Pull core dump fix from Al Viro:
 "Fix for multithreaded coredump playing fast and loose with getting
  registers of secondary threads; if a secondary gets caught in the
  middle of exit(2), the conditition it will be stopped in for dumper to
  examine might be unusual enough for things to go wrong.

  Quite a few architectures are fine with that, but some are not."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  don't dump the threads that had been already exiting when zapped.

Pull btrfs fixes from David Sterba:
 "A handful of minor fixes and updates:

   - handle missing device replace item on mount (syzbot report)

   - fix space reservation calculation when finishing relocation

   - fix memory leak on error path in ref-verify (debugging feature)

   - fix potential overflow during defrag on 32bit arches

   - minor code update to silence smatch warning

   - minor error message updates"

* tag 'for-5.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: ref-verify: fix memory leak in btrfs_ref_tree_mod
  btrfs: dev-replace: fail mount if we don't have replace item with target device
  btrfs: scrub: update message regarding read-only status
  btrfs: clean up NULL checks in qgroup_unreserve_range()
  btrfs: fix min reserved size calculation in merge_reloc_root
  btrfs: print the block rsv type when we fail our reservation
  btrfs: fix potential overflow in cluster_pages_for_defrag on 32bit arch

Pull fscrypt fix from Eric Biggers:
 "Fix a regression where a new WARN_ON() was reachable when using
  FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32 on ext4, causing xfstest
  generic/602 to sometimes fail on ext4"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: remove reachable WARN in fscrypt_setup_iv_ino_lblk_32_key()

Pull turbostat updates from Len Brown:
 "Update update to version 20.09.30, one kernel side fix"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: update version number
  powercap: restrict energy meter to root access
  tools/power turbostat: harden against cpu hotplug
  tools/power turbostat: adjust for temperature offset
  tools/power turbostat: Build with _FILE_OFFSET_BITS=64
  tools/power turbostat: Support AMD Family 19h
  tools/power turbostat: Remove empty columns for Jacobsville
  tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz.
  tools/power x86_energy_perf_policy: Input/output error in a VM
  tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabled
  tools/power turbostat: Support additional CPU model numbers
  tools/power turbostat: Fix output formatting for ACPI CST enumeration
  tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITY
  tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0
  tools/power turbostat: Enable accumulate RAPL display
  tools/power turbostat: Introduce functions to accumulate RAPL consumption
  tools/power turbostat: Make the energy variable to be 64 bit
  tools/power turbostat: Always print idle in the system configuration header
  tools/power turbostat: Print /dev/cpu_dma_latency

goodbye summer...
Signed-off-by: Len Brown <len.brown@intel.com>

Remove non-privileged user access to power data contained in
/sys/class/powercap/intel-rapl*/*/energy_uj

Non-privileged users currently have read access to power data and can
use this data to form a security attack. Some privileged
drivers/applications need read access to this data, but don't expose it
to non-privileged users.

For example, thermald uses this data to ensure that power management
works correctly. Thus removing non-privileged access is preferred over
completely disabling this power reporting capability with
CONFIG_INTEL_RAPL=n.

Fixes: 95677a9a ("PowerCap: Fix mode for energy counter")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org

Pull kvm fixes from Paolo Bonzini:
 "ARM:
   - fix compilation error when PMD and PUD are folded
   - fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1
   - add aarch64 get-reg-list test

  x86:
   - fix semantic conflict between two series merged for 5.10
   - fix (and test) enforcement of paravirtual cpuid features

  selftests:
   - various cleanups to memory management selftests
   - new selftests testcase for performance of dirty logging"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
  KVM: selftests: allow two iterations of dirty_log_perf_test
  KVM: selftests: Introduce the dirty log perf test
  KVM: selftests: Make the number of vcpus global
  KVM: selftests: Make the per vcpu memory size global
  KVM: selftests: Drop pointless vm_create wrapper
  KVM: selftests: Add wrfract to common guest code
  KVM: selftests: Simplify demand_paging_test with timespec_diff_now
  KVM: selftests: Remove address rounding in guest code
  KVM: selftests: Factor code out of demand_paging_test
  KVM: selftests: Use a single binary for dirty/clear log test
  KVM: selftests: Always clear dirty bitmap after iteration
  KVM: selftests: Add blessed SVE registers to get-reg-list
  KVM: selftests: Add aarch64 get-reg-list test
  selftests: kvm: test enforcement of paravirtual cpuid features
  selftests: kvm: Add exception handling to selftests
  selftests: kvm: Clear uc so UCALL_NONE is being properly reported
  selftests: kvm: Fix the segment descriptor layout to match the actual layout
  KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs
  kvm: x86: request masterclock update any time guest uses different msr
  kvm: x86: ensure pv_cpuid.features is initialized when enabling cap
  ...

