpsock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Add support for egress and policy-based sampling

So far mlxsw only supported ingress sampling using matchall classifier.
This series adds support for egress sampling and policy-based sampling
using flower classifier on Spectrum-2 and newer ASICs. As such, it is
now possible to issue these commands:

 # tc filter add dev swp1 egress pref 1 proto all matchall action sample rate 100 group 1

 # tc filter add dev swp2 ingress pref 1 proto ip flower dst_ip 198.51.100.1 action sample rate 100 group 2

When performing egress sampling (using either matchall or flower) the
ASIC is able to report the end-to-end latency which is passed to the
psample module.

Series overview:

Patches #1-#3 are preparations without any functional changes

Patch #4 generalizes the idea of sampling triggers and creates a hash
table to track active sampling triggers in preparation for egress and
policy-based triggers. The motivation is explained in the changelog

Patch #5 flips mlxsw to start using this hash table instead of storing
ingress sampling triggers as an attribute of the sampled port

Patch #6 finally adds support for egress sampling using matchall
classifier

Patches #7-#8 add support for policy-based sampling using flower
classifier

Patches #9 extends the mlxsw sampling selftest to cover the new triggers

Patch #10 makes sure that egress sampling configuration only fails on
Spectrum-1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure egress sampling configuration only fails on Spectrum-1, given
that mlxsw now supports it on Spectrum-{2,3}.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test that packets are sampled when tc-sample is used with matchall
egress binding and flower classifier. Verify that when performing
sampling on egress the end-to-end latency is reported as metadata.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement support for action sample when used with a flower classifier
by implementing the required sampler_add() / sampler_del() callbacks and
registering an Rx listener for the sampled packets.

The sampler_add() callback returns an error for Spectrum-1 as the
functionality is not supported. In Spectrum-{2,3} the callback creates a
mirroring agent towards the CPU. The agent's identifier is used by the
policy engine code to mirror towards the CPU with probability.

The Rx listener for the sampled packet is registered with the 'policy
engine' mirroring reason and passes trapped packets to the psample
module after looking up their parameters (e.g., sampling group).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add core functionality required to support mirror sampler action in the
policy engine. The switch driver (e.g., 'mlxsw_spectrum') is required to
implement the sampler_add() / sampler_del() callbacks that perform the
necessary configuration before the sampler action can be installed. The
next patch will implement it for Spectrum-{2,3}, while Spectrum-1 will
return an error, given it is not supported.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow user space to install a matchall classifier with sample action on
egress. This is only supported on Spectrum-2 onwards, so Spectrum-1 will
continue to return an error.

Programming the hardware to sample on egress is identical to ingress
sampling with the sole change of using a different sampling trigger.

Upon receiving a sampled packet, the sampling trigger (ingress vs.
egress) will be encoded in the mirroring reason in the Completion Queue
Element (CQE). The mirroring reason is used to lookup the sampling
parameters (e.g., psample group) which are passed to the psample module.

Note that locally generated packets that are sampled are simply
consumed. This is done for several reasons.

First, such packets do not have an ingress netdev given that their Rx
local port is the CPU port. This breaks several basic assumptions.

Second, sampling using the same interface (tc), but with flower
classifier will not result in locally generated packets being sampled
given that such packets are not subject to the policy engine.

Third, realistically, this is not a big deal given that the vast
majority of the packets being transmitted through the port are not
locally generated packets.

Fourth, if such packets do need to be sampled, they can be sampled with
a 'skip_hw' filter and reported to the same sampling group as the data
path packets. The software sampling rate can also be adjusted to fit the
rate of the locally generated packets which is much lower than the rate
of the data path traffic.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Start using the previously introduced sampling triggers hash table to
store sampling parameters instead of storing them as attributes of the
sampled port.

This makes it easier to introduce new sampling triggers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, mlxsw supports a single sampling trigger type (i.e., received
packet). When sampling is configured on an ingress port, the sampling
parameters (e.g., pointer to the psample group) are stored as an
attribute of the port, so that they could be passed to
psample_sample_packet() when a sampled packet is trapped to the CPU.

Subsequent patches are going to add more types of sampling triggers,
making it difficult to maintain the current scheme.

Instead, store all the active sampling triggers with their associated
parameters in a hash table. That way, more trigger types can be easily
added.

The next patch will flip mlxsw to use the hash table instead of the
current scheme.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The entry will be required by the next patches, so pass it. No
functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Push some sampling checks to the per-ASIC operations, as they are no
longer relevant for all ASICs.

The sampling rate validation against the MPSC maximum rate is only
relevant for Spectrum-1, as Spectrum-2 and later ASICs no longer use
MPSC register for sampling.

