1. 06 Apr, 2017 1 commit
  2. 05 Apr, 2017 1 commit
  3. 04 Apr, 2017 6 commits
  4. 03 Apr, 2017 3 commits
  5. 02 Apr, 2017 7 commits
    • David S. Miller's avatar
      Merge branch 'l2tp_session_find-fixes' · e5c1e519
      David S. Miller authored
      Guillaume Nault says:
      
      ====================
      l2tp: fix usage of l2tp_session_find()
      
      l2tp_session_find() doesn't take a reference on the session returned to
      its caller. Virtually all l2tp_session_find() users are racy, either
      because the session can disappear from under them or because they take
      a reference too late. This leads to bugs like 'use after free' or
      failure to notice duplicate session creations.
      
      In some cases, taking a reference on the session is not enough. The
      special callbacks .ref() and .deref() also have to be called in cases
      where the PPP pseudo-wire uses the socket associated with the session.
      Therefore, when looking up a session, we also have to pass a flag
      indicating if the .ref() callback has to be called.
      
      In the future, we probably could drop the .ref() and .deref() callbacks
      entirely by protecting the .sock field of struct pppol2tp_session with
      RCU, thus allowing it to be freed and set to NULL even if the L2TP
      session is still alive.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5c1e519
    • Guillaume Nault's avatar
      l2tp: take a reference on sessions used in genetlink handlers · 2777e2ab
      Guillaume Nault authored
      Callers of l2tp_nl_session_find() need to hold a reference on the
      returned session since there's no guarantee that it isn't going to
      disappear from under them.
      
      Relying on the fact that no l2tp netlink message may be processed
      concurrently isn't enough: sessions can be deleted by other means
      (e.g. by closing the PPPOL2TP socket of a ppp pseudowire).
      
      l2tp_nl_cmd_session_delete() is a bit special: it runs a callback
      function that may require a previous call to session->ref(). In
      particular, for ppp pseudowires, the callback is l2tp_session_delete(),
      which then calls pppol2tp_session_close() and dereferences the PPPOL2TP
      socket. The socket might already be gone at the moment
      l2tp_session_delete() calls session->ref(), so we need to take a
      reference during the session lookup. So we need to pass the do_ref
      variable down to l2tp_session_get() and l2tp_session_get_by_ifname().
      
      Since all callers have to be updated, l2tp_session_find_by_ifname() and
      l2tp_nl_session_find() are renamed to reflect their new behaviour.
      
      Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP")
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2777e2ab
    • Guillaume Nault's avatar
      l2tp: hold session while sending creation notifications · 5e6a9e5a
      Guillaume Nault authored
      l2tp_session_find() doesn't take any reference on the returned session.
      Therefore, the session may disappear while sending the notification.
      
      Use l2tp_session_get() instead and decrement session's refcount once
      the notification is sent.
      
      Fixes: 33f72e6f ("l2tp : multicast notification to the registered listeners")
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e6a9e5a
    • Guillaume Nault's avatar
      l2tp: fix duplicate session creation · dbdbc73b
      Guillaume Nault authored
      l2tp_session_create() relies on its caller for checking for duplicate
      sessions. This is racy since a session can be concurrently inserted
      after the caller's verification.
      
      Fix this by letting l2tp_session_create() verify sessions uniqueness
      upon insertion. Callers need to be adapted to check for
      l2tp_session_create()'s return code instead of calling
      l2tp_session_find().
      
      pppol2tp_connect() is a bit special because it has to work on existing
      sessions (if they're not connected) or to create a new session if none
      is found. When acting on a preexisting session, a reference must be
      held or it could go away on us. So we have to use l2tp_session_get()
      instead of l2tp_session_find() and drop the reference before exiting.
      
      Fixes: d9e31d17 ("l2tp: Add L2TP ethernet pseudowire support")
      Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dbdbc73b
    • Guillaume Nault's avatar
      l2tp: ensure session can't get removed during pppol2tp_session_ioctl() · 57377d63
      Guillaume Nault authored
      Holding a reference on session is required before calling
      pppol2tp_session_ioctl(). The session could get freed while processing the
      ioctl otherwise. Since pppol2tp_session_ioctl() uses the session's socket,
      we also need to take a reference on it in l2tp_session_get().
      
      Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      57377d63
    • Guillaume Nault's avatar
      l2tp: fix race in l2tp_recv_common() · 61b9a047
      Guillaume Nault authored
      Taking a reference on sessions in l2tp_recv_common() is racy; this
      has to be done by the callers.
      
      To this end, a new function is required (l2tp_session_get()) to
      atomically lookup a session and take a reference on it. Callers then
      have to manually drop this reference.
      
      Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61b9a047
    • Xin Long's avatar
      sctp: use right in and out stream cnt · afe89962
      Xin Long authored
      Since sctp reconf was added in sctp, the real cnt of in/out stream
      have not been c.sinit_max_instreams and c.sinit_num_ostreams any
      more.
      
      This patch is to replace them with stream->in/outcnt.
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      afe89962
  6. 01 Apr, 2017 9 commits
    • David S. Miller's avatar
      Merge tag 'mac80211-for-davem-2017-03-31' of... · 612307c6
      David S. Miller authored
      Merge tag 'mac80211-for-davem-2017-03-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
      
      Johannes Berg says:
      
      ====================
      Two fixes:
       * don't block netdev queues (indefinitely!) if mac80211
         manages traffic queueing itself
       * check wiphy registration before checking for ops
         on resume, to avoid crash
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      612307c6
    • David S. Miller's avatar
      Merge branch 'bpf-map_value_adj-reg-types-fixes' · 0989bd03
      David S. Miller authored
      Daniel Borkmann says:
      
      ====================
      BPF fixes on map_value_adj reg types
      
      This set adds two fixes for map_value_adj register type in the
      verifier and user space tests along with them for the BPF self
      test suite. For details, please see individual patches.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0989bd03
    • Daniel Borkmann's avatar
      bpf: add various verifier test cases for self-tests · 02ea80b1
      Daniel Borkmann authored
      Add a couple of test cases, for example, probing for xadd on a spilled
      pointer to packet and map_value_adj register, various other map_value_adj
      tests including the unaligned load/store, and trying out pointer arithmetic
      on map_value_adj register itself. For the unaligned load/store, we need
      to figure out whether the architecture has efficient unaligned access and
      need to mark affected tests accordingly.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      02ea80b1
    • Daniel Borkmann's avatar
      bpf, verifier: fix rejection of unaligned access checks for map_value_adj · 79adffcd
      Daniel Borkmann authored
      Currently, the verifier doesn't reject unaligned access for map_value_adj
      register types. Commit 48461135 ("bpf: allow access into map value
      arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET
      to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement
      is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never
      non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for
      architectures not supporting efficient unaligned access, and thus worst
      case could raise exceptions on some archs that are unable to correct the
      unaligned access or perform a different memory access to the actual
      requested one and such.
      
      i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
         on r0 (map_value_adj):
      
         0: (bf) r2 = r10
         1: (07) r2 += -8
         2: (7a) *(u64 *)(r2 +0) = 0
         3: (18) r1 = 0x42533a00
         5: (85) call bpf_map_lookup_elem#1
         6: (15) if r0 == 0x0 goto pc+11
          R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
         7: (61) r1 = *(u32 *)(r0 +0)
         8: (35) if r1 >= 0xb goto pc+9
          R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp
         9: (07) r0 += 3
        10: (79) r7 = *(u64 *)(r0 +0)
          R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp
        11: (79) r7 = *(u64 *)(r0 +2)
          R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp
        [...]
      
      ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
          on r0 (map_value_adj):
      
         0: (bf) r2 = r10
         1: (07) r2 += -8
         2: (7a) *(u64 *)(r2 +0) = 0
         3: (18) r1 = 0x4df16a00
         5: (85) call bpf_map_lookup_elem#1
         6: (15) if r0 == 0x0 goto pc+19
          R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
         7: (07) r0 += 3
         8: (7a) *(u64 *)(r0 +0) = 42
          R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp
         9: (7a) *(u64 *)(r0 +2) = 43
          R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp
        10: (7a) *(u64 *)(r0 -2) = 44
          R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp
        [...]
      
      For the PTR_TO_PACKET type, reg->id is initially zero when skb->data
      was fetched, it later receives a reg->id from env->id_gen generator
      once another register with UNKNOWN_VALUE type was added to it via
      check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it
      is used in find_good_pkt_pointers() for setting the allowed access
      range for regs with PTR_TO_PACKET of same id once verifier matched
      on data/data_end tests, and ii) for check_ptr_alignment() to determine
      that when not having efficient unaligned access and register with
      UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed
      to access the content bytewise due to unknown unalignment. reg->id
      was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is
      always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that
      was added after 48461135 via 57a09bf0 ("bpf: Detect identical
      PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for
      non-root environment due to prohibited pointer arithmetic.
      
      The fix splits register-type specific checks into their own helper
      instead of keeping them combined, so we don't run into a similar
      issue in future once we extend check_ptr_alignment() further and
      forget to add reg->type checks for some of the checks.
      
