- 11 Jan, 2018 8 commits
-
-
Wei Yongjun authored
Fix to return error code -ENODEV from the of_phy_connect() error handling case instead of 0, as done elsewhere in this function. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
I ran into a randconfig build failure: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_probe': drivers/net/ethernet/socionext/netsec.c:1583:17: error: implicit declaration of function 'devm_ioremap'; did you mean 'ioremap'? [-Werror=implicit-function-declaration] Including linux/io.h directly fixes this. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-01-10 This series contains updates to i40e and i40evf only. Alice adds the displaying of priority xon/xoff packet stats, since we were already keeping track of them. Based on the recent changes, bump the driver versions. Jake changes how the driver determines whether or not the device is currently up to resolve the possible issue of freeing data structures and other memory before they have been fully allocated. Refactored the driver to simplify the locking behavior and to consistently use spinlocks instead of an overloaded bit lock to protect MAC and filter lists. Created a helper function which can convert the AdminQ link speed definition into a virtchnl definition. Colin Ian King cleans up a redundant variable initialization. Alex cleans up the driver to stop clearing the pending bit array for each vector manually, since it is prone to dropping an interrupt and based on the hardware specs, the pending bit array will be cleared automatically in MSI-X mode. Cleaned up flags for promiscuous mode to resolve an issue where enabling & disabling promiscuous mode on a VF would leave us in a high polling rate for the adminq task. Cleaned up code that was prone to race issues. Jingjing renames pipeline personalization profile (ppp) to dynamic device personalization (ddp) because it was being confused with the well known point to point protocol. Also removed checks for "track_id" being zero, since it is valid for it to be zero for profiles that do not have any 'write' commands. v2: cleaned up commit message for patch 12 based on feedback from Sergei Shtylyov and Alex Duyck v3: dropped patch 15 from the original series while Mariusz Stachura works on the changes that Jakub Kicinski has suggested ==================== Signed-off-by: -
Nathan Fontenot authored
Initiating a kdump via the command line can cause a pending interrupt to be handled by the ibmvnic driver when initializing the sub-CRQ irqs during driver initialization. NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic] LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 Call Trace: [c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 [c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90 [c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0 [c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250 [c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80 [c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0 [c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24 [c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120 [c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180 Signed-off-by: -
Ganesh Goudar authored
Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ganesh Goudar authored
add changes to t4_eth_xmit to enable vxlan segmentation offload support. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
Ganesh Goudar authored
Implement ndo_udp_tunnel_add and ndo_udp_tunnel_del to support vxlan tunnelling. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
Ganesh Goudar authored
Add data structures and macros to be used in vxlan offload. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
- 10 Jan, 2018 32 commits
-
-
David S. Miller authored
Edward Cree says: ==================== sfc: support 25G configuration with ethtool Adds support for advertise bits beyond the 32-bit legacy masks, and plumbs in translation of the new 25/50/100G bits to/from MCDI. ==================== Signed-off-by: -
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Store and handle ethtool link mode masks within the driver instead of just a single u32. However, quite a significant amount of existing code wants to manipulate the masks directly, and thus now uses the first unsigned long (i.e. mask[0]) as though it were a legacy u32 mask. This is ok because all the bits that code is interested in are in the first 32 bits of the mask; but it might be a good idea to change them in future to use the proper bitmap API. Signed-off-by:
-
Edward Cree authored
