Newer Lenovo laptops seem to use the KBLC symbol to control the backlight
Add support for handling the keyboard backlight on these devices
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Link: https://lore.kernel.org/r/20230827161940.485200-1-stuart.a.hayhurst@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

on x86_64:

CONFIG_SUSPEND is not set
CONFIG_PM is not set

this leads to build failure of the AMD PMC driver. Add a 'depends on'
in the Kconfig.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/lkml/5181685c-29d8-22a4-a2d7-682f26e2e031@infradead.org/Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230826161213.3180194-1-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.

This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.

Add the missing cleanup path.

Fixes: 33c9ab5b ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

While it's pretty much theoretical to be otherwise, make sure
that P2SB is selected only for X86. This is idiomatic dependency
which is used by all others who select it. Use it for Simatic
as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230822141859.2139630-1-andriy.shevchenko@linux.intel.comAcked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The P2SB is used purely as a library and all users must select it with

	depends on PCI
	select P2SB if X86

statement. Without this the combination of different configuration
options may lead to build failures.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230822142514.2140897-1-andriy.shevchenko@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add documentation for the new attributes:
- CPLD versioning: "cpld5_pn", "cpld5_version", "cpld5_version_min".
- JTAG capability: "jtag_cap", indicating the available method of
  CPLD/FPGA devices field update.
- System lid status: "lid_open".
- Reset caused by long press of power button: "reset_long_pwr_pb".
- Reset caused by switch board DC-DC converter device failure:
  "reset_swb_dc_dc_pwr_fail".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-17-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Define the exact i2c bus (adapter number) of fans on the SN2201 system.
This will cause fan's EEPROMs be connected already from nvsw-sn2201
platform driver and not from user space after receiving udev events.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-16-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Allow processing of notification callback in routine
mlxreg_hotplug_device_create() in case hotplug object is configured
with action "MLXREG_HOTPLUG_DEVICE_NO_ACTION" in case no I2C parent bus
is specified.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-15-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Extend driver to support logic implemented by FPGA device connected
through PCIe bus.

The motivation two support new generation of Nvidia COME module
equipped with Lattice LFD2NX-40 FPGA device.

In order to support new Nvidia COME module FPGA device driver
initialization flow is modified. In case FPGA device is detected,
system resources are to be mapped to this device, otherwise system
resources are to be mapped same as it has been done before for Lattice
LPC based CPLD.

FPGA device is associated with three PCIe devices:
- PCIe-LPC bridge for main register space access.
- PCIe-I2C bridge for I2C controller access.
- PCIe-JTAG bridge for JTAG access.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-14-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add support for getting system interrupt line from ACPI table.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-13-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Introduce support for ACPI initialization flow - add ACPI match hook.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-12-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Currently driver is activated through DMI hooks.
Prepare driver to allow activation also through ACPI trigger.

Modify mlxplat_init()/mlxplat_exit() routines.
Add mlxplat_probe()/mlxplat_remove() routines and "mlxplat_driver"
structure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-11-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

On L1 switches reset should include special actions against CPLD device
for performing graceful operations.
For that purpose, special PLATFORM_RESET# signal should be indicated.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-10-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix routines and labels names by s/topolgy/topology.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-9-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Extend platform power off callback with kernel_halt() call.

When powering off, the process involves setting a halt bit in the
register space, which is then activated after a certain delay and
power off auxiliary power. By invoking `kernel_halt()` within this
timeframe, the intention is to facilitate a clean system power-off
sequence.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-8-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Extend to support 5-th CPLD version, PN and minimal version registers.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-7-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Extend IO registers description for some system types with reset cause
attribute "reset_swb_dc_dc_pwr_fail" to indicate reset caused by switch
board DC-DC power failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-6-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Set explicitly hotplug event action for health and power signals for
L1 switch as "MLXREG_HOTPLUG_DEVICE_NO_ACTION" in order to allow
processing of notification callback even I2C parent bus is not
specified.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-5-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

For system of classes VMOD0005, VMOD0010:
- remove "reset_from_comex", since this cause doesn't define specific
  reason.
- add more specific reason "reset_sw_reset", which is set along with
  removed "reset_from_comex".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-4-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add new register to indicate the method of FPGA/CPLD field upgrade
supported on the specific system.
Currently two masks are available:
b00 - field upgrade through LPC gateway (new method introduced to
      accelerate field upgrade process).
b11 - field upgrade through CPU GPIO pins (old method).
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-3-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add new attribute:
"lid_open" - to indicate system intrusion detection.
"reset_long_pwr_pb" - to indicate that system has been reset due to
long press of power button.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-2-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

This patch extends the mlxbf-bootctl driver's sysfs entries
to support read and write access for the manufacturing (MFG)
fields in the board-level EEPROM.  The MFG fields are set
once during the board manufacturing phase, and then the MFG
fields are write-protected.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/20230821183939.3229-1-davthompson@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

With latest commits having PMC code spread across multiple files, it would
be easier to maintain them in a separate directory under amd/pmc.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230811112116.2279419-2-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge pdx86/fixes into pdx86/for-next because there are some
pdx86 patches pending for the next release which build on top
of some of the fixes.

rshim console does not show all entries of dmesg.

Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
Signed-off-by: Shih-Yi Chen <shihyic@nvidia.com>
Reviewed-by: Liming Sung <limings@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230821150627.26075-1-shihyic@nvidia.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Update steps how order list elements data and elements size are
evaluated.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230821144205.13529-1-jorge.lopez2@hp.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

After the addition of the mid fan custom curve functionality various
incorrect behaviour was uncovered. This commit fixes these areas.

- Ensure mid fan attributes actually use the correct fan ID
- Correction to a bit mask for selecting the correct fan data
- Refactor the curve show/store functions to be cleaner and
  match each others layout

Fixes: 536fce82 ("platform/x86: asus-wmi: add support for showing middle fan RPM")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230815014209.44903-1-luke@ljones.devSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

We have a common helper to represent a boolean value as "on"/"off"
string. Use it for the sake of the unified style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20230811131330.71263-1-andriy.shevchenko@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Use memdup_user_nul() helper instead of open-coding to simplify the code.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230810122012.2110410-1-ruanjinjie@huawei.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:

F9:    Has a symbol of a head with a headset, the manual says "Service key"
F10:   Has a symbol of a telephone horn which has been picked up from the
       receiver, the manual says: "Answer incoming calls"
F11:   Has a symbol of a telephone horn which is resting on the receiver,
       the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
       "Open the Windows 'Snipping' Tool app"

This commit adds support for these 4 new hkey events.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230819-lenovo_keys-v1-1-9d34eac88e0a@apitzsch.euReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

This adds my laptop Lenovo Yoga 7 14ACN6, with Product Name: 82N7
(from `dmidecode -t1 | grep "Product Name"`) to
the ec_trigger_quirk_dmi_table, have tested that this is required
for the YMC driver to work correctly on this model.
Signed-off-by: Swapnil Devesh <me@sidevesh.com>
Reviewed-by: Gergő Köteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/18a08a8b173.895ef3b250414.1213194126082324071@sidevesh.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The simatic-ipc driver no longer depends on PCI, but its watchdog portion
still needs it, otherwise P2SB runs into a build  failure:

WARNING: unmet direct dependencies detected for P2SB
  Depends on [n]: PCI [=n] && X86 [=y]
  Selected by [m]:
  - SIEMENS_SIMATIC_IPC_WDT [=m] && WATCHDOG [=y] && SIEMENS_SIMATIC_IPC [=y]

drivers/platform/x86/p2sb.c:121:3: error: call to undeclared function 'pci_bus_write_config_dword'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
                pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0);

Add back the minimum dependendency to make it build in random
configurations again.

Fixes: b72da71c ("platform/x86: simatic-ipc: drop PCI runtime depends and header")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814073924.1066390-1-arnd@kernel.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>

There are different IPC driver modules in the kernel that are actively
maintained by Siemens but not yet listed in the MAINTAINERS file.
Add the missing entries.
Signed-off-by: Gerd Haeussler <gerd.haeussler.ext@siemens.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814073114.2885-1-haeussler.gerd@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The lenovo-ymc driver is causing the keyboard + touchpad to stop working
on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9.

The problem is that there are YMC WMI GUID methods in the ACPI tables
of these laptops, despite them not being Yogas and lenovo-ymc loading
causes libinput to see a SW_TABLET_MODE switch with state 1.

This in turn causes libinput to ignore events from the builtin keyboard
and touchpad, since it filters those out for a Yoga in tablet mode.

Similar issues with false-positive SW_TABLET_MODE=1 reporting have
been seen with the intel-hid driver.

Copy the intel-hid driver approach to fix this and only bind to the WMI
device on machines where the DMI chassis-type indicates the machine
is a convertible.

Add a 'force' module parameter to allow overriding the chassis-type check
so that users can easily test if the YMC interface works on models which
report an unexpected chassis-type.

Fixes: e82882cd ("platform/x86: Add driver for Yoga Tablet Mode switch")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373
Cc: André Apitzsch <git@apitzsch.eu>
Cc: stable@vger.kernel.org
Tested-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Tested-by: Gergő Köteles <soyer@irl.hu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com

Move debug register offsets to different location due to hardware changes.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Use kernel_power_off() instead of kernel_halt() to pass through
machine_power_off() -> pm_power_off(), otherwise axillary power does
not go off.

Change "power down" bitmask.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Change polarity of chassis health and power signals and fix latch reset
mask for L1 switch.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix exit flow order: call mlxplat_post_exit() after
mlxplat_i2c_main_exit() in order to unregister main i2c driver before
to "mlxplat" driver.

Fixes: 0170f616 ("platform: mellanox: Split initialization procedure")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>