Commits · ed14e5903638f6eb868e3e2b4e610985e6a6c876 · Kirill Smelkov / linux

08 Dec, 2022 5 commits

net: thunderbolt: fix memory leak in tbnet_open() · ed14e590

Zhengchao Shao authored Dec 07, 2022

When tb_ring_alloc_rx() failed in tbnet_open(), ida that allocated in
tb_xdomain_alloc_out_hopid() is not released. Add
tb_xdomain_release_out_hopid() to the error path to release ida.

Fixes: 180b0689 ("thunderbolt: Allow multiple DMA tunnels over a single XDomain connection")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20221207015001.1755826-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ed14e590

ipv6: avoid use-after-free in ip6_fragment() · 803e8486

Eric Dumazet authored Dec 06, 2022

Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers.

It seems to not be always true, at least for UDP stack.

syzbot reported:

BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline]
BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951
Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618

CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:284 [inline]
 print_report+0x15e/0x45d mm/kasan/report.c:395
 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
 ip6_dst_idev include/net/ip6_fib.h:245 [inline]
 ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951
 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline]
 ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206
 NF_HOOK_COND include/linux/netfilter.h:291 [inline]
 ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
 dst_output include/net/dst.h:445 [inline]
 ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161
 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966
 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286
 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313
 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606
 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 sock_write_iter+0x295/0x3d0 net/socket.c:1108
 call_write_iter include/linux/fs.h:2191 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x9ed/0xdd0 fs/read_write.c:584
 ksys_write+0x1ec/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fde3588c0d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9
RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a
RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000
 </TASK>

Allocated by task 7618:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325
 kasan_slab_alloc include/linux/kasan.h:201 [inline]
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3398 [inline]
 slab_alloc mm/slub.c:3406 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3413 [inline]
 kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422
 dst_alloc+0x14a/0x1f0 net/core/dst.c:92
 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344
 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline]
 rt6_make_pcpu_route net/ipv6/route.c:1417 [inline]
 ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254
 pol_lookup_func include/net/ip6_fib.h:582 [inline]
 fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121
 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625
 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638
 ip6_route_output include/net/ip6_route.h:98 [inline]
 ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092
 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222
 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260
 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554
 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 __sys_sendto+0x23a/0x340 net/socket.c:2117
 __do_sys_sendto net/socket.c:2129 [inline]
 __se_sys_sendto net/socket.c:2125 [inline]
 __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 7599:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:511
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200
 kasan_slab_free include/linux/kasan.h:177 [inline]
 slab_free_hook mm/slub.c:1724 [inline]
 slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1750
 slab_free mm/slub.c:3661 [inline]
 kmem_cache_free+0xee/0x5c0 mm/slub.c:3683
 dst_destroy+0x2ea/0x400 net/core/dst.c:127
 rcu_do_batch kernel/rcu/tree.c:2250 [inline]
 rcu_core+0x81f/0x1980 kernel/rcu/tree.c:2510
 __do_softirq+0x1fb/0xadc kernel/softirq.c:571

