Commit 80f8be7a ("tomoyo: Omit use of bin2c") removed the last
use of bin2c.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>

In the follow-up of commit fb3041d6 ("kbuild: fix SIGPIPE error
message for AR=gcc-ar and AR=llvm-ar"), Kees Cook pointed out that
tools should _not_ catch their own SIGPIPEs [1] [2].

Based on his feedback, LLVM was fixed [3].

However, Python's default behavior is to show noisy bracktrace when
SIGPIPE is sent. So, scripts written in Python are basically in the
same situation as the buggy llvm tools.

Example:

  $ make -s allnoconfig
  $ make -s allmodconfig
  $ scripts/diffconfig .config.old .config | head -n1
  -ALIX n
  Traceback (most recent call last):
    File "/home/masahiro/linux/scripts/diffconfig", line 132, in <module>
      main()
    File "/home/masahiro/linux/scripts/diffconfig", line 130, in main
      print_config("+", config, None, b[config])
    File "/home/masahiro/linux/scripts/diffconfig", line 64, in print_config
      print("+%s %s" % (config, new_value))
  BrokenPipeError: [Errno 32] Broken pipe

Python documentation [4] notes how to make scripts die immediately and
silently:

  """
  Piping output of your program to tools like head(1) will cause a
  SIGPIPE signal to be sent to your process when the receiver of its
  standard output closes early. This results in an exception like
  BrokenPipeError: [Errno 32] Broken pipe. To handle this case,
  wrap your entry point to catch this exception as follows:

    import os
    import sys

    def main():
        try:
            # simulate large output (your code replaces this loop)
            for x in range(10000):
                print("y")
            # flush output here to force SIGPIPE to be triggered
            # while inside this try block.
            sys.stdout.flush()
        except BrokenPipeError:
            # Python flushes standard streams on exit; redirect remaining output
            # to devnull to avoid another BrokenPipeError at shutdown
            devnull = os.open(os.devnull, os.O_WRONLY)
            os.dup2(devnull, sys.stdout.fileno())
            sys.exit(1)  # Python exits with error code 1 on EPIPE

    if __name__ == '__main__':
        main()

  Do not set SIGPIPE’s disposition to SIG_DFL in order to avoid
  BrokenPipeError. Doing that would cause your program to exit
  unexpectedly whenever any socket connection is interrupted while
  your program is still writing to it.
  """

Currently, tools/perf/scripts/python/intel-pt-events.py seems to be the
only script that fixes the issue that way.

tools/perf/scripts/python/compaction-times.py uses another approach
signal.signal(signal.SIGPIPE, signal.SIG_DFL) but the Python
documentation clearly says "Don't do it".

I cannot fix all Python scripts since there are so many.
I fixed some in the scripts/ directory.

[1]: https://lore.kernel.org/all/202211161056.1B9611A@keescook/
[2]: https://github.com/llvm/llvm-project/issues/59037
[3]: https://github.com/llvm/llvm-project/commit/4787efa38066adb51e2c049499d25b3610c0877b
[4]: https://docs.python.org/3/library/signal.html#note-on-sigpipeSigned-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

This option masks all unused command line argument warnings, which can
hide potential issues, such as an architecture Makefile adding an
unsupported flag to KBUILD_AFLAGS or KBUILD_CFLAGS, which will cause all
as-option and cc-options to silently fail due to -Werror with no
indication as to why in the main kernel build.

Remove this flag so that warnings of this nature can be caught early and
obviously in a build.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Currently, these warnings are hidden with -Qunused-arguments in
KBUILD_CPPFLAGS. Once that option is removed, these warnings should be
turned into hard errors to make unconditionally added but unsupported
flags for the current compilation mode or target obvious due to a failed
build; otherwise, the warnings might just be ignored if the build log is
not checked.

