- 03 Jul, 2018 40 commits
-
-
David Rivshin authored
commit 76ed0b80 upstream. NUMREGBYTES (which is used as the size for gdb_regs[]) is incorrectly based on DBG_MAX_REG_NUM instead of GDB_MAX_REGS. DBG_MAX_REG_NUM is the number of total registers, while GDB_MAX_REGS is the number of 'unsigned longs' it takes to serialize those registers. Since FP registers require 3 'unsigned longs' each, DBG_MAX_REG_NUM is smaller than GDB_MAX_REGS. This causes GDB 8.0 give the following error on connect: "Truncated register 19 in remote 'g' packet" This also causes the register serialization/deserialization logic to overflow gdb_regs[], overwriting whatever follows. Fixes: 834b2964 ("kgdb,arm: fix register dump") Cc: <stable@vger.kernel.org> # 2.6.37+ Signed-off-by:
David Rivshin <drivshin@allworx.com> Acked-by:
Rabin Vincent <rabin@rab.in> Tested-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vaibhav Jain authored
commit b6c84ba2 upstream. Currently we see a kernel-oops reported on Power-9 while attaching a context to an AFU, with radix-mode and sysfs attr 'prefault_mode' set to anything other than 'none'. The backtrace of the oops is of this form: Unable to handle kernel paging request for data at address 0x00000080 Faulting instruction address: 0xc00800000bcf3b20 cpu 0x1: Vector: 300 (Data Access) at [c00000037f003800] pc: c00800000bcf3b20: cxl_load_segment+0x178/0x290 [cxl] lr: c00800000bcf39f0: cxl_load_segment+0x48/0x290 [cxl] sp: c00000037f003a80 msr: 9000000000009033 dar: 80 dsisr: 40000000 current = 0xc00000037f280000 paca = 0xc0000003ffffe600 softe: 3 irq_happened: 0x01 pid = 3529, comm = afp_no_int <snip> cxl_prefault+0xfc/0x248 [cxl] process_element_entry_psl9+0xd8/0x1a0 [cxl] cxl_attach_dedicated_process_psl9+0x44/0x130 [cxl] native_attach_process+0xc0/0x130 [cxl] afu_ioctl+0x3f4/0x5e0 [cxl] do_vfs_ioctl+0xdc/0x890 ksys_ioctl+0x68/0xf0 sys_ioctl+0x40/0xa0 system_call+0x58/0x6c The issue is caused as on Power-8 the AFU attr 'prefault_mode' was used to improve initial storage fault performance by prefaulting process segments. However on Power-9 with radix mode we don't have Storage-Segments that we can prefault. Also prefaulting process Pages will be too costly and fine-grained. Hence, since the prefaulting mechanism doesn't makes sense of radix-mode, this patch updates prefault_mode_store() to not allow any other value apart from CXL_PREFAULT_NONE when radix mode is enabled. Fixes: f24be42a ("cxl: Add psl9 specific code") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Finley Xiao authored
commit 9e59c5f6 upstream. Solve the pd could only ever turn off but never turn them on again, if the pd registers have the writemask bits. So far this affects the rk3328 only. Fixes: 79bb17ce ("soc: rockchip: power-domain: Support domain control in hiword-registers") Cc: stable@vger.kernel.org Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by:
Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Mahesh Salgaonkar authored
commit 722cde76 upstream. Unregister fadump on kexec down path otherwise the fadump registration in new kexec-ed kernel complains that fadump is already registered. This makes new kernel to continue using fadump registered by previous kernel which may lead to invalid vmcore generation. Hence this patch fixes this issue by un-registering fadump in fadump_cleanup() which is called during kexec path so that new kernel can register fadump with new valid values. Fixes: b500afff ("fadump: Invalidate registration and release reserved memory for general use.") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
commit 0a4ec6aa upstream. The commit 78eaa10f ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") introduced a timeout for the snooze idle state so that it could be eventually be promoted to a deeper idle state. The snooze timeout value is static and set to the target residency of the next idle state, which would train the cpuidle governor to pick the next idle state eventually. The unfortunate side-effect of this is that if the next idle state(s) is disabled, the CPU will forever remain in snooze, despite the fact that the system is completely idle, and other deeper idle states are available. This patch fixes the issue by dynamically setting the snooze timeout to the target residency of the next enabled state on the device. Before Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01297 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 96.41| 0.00| 0.00 0| 8| 1| 96.43| 0.00| 0.00 0| 8| 2| 96.47| 0.00| 0.00 0| 8| 3| 96.35| 0.00| 0.00 0| 8| 4| 96.37| 0.00| 0.00 0| 8| 5| 96.37| 0.00| 0.00 0| 8| 6| 96.47| 0.00| 0.00 0| 8| 7| 96.47| 0.00| 0.00 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.05033 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 16| 0| 89.79| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 1| 90.12| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 2| 90.21| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 3| 90.29| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 After Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01200 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 16.58| 0.00| 77.21 0| 8| 1| 18.42| 0.00| 75.38 0| 8| 2| 4.70| 0.00| 94.09 0| 8| 3| 17.06| 0.00| 81.73 0| 8| 4| 3.06| 0.00| 95.73 0| 8| 5| 7.00| 0.00| 96.80 0| 8| 6| 1.00| 0.00| 98.79 0| 8| 7| 5.62| 0.00| 94.17 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.02110 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 0| 0| 0.69| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 9.39| 89.70 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.05| 93.21 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 89.93 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 93.26 Fixes: 78eaa10f ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Akshay Adiga authored
commit ac9816dc upstream. Init all present cpus for deep states instead of "all possible" cpus. Init fails if a possible cpu is guarded. Resulting in making only non-deep states available for cpuidle/hotplug. Stewart says, this means that for single threaded workloads, if you guard out a CPU core you'll not get WoF (Workload Optimised Frequency), which means that performance goes down when you wouldn't expect it to. Fixes: 77b54e9f ("powernv/powerpc: Add winkle support for offline cpus") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Signed-off-by:
-
Haren Myneni authored
commit 75743649 upstream. NX can set the 3rd bit in CR register for XER[SO] (Summary overflow) which is not related to paste request. The current paste function returns failure for a successful request when this bit is set. So mask this bit and check the proper return status. Fixes: 2392c8c8 ("powerpc/powernv/vas: Define copy/paste interfaces") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Haren Myneni <haren@us.ibm.com> Signed-off-by:
-
Alexey Kardashevskiy authored
commit 98fd72fe upstream. When IODA2 creates a PE, it creates an IOMMU table with it_ops::free set to pnv_ioda2_table_free() which calls pnv_pci_ioda2_table_free_pages(). Since iommu_tce_table_put() calls it_ops::free when the last reference to the table is released, explicit call to pnv_pci_ioda2_table_free_pages() is not needed so let's remove it. This should fix double free in the case of PCI hotuplug as pnv_pci_ioda2_table_free_pages() does not reset neither iommu_table::it_base nor ::it_size. This was not exposed by SRIOV as it uses different code path via pnv_pcibios_sriov_disable(). IODA1 does not inialize it_ops::free so it does not have this issue. Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Michael Neuling authored
commit cd6ef7ee upstream. Back when we first introduced the DAWR, in commit 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges"), we screwed up the constraint making it a 1024 byte boundary rather than a 512. This makes the check overly permissive. Fortunately GDB is the only real user and it always did they right thing, so we never noticed. This fixes the constraint to 512 bytes. Fixes: 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Anju T Sudhakar authored
commit d2032678 upstream. Currently memory is allocated for core-imc based on cpu_present_mask, which has bit 'cpu' set iff cpu is populated. We use (cpu number / threads per core) as the array index to access the memory. Under some circumstances firmware marks a CPU as GUARDed CPU and boot the system, until cleared of errors, these CPU's are unavailable for all subsequent boots. GUARDed CPUs are possible but not present from linux view, so it blows a hole when we assume the max length of our allocation is driven by our max present cpus, where as one of the cpus might be online and be beyond the max present cpus, due to the hole. So (cpu number / threads per core) value bounds the array index and leads to memory overflow. Call trace observed during a guard test: Faulting instruction address: 0xc000000000149f1c cpu 0x69: Vector: 380 (Data Access Out of Range) at [c000003fea303420] pc:c000000000149f1c: prefetch_freepointer+0x14/0x30 lr:c00000000014e0f8: __kmalloc+0x1a8/0x1ac sp:c000003fea3036a0 msr:9000000000009033 dar:c9c54b2c91dbf6b7 current = 0xc000003fea2c0000 paca = 0xc00000000fddd880 softe: 3 irq_happened: 0x01 pid = 1, comm = swapper/104 Linux version 4.16.7-openpower1 (smc@smc-desktop) (gcc version 6.4.0 (Buildroot 2018.02.1-00006-ga8d1126)) #2 SMP Fri May 4 16:44:54 PDT 2018 enter ? for help call trace: __kmalloc+0x1a8/0x1ac (unreliable) init_imc_pmu+0x7f4/0xbf0 opal_imc_counters_probe+0x3fc/0x43c platform_drv_probe+0x48/0x80 driver_probe_device+0x22c/0x308 __driver_attach+0xa0/0xd8 bus_for_each_dev+0x88/0xb4 driver_attach+0x2c/0x40 bus_add_driver+0x1e8/0x228 driver_register+0xd0/0x114 __platform_driver_register+0x50/0x64 opal_imc_driver_init+0x24/0x38 do_one_initcall+0x150/0x15c kernel_init_freeable+0x250/0x254 kernel_init+0x1c/0x150 ret_from_kernel_thread+0x5c/0xc8 Allocating memory for core-imc based on cpu_possible_mask, which has bit 'cpu' set iff cpu is populatable, will fix this issue. Reported-by:
Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
-
Michael Neuling authored
commit 4f7c06e2 upstream. In commit e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") we fixed setting the DAWR end point to its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint. PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to zero (memset() in hw_breakpoint_init()). This worked with arch_validate_hwbkpt_settings() before the above patch was applied but is now broken if the breakpoint is 512byte aligned. This sets the length of the breakpoint to 8 bytes when using PTRACE_SET_DEBUGREG. Fixes: e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by:
-
Aneesh Kumar K.V authored
commit 91d06971 upstream. Currently we do not have an isync, or any other context synchronizing instruction prior to the slbie/slbmte in _switch() that updates the SLB entry for the kernel stack. However that is not correct as outlined in the ISA. From Power ISA Version 3.0B, Book III, Chapter 11, page 1133: "Changing the contents of ... the contents of SLB entries ... can have the side effect of altering the context in which data addresses and instruction addresses are interpreted, and in which instructions are executed and data accesses are performed. ... These side effects need not occur in program order, and therefore may require explicit synchronization by software. ... The synchronizing instruction before the context-altering instruction ensures that all instructions up to and including that synchronizing instruction are fetched and executed in the context that existed before the alteration." And page 1136: "For data accesses, the context synchronizing instruction before the slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures that all preceding instructions that access data storage have completed to a point at which they have reported all exceptions they will cause." We're not aware of any bugs caused by this, but it should be fixed regardless. Add the missing isync when updating kernel stack SLB entry. Cc: stable@vger.kernel.org Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Flesh out change log with more ISA text & explanation] Signed-off-by:
-
Miklos Szeredi authored
commit 6becdb60 upstream. syzbot is reporting NULL pointer dereference at fuse_ctl_remove_conn() [1]. Since fc->ctl_ndents is incremented by fuse_ctl_add_conn() when new_inode() failed, fuse_ctl_remove_conn() reaches an inode-less dentry and tries to clear d_inode(dentry)->i_private field. Fix by only adding the dentry to the array after being fully set up. When tearing down the control directory, do d_invalidate() on it to get rid of any mounts that might have been added. [1] https://syzkaller.appspot.com/bug?id=f396d863067238959c91c0b7cfc10b163638cac6Reported-by:
syzbot <syzbot+32c236387d66c4516827@syzkaller.appspotmail.com> Fixes: bafa9654 ("[PATCH] fuse: add control filesystem") Cc: <stable@vger.kernel.org> # v2.6.18 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Tetsuo Handa authored
commit 543b8f86 upstream. syzbot is reporting use-after-free at fuse_kill_sb_blk() [1]. Since sb->s_fs_info field is not cleared after fc was released by fuse_conn_put() when initialization failed, fuse_kill_sb_blk() finds already released fc and tries to hold the lock. Fix this by clearing sb->s_fs_info field after calling fuse_conn_put(). [1] https://syzkaller.appspot.com/bug?id=a07a680ed0a9290585ca424546860464dd9658dbSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+ec3986119086fe4eec97@syzkaller.appspotmail.com> Fixes: 3b463ae0 ("fuse: invalidation reverse calls") Cc: John Muir <john@jmuir.com> Cc: Csaba Henk <csaba@gluster.com> Cc: Anand Avati <avati@redhat.com> Cc: <stable@vger.kernel.org> # v2.6.31 Signed-off-by:
-
Miklos Szeredi authored
commit df0e91d4 upstream. Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the O_TRUNC flag in the OPEN request to truncate the file atomically with the open. In this mode there's no need to send a SETATTR request to userspace after the open, so fuse_do_setattr() checks this mode and returns. But this misses the important step of truncating the pagecache. Add the missing parts of truncation to the ATTR_OPEN branch. Reported-by:
Chad Austin <chadaustin@fb.com> Fixes: 6ff958ed ("fuse: add atomic open+truncate support") Signed-off-by:
-
Tejun Heo authored
commit 8a301eb1 upstream. If a connection gets aborted while congested, FUSE can leave nr_wb_congested[] stuck until reboot causing wait_iff_congested() to wait spuriously which can lead to severe performance degradation. The leak is caused by gating congestion state clearing with fc->connected test in request_end(). This was added way back in 2009 by 26c36791 ("fuse: destroy bdi on umount"). While the commit description doesn't explain why the test was added, it most likely was to avoid dereferencing bdi after it got destroyed. Since then, bdi lifetime rules have changed many times and now we're always guaranteed to have access to the bdi while the superblock is alive (fc->sb). Drop fc->connected conditional to avoid leaking congestion states. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Joshua Miller <joshmiller@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org # v2.6.29+ Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Tetsuo Handa authored