Last potentially related work creation:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481
 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798
 dst_release net/core/dst.c:177 [inline]
 dst_release+0x7d/0xe0 net/core/dst.c:167
 refdst_drop include/net/dst.h:256 [inline]
 skb_dst_drop include/net/dst.h:268 [inline]
 skb_release_head_state+0x250/0x2a0 net/core/skbuff.c:838
 skb_release_all net/core/skbuff.c:852 [inline]
 __kfree_skb net/core/skbuff.c:868 [inline]
 kfree_skb_reason+0x151/0x4b0 net/core/skbuff.c:891
 kfree_skb_list_reason+0x4b/0x70 net/core/skbuff.c:901
 kfree_skb_list include/linux/skbuff.h:1227 [inline]
 ip6_fragment+0x2026/0x2770 net/ipv6/ip6_output.c:949
 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline]
 ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206
 NF_HOOK_COND include/linux/netfilter.h:291 [inline]
 ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
 dst_output include/net/dst.h:445 [inline]
 ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161
 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966
 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286
 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313
 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606
 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 sock_write_iter+0x295/0x3d0 net/socket.c:1108
 call_write_iter include/linux/fs.h:2191 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x9ed/0xdd0 fs/read_write.c:584
 ksys_write+0x1ec/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Second to last potentially related work creation:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481
 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798
 dst_release net/core/dst.c:177 [inline]
 dst_release+0x7d/0xe0 net/core/dst.c:167
 refdst_drop include/net/dst.h:256 [inline]
 skb_dst_drop include/net/dst.h:268 [inline]
 __dev_queue_xmit+0x1b9d/0x3ba0 net/core/dev.c:4211
 dev_queue_xmit include/linux/netdevice.h:3008 [inline]
 neigh_resolve_output net/core/neighbour.c:1552 [inline]
 neigh_resolve_output+0x51b/0x840 net/core/neighbour.c:1532
 neigh_output include/net/neighbour.h:546 [inline]
 ip6_finish_output2+0x56c/0x1530 net/ipv6/ip6_output.c:134
 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
 ip6_finish_output+0x694/0x1170 net/ipv6/ip6_output.c:206
 NF_HOOK_COND include/linux/netfilter.h:291 [inline]
 ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
 dst_output include/net/dst.h:445 [inline]
 NF_HOOK include/linux/netfilter.h:302 [inline]
 NF_HOOK include/linux/netfilter.h:296 [inline]
 mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820
 mld_send_cr net/ipv6/mcast.c:2121 [inline]
 mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x669/0x1090 kernel/workqueue.c:2436
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The buggy address belongs to the object at ffff88801d403dc0
 which belongs to the cache ip6_dst_cache of size 240
The buggy address is located 192 bytes inside of
 240-byte region [ffff88801d403dc0, ffff88801d403eb0)

The buggy address belongs to the physical page:
page:ffffea00007500c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d403
memcg:ffff888022f49c81
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 ffffea0001ef6580 dead000000000002 ffff88814addf640
raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888022f49c81
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 3719, tgid 3719 (kworker/0:6), ts 136223432244, free_ts 136222971441
 prep_new_page mm/page_alloc.c:2539 [inline]
 get_page_from_freelist+0x10b5/0x2d50 mm/page_alloc.c:4288
 __alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5555
 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2285
 alloc_slab_page mm/slub.c:1794 [inline]
 allocate_slab+0x213/0x300 mm/slub.c:1939
 new_slab mm/slub.c:1992 [inline]
 ___slab_alloc+0xa91/0x1400 mm/slub.c:3180
 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3279
 slab_alloc_node mm/slub.c:3364 [inline]
 slab_alloc mm/slub.c:3406 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3413 [inline]
 kmem_cache_alloc+0x31a/0x3d0 mm/slub.c:3422
 dst_alloc+0x14a/0x1f0 net/core/dst.c:92
 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344
 icmp6_dst_alloc+0x71/0x680 net/ipv6/route.c:3261
 mld_sendpack+0x5de/0xe70 net/ipv6/mcast.c:1809
 mld_send_cr net/ipv6/mcast.c:2121 [inline]
 mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x669/0x1090 kernel/workqueue.c:2436
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1459 [inline]
 free_pcp_prepare+0x65c/0xd90 mm/page_alloc.c:1509
 free_unref_page_prepare mm/page_alloc.c:3387 [inline]
 free_unref_page+0x1d/0x4d0 mm/page_alloc.c:3483
 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2586
 qlink_free mm/kasan/quarantine.c:168 [inline]
 qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
 kasan_quarantine_reduce+0x184/0x210 mm/kasan/quarantine.c:294
 __kasan_slab_alloc+0x66/0x90 mm/kasan/common.c:302
 kasan_slab_alloc include/linux/kasan.h:201 [inline]
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3398 [inline]
 kmem_cache_alloc_node+0x304/0x410 mm/slub.c:3443
 __alloc_skb+0x214/0x300 net/core/skbuff.c:497
 alloc_skb include/linux/skbuff.h:1267 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1191 [inline]
 netlink_sendmsg+0x9a6/0xe10 net/netlink/af_netlink.c:1896
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 __sys_sendto+0x23a/0x340 net/socket.c:2117
 __do_sys_sendto net/socket.c:2129 [inline]
 __se_sys_sendto net/socket.c:2125 [inline]
 __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 1758fd46 ("ipv6: remove unnecessary dst_hold() in ip6_fragment()")
Reported-by: syzbot+8c0ac31aa9681abb9e2d@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20221206101351.2037285-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