Link: https://github.com/ClangBuiltLinux/linux/issues/1587Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:

  clang-16: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]

Similar to commit 84edc2ef ("selftest/fpu: avoid clang warning"),
just add this flag to GCC builds. Commit 0f0727d9 ("drm/amd/display:
readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP
routines") added '-msse2' to prevent clang from emitting software
floating point routines.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns while building objects in the purgatory folder:

  clang-16: error: argument unused during compilation: '-MD' [-Werror,-Wunused-command-line-argument]

'-MMD' is always passed to the preprocessor via c_flags, even when
KBUILD_CFLAGS is overridden in a folder, so clang complains the addition
of '-MD' will be unused. Remove '-MD' to clear up this warning, as it is
unnecessary with '-MMD'.

Additionally, '-c' is also unnecessary, remove it while in the area.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
points out that there is a linking phase flag added to CFLAGS, which
will only be used for compiling

  clang-16: error: argument unused during compilation: '-shared' [-Werror,-Wunused-command-line-argument]

'-shared' is already present in ldflags-y so it can just be dropped.

Fixes: 2b2a2584 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:

  clang-16: error: argument unused during compilation: '-s' [-Werror,-Wunused-command-line-argument]

The compiler's '-s' flag is a linking option (it is passed along to the
linker directly), which means it does nothing when the linker is not
invoked by the compiler. The kernel builds all .o files with '-c', which
stops the compilation pipeline before linking, so '-s' can be safely
dropped from KBUILD_AFLAGS_64.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:

  clang-16: error: argument unused during compilation: '-fno-stack-clash-protection' [-Werror,-Wunused-command-line-argument]

This warning happens because vgettimeofday-32.c gets its base CFLAGS
from the main kernel, which may contain flags that are only supported on
a 64-bit target but not a 32-bit one, which is the case here.
-fstack-clash-protection and its negation are only suppported by the
64-bit powerpc target but that flag is included in an invocation for a
32-bit powerpc target, so clang points out that while the flag is one
that it recognizes, it is not actually used by this compiler job.

To eliminate the warning, remove -fno-stack-clash-protection from
vgettimeofday-32.c's CFLAGS when using clang, as has been done for other
flags previously.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, there
are several warnings in the PowerPC vDSO:

  clang-16: error: -Wl,-soname=linux-vdso32.so.1: 'linker' input unused [-Werror,-Wunused-command-line-argument]
  clang-16: error: -Wl,--hash-style=both: 'linker' input unused [-Werror,-Wunused-command-line-argument]
  clang-16: error: argument unused during compilation: '-shared' [-Werror,-Wunused-command-line-argument]

  clang-16: error: argument unused during compilation: '-nostdinc' [-Werror,-Wunused-command-line-argument]
  clang-16: error: argument unused during compilation: '-Wa,-maltivec' [-Werror,-Wunused-command-line-argument]

The first group of warnings point out that linker flags were being added
to all invocations of $(CC), even though they will only be used during
the final vDSO link. Move those flags to ldflags-y.

The second group of warnings are compiler or assembler flags that will
be unused during linking. Filter them out from KBUILD_CFLAGS so that
they are not used during linking.

Additionally, '-z noexecstack' was added directly to the ld_and_check
rule in commit 1d53c019 ("powerpc/vdso: link with -z noexecstack")
but now that there is a common ldflags variable, it can be moved there.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:

  clang-16: error: argument unused during compilation: '-s' [-Werror,-Wunused-command-line-argument]

The compiler's '-s' flag is a linking option (it is passed along to the
linker directly), which means it does nothing when the linker is not
invoked by the compiler. The kernel builds all .o files with '-c', which
stops the compilation pipeline before linking, so '-s' can be safely
dropped from ASFLAGS.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
points out that KBUILD_AFLAGS contains a linker flag, which will be
unused:

  clang: error: -Wl,-a32: 'linker' input unused [-Werror,-Wunused-command-line-argument]

This was likely supposed to be '-Wa,-a$(BITS)'. However, this change is
unnecessary, as all supported versions of clang and gcc will pass '-a64'
or '-a32' to GNU as based on the value of '-m'; the behavior of the
latest stable release of the oldest supported major version of each
compiler is shown below and each compiler's latest release exhibits the
same behavior (GCC 12.2.0 and Clang 15.0.6).