The ingress / egress validation is pushed down to the per-ASIC
operations since subsequent patches are going to remove it for
Spectrum-2 and later ASICs.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to the differences between Spectrum-1 and later ASICs, some of the
checks currently performed at the common code (where extack is
available) will need to be pushed to the per-ASIC operations.

As a preparation, propagate extack further to maintain proper error
reporting.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Ciornei says:

====================
dpaa2-switch: small cleanup

This patch set addresses various low-hanging issues in both dpaa2-switch
and dpaa2-eth drivers.
Unused ABI functions are removed from dpaa2-switch, all the kernel-doc
warnings are fixed up in both drivers and the coding style for the
remaining ABIs is fixed-up a bit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Running kernel-doc over the dpaa2-eth driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory, respecting the kdoc format for macro documentation and
other small changes like describing the expected return values of
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Multiple ABI function declarations are split unnecessarry on multiple
lines. Fix this so that we have a consistent coding style.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The maximum number of DPAA2 switch interfaces, including the control
interface, is 64. Even though this restriction existed from the first
place, the command structures which use an interface id bitmap were
poorly described and even though a single uint64_t is enough, all of
them used an array of 4 uint64_t's.
Fix this by reducing the size of the interface id field to a single
uint64_t.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Running kernel-doc over the dpaa2-switch driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory and adding a bit more context for the
dpsw_if_get_port_mac_addr() function and the fields of the
dpsw_vlan_if_cfg structure.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup the dpaa2-switch driver a bit by removing any unused MC firmware
ABI definitions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following coccicheck report:

drivers/net/ipa/gsi.c:1341:2-9:
line 1341 is redundant because platform_get_irq() already prints an error

Remove dev_err() messages after platform_get_irq_byname() failures.
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Documentation updates for switchdev and DSA

Many changes were made to the code but of course the documentation was
not kept up to date. This is an attempt to update some of the verbiage.

The documentation is still not complete, but it's time to make some more
changes to the code first, before documenting the rest.

Changes in v2:
Integrated feedback from Andrew, Florian, Tobias, Ido, George.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "bridge fdb add" command provided in the switchdev documentation is
junk now, not only because it is syntactically incorrect and rejected by
the iproute2 bridge program, but also because it was not updated in
light of Arkadi Sharshevsky's radical switchdev refactoring in commit
29ab586c ("net: switchdev: Remove bridge bypass support from
switchdev"). Try to explain what the intended usage pattern is with the
new kernel implementation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides details on the expected behavior of switchdev
enabled network devices when operating in a "stand alone" mode, as well
as when being bridge members. This clarifies a number of things that
recently came up during a bug fixing session on the b53 DSA switch
driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a short summary of the methods that a driver writer must implement
for offloading a HSR/PRP network interface.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a short summary of the methods that a driver writer must implement
for getting an MRP instance to work on top of a DSA switch.

Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a short summary of the methods that a driver writer must implement
for offloading a link aggregation group, and what is still missing.

Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a short summary of the devlink features supported by the DSA core.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The documentation was already lagging behind by not mentioning the old
version of port_bridge_flags (port_set_egress_floods). So now we are
skipping one step and just explaining how a DSA driver should configure
address learning and flooding settings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

On one hand, the link is dead and therefore useless.

On the other hand, there are always more drivers to port, but at this
stage, DSA does not need to affirm itself as the driver model to use for
Ethernet-connected switches (since we already have 15 tagging protocols
supported and probably more switch families from various vendors), so
there is nothing actionable to do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the recent series containing commit bae33f2b ("net: switchdev:
remove the transaction structure from port attributes"), there aren't
prepare/commit transactional phases anymore in most of the switchdev
objects/attributes, and as a result, there aren't any in the DSA driver
API either. So remove this piece.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

After Vivien's series from 2019 containing commits 27d4d19d ("net:
dsa: remove limitation of switch index value") and ab8ccae1 ("net:
dsa: add ports list in the switch fabric"), this is basically no longer
true.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The chapter about tagging protocols is out of date because it doesn't
mention all taggers that have been added since last documentation
update. But judging based on that, it will always tend to lag behind,
and there's no good reason why we would enumerate the supported
hardware. Instead we could do something more useful and explain what
there is to know about tagging protocols instead.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While preparing some slides for a customer presentation, I found the
existing high-level view to be a bit confusing, so I modified it a
little bit.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-03-15

This series contains updates to e1000e only.

Chen Yu says:

The NIC is put in runtime suspend status when there is no cable connected.
As a result, it is safe to keep non-wakeup NIC in runtime suspended during
s2ram because the system does not rely on the NIC plug event nor WoL to
wake up the system. Besides that, unlike the s2idle, s2ram does not need to
manipulate S0ix settings during suspend.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

proc_creat_seq() that directly take a struct seq_operations,
and deal with network namespaces in ->open.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>