803e8486

net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq() · 7d8c19bf

Yang Yingliang authored Dec 07, 2022

It is not allowed to call kfree_skb() or consume_skb() from
hardware interrupt context or with interrupts being disabled.
So replace kfree_skb/dev_kfree_skb() with dev_kfree_skb_irq()
and dev_consume_skb_irq() under spin_lock_irq().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20221207015310.2984909-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

7d8c19bf

net: phy: mxl-gpy: add MDINT workaround · 5f4d487d

Michael Walle authored Dec 05, 2022

At least the GPY215B and GPY215C has a bug where it is still driving the
interrupt line (MDINT) even after the interrupt status register is read
and its bits are cleared. This will cause an interrupt storm.

Although the MDINT is multiplexed with a GPIO pin and theoretically we
could switch the pinmux to GPIO input mode, this isn't possible because
the access to this register will stall exactly as long as the interrupt
line is asserted. We exploit this very fact and just read a random
internal register in our interrupt handler. This way, it will be delayed
until the external interrupt line is released and an interrupt storm is
avoided.

The internal register access via the mailbox was deduced by looking at
the downstream PHY API because the datasheet doesn't mention any of
this.

Fixes: 7d901a1e ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221205200453.3447866-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

5f4d487d

Merge tag 'linux-can-fixes-for-6.1-20221207' of... · 65e349f7

Jakub Kicinski authored Dec 07, 2022

Merge tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-12-07

The 1st patch is by Oliver Hartkopp and fixes a potential NULL pointer
deref found by syzbot in the AF_CAN protocol.

The next 2 patches are by Jiri Slaby and Max Staudt and add the
missing flush_work() before freeing the underlying memory in the slcan
and can327 driver.

The last patch is by Frank Jungclaus and target the esd_usb driver and
fixes the CAN error counters, allowing them to return to zero.

* tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: esd_usb: Allow REC and TEC to return to zero
  can: can327: flush TX_work on ldisc .close()
  can: slcan: fix freed work crash
  can: af_can: fix NULL pointer dereference in can_rcv_filter
====================

Link: https://lore.kernel.org/r/20221207105243.2483884-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

65e349f7

07 Dec, 2022 17 commits

net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports · 87a39882

Vladimir Oltean authored Dec 05, 2022

The ethernet-controller dt-schema, mostly pushed forward by Linux, has
the "internal" PHY mode for denoting MAC connections to an internal PHY.

U-Boot may provide device tree blobs where this phy-mode is specified,
so make the Linux driver accept them.

It appears that the current behavior with phy-mode = "internal" was
introduced when mv88e6xxx started reporting supported_interfaces to
phylink. Prior to that, I don't think it would have any issues accepting
this phy-mode.

Fixes: d4ebf12b ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Link: https://lore.kernel.org/linux-arm-kernel/20221205172709.kglithpbhdbsakvd@skbuf/T/Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx6q-gw904.dts
Link: https://lore.kernel.org/r/20221205194845.2131161-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

87a39882

xen/netback: don't call kfree_skb() under spin_lock_irqsave() · 9e624651

Yang Yingliang authored Dec 05, 2022

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: be81992f ("xen/netback: don't queue unlimited number of packages")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20221205141333.3974565-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

9e624651

Merge tag 'ieee802154-for-net-2022-12-05' of... · 92439a85

Paolo Abeni authored Dec 07, 2022

Merge tag 'ieee802154-for-net-2022-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2022-12-05

An update from ieee802154 for your *net* tree:

Three small fixes this time around.

Ziyang Xuan fixed an error code for a timeout during initialization of the
cc2520 driver.
Hauke Mehrtens fixed a crash in the ca8210 driver SPI communication due
uninitialized SPI structures.
Wei Yongjun added INIT_LIST_HEAD ieee802154_if_add() to avoid a potential
null pointer dereference.
====================

Link: https://lore.kernel.org/r/20221205122515.1720539-1-stefan@datenfreihafen.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

92439a85

dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove() · 4fad22a1

Yuan Can authored Dec 05, 2022

The cmd_buff needs to be freed when error happened in
dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove().