commit 988a35f8 upstream. I noticed that there is a possibility that printk_safe_log_store() causes kernel oops because "args" parameter is passed to vsnprintf() again when atomic_cmpxchg() detected that we raced. Fix this by using va_copy(). Link: http://lkml.kernel.org/r/201805112002.GIF21216.OFVHFOMLJtQFSO@I-love.SAKURA.ne.jp Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: dvyukov@google.com Cc: syzkaller@googlegroups.com Cc: fengguang.wu@intel.com Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Amit Pundir authored
commit 7dc5fe08 upstream. AOSP use userspace firmware loader to load firmwares, which will return -EAGAIN in case qca/rampatch_00440302.bin is not found. Since there is no rampatch for dragonboard820c QCA controller revision, just make it work as is. CC: Loic Poulain <loic.poulain@linaro.org> CC: Nicolas Dechesne <nicolas.dechesne@linaro.org> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johan Hedberg <johan.hedberg@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Corey Minyard authored
commit fe50a7d0 upstream. There was one place where the timeout value for an operation was not being set, if a capabilities request was done from idle. Move the timeout value setting to before where that change might be requested. IMHO the cause here is the invisible returns in the macros. Maybe that's a job for later, though. Reported-by:
Nordmark Claes <Claes.Nordmark@tieto.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
commit 2026d357 upstream. The function __builtin_expect returns long type (see the gcc documentation), and so do macros likely and unlikely. Unfortunatelly, when CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and unlikely expand to __branch_check__ and __branch_check__ truncates the long type to int. This unintended truncation may cause bugs in various kernel code (we found a bug in dm-writecache because of it), so it's better to fix __branch_check__ to return long. Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1805300818140.24812@file01.intranet.prod.int.rdu2.redhat.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 1f0d69a9 ("tracing: profile likely and unlikely annotations") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Matthias Schiffer authored
commit 6fb86566 upstream. ftrace_graph_caller was never run after calling ftrace_trace_function, breaking the function graph tracer. Fix this, bringing it in line with the x86 implementation. While we're at it, also streamline the control flow of _mcount a bit to reduce the number of branches. This issue was reported before: https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.htmlSigned-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Tested-by:
Matt Redfearn <matt.redfearn@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/18929/Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 756b56a9 upstream. The trigger code is picky in how it can be disabled as there may be dependencies between different events and synthetic events. Change the order on how triggers are reset. 1) Reset triggers of all synthetic events first 2) Remove triggers with actions attached to them 3) Remove all other triggers If this order isn't followed, then some triggers will not be reset, and an error may happen because a trigger is busy. Cc: stable@vger.kernel.org Fixes: cfa0963d ("kselftests/ftrace : Add event trigger testcases") Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit 666902e4 upstream. "%pCr" formats the current rate of a clock, and calls clk_get_rate(). The latter obtains a mutex, hence it must not be called from atomic context. Remove support for this rarely-used format, as vsprintf() (and e.g. printk()) must be callable from any context. Any remaining out-of-tree users will start seeing the clock's name printed instead of its rate. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 900cca29 ("lib/vsprintf: add %pC{,n,r} format specifiers for clocks") Link: http://lkml.kernel.org/r/1527845302-12159-5-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.1+ Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Geert Uytterhoeven authored
commit ef4b0be6 upstream. Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by open-coding the operation. This is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-2-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit bd2a07f7 upstream. Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by printing the variable that already holds the clock rate. Note that calling clk_get_rate() is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-3-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.12+ Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Alexander Sverdlin authored