Pull nfsd fixes from Bruce Fields:
 "This is mainly server-to-server copy and fallout from Chuck's 5.10 rpc
  refactoring"

* tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linux:
  net/sunrpc: fix useless comparison in proc_do_xprt()
  net/sunrpc: return 0 on attempt to write to "transports"
  NFSD: fix missing refcount in nfsd4_copy by nfsd4_do_async_copy
  NFSD: Fix use-after-free warning when doing inter-server copy
  NFSD: MKNOD should return NFSERR_BADTYPE instead of NFSERR_INVAL
  SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow()
  NFSD: NFSv3 PATHCONF Reply is improperly formed

Pull ext4 fixes and cleanups from Ted Ts'o:
 "More fixes and cleanups for the new fast_commit features, but also a
  few other miscellaneous bug fixes and a cleanup for the MAINTAINERS
  file"

* tag 'ext4_for_linus_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (28 commits)
  jbd2: fix up sparse warnings in checkpoint code
  ext4: fix sparse warnings in fast_commit code
  ext4: cleanup fast commit mount options
  jbd2: don't start fast commit on aborted journal
  ext4: make s_mount_flags modifications atomic
  ext4: issue fsdev cache flush before starting fast commit
  ext4: disable fast commit with data journalling
  ext4: fix inode dirty check in case of fast commits
  ext4: remove unnecessary fast commit calls from ext4_file_mmap
  ext4: mark buf dirty before submitting fast commit buffer
  ext4: fix code documentatioon
  ext4: dedpulicate the code to wait on inode that's being committed
  jbd2: don't read journal->j_commit_sequence without taking a lock
  jbd2: don't touch buffer state until it is filled
  jbd2: add todo for a fast commit performance optimization
  jbd2: don't pass tid to jbd2_fc_end_commit_fallback()
  jbd2: don't use state lock during commit path
  jbd2: drop jbd2_fc_init documentation
  ext4: clean up the JBD2 API that initializes fast commits
  jbd2: rename j_maxlen to j_total_len and add jbd2_journal_max_txn_bufs
  ...

Pull erofs fixes from Gao Xiang:
 "A week ago, Vladimir reported an issue that the kernel log would
  become polluted if the page allocation debug option is enabled. I also
  found this when I cleaned up magical page->mapping and originally
  planned to submit these all for 5.11 but it seems the impact can be
  noticed so submit the fix in advance.

  In addition, nl6720 also reported that atime is empty although EROFS
  has the only one on-disk timestamp as a practical consideration for
  now but it's better to derive it as what we did for the other
  timestamps.

  Summary:

   - fix setting up pcluster improperly for temporary pages

   - derive atime instead of leaving it empty"

* tag 'erofs-for-5.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix setting up pcluster for temporary pages
  erofs: derive atime instead of leaving it empty

Even though one iteration is not enough for the dirty log performance
test (due to the cost of building page tables, zeroing memory etc.)
two is okay and it is the default.  Without this patch,
"./dirty_log_perf_test" without any further arguments fails.

Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In the original code, the "if (*lenp < 0)" check didn't work because
"*lenp" is unsigned.  Fortunately, the memory_read_from_buffer() call
will never fail in this context so it doesn't affect runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Merge tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core documentation fixes from Greg KH:
 "Some small Documentation fixes that were fallout from the larger
  documentation update we did in 5.10-rc2.