Fixes: 1110318d ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221205061515.115012-1-yuancan@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

4fad22a1

ethernet: aeroflex: fix potential skb leak in greth_init_rings() · 063a932b

Zhang Changzhong authored Dec 04, 2022

The greth_init_rings() function won't free the newly allocated skb when
dma_mapping_error() returns error, so add dev_kfree_skb() to fix it.

Compile tested only.

Fixes: d4c41139 ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1670134149-29516-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

063a932b

tipc: call tipc_lxc_xmit without holding node_read_lock · 88956177

Xin Long authored Dec 03, 2022

When sending packets between nodes in netns, it calls tipc_lxc_xmit() for
peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv()
might be called, and it's pretty much like in tipc_rcv().

Currently the local 'node rw lock' is held during calling tipc_lxc_xmit()
to protect the peer_net not being freed by another thread. However, when
receiving these packets, tipc_node_add_conn() might be called where the
peer 'node rw lock' is acquired. Then a dead lock warning is triggered by
lockdep detector, although it is not a real dead lock:

    WARNING: possible recursive locking detected
    --------------------------------------------
    conn_server/1086 is trying to acquire lock:
    ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \
                     at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]

    but task is already holding lock:
    ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
                     at: tipc_node_xmit+0x285/0xb30 [tipc]

    other info that might help us debug this:
     Possible unsafe locking scenario:

           CPU0
           ----
      lock(&n->lock#2);
      lock(&n->lock#2);

     *** DEADLOCK ***

     May be due to missing lock nesting notation

    4 locks held by conn_server/1086:
     #0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \
                          at: tipc_accept+0x9c0/0x10b0 [tipc]
     #1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \
                          at: tipc_accept+0x363/0x10b0 [tipc]
     #2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
                          at: tipc_node_xmit+0x285/0xb30 [tipc]
     #3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \
                          at: tipc_sk_rcv+0x2da/0x1b40 [tipc]

    Call Trace:
     <TASK>
     dump_stack_lvl+0x44/0x5b
     __lock_acquire.cold.77+0x1f2/0x3d7
     lock_acquire+0x1d2/0x610
     _raw_write_lock_bh+0x38/0x80
     tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
     tipc_sk_finish_conn+0x21e/0x640 [tipc]
     tipc_sk_filter_rcv+0x147b/0x3030 [tipc]
     tipc_sk_rcv+0xbb4/0x1b40 [tipc]
     tipc_lxc_xmit+0x225/0x26b [tipc]
     tipc_node_xmit.cold.82+0x4a/0x102 [tipc]
     __tipc_sendstream+0x879/0xff0 [tipc]
     tipc_accept+0x966/0x10b0 [tipc]
     do_accept+0x37d/0x590

This patch avoids this warning by not holding the 'node rw lock' before
calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock()
should be enough, as in cleanup_net() when freeing the netns, it calls
synchronize_rcu() before the free is continued.

Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes
sense to call it under rcu_read_lock(). Note that the right lock order
must be:

   rcu_read_lock();
   tipc_node_read_lock(n);
   tipc_node_read_unlock(n);
   tipc_lxc_xmit();
   rcu_read_unlock();

instead of:

   tipc_node_read_lock(n);
   rcu_read_lock();
   tipc_node_read_unlock(n);
   tipc_lxc_xmit();
   rcu_read_unlock();

and we have to call tipc_node_read_lock/unlock() twice in
tipc_node_xmit().

Fixes: f73b1281 ("tipc: improve throughput between nodes in netns")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

88956177

can: esd_usb: Allow REC and TEC to return to zero · 918ee491

Frank Jungclaus authored Nov 30, 2022

We don't get any further EVENT from an esd CAN USB device for changes
on REC or TEC while those counters converge to 0 (with ecc == 0). So
when handling the "Back to Error Active"-event force txerr = rxerr =
0, otherwise the berr-counters might stay on values like 95 forever.

Also, to make life easier during the ongoing development a
netdev_dbg() has been introduced to allow dumping error events send by
an esd CAN USB device.

Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

918ee491

can: can327: flush TX_work on ldisc .close() · f4a4d121

Max Staudt authored Dec 03, 2022

Additionally, remove it from .ndo_stop().