  $ powerpc64-linux-gcc --version | head -1
  powerpc64-linux-gcc (GCC) 5.5.0

  $ powerpc64-linux-gcc -m64 -### -x assembler-with-cpp -c -o /dev/null /dev/null &| grep 'as '
  .../as -a64 -mppc64 -many -mbig -o /dev/null /tmp/cctwuBzZ.s

  $ powerpc64-linux-gcc -m32 -### -x assembler-with-cpp -c -o /dev/null /dev/null &| grep 'as '
  .../as -a32 -mppc -many -mbig -o /dev/null /tmp/ccaZP4mF.sg

  $ clang --version | head -1
  Ubuntu clang version 11.1.0-++20211011094159+1fdec59bffc1-1~exp1~20211011214622.5

  $ clang --target=powerpc64-linux-gnu -fno-integrated-as -m64 -### \
    -x assembler-with-cpp -c -o /dev/null /dev/null &| grep gnu-as
   "/usr/bin/powerpc64-linux-gnu-as" "-a64" "-mppc64" "-many" "-o" "/dev/null" "/tmp/null-80267c.s"

  $ clang --target=powerpc64-linux-gnu -fno-integrated-as -m64 -### \
    -x assembler-with-cpp -c -o /dev/null /dev/null &| grep gnu-as
   "/usr/bin/powerpc64-linux-gnu-as" "-a32" "-mppc" "-many" "-o" "/dev/null" "/tmp/null-ab8f8d.s"

Remove this flag altogether to avoid future issues.

Fixes: 1421dc6d ("powerpc/kbuild: Use flags variables rather than overriding LD/CC/AS")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.

Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.

Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.

Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.

[nathan: Reworded and expanded on problems in commit message
         Use '-x assembler-with-cpp' in a couple more places]

Link: https://github.com/ClangBuiltLinux/linux/issues/1699Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

A future change will switch as-option to use KBUILD_AFLAGS instead of
KBUILD_CFLAGS to allow clang to drop -Qunused-arguments, which may cause
issues if the flag being tested requires a flag previously added to
KBUILD_CFLAGS but not KBUILD_AFLAGS. Use cc-option for cflags additions
so that the flags are tested properly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

-Wa,-msoft-float is tested with as-option, which will be a problem for
clang with an upcoming change to move as-option to use KBUILD_AFLAGS
instead of KBUILD_CFLAGS due to a lack of '-mno-abicalls' in
KBUILD_AFLAGS at the point that this check occurs; $(cflags-y) is added
to KBUILD_AFLAGS towards the end of this file.

  clang: error: ignoring '-fno-PIE' option as it cannot be used with implicit usage of -mabicalls and the N64 ABI [-Werror,-Woption-ignored]

This could be resolved by switching to a cc-option check but
'$(cflags-y)' would need to be added so that '-mno-abicalls' is present
for the test. However, this check is no longer necessary, as
-msoft-float is supported by all supported assembler versions (GNU as
2.25+ and LLVM 11+). Eliminate GAS_HAS_SET_HARDFLOAT and all of its
uses, inlining SET_HARDFLOAT where necessary.

Link: https://lore.kernel.org/202209101939.bvk64Fok-lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

as-option tests new options using KBUILD_CFLAGS, which causes problems
when using as-option to update KBUILD_AFLAGS because many compiler
options are not valid assembler options.

This will be fixed in a follow up patch. Before doing so, move the
assembler test for -Wa,-mrelax-relocations=no from using as-option to
cc-option.

Link: https://lore.kernel.org/llvm/CAK7LNATcHt7GcXZ=jMszyH=+M_LC9Qr6yeAGRCBbE6xriLxtUQ@mail.gmail.com/Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If the kheaders archive generation is interrupted then this directory
may be left on disk and not ignored by git.
By using the standard naming schema for temporary files and directories
the default .gitignore and "make clean" rules will apply.
Suggested-by: Nicolas Schier <nicolas@fjasle.eu>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Reuse the standard naming schema for temporary files also for temporary
directories.

Such a directory will be used by the kheaders generation.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Adding any rst quoting seems to be controversial, but at least try to
unify the existing quoting a bit, without adding new ones.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the leading whitespaces, and clean up indentation and whitespace
in general.