  Nothing major here at all, but all of these have been in linux-next
  and resolve build warnings when building the documentation files"

* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: remove mic/index from misc-devices/index.rst
  scripts: get_api.pl: Add sub-titles to ABI output
  scripts: get_abi.pl: Don't let ABI files to create subtitles
  docs: leds: index.rst: add a missing file
  docs: ABI: sysfs-class-net: fix a typo
  docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys

Pull tty/serial fixes from Greg KH:
 "Here are a small number of small tty and serial fixes for some
  reported problems for the tty core, vt code, and some serial drivers.

  They include fixes for:

   - a buggy and obsolete vt font ioctl removal

   - 8250_mtk serial baudrate runtime warnings

   - imx serial earlycon build configuration fix

   - txx9 serial driver error path cleanup issues

   - tty core fix in release_tty that can be triggered by trying to bind
     an invalid serial port name to a speakup console device

  Almost all of these have been in linux-next without any problems, the
  only one that hasn't, just deletes code :)"

* tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Disable KD_FONT_OP_COPY
  tty: fix crash in release_tty if tty->port is not set
  serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init
  tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled
  serial: 8250_mtk: Fix uart_get_baud_rate warning

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids:

   - USB gadget fixes for some reported issues

   - Fixes for the ever-troublesome apple fastcharge driver, hopefully
     we finally have it right.

   - More USB core quirks for odd devices

   - USB serial driver fixes for some long-standing issues that were
     recently found

   - some new USB serial driver device ids

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property
  usb: mtu3: fix panic in mtu3_gadget_stop()
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: Add NO_LPM quirk for Kingston flash drive
  USB: serial: option: add Quectel EC200T module support
  usb: raw-gadget: fix memory leak in gadget_setup
  usb: dwc2: Avoid leaving the error_debugfs label unused
  usb: dwc3: ep0: Fix delay status handling
  usb: gadget: fsl: fix null pointer checking
  usb: gadget: goku_udc: fix potential crashes in probe
  usb: dwc3: pci: add support for the Intel Alder Lake-S

current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.

Move the assignment inside tasklist_lock to avoid the race.
Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's buggy:

On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ).  The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use  KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.

Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
  and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
  not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016

Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken

https://github.com/systemd/systemd/pull/3651

So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.

Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.

Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:

	/* copy font from active VT, where the font was uploaded to */
	cfo.op = KD_FONT_OP_COPY;
	cfo.height = vcs.v_active-1; /* tty1 == index 0 */
	(void) ioctl(vcfd, KDFONTOP, &cfo);

Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.

v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.chSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull xfs fixes from Darrick Wong:

 - Fix an uninitialized struct problem

 - Fix an iomap problem zeroing unwritten EOF blocks

 - Fix some clumsy error handling when writeback fails on filesystems
   with blocksize < pagesize

 - Fix a retry loop not resetting loop variables properly

 - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
   actually does permit that combination

 - Fix excessive page cache flushing when unsharing part of a file

* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: only flush the unshared range in xfs_reflink_unshare
  xfs: fix scrub flagging rtinherit even if there is no rt device
  xfs: fix missing CoW blocks writeback conversion retry
  iomap: clean up writeback state logic on writepage error
  iomap: support partial page discard on writeback block mapping failure
  xfs: flush new eof page on truncate to avoid post-eof corruption
  xfs: set xefi_discard when creating a deferred agfl free log intent item

Merge procfs splice read fixes from Christoph Hellwig:
 "Greg reported a problem due to the fact that Android tests use procfs
  files to test splice, which stopped working with the changes for
  set_fs() removal.

  This series adds read_iter support for seq_file, and uses those for
  various proc files using seq_file to restore splice read support"

[ Side note: Christoph initially had a scripted "move everything over"
  patch, which looks fine, but I personally would prefer us to actively
  discourage splice() on random files.  So this does just the minimal
  basic core set of proc file op conversions.