commit 5d302ed3 upstream. According to "EP93xx User’s Guide", I2STXLinCtrlData and I2SRXLinCtrlData registers actually have different format. The only currently used bit (Left_Right_Justify) has different position. Fix this and simplify the whole setup taking into account the fact that both registers have zero default value. The practical effect of the above is repaired SND_SOC_DAIFMT_RIGHT_J support (currently unused). Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexander Sverdlin authored
commit 2d534113 upstream. The bit responsible for LRCLK polarity is i2s_tlrs (0), not i2s_trel (2) (refer to "EP93xx User's Guide"). Previously card drivers which specified SND_SOC_DAIFMT_NB_IF actually got SND_SOC_DAIFMT_NB_NF, an adaptation is necessary to retain the old behavior. Signed-off-by:
-
Paul Handrigan authored
commit 6a6ad7fa upstream. Add the use_single_rw flag to regmap config since the device does not support bulk transactions over i2c. Signed-off-by:
Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by:
-
Srinivas Kandagatla authored
commit ff2faf12 upstream. dapm_kcontrol_data is freed as part of dapm_kcontrol_free(), leaving the paths pointer dangling in the list. This leads to system crash when we try to unload and reload sound card. I hit this bug during ADSP crash/reboot test case on Dragon board DB410c. Without this patch, on SLAB Poisoning enabled build, kernel crashes with "BUG kmalloc-128 (Tainted: G W ): Poison overwritten" Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Ingo Flaschberger authored
commit 065c0956 upstream. 1wire family module autoload fails because of upper/lower case mismatch. Signed-off-by:
Ingo Flaschberger <ingo.flaschberger@gmail.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Maxim Moseychuk authored
commit 6e01827e upstream. Some low-speed and full-speed devices (for example, bluetooth) do not have time to initialize. For them, ETIMEDOUT is a valid error. We need to give them another try. Otherwise, they will never be initialized correctly and in dmesg will be messages "Bluetooth: hci0 command 0x1002 tx timeout" or similars. Fixes: 264904cc ("usb: retry reset if a device times out") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Maxim Moseychuk <franchesko.salias.hudro.pedros@gmail.com> Signed-off-by:
-
Waldemar Rymarkiewicz authored
commit c5c2a97b upstream. This commit fixes a rare but possible case when the clk rate is updated without update of the regulator voltage. At boot up, CPUfreq checks if the system is running at the right freq. This is a sanity check in case a bootloader set clk rate that is outside of freq table present with cpufreq core. In such cases system can be unstable so better to change it to a freq that is preset in freq-table. The CPUfreq takes next freq that is >= policy->cur and this is our target_freq that needs to be set now. dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the old_freq (a current rate). If these are equal it returns early. If not, it searches for OPP (old_opp) that fits best to old_freq (not listed in the table) and updates old_freq (!). Here, we can end up with old_freq = old_opp.rate = target_freq, which is not handled in _generic_set_opp_regulator(). It's supposed to update voltage only when freq > old_freq || freq > old_freq. if (freq > old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); [...] if (freq < old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) It results in, no voltage update while clk rate is updated. Example: freq-table = { 1000MHz 1.15V 666MHZ 1.10V 333MHz 1.05V } boot-up-freq = 800MHz # not listed in freq-table freq = target_freq = 1GHz old_freq = 800Mhz old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!) old_freq = 1GHz Fixes: 6a0712f6 ("PM / OPP: Add dev_pm_opp_set_rate()") Cc: 4.6+ <stable@vger.kernel.org> # v4.6+ Signed-off-by:
Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 47e5abfb upstream. If a device link is added via device_link_add() by the driver of the link's consumer device, the supplier's runtime PM usage counter is going to be dropped by the pm_runtime_put_suppliers() call in driver_probe_device(). However, in that case it is not incremented unless the supplier driver is already present and the link is not stateless. That leads to a runtime PM usage counter imbalance for the supplier device in a few cases. To prevent that from happening, bump up the supplier runtime PM usage counter in device_link_add() for all links with the DL_FLAG_PM_RUNTIME flag set that are added at the consumer probe time. Use pm_runtime_get_noresume() for that as the callers of device_link_add() who want the supplier to be resumed by it are expected to pass DL_FLAG_RPM_ACTIVE in flags to it anyway, but additionally resume the supplier if the link is added during consumer driver probe to retain the existing behavior for the callers depending on it. Fixes: 21d5c57b (PM / runtime: Use device links) Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Ulf Hansson authored