This ensures that the worker is not called after being freed, and that
the UART TX queue remains active to send final commands when the
netdev is stopped.

Thanks to Jiri Slaby for finding this in slcan:

  https://lore.kernel.org/linux-can/20221201073426.17328-1-jirislaby@kernel.org/

A variant of this patch for slcan, with the flush in .ndo_stop() still
present, has been tested successfully on physical hardware:

  https://bugzilla.suse.com/show_bug.cgi?id=1205597

Fixes: 43da2f07 ("can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters")
Cc: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20221202160148.282564-1-max@enpas.org
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

f4a4d121

can: slcan: fix freed work crash · fb855e9f

Jiri Slaby (SUSE) authored Dec 01, 2022

The LTP test pty03 is causing a crash in slcan:
  BUG: kernel NULL pointer dereference, address: 0000000000000008
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
  Workqueue:  0x0 (events)
  RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185)
  Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e
  RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968
  RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0
  RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734
  R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000
  R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0
  FS:  0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0
  Call Trace:
   <TASK>
  worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436)
  kthread (/home/rich/kernel/linux/kernel/kthread.c:376)
  ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312)

Apparently, the slcan's tx_work is freed while being scheduled. While
slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work),
slcan_close() (tty side) does not. So when the netdev is never set UP,
but the tty is stuffed with bytes and forced to wakeup write, the work
is scheduled, but never flushed.

So add an additional flush_work() to slcan_close() to be sure the work
is flushed under all circumstances.

The Fixes commit below moved flush_work() from slcan_close() to
slcan_netdev_close(). What was the rationale behind it? Maybe we can
drop the one in slcan_netdev_close()?

I see the same pattern in can327. So it perhaps needs the very same fix.

Fixes: cfcb4465 ("can: slcan: remove legacy infrastructure")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205597Reported-by: Richard Palethorpe <richard.palethorpe@suse.com>
Tested-by: Petr Vorel <petr.vorel@suse.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20221201073426.17328-1-jirislaby@kernel.orgSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

fb855e9f

can: af_can: fix NULL pointer dereference in can_rcv_filter · 0acc4423

Oliver Hartkopp authored Dec 06, 2022

Analogue to commit 8aa59e35 ("can: af_can: fix NULL pointer
dereference in can_rx_register()") we need to check for a missing
initialization of ml_priv in the receive path of CAN frames.

Since commit 4e096a18 ("net: introduce CAN specific pointer in the
struct net_device") the check for dev->type to be ARPHRD_CAN is not
sufficient anymore since bonding or tun netdevices claim to be CAN
devices but do not initialize ml_priv accordingly.

Fixes: 4e096a18 ("net: introduce CAN specific pointer in the struct net_device")
Reported-by: syzbot+2d7f58292cb5b29eb5ad@syzkaller.appspotmail.com
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20221206201259.3028-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

0acc4423

Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 1799c1b8

Jakub Kicinski authored Dec 06, 2022

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-12-05 (i40e)

Michal clears XPS init flag on reset to allow for updated values to be
written.

Sylwester adds sleep to VF reset to resolve issue of VFs not getting
resources.

Przemyslaw rejects filters for raw IPv4 or IPv6 l4_4_bytes filters as they
 are not supported.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Disallow ip4 and ip6 l4_4_bytes
  i40e: Fix for VF MAC address 0
  i40e: Fix not setting default xps_cpus after reset
====================

Link: https://lore.kernel.org/r/20221205212523.3197565-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

1799c1b8

net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions() · 78a9ea43

Zhengchao Shao authored Dec 05, 2022

When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(),
priv->regions is not released.

Fixes: bf425b82 ("net: dsa: sja1105: expose static config as devlink region")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205012132.2110979-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

78a9ea43

Merge branch 'ipv4-two-bug-fixes' · e40febfb

Jakub Kicinski authored Dec 06, 2022

Ido Schimmel says:

====================
ipv4: Two small fixes for bugs in IPv4 routing code.

A variation of the second bug was reported by an FRR 5.0 (released
06/18) user as this version was setting a table ID of 0 for the
default VRF, unlike iproute2 and newer FRR versions.

The first bug was discovered while fixing the second.

Both bugs are not regressions (never worked) and are not critical
in my opinion, so the fixes can be applied to net-next, if desired.

