- 10 Jun, 2013 2 commits
-
-
Jens Axboe authored
This reverts commit fb1e7538. "Benjamin S." <sbenni@gmx.de> reports that the patch in question causes a big drop in sequential throughput for him, dropping from 200MB/sec down to only 70MB/sec. Needs to be investigated more fully, for now lets just revert the offending commit. Conflicts: include/linux/blkdev.h Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> (cherry picked from commit 79da0644) Cc: Thomas Bork <tom@eisfair.net> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Ben Hutchings authored
This reverts commit 2af3af56, which was commit 6c4088ac upstream. This broke compilation of the driver in 2.6.32.y as the early_io{remap,unmap}() functions are not defined for ia64. The driver can *only* be built for ia64 (even in current mainline), so a fix for x86_64 is pointless. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
- 07 Oct, 2012 38 commits
-
-
Willy Tarreau authored
Signed-off-by: -
Tony Luck authored
commit d114a333 upstream. Send the entire DMI (SMBIOS) table to the /dev/random driver to help seed its pools. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Mark Brown authored
commit 27130f0c upstream. wm831x devices contain a unique ID value. Feed this into the newly added device_add_randomness() to add some per device seed data to the pool. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit 9dccf55f upstream. The tamper evident features of the RTC include the "write counter" which is a pseudo-random number regenerated whenever we set the RTC. Since this value is unpredictable it should provide some useful seeding to the random number generator. Only do this on boot since the goal is to seed the pool rather than add useful entropy. Signed-off-by:
-
Tony Luck authored
commit cbc96b75 upstream. Many platforms have per-machine instance data (serial numbers, asset tags, etc.) squirreled away in areas that are accessed during early system bringup. Mixing this data into the random pools has a very high value in providing better random data, so we should allow (and even encourage) architecture code to call add_device_randomness() from the setup_arch() paths. However, this limits our options for internal structure of the random driver since random_initialize() is not called until long after setup_arch(). Add a big fat comment to rand_initialize() spelling out this requirement. Suggested-by:
-
Theodore Ts'o authored
commit c5857ccf upstream. With the new interrupt sampling system, we are no longer using the timer_rand_state structure in the irq descriptor, so we can stop initializing it now. [ Merged in fixes from Sedat to find some last missing references to rand_initialize_irq() ] Signed-off-by:
Sedat Dilek <sedat.dilek@gmail.com> [PG: in .34 the irqdesc.h content is in irq.h instead.] Signed-off-by:
-
Theodore Ts'o authored
commit 7bf23575 upstream. Cc: David Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Theodore Ts'o authored
commit b04b3156 upstream. Send the USB device's serial, product, and manufacturer strings to the /dev/random driver to help seed its pools. Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Greg KH <greg@kroah.com> Signed-off-by:
-
Theodore Ts'o authored
commit 330e0a01 upstream. Matt Mackall stepped down as the /dev/random driver maintainer last year, so Theodore Ts'o is taking back the /dev/random driver. Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
H. Peter Anvin authored
commit d2e7c96a upstream. Mix in any architectural randomness in extract_buf() instead of xfer_secondary_buf(). This allows us to mix in more architectural randomness, and it also makes xfer_secondary_buf() faster, moving a tiny bit of additional CPU overhead to process which is extracting the randomness. [ Commit description modified by tytso to remove an extended advertisement for the RDRAND instruction. ] Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: DJ Johnston <dj.johnston@intel.com> Signed-off-by:
-
Theodore Ts'o authored
commit c2557a30 upstream. Create a new function, get_random_bytes_arch() which will use the architecture-specific hardware random number generator if it is present. Change get_random_bytes() to not use the HW RNG, even if it is avaiable. The reason for this is that the hw random number generator is fast (if it is present), but it requires that we trust the hardware manufacturer to have not put in a back door. (For example, an increasing counter encrypted by an AES key known to the NSA.) It's unlikely that Intel (for example) was paid off by the US Government to do this, but it's impossible for them to prove otherwise --- especially since Bull Mountain is documented to use AES as a whitener. Hence, the output of an evil, trojan-horse version of RDRAND is statistically indistinguishable from an RDRAND implemented to the specifications claimed by Intel. Short of using a tunnelling electronic microscope to reverse engineer an Ivy Bridge chip and disassembling and analyzing the CPU microcode, there's no way for us to tell for sure. Since users of get_random_bytes() in the Linux kernel need to be able to support hardware systems where the HW RNG is not present, most time-sensitive users of this interface have already created their own cryptographic RNG interface which uses get_random_bytes() as a seed. So it's much better to use the HW RNG to improve the existing random number generator, by mixing in any entropy returned by the HW RNG into /dev/random's entropy pool, but to always _use_ /dev/random's entropy pool. This way we get almost of the benefits of the HW RNG without any potential liabilities. The only benefits we forgo is the speed/performance enhancements --- and generic kernel code can't depend on depend on get_random_bytes() having the speed of a HW RNG anyway. For those places that really want access to the arch-specific HW RNG, if it is available, we provide get_random_bytes_arch(). Signed-off-by:
-
Theodore Ts'o authored
commit e6d4947b upstream. If the CPU supports a hardware random number generator, use it in xfer_secondary_pool(), where it will significantly improve things and where we can afford it. Also, remove the use of the arch-specific rng in add_timer_randomness(), since the call is significantly slower than get_cycles(), and we're much better off using it in xfer_secondary_pool() anyway. Signed-off-by:
-
Linus Torvalds authored
commit a2080a67 upstream. Add a new interface, add_device_randomness() for adding data to the random pool that is likely to differ between two devices (or possibly even per boot). This would be things like MAC addresses or serial numbers, or the read-out of the RTC. This does *not* add any actual entropy to the pool, but it initializes the pool to different values for devices that might otherwise be identical and have very little entropy available to them (particularly common in the embedded world). [ Modified by tytso to mix in a timestamp, since there may be some variability caused by the time needed to detect/configure the hardware in question. ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Theodore Ts'o authored
commit 902c098a upstream. The real-time Linux folks don't like add_interrupt_randomness() taking a spinlock since it is called in the low-level interrupt routine. This also allows us to reduce the overhead in the fast path, for the random driver, which is the interrupt collection path. Signed-off-by:
-
Theodore Ts'o authored
commit 775f4b29 upstream. We've been moving away from add_interrupt_randomness() for various reasons: it's too expensive to do on every interrupt, and flooding the CPU with interrupts could theoretically cause bogus floods of entropy from a somewhat externally controllable source. This solves both problems by limiting the actual randomness addition to just once a second or after 64 interrupts, whicever comes first. During that time, the interrupt cycle data is buffered up in a per-cpu pool. Also, we make sure the the nonblocking pool used by urandom is initialized before we start feeding the normal input pool. This assures that /dev/urandom is returning unpredictable data as soon as possible. (Based on an original patch by Linus, but significantly modified by tytso.) Tested-by:
Eric Wustrow <ewust@umich.edu> Reported-by:
Nadia Heninger <nadiah@cs.ucsd.edu> Reported-by:
Zakir Durumeric <zakir@umich.edu> Reported-by: J. Alex Halderman <jhalderm@umich.edu>. Signed-off-by:
-
Mathieu Desnoyers authored
commit 44e4360f upstream. /proc/sys/kernel/random/boot_id can be read concurrently by userspace processes. If two (or more) user-space processes concurrently read boot_id when sysctl_bootid is not yet assigned, a race can occur making boot_id differ between the reads. Because the whole point of the boot id is to be unique across a kernel execution, fix this by protecting this operation with a spinlock. Given that this operation is not frequently used, hitting the spinlock on each call should not be an issue. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
H. Peter Anvin authored
commit 2dac8e54 upstream. When we are initializing using arch_get_random_long() we only need to loop enough times to touch all the bytes in the buffer; using poolwords for that does twice the number of operations necessary on a 64-bit machine, since in the random number generator code "word" means 32 bits. Signed-off-by:
-
Theodore Ts'o authored
commit 3e88bdff upstream. If there is an architecture-specific random number generator (such as RDRAND for Intel architectures), use it to initialize /dev/random's entropy stores. Even in the worst case, if RDRAND is something like AES(NSA_KEY, counter++), it won't hurt, and it will definitely help against any other adversaries. Signed-off-by:
-
Linus Torvalds authored
commit cf833d0b upstream. We still don't use rdrand in /dev/random, which just seems stupid. We accept the *cycle*counter* as a random input, but we don't accept rdrand? That's just broken. Sure, people can do things in user space (write to /dev/random, use rdrand in addition to /dev/random themselves etc etc), but that *still* seems to be a particularly stupid reason for saying "we shouldn't bother to try to do better in /dev/random". And even if somebody really doesn't trust rdrand as a source of random bytes, it seems singularly stupid to trust the cycle counter *more*. So I'd suggest the attached patch. I'm not going to even bother arguing that we should add more bits to the entropy estimate, because that's not the point - I don't care if /dev/random fills up slowly or not, I think it's just stupid to not use the bits we can get from rdrand and mix them into the strong randomness pool. Link: http://lkml.kernel.org/r/CA%2B55aFwn59N1=m651QAyTy-1gO1noGbK18zwKDwvwqnravA84A@mail.gmail.comAcked-by:
"David S. Miller" <davem@davemloft.net> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Cc: Matt Mackall <mpm@selenic.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Luck, Tony authored
commit bd29e568 upstream. If there is an architecture-specific random number generator we use it to acquire randomness one "long" at a time. We should put these random words into consecutive words in the result buffer - not just overwrite the first word again and again. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
H. Peter Anvin authored
commit 49d859d7 upstream. If the CPU declares that RDRAND is available, go through a guranteed reseed sequence, and make sure that it is actually working (producing data.) If it does not, disable the CPU feature flag. Allow RDRAND to be disabled on the command line (as opposed to at compile time) for a user who has special requirements with regards to random numbers. Signed-off-by:
-
H. Peter Anvin authored
commit 628c6246 upstream. Architectural inlines to get random ints and longs using the RDRAND instruction. Intel has introduced a new RDRAND instruction, a Digital Random Number Generator (DRNG), which is functionally an high bandwidth entropy source, cryptographic whitener, and integrity monitor all built into hardware. This enables RDRAND to be used directly, bypassing the kernel random number pool. For technical documentation, see: http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/ In this patch, this is *only* used for the nonblocking random number pool. RDRAND is a nonblocking source, similar to our /dev/urandom, and is therefore not a direct replacement for /dev/random. The architectural hooks presented in the previous patch only feed the kernel internal users, which only use the nonblocking pool, and so this is not a problem. Since this instruction is available in userspace, there is no reason to have a /dev/hw_rng device driver for the purpose of feeding rngd. This is especially so since RDRAND is a nonblocking source, and needs additional whitening and reduction (see the above technical documentation for details) in order to be of "pure entropy source" quality. The CONFIG_EXPERT compile-time option can be used to disable this use of RDRAND. Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
H. Peter Anvin authored
commit 63d77173 upstream. Add support for architecture-specific hooks into the kernel-directed random number generator interfaces. This patchset does not use the architecture random number generator interfaces for the userspace-directed interfaces (/dev/random and /dev/urandom), thus eliminating the need to distinguish between them based on a pool pointer. Changes in version 3: - Moved the hooks from extract_entropy() to get_random_bytes(). - Changes the hooks to inlines. Signed-off-by:
-
Kees Cook authored
commit 7ccafc5f upstream. The Intel manual changed the name of the CPUID bit to match the instruction name. We should follow suit for sanity's sake. (See Intel SDM Volume 2, Table 3-20 "Feature Information Returned in the ECX Register".) [ hpa: we can only do this at this time because there are currently no CPUs with this feature on the market, hence this is pre-hardware enabling. However, Cc:'ing stable so that stable can present a consistent ABI. ] Signed-off-by:
Kees Cook <kees.cook@canonical.com> Link: http://lkml.kernel.org/r/20110524232926.GA27728@outflux.netSigned-off-by:
-
H. Peter Anvin authored
commit 24da9c26 upstream. Add support for the newly documented F16C (16-bit floating point conversions) and RDRND (RDRAND instruction) CPU feature flags. Signed-off-by:
-
Matt Mackall authored
commit e954bc91 upstream. Rather than dynamically allocate 10 bytes, move it to static allocation. This saves space and avoids the need for error checking. Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Jarod Wilson authored
commit 442a4fff upstream. At present, the comment header in random.c makes no mention of add_disk_randomness, and instead, suggests that disk activity adds to the random pool by way of add_interrupt_randomness, which appears to not have been the case since sometime prior to the existence of git, and even prior to bitkeeper. Didn't look any further back. At least, as far as I can tell, there are no storage drivers setting IRQF_SAMPLE_RANDOM, which is a requirement for add_interrupt_randomness to trigger, so the only way for a disk to contribute entropy is by way of add_disk_randomness. Update comments accordingly, complete with special mention about solid state drives being a crappy source of entropy (see e2e1a148 for reference). Signed-off-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
-
Richard Kennedy authored