      Fixes: 48461135 ("bpf: allow access into map value arrays")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Reviewed-by: default avatarJosef Bacik <jbacik@fb.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      79adffcd
    • Daniel Borkmann's avatar
      bpf, verifier: fix alu ops against map_value{, _adj} register types · fce366a9
      Daniel Borkmann authored
      While looking into map_value_adj, I noticed that alu operations
      directly on the map_value() resp. map_value_adj() register (any
      alu operation on a map_value() register will turn it into a
      map_value_adj() typed register) are not sufficiently protected
      against some of the operations. Two non-exhaustive examples are
      provided that the verifier needs to reject:
      
       i) BPF_AND on r0 (map_value_adj):
      
        0: (bf) r2 = r10
        1: (07) r2 += -8
        2: (7a) *(u64 *)(r2 +0) = 0
        3: (18) r1 = 0xbf842a00
        5: (85) call bpf_map_lookup_elem#1
        6: (15) if r0 == 0x0 goto pc+2
         R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
        7: (57) r0 &= 8
        8: (7a) *(u64 *)(r0 +0) = 22
         R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=8 R10=fp
        9: (95) exit
      
        from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp
        9: (95) exit
        processed 10 insns
      
      ii) BPF_ADD in 32 bit mode on r0 (map_value_adj):
      
        0: (bf) r2 = r10
        1: (07) r2 += -8
        2: (7a) *(u64 *)(r2 +0) = 0
        3: (18) r1 = 0xc24eee00
        5: (85) call bpf_map_lookup_elem#1
        6: (15) if r0 == 0x0 goto pc+2
         R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
        7: (04) (u32) r0 += (u32) 0
        8: (7a) *(u64 *)(r0 +0) = 22
         R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
        9: (95) exit
      
        from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp
        9: (95) exit
        processed 10 insns
      
      Issue is, while min_value / max_value boundaries for the access
      are adjusted appropriately, we change the pointer value in a way
      that cannot be sufficiently tracked anymore from its origin.
      Operations like BPF_{AND,OR,DIV,MUL,etc} on a destination register
      that is PTR_TO_MAP_VALUE{,_ADJ} was probably unintended, in fact,
      all the test cases coming with 48461135 ("bpf: allow access
      into map value arrays") perform BPF_ADD only on the destination
      register that is PTR_TO_MAP_VALUE_ADJ.
      
      Only for UNKNOWN_VALUE register types such operations make sense,
      f.e. with unknown memory content fetched initially from a constant
      offset from the map value memory into a register. That register is
      then later tested against lower / upper bounds, so that the verifier
      can then do the tracking of min_value / max_value, and properly
      check once that UNKNOWN_VALUE register is added to the destination
      register with type PTR_TO_MAP_VALUE{,_ADJ}. This is also what the
      original use-case is solving. Note, tracking on what is being
      added is done through adjust_reg_min_max_vals() and later access
      to the map value enforced with these boundaries and the given offset
      from the insn through check_map_access_adj().
      
      Tests will fail for non-root environment due to prohibited pointer
      arithmetic, in particular in check_alu_op(), we bail out on the
      is_pointer_value() check on the dst_reg (which is false in root
      case as we allow for pointer arithmetic via env->allow_ptr_leaks).
      
      Similarly to PTR_TO_PACKET, one way to fix it is to restrict the
      allowed operations on PTR_TO_MAP_VALUE{,_ADJ} registers to 64 bit
      mode BPF_ADD. The test_verifier suite runs fine after the patch
      and it also rejects mentioned test cases.
      
      Fixes: 48461135 ("bpf: allow access into map value arrays")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Reviewed-by: default avatarJosef Bacik <jbacik@fb.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fce366a9
    • René Rebe's avatar
      r8152: The Microsoft Surface docks also use R8152 v2 · d5b07ccc
      René Rebe authored
      Without this the generic cdc_ether grabs the device,
      and does not really work.
      Signed-off-by: default avatarRené Rebe <rene@exactcode.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d5b07ccc
    • Yi-Hung Wei's avatar
      openvswitch: Fix ovs_flow_key_update() · 6f56f618
      Yi-Hung Wei authored
      ovs_flow_key_update() is called when the flow key is invalid, and it is
      used to update and revalidate the flow key. Commit 329f45bc
      ("openvswitch: add mac_proto field to the flow key") introduces mac_proto
      field to flow key and use it to determine whether the flow key is valid.
      However, the commit does not update the code path in ovs_flow_key_update()
      to revalidate the flow key which may cause BUG_ON() on execute_recirc().
      This patch addresses the aforementioned issue.
      