Although the diff looks massive, it's trivial with 'diff -w' or 'git
show -w'.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Drop the manually updated section numbering. It's hard to maintain, and
indeed hasn't been updated when sections 3.4 and 7.8 were dropped.

Update all the section references to rst references.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is not something that should be manually updated.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The "Kbuild syntax for exported headers" section should not be under
"Architecture Makefiles" in hierarchy. Bump the header underline from
"-" to "=".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The MAINTAINERS repository entry specifies "kconfig" as the branch, but
the repository itself has "kbuild".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

$(tmp-target) is a better fit for local use like this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

scripts/ is a better place to generate files used treewide.

With target.json moved to scripts/, you do not need to add target.json
to no-clean-files or MRPROPER_FILES.

'make clean' does not visit scripts/, but 'make mrproper' does.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

fixdep is designed only for parsing text files. read_file() appends
a terminating null byte ('\0') and parse_config_file() calls strstr()
to search for CONFIG options.

rustc outputs *.rlib, *.rmeta, *.so to dep-info. fixdep needs them in
the dependency, but there is no point in parsing such binary files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

The dep files (*.d files) emitted by C compilers usually contain the
deduplicated list of included files.

One exceptional case is when a header is included by the -include
command line option, and also by #include directive.

For example, the top Makefile adds the command line option,
"-include $(srctree)/include/linux/kconfig.h". You do not need to
include <linux/kconfig.h> in every source file.

In fact, include/linux/kconfig.h is listed twice in many .*.cmd files
due to include/linux/xarray.h having "#include <linux/kconfig.h>".
I did not fix that since it is a small redundancy.

However, this is more annoying for rustc. rustc emits the dependency
for each emission type.

For example, cmd_rustc_library emits dep-info, obj, and metadata.
So, the emitted *.d file contains the dependency for those 3 targets,
which makes fixdep parse the same file 3 times.

  $ grep rust/alloc/raw_vec.rs rust/.alloc.o.cmd
    rust/alloc/raw_vec.rs \
    rust/alloc/raw_vec.rs \
    rust/alloc/raw_vec.rs \

To skip the second parsing, this commit adds a hash table for parsed
files, just like we did for CONFIG options.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>

Change the hash table code so it will be easier to add the second table.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

rustc may put comments in dep-info, so sed is used to drop them before
passing it to fixdep.

Now that fixdep can remove comments, Makefiles do not need to run sed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>

fixdep parses dependency files (*.d) emitted by the compiler.

*.d files are Makefiles describing the dependencies of the main source
file.

fixdep understands minimal Makefile syntax. It works well enough for
GCC and Clang, but not for rustc.

This commit improves the parser a little more for better processing
comments, escape sequences, etc.

My main motivation is to drop comments. rustc may output comments
(e.g. env-dep). Currentyly, rustc build rules invoke sed to remove
comments, but it is more efficient to do it in fixdep.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

In Kbuild, two different rules must not write to the same file, but
it happens when compiling rust source files.

For example, set CONFIG_SAMPLE_RUST_MINIMAL=m and run the following:

  $ make -j$(nproc) samples/rust/rust_minimal.o samples/rust/rust_minimal.rsi \
                    samples/rust/rust_minimal.s samples/rust/rust_minimal.ll
    [snip]
    RUSTC [M] samples/rust/rust_minimal.o
    RUSTC [M] samples/rust/rust_minimal.rsi
    RUSTC [M] samples/rust/rust_minimal.s
    RUSTC [M] samples/rust/rust_minimal.ll
  mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
  make[3]: *** [scripts/Makefile.build:334: samples/rust/rust_minimal.ll] Error 1
  make[3]: *** Waiting for unfinished jobs....
  mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
  make[3]: *** [scripts/Makefile.build:309: samples/rust/rust_minimal.o] Error 1
  mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
  make[3]: *** [scripts/Makefile.build:326: samples/rust/rust_minimal.s] Error 1
  make[2]: *** [scripts/Makefile.build:504: samples/rust] Error 2
  make[1]: *** [scripts/Makefile.build:504: samples] Error 2
  make: *** [Makefile:2008: .] Error 2

The reason for the error is that 4 threads running in parallel renames
the same file, samples/rust/rust_minimal.d.

