- 07 Apr, 2009 39 commits
-
-
Sri Deevi authored
The audio module requested in driver differs with module created by Makefile. Makefile is corrected to create the same module name required by driver. Also, corrected the strings that shows wrong name. Signed-off-by:
Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
An earlier commit accidentally broke the detection of the cx25837 part of the cx23885. Reinstated the commented out code. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Sri Deevi authored
changed the pcb-config.c/h to pcb-cfg.c/h for short names. Signed-off-by:
-
Sri Deevi authored
Fixes several CodingStyle issues on the driver. Signed-off-by:
-
Mauro Carvalho Chehab authored
Only cx231xx-video needs linux/version.h, due to KERNEL_VERSION macro, that is used by V4L2 API. This patch moves the KERNEL_VERSION to its proper place and starts with 0,0,1. There are still much more to be fixed on later patches Signed-off-by: -
Mauro Carvalho Chehab authored
This patch cleans up CodingStyle on the following source files: There are still much more to be fixed on later patches Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Sri Deevi authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Sri Deevi authored
cx231xx has a cx25840 inside the chip. However, some different initializations are used for this variant. Signed-off-by:
-
Janne Grunau authored
If usb_interface.dev is used as dev parameter for v4l2_device_register v4l2_dev.name contains the v4l driver/module name and usb device and interface instead of a simple "usb x-y". It also matches the recommendation to set the parent devices for usb drivers. Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Paulius Zaleckas authored
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs. create mode 100644 arch/arm/mach-mx1/ksym_mx1.c create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h create mode 100644 drivers/media/video/mx1_camera.c Signed-off-by:
Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by:
Darius Augulis <augulis.darius@gmail.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
With the i.MX31 transition to clkdev clock names have changed, but mistakenly the "mx3-camera.0" has been registered with a non-NULL connection ID, which is not necessary, since this is the only clock, used by the capture interface driver. Fix the clock definition and the driver to use NULL as a connection ID. Signed-off-by:
Guennadi Liakhovetski <lg@denx.de> Acked-by:
-
Guennadi Liakhovetski authored
Use platform power hook to turn the camera on and off. Signed-off-by:
-
Stuart Hall authored
Patch to provide basic support for DigitalNow TinyTwin Remote. It uses same remote as TwinHan AzureWave AD-TU700(704J). Signed-off-by:
Stuart Hall <mailing-lists@enginuities.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Devin Heitmueller authored
Setup the i2c clock speed to be definable on a per-board basis. This allows us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid of code which sets it on a basis of what chip the i2c master is talking to at any given time (which could have caused issues because i2c slaves should never receive commands at a clock higher than their supported clock speed). Signed-off-by:
Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by:
-
Devin Heitmueller authored
Change the #define entries for the i2c registers to be more meaningful, and document the valid values for the registers. Note that this changeset makes *no* functional changes to the code. Signed-off-by:
-
Antti Palosaari authored
Add USB ID (07ca:850a) and configuration hack for AverMedia AVerTV Volar Black HD (A850) DVB-T USB stick. Tested-by:
Olivier MENUEL <omenuel@laposte.net> Tested-by:
Thomas Renard <threnard@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Remove wrong GPIO definitions. GPIOs used by AF9015 are property of the AF9013 demodulator and are coming from there. Signed-off-by:
-
Marc Schneider authored
Add USB ID (15a4:901b) and remote for TrekStor DVB-T USB Stick. Signed-off-by:
Marc Schneider <macke@macke.org> Signed-off-by:
-
Antti Palosaari authored
Add new USB ID (1b80:e395) for KWorld USB DVB-T TV Stick II (VS-DVB-T 395U). Thanks to Julian Aron Prenner <julian@linux4you.it> for reporting this. Signed-off-by:
-
Antti Palosaari authored
Remove experimental from DVB USB AF9015 device. Signed-off-by:
-
Mike Isely authored
Any time a struct (especially one not defined by this driver) is allocated, we MUST zero its underlying storage. This makes our usage of the struct predictable and robust against future changes where fields might be added that we don't know about. Failing to do this with tuner_setup left the config field uninitialized which then caused trouble with the tuner type used for HVR-1950 devices. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Douglas Schilling Landgraf authored
Converted em28xx driver to v4l2_subdev. Thanks to Hans Verkuil <hverkuil@xs4all.nl> for helping this conversion. Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Russell King authored
The following patch fixes a few bugs I've noticed in the V4L1 compatibility layer: - VIDEO_MODE_AUTO for get/set input ioctls was not being handled - wrong V4L2 ioctl being used in v4l1_compat_select_tuner Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Juan Jesús García de Soria Lucena authored