commit 4015d9a8 upstream. Re-order structure entropy_store to remove 8 bytes of padding on 64 bit builds, so shrinking this structure from 72 to 64 bytes and allowing it to fit into one cache line. Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by:
-
Jason Baron authored
commit 13d51807 upstream. An epoll_ctl(,EPOLL_CTL_ADD,,) operation can return '-ELOOP' to prevent circular epoll dependencies from being created. However, in that case we do not properly clear the 'tfile_check_list'. Thus, add a call to clear_tfile_check_list() for the -ELOOP case. Signed-off-by:
Jason Baron <jbaron@redhat.com> Reported-by:
Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Davide Libenzi <davidel@xmailserver.org> Tested-by:
Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> Signed-off-by:
-
Jason Baron authored
commit 93dc6107 upstream. Commit 28d82dc1 ("epoll: limit paths") that I did to limit the number of possible wakeup paths in epoll is causing a few applications to longer work (dovecot for one). The original patch is really about limiting the amount of epoll nesting (since epoll fds can be attached to other fds). Thus, we probably can allow an unlimited number of paths of depth 1. My current patch limits it at 1000. And enforce the limits on paths that have a greater depth. This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jason Baron authored
commit 28d82dc1 upstream. The current epoll code can be tickled to run basically indefinitely in both loop detection path check (on ep_insert()), and in the wakeup paths. The programs that tickle this behavior set up deeply linked networks of epoll file descriptors that cause the epoll algorithms to traverse them indefinitely. A couple of these sample programs have been previously posted in this thread: https://lkml.org/lkml/2011/2/25/297. To fix the loop detection path check algorithms, I simply keep track of the epoll nodes that have been already visited. Thus, the loop detection becomes proportional to the number of epoll file descriptor and links. This dramatically decreases the run-time of the loop check algorithm. In one diabolical case I tried it reduced the run-time from 15 mintues (all in kernel time) to .3 seconds. Fixing the wakeup paths could be done at wakeup time in a similar manner by keeping track of nodes that have already been visited, but the complexity is harder, since there can be multiple wakeups on different cpus...Thus, I've opted to limit the number of possible wakeup paths when the paths are created. This is accomplished, by noting that the end file descriptor points that are found during the loop detection pass (from the newly added link), are actually the sources for wakeup events. I keep a list of these file descriptors and limit the number and length of these paths that emanate from these 'source file descriptors'. In the current implemetation I allow 1000 paths of length 1, 500 of length 2, 100 of length 3, 50 of length 4 and 10 of length 5. Note that it is sufficient to check the 'source file descriptors' reachable from the newly added link, since no other 'source file descriptors' will have newly added links. This allows us to check only the wakeup paths that may have gotten too long, and not re-check all possible wakeup paths on the system. In terms of the path limit selection, I think its first worth noting that the most common case for epoll, is probably the model where you have 1 epoll file descriptor that is monitoring n number of 'source file descriptors'. In this case, each 'source file descriptor' has a 1 path of length 1. Thus, I believe that the limits I'm proposing are quite reasonable and in fact may be too generous. Thus, I'm hoping that the proposed limits will not prevent any workloads that currently work to fail. In terms of locking, I have extended the use of the 'epmutex' to all epoll_ctl add and remove operations. Currently its only used in a subset of the add paths. I need to hold the epmutex, so that we can correctly traverse a coherent graph, to check the number of paths. I believe that this additional locking is probably ok, since its in the setup/teardown paths, and doesn't affect the running paths, but it certainly is going to add some extra overhead. Also, worth noting is that the epmuex was recently added to the ep_ctl add operations in the initial path loop detection code using the argument that it was not on a critical path. Another thing to note here, is the length of epoll chains that is allowed. Currently, eventpoll.c defines: /* Maximum number of nesting allowed inside epoll sets */ This basically means that I am limited to a graph depth of 5 (EP_MAX_NESTS + 1). However, this limit is currently only enforced during the loop check detection code, and only when the epoll file descriptors are added in a certain order. Thus, this limit is currently easily bypassed. The newly added check for wakeup paths, stricly limits the wakeup paths to a length of 5, regardless of the order in which ep's are linked together. Thus, a side-effect of the new code is a more consistent enforcement of the graph depth. Thus far, I've tested this, using the sample programs previously mentioned, which now either return quickly or return -EINVAL. I've also testing using the piptest.c epoll tester, which showed no difference in performance. I've also created a number of different epoll networks and tested that they behave as expectded. I believe this solves the original diabolical test cases, while still preserving the sane epoll nesting. Signed-off-by:
-
Oleg Nesterov authored
commit 971316f0 upstream. signalfd_cleanup() ensures that ->signalfd_wqh is not used, but this is not enough. eppoll_entry->whead still points to the memory we are going to free, ep_unregister_pollwait()->remove_wait_queue() is obviously unsafe. Change ep_poll_callback(POLLFREE) to set eppoll_entry->whead = NULL, change ep_unregister_pollwait() to check pwq->whead != NULL under rcu_read_lock() before remove_wait_queue(). We add the new helper, ep_remove_wait_queue(), for this. This works because sighand_cachep is SLAB_DESTROY_BY_RCU and because ->signalfd_wqh is initialized in sighand_ctor(), not in copy_sighand. ep_unregister_pollwait()->remove_wait_queue() can play with already freed and potentially reused ->sighand, but this is fine. This memory must have the valid ->signalfd_wqh until rcu_read_unlock(). Reported-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
commit d80e731e upstream. This patch is intentionally incomplete to simplify the review. It ignores ep_unregister_pollwait() which plays with the same wqh. See the next change. epoll assumes that the EPOLL_CTL_ADD'ed file controls everything f_op->poll() needs. In particular it assumes that the wait queue can't go away until eventpoll_release(). This is not true in case of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand which is not connected to the file. This patch adds the special event, POLLFREE, currently only for epoll. It expects that init_poll_funcptr()'ed hook should do the necessary cleanup. Perhaps it should be defined as EPOLLFREE in eventpoll. __cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if ->signalfd_wqh is not empty, we add the new signalfd_cleanup() helper. ep_poll_callback(POLLFREE) simply does list_del_init(task_list). This make this poll entry inconsistent, but we don't care. If you share epoll fd which contains our sigfd with another process you should blame yourself. signalfd is "really special". I simply do not know how we can define the "right" semantics if it used with epoll. The main problem is, epoll calls signalfd_poll() once to establish the connection with the wait queue, after that signalfd_poll(NULL) returns the different/inconsistent results depending on who does EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd has nothing to do with the file, it works with the current thread. In short: this patch is the hack which tries to fix the symptoms. It also assumes that nobody can take tasklist_lock under epoll locks, this seems to be true. Note: - we do not have wake_up_all_poll() but wake_up_poll() is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE. - signalfd_cleanup() uses POLLHUP along with POLLFREE, we need a couple of simple changes in eventpoll.c to make sure it can't be "lost". Reported-by:
-
Dan Carpenter authored
commit 48f8b641 upstream. The intent here was clearly to set result to true if the 0x40000000 flag was set. But instead there was a | vs & typo and we always set result to true. Artem: check the spec at wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf and this fix looks correct. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Nikola Pajkovsky authored
commit 68766a2e upstream. In case we detect a problem and bail out, we fail to set "ret" to a nonzero value, and udf_load_logicalvol will mistakenly report success. Signed-off-by:
Nikola Pajkovsky <npajkovs@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 1df2ae31 upstream. Add sanity checks when loading sparing table from disk to avoid accessing unallocated memory or writing to it. Signed-off-by:
-
Paul E. McKenney authored
commit 3d3eeb2e upstream. The invocation of softirq is now handled by irq_exit(), so there is no need for sparc64 to invoke it on the trap-return path. In fact, doing so is a bug because if the trap occurred in the idle loop, this invocation can result in lockdep-RCU failures. The problem is that RCU ignores idle CPUs, and the sparc64 trap-return path to the softirq handlers fails to tell RCU that the CPU must be considered non-idle while those handlers are executing. This means that RCU is ignoring any RCU read-side critical sections in those handlers, which in turn means that RCU-protected data can be yanked out from under those read-side critical sections. The shiny new lockdep-RCU ability to detect RCU read-side critical sections that RCU is ignoring located this problem. The fix is straightforward: Make sparc64 stop manually invoking the softirq handlers. Reported-by:
Meelis Roos <mroos@linux.ee> Suggested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by:
-
Dan Carpenter authored
commit 8f0750f1 upstream. These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members so GDT_ENTRY_TLS_ENTRIES is one past the end of the array. Signed-off-by:
-