No regressions in other tests:

 # ./fib_tests.sh
 ...
 Tests passed: 191
 Tests failed:   0
====================

Link: https://lore.kernel.org/r/20221204075045.3780097-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

e40febfb

ipv4: Fix incorrect route flushing when table ID 0 is used · c0d99934

Ido Schimmel authored Dec 04, 2022

Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.

Consider the following example:

 # ip address add dev dummy1 192.0.2.1/28
 # ip address add dev dummy1 192.0.2.17/28
 # ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
 # ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
 # ip route show 198.51.100.0/24
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200

Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:

 # ip address del dev dummy1 192.0.2.17/28
 # ip route show 198.51.100.0/24
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200

Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.

Add a test case that fails before the fix:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Table ID 0
     TEST: Route removed in default VRF when source address deleted      [FAIL]

 Tests passed:   8
 Tests failed:   1

And passes after:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Table ID 0
     TEST: Route removed in default VRF when source address deleted      [ OK ]

 Tests passed:   9
 Tests failed:   0

Fixes: 5a56a0b3 ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

c0d99934

ipv4: Fix incorrect route flushing when source address is deleted · f96a3d74

Ido Schimmel authored Dec 04, 2022

Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.

Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().

Add test cases that fail before the fix:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [FAIL]
     TEST: Route in default VRF not removed                              [ OK ]
 RTNETLINK answers: File exists
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [FAIL]

 Tests passed:   6
 Tests failed:   2

And pass after:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]

 Tests passed:   8
 Tests failed:   0

Fixes: 5a56a0b3 ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

f96a3d74

net: fec: properly guard irq coalesce setup · 7e630356

Rasmus Villemoes authored Dec 05, 2022

Prior to the Fixes: commit, the initialization code went through the
same fec_enet_set_coalesce() function as used by ethtool, and that
function correctly checks whether the current variant has support for
irq coalescing.

Now that the initialization code instead calls fec_enet_itr_coal_set()
directly, that call needs to be guarded by a check for the
FEC_QUIRK_HAS_COALESCE bit.

Fixes: df727d45 (net: fec: don't reset irq coalesce settings to defaults on "ip link up")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

7e630356

bonding: get correct NA dest address · 1f154f3b

Hangbin Liu authored Dec 06, 2022

In commit 4d633d1b ("bonding: fix ICMPv6 header handling when receiving
IPv6 messages"), there is a copy/paste issue for NA daddr. I found that
in my testing and fixed it in my local branch. But I forgot to re-format
the patch and sent the wrong mail.

Fix it by reading the correct dest address.

Fixes: 4d633d1b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20221206032055.7517-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

1f154f3b

06 Dec, 2022 12 commits

tipc: Fix potential OOB in tipc_link_proto_rcv() · 743117a9

YueHaibing authored Dec 03, 2022

Fix the potential risk of OOB if skb_linearize() fails in
tipc_link_proto_rcv().

Fixes: 5cbb28a4 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

743117a9

net: hisilicon: Fix potential use-after-free in hix5hd2_rx() · 433c07a1

Liu Jian authored Dec 03, 2022

The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.

Fixes: 57c5bc9a ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

433c07a1

net: mdio: fix unbalanced fwnode reference count in mdio_device_release() · cb376176

Zeng Heng authored Dec 03, 2022

There is warning report about of_node refcount leak
while probing mdio device:

OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4

In of_mdiobus_register_device(), we increase fwnode refcount
by fwnode_handle_get() before associating the of_node with
mdio device, but it has never been decreased in normal path.
Since that, in mdio_device_release(), it needs to call
fwnode_handle_put() in addition instead of calling kfree()
directly.

After above, just calling mdio_device_free() in the error handle
path of of_mdiobus_register_device() is enough to keep the
refcount balanced.

Fixes: a9049e0c ("mdio: Add support for mdio drivers.")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

cb376176

net: hisilicon: Fix potential use-after-free in hisi_femac_rx() · 46401770

Liu Jian authored Dec 03, 2022

The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.

Fixes: 542ae60a ("net: hisilicon: Add Fast Ethernet MAC driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

46401770

net: thunderx: Fix missing destroy_workqueue of nicvf_rx_mode_wq · 42330a32

Yongqiang Liu authored Dec 03, 2022

The nicvf_probe() won't destroy workqueue when register_netdev()
failed. Add destroy_workqueue err handle case to fix this issue.