Only handles direct speed setting, not autoneg, because the driver is still trying to pretend it uses the legacy ethtool API which doesn't have advertised/supported bits for 25/50/100G. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw qdisc refactoring This patchset refactors the qdisc handling in mlxsw driver in order to make it more object oriented like. It helps readability, laying the groundwork for the offloading of additional qdiscs by the driver This patchset also makes the qdiscs statistics more generic. Patch 1 moves the qdiscs declaration to the spectrum_qdisc.c Patches 2-3 clean the offloaded stats requests. Patch 2 changes the RED generic stats struct to be sharable by other offloaded qdiscs. Patch 3 changes the xstats request to be like the stats. Note that these patches are outside the driver scope. Patches 4-5 clean the statistics related functions and structs within the driver. Patches 6-7 decrease the need for the same parameters to be sent to many functions. Patches 8-11 create a functions pointers struct, to make the qdiscs handling more object oriented like. ==================== Signed-off-by: -
Nogah Frankel authored
If a qdisc is being replaced by another qdisc of the same type, it can simply override over its configuration. However, if it replaces a qdisc of another type, it needs to be removed before setting the new qdisc. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Nogah Frankel authored
Create a generic qdisc replace function. For that goal, add three functions to the qdisc ops struct: * check_params: Checks if the given parameters are offloadable. * replace: Offload the given parameters. * clean_stats: clean the qdisc stats for the offloaded qdisc. integrate RED offloading into using the new internal replace API. Signed-off-by:
-
Nogah Frankel authored
Add a destroy function to the qdiscs ops struct. Create a generic qdisc destroy function, that clears the qdisc metadata as well as calling the specific qdisc destroy function. Signed-off-by:
-
Nogah Frankel authored
Qdisc struct have the Qdisc_class_ops struct. This patch introduces the similar ops struct for the mlxsw_sp_qdisc_ops struct. It allows better readability as well as code reusability for the common parts of some functions like destroy. The first operations to be added are the statistics getters. Signed-off-by:
-
Nogah Frankel authored
Every qdisc op gets the qdisc handle ID as well as its location. Each one of them, beside replace, checks if the handle doesn't match the qdisc in the given location, and if so, it returns without running the actual op. Unite these checks to one comparison function and avoid sending the handle id to these ops. Signed-off-by:
-
Nogah Frankel authored
Tclass number is needed for most of the operations related to the qdisc in the driver. Create a field for it in the mlxsw_sp_qdisc instead of passing it to every function as parameter. Signed-off-by:
-
Nogah Frankel authored
Improve readability by changing the clean stats function to handle only RED. Qdiscs that will be offloaded in the future will have a clean stats function of their own. Signed-off-by:
-
Nogah Frankel authored
Clean RED offloaded stats and make them more generic by breaking the generic qdisc stats to a struct of their own. Signed-off-by:
-
Nogah Frankel authored
Change the value of the xstats requested from the driver for offloaded RED to be incremental, like the normal stats. It increases consistency - if a qdisc stops being offloaded its xstats don't change. Signed-off-by:
-
Nogah Frankel authored
Change the name of the stats struct to be generic, so it could be used for other qdisc offload, that will be added in the next patches. Signed-off-by:
-
Nogah Frankel authored
Move all the qdisc related data from the spectrum.h to spectrum_qdisc.c. Create an init and fini functions for the qdiscs. Signed-off-by:
-
Ido Schimmel authored
Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/ipv4/tcp.c:1736:6: warning: symbol 'tcp_recv_timestamp' was not declared. Should it be static? Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the xdp_rxq_info_reg() error handling case instead of 0, as done elsewhere in this function. Fixes: 0ddf5432 ("xdp/mlx5: setup xdp_rxq_info") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Arjun Vynipadath authored
We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7b cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
-
Stephen Rothwell authored
Fixes: fc72d1d5 ("tuntap: XDP transmission") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jingjing Wu authored
track_id == 0 is valid for “read only” profiles when profile does not have any “write” commands. Signed-off-by:
Jingjing Wu <jingjing.wu@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jingjing Wu authored
PPP name was going to be confusing since PPP already means point to point protocol. It is decided to change pipeline personalization profile(ppp) to dynamic device personalization(ddp). Signed-off-by:
-
Alexander Duyck authored
Having the interrupts firing while we are polling causes extra overhead and isn't needed for most systems out there. If an interrupt is lost us experiencing a 2s latency spike before recovering is still not acceptable and masks the issue. We are better off just identifying systems that lose interrupts and instead enable workarounds for those systems. To that end I am dropping the code that was strobing the interrupts as there is a narrow window where having them enabled can actually cause race issues anyway where a few stray packets might get misses if the interrupt is re-enabled and fires before we call napi_complete. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Alexander Duyck authored