This does not happen when compiling C or assembly files because
-Wp,-MMD,$(depfile) explicitly specifies the dependency filepath.
$(depfile) is a unique path for each target.

Currently, rustc is only given --out-dir and --emit=<list-of-types>
So, all the rust build rules output the dep-info into the default
<CRATE_NAME>.d, which causes the path conflict.

Fortunately, the --emit option is able to specify the output path
individually, with the form --emit=<type>=<path>.

Add --emit=dep-info=$(depfile) to the common part. Also, remove the
redundant --out-dir because the output path is specified for each type.

The code gets much cleaner because we do not need to rename *.d files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>

Remove _host*_flags. No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

cmd_dt_S_dtb and cmd_dt_S_dtbo are almost the same; the only difference
is the prefix of the begin/end symbols. (__dtb vs __dtbo)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

The cmd-check for KBUILD_NOCMDDEP=1 may not be clear until you see
commit c4d5ee13 ("kbuild: make KBUILD_NOCMDDEP=1 handle empty
built-in.o").

When a phony target (i.e. FORCE) is the only prerequisite, Kbuild
uses a tricky way to detect that the target does not exist.

Add more comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

The cmd-check macro compares $(cmd_$@) and $(cmd_$1), but a pitfall is
that you cannot use cmd_<target> as the variable name for the command.

For example, the following code will not work in the top Makefile
or ./Kbuild.

    quiet_cmd_foo = GEN     $@
          cmd_foo = touch $@

    targets += foo
    foo: FORCE
            $(call if_changed,foo)

In this case, both $@ and $1 are expanded to 'foo', so $(cmd_check)
is always empty.

We do not need to use the same prefix for cmd_$@ and cmd_$1.
Rename the former to savedcmd_$@.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

The top .gitignore comments about how to detect files breaking
.gitignore rules, but people rarely care about it.

Add a new W=1 warning to detect files that are tracked but ignored by
git. If git is not installed or the source tree is not tracked by git
at all, this script does not print anything.

Running it on v6.2-rc1 detected the following:

  $ make W=1 misc-check
  Documentation/devicetree/bindings/.yamllint: warning: ignored by one of the .gitignore files
  drivers/clk/.kunitconfig: warning: ignored by one of the .gitignore files
  drivers/gpu/drm/tests/.kunitconfig: warning: ignored by one of the .gitignore files
  drivers/hid/.kunitconfig: warning: ignored by one of the .gitignore files
  fs/ext4/.kunitconfig: warning: ignored by one of the .gitignore files
  fs/fat/.kunitconfig: warning: ignored by one of the .gitignore files
  kernel/kcsan/.kunitconfig: warning: ignored by one of the .gitignore files
  lib/kunit/.kunitconfig: warning: ignored by one of the .gitignore files
  mm/kfence/.kunitconfig: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/.gitignore: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/Makefile: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/run_tags_test.sh: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/tags_test.c: warning: ignored by one of the .gitignore files

These are ignored by the '.*' or 'tags' in the top .gitignore, but
there is no rule to negate it.

You might be tempted to do 'git add -f' but I want to have the real
issue fixed (by fixing a .gitignore, or by renaming files, etc.).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Recent git versions do not accept the noted command.

  $ git ls-files -i --exclude-standard
  fatal: ls-files -i must be used with either -o or -c

The -c was implied before, but we need to make it explicit since
git commit b338e9f66873 ("ls-files: error out on -i unless -o or -c
are specified").

Also, replace --exclude-standard with --exclude-per-directory=.gitignore
so that everyone will get consistent results.

git-ls-files(1) says:

  --exclude-standard
      Add the standard Git exclusions: .git/info/exclude, .gitignore in
      each directory, and the user's global exclusion file.

We cannot predict what is locally added to .git/info/exclude or the
user's global exclusion file.

We can only manage .gitignore files committed to the repository.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>

More than one year has passed since the copied *.[cS] files were
removed from arch/*/boot/compressed/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The top Makefile sets KBUILD_VERBOSE to 0 by default, it looks weird
now because V=1 and V=2 can be OR'ed as V=12. The default should be
empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>