  For completeness, and in case people care, that script was

     sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g'

  but I'll wait and see if somebody has a strong argument for using
  splice on random small /proc files before I'd run it on the whole
  kernel.   - Linus ]

* emailed patches from Christoph Hellwig <hch@lst.de>:
  proc "seq files": switch to ->read_iter
  proc "single files": switch to ->read_iter
  proc/stat: switch to ->read_iter
  proc/cpuinfo: switch to ->read_iter
  proc: wire up generic_file_splice_read for iter ops
  seq_file: add seq_read_iter

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a
     combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs
     integrated assembler upset

   - Correct the mitigation selection logic which prevented the related
     prctl to work correctly

   - Make the UV5 hubless system work correctly by fixing up the
     malformed table entries and adding the missing ones"

* tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Recognize UV5 hubless system identifier
  x86/platform/uv: Remove spaces from OEM IDs
  x86/platform/uv: Fix missing OEM_TABLE_ID
  x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP
  x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S

Pull perf fix from Thomas Gleixner:
 "A single fix for the perf core plugging a memory leak in the address
  filter parser"

* tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix a memory leak in perf_event_parse_addr_filter()

Pull futex fix from Thomas Gleixner:
 "A single fix for the futex code where an intermediate state in the
  underlying RT mutex was not handled correctly and triggering a BUG()
  instead of treating it as another variant of retry condition"

* tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle transient "ownerless" rtmutex state correctly

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Fix the fallout of the IPI as interrupt conversion in Kconfig and
     the BCM2836 interrupt chip driver

   - Fixes for interrupt affinity setting and the handling of
     hierarchical irq domains in the SiFive PLIC driver

   - Make the unmapped event handling in the TI SCI driver work
     correctly

   - A few minor fixes and cleanups in various chip drivers and Kconfig"

* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
  irqchip/ti-sci-inta: Add support for unmapped event handling
  dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
  irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
  irqchip/sifive-plic: Fix chip_data access within a hierarchy
  irqchip/sifive-plic: Fix broken irq_set_affinity() callback
  irqchip/stm32-exti: Add all LP timer exti direct events support
  irqchip/bcm2836: Fix missing __init annotation
  irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
  irqchip/mst: Make mst_intc_of_init static
  irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
  genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY

Pull entry code fix from Thomas Gleixner:
 "A single fix for the generic entry code to correct the wrong
  assumption that the lockdep interrupt state needs not to be
  established before calling the RCU check"

* tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix the incorrect ordering of lockdep and RCU check

Pull powerpc fixes from Michael Ellerman:

 - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user()

 - fix for an RCU splat at boot caused by a recent lockdep change

 - fix for a possible deadlock in our EEH debugfs code

 - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms

 - build fix when CONFIG_NUMA=n

Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai,
and Scott Cheloha.

* tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/numa: Fix build when CONFIG_NUMA=n
  powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
  powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
  powerpc/40x: Always fault when _PAGE_ACCESSED is not set
  powerpc/603: Always fault when _PAGE_ACCESSED is not set
  powerpc: Use asm_goto_volatile for put_user()
  powerpc/smp: Call rcu_cpu_starting() earlier
  powerpc/eeh_cache: Fix a possible debugfs deadlock

The dirty log perf test will time verious dirty logging operations
(enabling dirty logging, dirtying memory, getting the dirty log,
clearing the dirty log, and disabling dirty logging) in order to
quantify dirty logging performance. This test can be used to inform
future performance improvements to KVM's dirty logging infrastructure.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We also check the input number of vcpus against the maximum supported.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-8-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-7-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Rounding the address the guest writes to a host page boundary
will only have an effect if the host page size is larger than the guest
page size, but in that case the guest write would still go to the same
host page. There's no reason to round the address down, so remove the
rounding to simplify the demand paging test.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.

No functional change expected.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test.  It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.

The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012233.6013-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG
would overwrite it the next time it copies the dirty log onto it.
In the upcoming dirty ring tests we'll start to fetch dirty pages from
a ring buffer, so no one is going to clear the dirty bitmap for us.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012228.5916-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Check for KVM_GET_REG_LIST regressions. The blessed list was
created by running on v4.15 with the --core-reg-fixup option.
The following script was also used in order to annotate system
registers with their names when possible. When new system
registers are added the names can just be added manually using
the same grep.

while read reg; do
	if [[ ! $reg =~ ARM64_SYS_REG ]]; then
		printf "\t$reg\n"
		continue
	fi
	encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//")
	if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then
		printf "\t$reg\n"
		continue
	fi
	name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//")
	printf "\t$reg\t/* $name */\n"
done < <(aarch64/get-reg-list --core-reg-fixup --list)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.

Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201027231044.655110-7-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>