Fixes: 2ecbe4f4 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

42330a32

ravb: Fix potential use-after-free in ravb_rx_gbeth() · 5a5a3e56

YueHaibing authored Dec 03, 2022

The skb is delivered to napi_gro_receive() which may free it, after calling this,
dereferencing skb may trigger use-after-free.

Fixes: 1c59eb67 ("ravb: Fillup ravb_rx_gbeth() stub")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221203092941.10880-1-yuehaibing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

5a5a3e56

net: microchip: sparx5: Fix missing destroy_workqueue of mact_queue · 7b8232bd

Qiheng Lin authored Dec 03, 2022

The mchp_sparx5_probe() won't destroy workqueue created by
create_singlethread_workqueue() in sparx5_start() when later
inits failed. Add destroy_workqueue in the cleanup_ports case,
also add it in mchp_sparx5_remove()

Fixes: b37a1bae ("net: sparx5: add mactable support")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221203070259.19560-1-linqiheng@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

7b8232bd

ip_gre: do not report erspan version on GRE interface · ee496694

Hangbin Liu authored Dec 03, 2022

Although the type I ERSPAN is based on the barebones IP + GRE
encapsulation and no extra ERSPAN header. Report erspan version on GRE
interface looks unreasonable. Fix this by separating the erspan and gre
fill info.

IPv6 GRE does not have this info as IPv6 only supports erspan version
1 and 2.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: f989d546 ("erspan: Add type I version 0 support.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

ee496694

net: wwan: iosm: fix memory leak in ipc_mux_init() · 23353efc

Zhengchao Shao authored Dec 03, 2022

When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux
is not released.

Fixes: 1f52d7b6 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20221203020903.383235-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

23353efc

net: mana: Fix race on per-CQ variable napi work_done · 18010ff7

Haiyang Zhang authored Dec 02, 2022

After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be
cleared, and another CPU can start napi thread and access per-CQ variable,
cq->work_done. If the other thread (for example, from busy_poll) sets
it to a value >= budget, this thread will continue to run when it should
stop, and cause memory corruption and panic.

To fix this issue, save the per-CQ work_done variable in a local variable
before napi_complete_done(), so it won't be corrupted by a possible
concurrent thread after napi_complete_done().

Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done
variable race is fixed, so the driver is able to reliably support features
like busy_poll.

Cc: stable@vger.kernel.org
Fixes: e1b5683f ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1670010190-28595-1-git-send-email-haiyangz@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

18010ff7

net: stmmac: fix "snps,axi-config" node property parsing · 61d4f140

Jisheng Zhang authored Dec 03, 2022

In dt-binding snps,dwmac.yaml, some properties under "snps,axi-config"
node are named without "axi_" prefix, but the driver expects the
prefix. Since the dt-binding has been there for a long time, we'd
better make driver match the binding for compatibility.

Fixes: afea0365 ("stmmac: rework DMA bus setting and introduce new platform AXI structure")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221202161739.2203-1-jszhang@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

61d4f140

NFC: nci: Bounds check struct nfc_target arrays · e329e710

Kees Cook authored Dec 02, 2022

While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported:

memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18)

This appears to be a legitimate lack of bounds checking in
nci_add_new_protocol(). Add the missing checks.

Reported-by: syzbot+210e196cef4711b65139@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/0000000000001c590f05ee7b3ff4@google.com
Fixes: 019c4fba ("NFC: Add NCI multiple targets support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221202214410.never.693-kees@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

e329e710

05 Dec, 2022 6 commits

i40e: Disallow ip4 and ip6 l4_4_bytes · d64aaf3f

Przemyslaw Patynowski authored Nov 15, 2022

Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or
IP6 flow director filters. Flow director does not support filtering
on l4 bytes for PCTYPEs used by IP4 and IP6 filters.
Without this patch, user could create filters with l4_4_bytes fields,
which did not do any filtering on L4, but only on L3 fields.