commit 72038df3 upstream. In case the PM domain fails to be powered on in genpd_dev_pm_attach(), it returns -EPROBE_DEFER, but keeping the device attached to its PM domain. This leads to problems when the next attempt to attach is re-tried. More precisely, in that situation an -EEXIST error code is returned, because the device already has its PM domain pointer assigned, from the first attempt. Now, because of the sloppy error handling by the existing callers of dev_pm_domain_attach(), probing is allowed to continue when -EEXIST is returned. However, in such case there are no guarantees that the PM domain is powered on by genpd, which may lead to hangs when buses/drivers tried to access their devices. Let's fix this behaviour, simply by detaching the device when powering on fails in genpd_dev_pm_attach(). Cc: v4.11+ <stable@vger.kernel.org> # v4.11+ Signed-off-by:
-
Eric W. Biederman authored
commit 7de712cc upstream. While working on changing this code to use force_sig_fault I discovered that do_unaliged_user is sets si_signo to SIGBUS and passes SIGSEGV to force_sig_info. Which is just b0rked. The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS. Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org Cc: stable@vger.kernel.org Acked-by:
Max Filippov <jcmvbkbc@gmail.com> Fixes: 5a0015d6 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Daniel Wagner authored
commit 8afb1d2c upstream. Commit 40f70c03 ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Daniel Wagner <daniel.wagner@siemens.com> Reviewed-by:
-
Finn Thain authored
commit 3e2816c1 upstream. The resource size is 0x2000 == end - start + 1. Therefore end == start + 0x2000 - 1. Cc: Laurent Vivier <lvivier@redhat.com> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Michael Schmitz authored
commit 3f90f9ef upstream. If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap between mappings which is added to the vm_struct representing the mapping. __ioremap() uses the actual requested size (after alignment), while __iounmap() is passed the size from the vm_struct. On 020/030, early termination descriptors are used to set up mappings of extent 'size', which are validated on unmapping. The unmapped gap of size IO_SIZE defeats the sanity check of the pmd tables, causing __iounmap() to loop forever on 030. On 040/060, unmapping of page table entries does not check for a valid mapping, so the umapping loop always completes there. Adjust size to be unmapped by the gap that had been added in the vm_struct prior. This fixes the hang in atari_platform_init() reported a long time ago, and a similar one reported by Finn recently (addressed by removing ioremap() use from the SWIM driver. Tested on my Falcon in 030 mode - untested but should work the same on 040/060 (the extra page tables cleared there would never have been set up anyway). Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> [geert: Minor commit description improvements] [geert: This was fixed in 2.4.23, but not in 2.5.x] Signed-off-by:
-
Siarhei Liakh authored
commit 3ae6295c upstream. fpu__drop() has an explicit fwait which under some conditions can trigger a fixable FPU exception while in kernel. Thus, we should attempt to fixup the exception first, and only call notify_die() if the fixup failed just like in do_general_protection(). The original call sequence incorrectly triggers KDB entry on debug kernels under particular FPU-intensive workloads. Andy noted, that this makes the whole conditional irq enable thing even more inconsistent, but fixing that it outside the scope of this. Signed-off-by:
Siarhei Liakh <siarhei.liakh@concurrent-rt.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Borislav Petkov" <bpetkov@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/DM5PR11MB201156F1CAB2592B07C79A03B17D0@DM5PR11MB2011.namprd11.prod.outlook.comSigned-off-by:
-
Borislav Petkov authored
commit 1f74c8a6 upstream. mce_no_way_out() does a quick check during #MC to see whether some of the MCEs logged would require the kernel to panic immediately. And it passes a struct mce where MCi_STATUS gets written. However, after having saved a valid status value, the next iteration of the loop which goes over the MCA banks on the CPU, overwrites the valid status value because we're using struct mce as storage instead of a temporary variable. Which leads to MCE records with an empty status value: mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000 mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10} In order to prevent the loss of the status register value, return immediately when severity is a panic one so that we can panic immediately with the first fatal MCE logged. This is also the intention of this function and not to noodle over the banks while a fatal MCE is already logged. Tony: read the rest of the MCA bank to populate the struct mce fully. Suggested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
