- 01 Jul, 2020 18 commits
-
-
Christoph Hellwig authored
generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by:
-
Christoph Hellwig authored
The variable is only used once, so just open code the bio_sector() there. Signed-off-by:
-
Christoph Hellwig authored
All registers disks must have a valid queue pointer, so don't bother to log a warning for that case. Signed-off-by:
-
Christoph Hellwig authored
The "generic_make_request: " prefix has no value, and will soon become stale. Signed-off-by:
-
Christoph Hellwig authored
The queue can be trivially derived from the bio, so pass one less argument. Signed-off-by:
-
Christoph Hellwig authored
All bios can get remapped if submitted to partitions. No need to comment on that. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Nothing in bcache actually uses the ->queuedata field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up the queuedata as well just use one private data field. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Hou Tao authored
Just use rq directly, the usage of list_entry_rq() doesn't make any sense. Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
- 30 Jun, 2020 10 commits
-
-
Colin Ian King authored
There is a statement that is indented one level too deeply, fix it by removing a tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ming Lei authored
Move .nr_active update and request assignment into blk_mq_get_driver_tag(), all are good to do during getting driver tag. Meantime blk-flush related code is simplified and flush request needn't to update the request table manually any more. Signed-off-by:
-
Ming Lei authored
It is used by blk-mq.c only, so move it to the source file. Suggested-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Ming Lei authored
blk_mq_get_driver_tag() is only used by blk-mq.c and is supposed to stay in blk-mq.c, so move it and preparing for cleanup code of get/put driver tag. Meantime hctx_may_queue() is moved to header file and it is fine since it is defined as inline always. No functional change. Signed-off-by:
-
Ming Lei authored
More and more drivers want to get batching requests queued from block layer, such as mmc, and tcp based storage drivers. Also current in-tree users have virtio-scsi, virtio-blk and nvme. For none, we already support batching dispatch. But for io scheduler, every time we just take one request from scheduler and pass the single request to blk_mq_dispatch_rq_list(). This way makes batching dispatch not possible when io scheduler is applied. One reason is that we don't want to hurt sequential IO performance, becasue IO merge chance is reduced if more requests are dequeued from scheduler queue. Try to support batching dispatch for io scheduler by starting with the following simple approach: 1) still make sure we can get budget before dequeueing request 2) use hctx->dispatch_busy to evaluate if queue is busy, if it is busy we fackback to non-batching dispatch, otherwise dequeue as many as possible requests from scheduler, and pass them to blk_mq_dispatch_rq_list(). Wrt. 2), we use similar policy for none, and turns out that SCSI SSD performance got improved much. In future, maybe we can develop more intelligent algorithem for batching dispatch. Baolin has tested this patch and found that MMC performance is improved[3]. [1] https://lore.kernel.org/linux-block/20200512075501.GF1531898@T590/#r [2] https://lore.kernel.org/linux-block/fe6bd8b9-6ed9-b225-f80c-314746133722@grimberg.me/ [3] https://lore.kernel.org/linux-block/CADBw62o9eTQDJ9RvNgEqSpXmg6Xcq=2TxH0Hfxhp29uF2W=TXA@mail.gmail.com/Signed-off-by:
Baolin Wang <baolin.wang7@gmail.com> Reviewed-by:
-
Ming Lei authored
Pass obtained budget count to blk_mq_dispatch_rq_list(), and prepare for supporting fully batching submission. With the obtained budget count, it is easier to put extra budgets in case of .queue_rq failure. Meantime remove the old 'got_budget' parameter. Signed-off-by:
-
Ming Lei authored
When BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE is returned from .queue_rq, the 'list' variable always holds this rq which isn't queued to LLD successfully. So blk_mq_dispatch_rq_list() always returns false from the branch of '!list_empty(list)'. No functional change. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
Ming Lei authored
Move code for getting driver tag and budget into one helper, so blk_mq_dispatch_rq_list gets a bit simplified, and easier to read. Meantime move updating of 'no_tag' and 'no_budget_available' into the branch for handling partial dispatch because that is exactly consumer of the two local variables. Also rename the parameter of 'got_budget' as 'ask_budget'. No functional change. Signed-off-by:
-
Ming Lei authored
All requests in the 'list' of blk_mq_dispatch_rq_list belong to same hctx, so it is better to pass hctx instead of request queue, because blk-mq's dispatch target is hctx instead of request queue. Signed-off-by:
-
Ming Lei authored
blk-mq budget is abstract from scsi's device queue depth, and it is always per-request-queue instead of hctx. It can be quite absurd to get a budget from one hctx, then dequeue a request from scheduler queue, and this request may not belong to this hctx, at least for bfq and deadline. So fix the mess and always pass request queue to get/put budget callback. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
- 29 Jun, 2020 12 commits
-
-
Christoph Hellwig authored
Just check for a non-NULL elevator directly to make the code more clear. Signed-off-by:
-
Ming Lei authored
It is natural to release driver tag when this request is completed by LLD or device since its purpose is for LLD use. One big benefit is that the released tag can be re-used quicker since bio_endio() may take too long. Meantime we don't need to release driver tag for flush request. Reviewed-by:
-
Christoph Hellwig authored
bios must have a valid block group by the time they are submitted. Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
blkcg_bio_issue_check is a giant inline function that does three entirely different things. Factor out the blk-cgroup related bio initalization into a new helper, and the open code the sequence in the only caller, relying on the fact that all the actual functionality is stubbed out for non-cgroup builds. Acked-by:
-
Christoph Hellwig authored
The only thing in blkcg_bio_issue_check that needs to be under rcu_read_lock is blk_throtl_bio, so move the locking there. Acked-by:
-
Christoph Hellwig authored
cgroup_rstat_updated is only used by core block code, no need to export it. Acked-by:
-
Christoph Hellwig authored
This is purely a sanity check for grave programming errors. Remove it to simplify further work in this area. Acked-by:
-
Christoph Hellwig authored
By moving the initial blkg lookup into blkg_tryget_closest we get a nicely self contained routines that does all the RCU locking. Acked-by:
-
Christoph Hellwig authored
The root_blkg is only torn down at the very end of removing a queue. So in the I/O submission path is always has a life reference and we can just grab another one using blkg_get instead of doing a tryget and parent walk that won't lead anywhere. Acked-by:
-
Christoph Hellwig authored
No good reason to keep these two functions split. Acked-by:
-
Christoph Hellwig authored
Keep the cgroup code together. Acked-by:
-
Christoph Hellwig authored
bio_associate_blkg_from_page is a special purpose helper for swap bios that doesn't need access to bio internals. Move it to the swap code instead of having it in bio.c. Acked-by:
-