      Fixes: 329f45bc ("openvswitch: add mac_proto field to the flow key")
      Signed-off-by: default avatarYi-Hung Wei <yihung.wei@gmail.com>
      Acked-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6f56f618
    • Mark Brown's avatar
      net/faraday: Explicitly include linux/of.h and linux/property.h · 3af887c3
      Mark Brown authored
      This driver uses interfaces from linux/of.h and linux/property.h but
      relies on implict inclusion of those headers which means that changes in
      other headers could break the build, as happened in -next for arm today.
      Add a explicit includes.
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Acked-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3af887c3
    • Daode Huang's avatar
      net: hns: Add ACPI support to check SFP present · b917078c
      Daode Huang authored
      The current code only supports DT to check SFP present.
      This patch adds ACPI support as well.
      Signed-off-by: default avatarDaode Huang <huangdaode@hisilicon.com>
      Reviewed-by: default avatarYisen Zhuang <yisen.zhuang@huawei.com>
      Signed-off-by: default avatarSalil Mehta <salil.mehta@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b917078c
  7. 30 Mar, 2017 8 commits
  8. 29 Mar, 2017 5 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 8f1f7eeb
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter fixes for net
      
      The following patchset contains a rather large update with Netfilter
      fixes, specifically targeted to incorrect RCU usage in several spots and
      the userspace conntrack helper infrastructure (nfnetlink_cthelper),
      more specifically they are:
      
      1) expect_class_max is incorrect set via cthelper, as in kernel semantics
         mandate that this represents the array of expectation classes minus 1.
         Patch from Liping Zhang.
      
      2) Expectation policy updates via cthelper are currently broken for several
         reasons: This code allows illegal changes in the policy such as changing
         the number of expeciation classes, it is leaking the updated policy and
         such update occurs with no RCU protection at all. Fix this by adding a
         new nfnl_cthelper_update_policy() that describes what is really legal on
         the update path.
      
      3) Fix several memory leaks in cthelper, from Jeffy Chen.
      
      4) synchronize_rcu() is missing in the removal path of several modules,
         this may lead to races since CPU may still be running on code that has
         just gone. Also from Liping Zhang.
      
      5) Don't use the helper hashtable from cthelper, it is not safe to walk
         over those bits without the helper mutex. Fix this by introducing a
         new independent list for userspace helpers. From Liping Zhang.
      
      6) nf_ct_extend_unregister() needs synchronize_rcu() to make sure no
         packets are walking on any conntrack extension that is gone after
         module removal, again from Liping.
      
      7) nf_nat_snmp may crash if we fail to unregister the helper due to
         accidental leftover code, from Gao Feng.
      
      8) Fix leak in nfnetlink_queue with secctx support, from Liping Zhang.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8f1f7eeb
    • Zakharov Vlad's avatar
      ezchip: nps_enet: check if napi has been completed · 358e78b5
      Zakharov Vlad authored
      After a new NAPI_STATE_MISSED state was added to NAPI we can get into
      this state and in such case we have to reschedule NAPI as some work is
      still pending and we have to process it. napi_complete_done() function
      returns false if we have to reschedule something (e.g. in case we were
      in MISSED state) as current polling have not been completed yet.
      
      nps_enet driver hasn't been verifying the return value of
      napi_complete_done() and has been forcibly enabling interrupts. That is
      not correct as we should not enable interrupts before we have processed
      all scheduled work. As a result we were getting trapped in interrupt
      hanlder chain as we had never been able to disabale ethernet
      interrupts again.
      
      So this patch makes nps_enet_poll() func verify return value of
      napi_complete_done() and enable interrupts only in case all scheduled
      work has been completed.
      Signed-off-by: default avatarVlad Zakharov <vzakhar@synopsys.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      358e78b5
    • David S. Miller's avatar
      Merge branch 'bnxt_en-fixes' · a1801cc8
      David S. Miller authored
      Michael Chan says:
      
      ====================
      bnxt_en: Small misc. fixes.
      
      Fix a NULL pointer crash in open failure path, wrong arguments when
      printing error messages, and a DMA unmap bug in XDP shutdown path.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1801cc8
    • Michael Chan's avatar
      bnxt_en: Fix DMA unmapping of the RX buffers in XDP mode during shutdown. · 3ed3a83e
      Michael Chan authored
      In bnxt_free_rx_skbs(), which is called to free up all RX buffers during
      shutdown, we need to unmap the page if we are running in XDP mode.
      
      Fixes: c61fb99c ("bnxt_en: Add RX page mode support.")
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3ed3a83e
    • Sankar Patchineelam's avatar