Fixes: 36777d9f ("i40e: check current configured input set when adding ntuple filters")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

d64aaf3f

i40e: Fix for VF MAC address 0 · 08501970

Sylwester Dziedziuch authored Oct 31, 2022

After spawning max VFs on a PF, some VFs were not getting resources and
their MAC addresses were 0. This was caused by PF sleeping before flushing
HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for
VF.

Fix by adding a sleep after hw flush.

Fixes: e4b433f4 ("i40e: reset all VFs in parallel when rebuilding PF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

08501970

i40e: Fix not setting default xps_cpus after reset · 82e0572b

Michal Jaron authored Oct 24, 2022

During tx rings configuration default XPS queue config is set and
__I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is
cleared and set again with default mapping only during queues build,
it means after first setup or reset with queues rebuild. (i.e.
ethtool -L <interface> combined <number>) After other resets (i.e.
ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default
maps cannot be set again. It results in cleared xps_cpus mapping
until queues are not rebuild or mapping is not set by user.

Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let
the driver set xps_cpus to defaults again after it was cleared.

Fixes: 6f853d4f ("i40e: allow XPS with QoS enabled")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

82e0572b

net: mvneta: Prevent out of bounds read in mvneta_config_rss() · e8b4fc13

Dan Carpenter authored Dec 02, 2022

The pp->indir[0] value comes from the user.  It is passed to:

	if (cpu_online(pp->rxq_def))

inside the mvneta_percpu_elect() function.  It needs bounds checkeding
to ensure that it is not beyond the end of the cpu bitmap.

Fixes: cad5d847 ("net: mvneta: Fix the CPU choice in mvneta_percpu_elect")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e8b4fc13

xen-netfront: Fix NULL sring after live migration · d50b7914

Lin Liu authored Dec 02, 2022

A NAPI is setup for each network sring to poll data to kernel
The sring with source host is destroyed before live migration and
new sring with target host is setup after live migration.
The NAPI for the old sring is not deleted until setup new sring
with target host after migration. With busy_poll/busy_read enabled,
the NAPI can be polled before got deleted when resume VM.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: xennet_poll+0xae/0xd20
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Call Trace:
 finish_task_switch+0x71/0x230
 timerqueue_del+0x1d/0x40
 hrtimer_try_to_cancel+0xb5/0x110
 xennet_alloc_rx_buffers+0x2a0/0x2a0
 napi_busy_loop+0xdb/0x270
 sock_poll+0x87/0x90
 do_sys_poll+0x26f/0x580
 tracing_map_insert+0x1d4/0x2f0
 event_hist_trigger+0x14a/0x260

 finish_task_switch+0x71/0x230
 __schedule+0x256/0x890
 recalc_sigpending+0x1b/0x50
 xen_sched_clock+0x15/0x20
 __rb_reserve_next+0x12d/0x140
 ring_buffer_lock_reserve+0x123/0x3d0
 event_triggers_call+0x87/0xb0
 trace_event_buffer_commit+0x1c4/0x210
 xen_clocksource_get_cycles+0x15/0x20
 ktime_get_ts64+0x51/0xf0
 SyS_ppoll+0x160/0x1a0
 SyS_ppoll+0x160/0x1a0
 do_syscall_64+0x73/0x130
 entry_SYSCALL_64_after_hwframe+0x41/0xa6
...
RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900
CR2: 0000000000000008
---[ end trace f8601785b354351c ]---

xen frontend should remove the NAPIs for the old srings before live
migration as the bond srings are destroyed

There is a tiny window between the srings are set to NULL and
the NAPIs are disabled, It is safe as the NAPI threads are still
frozen at that time
Signed-off-by: Lin Liu <lin.liu@citrix.com>
Fixes: 4ec24119 ([NET]: Do not check netif_running() and carrier state in ->poll())
Signed-off-by: David S. Miller <davem@davemloft.net>

d50b7914

net: microchip: sparx5: correctly free skb in xmit · 121c6672

Casper Andersson authored Dec 02, 2022

consume_skb on transmitted, kfree_skb on dropped, do not free on
TX_BUSY.

Previously the xmit function could return -EBUSY without freeing, which
supposedly is interpreted as a drop. And was using kfree on successfully
transmitted packets.

sparx5_fdma_xmit and sparx5_inject returns error code, where -EBUSY
indicates TX_BUSY and any other error code indicates dropped.

Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

121c6672