If you enabled and disabled promiscuous mode on a VF you could easily put it into a state where it would start firing interrupts on all queues at a rate of 50+ interrupts per second even though there was no traffic present. The issue seems to have been a stray admin queue feature flag set that was leaving us in a high polling rate for the adminq task. Signed-off-by:
-
Alexander Duyck authored
We should not be clearing the pending bit array for each vector manually. The documentation for the hardware states that when in MSI-X mode the pending bit array will be cleared automatically. Us clearing it ourselves just results in multiple opportunities for us to drop an interrupt. Signed-off-by:
-
Colin Ian King authored
Variable read_size is initialized and this value is never read, it is instead set inside the do-loop, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/net/ethernet/intel/i40e/i40e_nvm.c:390:6: warning: Value stored to 'read_size' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Alice Michael authored
Bump the i40e driver from 2.1.14 to 2.3.2. Bump the i40evf driver from 3.0.1 to 3.2.2 Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
-
Jacob Keller authored
We introduced the virtchnl interface in order to have an interface for talking to a virtual device driver which was host-driver agnostic. This interface has its own definitions, including one for link speed. The host driver has to talk to the virtchnl interface using these new definitions in order to remain compatible. Today, the i40e link_speed enumerations are value-exact matches for the virtchnl interface, so it was originally decided to simply use a typecast. However, this is unsafe, and makes it easier for future drivers to continue this unsafe practice. There is nothing guaranteeing these values are exact, and the type-cast would hide any compiler warning which indicates the problem. Rather than rely on this type cast, introduce a helper function which can convert the AdminQ link speed definition into a virtchnl definition. This can then be used by host driver implementations in order to safely convert to the interface recognized by the virtual functions. If the link speed is not able to be represented by the virtchnl definitions we'll report UNKNOWN which is the safest result. This will ensure that should the driver specific link_speeds actual bit definitions change, we do not report them incorrectly according to the VF. Additionally, this provides a better pattern for future drivers to copy, as it is more likely a future device may not use the exact same bit-wise definition as the current virtchnl interface. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Jacob Keller authored
We currently notify a VF of the link state after ENABLE_QUEUES, which is the last thing a VF does after being configured. Guests may not actually ENABLE_QUEUES until they get configured, and thus between driver load and device configuration the VF may show inaccurate link status. Fix this by also sending the link state after GET_VF_RESOURCES. Although we could remove the message following ENABLE_QUEUES, it's not that significant of a loss, so this patch just keeps both to ensure maximum compatibility with guests on various OSes. Specifically, without this patch guests running FreeBSD will display inaccurate link state until the device is brought up. This is mostly a cosmetic issue but can be confusing to system administrators. Signed-off-by:
-
Jacob Keller authored
If i40evf_open() is called quickly at the same time as a reset occurs (such as via ethtool) it is possible for the device to attempt to open while a reset is in progress. This occurs because the driver was not holding the critical task bit lock during i40evf_open, nor was it holding it around the call to i40evf_up_complete() in i40evf_reset_task(). We didn't hold the lock previously because calls to i40evf_down() would take the bit lock directly, and this would have caused a deadlock. To avoid this, we'll move the bit lock handling out of i40evf_down() and into the callers of this function. Additionally, we'll now hold the bit lock over the entire set of steps when going up or down, to ensure that we remain consistent. Ultimately this causes us to serialize the transitions between down and up properly, and avoid changing status while we're resetting. Signed-off-by:
-
Jacob Keller authored
Although not strictly necessary, it is customary to reverse the order in which we release locks that we acquire. This helps preserve lock ordering during future refactors, which can help avoid potential deadlock situations. Signed-off-by:
-