The CE6230 DVB USB driver works correctly for the AVerMedia A310 USB2.0 DVB-T tuner. Add the required USB ID's and hardware names so that the driver will handle it. Signed-off-by:
Juan Jesús García de Soria Lucena <skandalfo@gmail.com> Acked-by:
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Guennadi Liakhovetski authored
MT9M001 datasheet says, that the data is ready on the falling edge of the pixel clock, but the driver wrongly sets the SOCAM_PCLK_SAMPLE_RISING flag. Changing this doesn't seem to produce any visible difference, still, it is better to comply to the datasheet. Reported-by:
Sascha Oppermann <oppermann@garage-computers.com> Signed-off-by:
-
Guennadi Liakhovetski authored
soc-camera re-uses struct devices multiple times in calls to device_register(), therefore it has to reset the embedded struct kobject to avoid the "tried to init an initialized object" error, which then also erases its name. Now with the transition to kobject's name for device names, we have to re-initialise the name before each call to device_register(). Signed-off-by:
-
Kuninori Morimoto authored
priv->client->dev.platrom_data mean ov772x_camera_info in ov772x driver. So, struct soc_camera_link doesn't exist there. This patch modify this bug. Signed-off-by:
-
Guennadi Liakhovetski authored
pxa_dma_update_sg_tail() is called only once, runs exactly the same loop as the caller and has to recalculate the last element in an sg-list, that the caller has already calculated. Eliminate redundancy by merging the two loops and re-using the calculated pointer. This also saves a bit of performance which is always good during video-capture. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Robert Jarzmik authored
The last buffer queued will often overrun, as the DMA chain is finished, and the time the dma irq handler is activated, the QCI fifos are filled by the sensor. The fix is to ignore the overrun condition on the last queued buffer, and restart the capture only on intermediate buffers of the chain. Moreover, a fix was added to the very unlikely condition where in YUV422P mode, one channel overruns while another completes at the very same time. The capture is restarted after the overrun as before, but the other channel completion is now ignored. Signed-off-by:
-
Robert Jarzmik authored
The DMA transfers in pxa_camera showed some weaknesses in multiple queued buffers context : - poll/select problem The bug shows up with capture_example tool from v4l2 hg tree. The process just "stalls" on a "select timeout". - multiple buffers DMA starting When multiple buffers were queued, the DMA channels were always started right away. This is not optimal, as a special case appears when the first EOF was not yet reached, and the DMA channels were prematurely started. - Maintainability DMA code was a bit obfuscated. Rationalize the code to be easily maintainable by anyone. - DMA hot chaining DMA is not stopped anymore to queue a buffer, the buffer is queued with DMA running. As a tribute, a corner case exists where chaining happens while DMA finishes the chain, and the capture is restarted to deal with the missed link buffer. This patch attemps to address these issues / improvements. create mode 100644 Documentation/video4linux/pxa_camera.txt Signed-off-by:
-
Robert Jarzmik authored
All planes were PAGE aligned (ie. 4096 bytes aligned). This is not consistent with YUV422 format, which requires Y, U and V planes glued together. The new implementation forces the alignement on 8 bytes (DMA requirement), which is almost always the case (granted by width x height being a multiple of 8). The test cases include tests in both YUV422 and RGB565 : - a picture of size 111 x 111 (cross RAM pages example) - a picture of size 1023 x 4 in (under 1 RAM page) - a picture of size 1024 x 4 in (exactly 1 RAM page) - a picture of size 1025 x 4 in (over 1 RAM page) - a picture of size 1280 x 1024 (many RAM pages) Signed-off-by:
-
Robert Jarzmik authored
Due to DMA constraints, the DMA chain always transfers bytes from the QCI fifos to memory in 8 bytes units. In planar formats, that could mean 0 padding between Y and U plane (and between U and V plane), which is against YUV422P standard. Therefore, a frame size is required to be a multiple of 16 (so U plane size is a multiple of 8). It is enforced in try_fmt() and set_fmt() primitives, be aligning height then width on 4 multiples as need be, to reach a 16 multiple. Signed-off-by:
-
Kyle McMartin authored
CUSTOMISE appears to be the one actually defined... Signed-off-by:
Kyle McMartin <kyle@redhat.com> Signed-off-by:
-
- 05 Apr, 2009 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b62' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: Audit: remove spaces from audit_log_d_path audit: audit_set_auditable defined but not used audit: incorrect ref counting in audit tree tag_chunk audit: Fix possible return value truncation in audit_get_context() audit: ignore terminating NUL in AUDIT_USER_TTY messages Audit: fix handling of 'strings' with NULL characters make the e->rule.xxx shorter in kernel auditfilter.c auditsc: fix kernel-doc notation audit: EXECVE record - removed bogus newline
-
