The pointer desc is being null checked twice, the second null check
is redundant because desc has not been re-assigned between the
checks. Remove the redundant second null check on desc.

Fixes: ef6fb2d6 ("dmaengine: dw-axi-dmac: simplify descriptor management")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210203134652.22618-1-colin.king@canonical.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use GFP_NOWAIT allocation in xilinx_dma_alloc_tx_descriptor().

This is necessary for compatibility with ALSA, which calls
dmaengine_prep_dma_cyclic() from an atomic context.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210129170800.31857-1-rf@opensource.cirrus.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

AxiDMA driver exposed the dma_set_max_seg_size() to the DMAENGINE.
It shall helps the DMA clients to create size-optimized linked-list
for the controller.

However, there are certain situations where DMA client might not be
abled to benefit from the dma_get_max_seg_size() if the segment size
can't meet the nature of the DMA client's operation.

In the case of ALSA operation, ALSA application and driver expecting
to run in a period of larger than 10ms regardless of the bit depth.
With this large period, there is a strong request to split the linked-list
in the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-18-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for DMA Scatter-Gather (SG) constraint so that DMA clients can
handle the AxiDMA limitation.

Without supporting DMA constraint the default Max segment size reported by
dmaengine is 64KB, which is not supported by Intel KeemBay AxiDMA.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-17-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for Intel KeemBay AxiDMA BYTE and HALFWORD registers
programming.

Intel KeemBay AxiDMA supports data transfer between device to memory
and memory to device operations.

This code is needed by I2C, I3C, I2S, SPI and UART which uses FIFO
size of 8bits and 16bits to perform memory to device data transfer
operation. 0-padding functionality is provided to avoid
pre-processing of data on CPU.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-16-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for Intel KeemBay AxiDMA device handshake programming.
Device handshake number passed in to the AxiDMA shall be written to
the Intel KeemBay AxiDMA hardware handshake registers before DMA
operations are started.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-15-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for Intel KeemBay AxiDMA to the .compatible field.
The AxiDMA Apb region will be accessible if the compatible string
matches the "intel,kmb-axi-dma".
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-14-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

If HAS_IOMEM is not defined and DW_AXI_DMAC is enabled under COMPILE_TEST,
the build fails with the following error:
dw-axi-dmac-platform.c:(.text+0xc4): undefined reference to
`devm_ioremap_resource'
Link: https://www.spinics.net/lists/dmaengine/msg25188.htmlReported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210125013255.25799-13-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for Intel KeemBay DMA registers. These registers are required
to run data transfer between device to memory and memory to device on Intel
KeemBay SoC.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-12-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for Intel KeemBay AxiDMA to the dw-axi-dmac
Schemas DT binding.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210125013255.25799-11-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for DMA_RESIDUE_GRANULARITY_BURST so that AxiDMA can report
DMA residue.

Existing AxiDMA driver only support data transfer between
memory to memory operation, therefore reporting DMA residue
to the DMA clients is not supported.

Reporting DMA residue to the DMA clients is important as DMA clients
shall invoke dmaengine_tx_status() to understand the number of bytes
been transferred so that the buffer pointer can be updated accordingly.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-10-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for of_dma_controller_register() so that DMA clients
can pass in device handshake number to the AxiDMA driver.

DMA clients shall code the device handshake number in the Device tree.
When DMA activities are needed, DMA clients shall invoke OF helper
function to pass in the device handshake number to the AxiDMA.

Without register to the of_dma_controller_register(), data transfer
between memory to device and device to memory operations would failed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-9-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for device_prep_dma_cyclic() callback function to benefit
DMA cyclic client, for example ALSA.

Existing AxiDMA driver only support data transfer between memory to memory.
Data transfer between device to memory and memory to device in cyclic mode
would failed if this interface is not supported by the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-8-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add device_prep_slave_sg() callback function so that DMA_MEM_TO_DEV
and DMA_DEV_TO_MEM operations in single mode can be supported.

Existing AxiDMA driver only support data transfer between
memory to memory. Data transfer between device to memory and
memory to device in single mode would failed if this interface
is not supported by the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-7-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add device_config() callback function so that the device address
can be passed to the dma driver.

DMA clients use this interface to pass in the device address to the
AxiDMA. Without this interface, data transfer between device to memory
and memory to device would failed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-6-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for device_synchronize() callback function to sync with
dmaengine_terminate_sync().
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-5-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The DMA memory block is created at driver load time and exist for
device lifetime. Move the dma_pool_create() to the ->chan_resource()
callback function allowing the DMA memory blocks to be created as needed
and destroyed when the channel is freed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-4-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify and refactor the descriptor management by removing the redundant
Linked List Item (LLI) queue control logic from the AxiDMA driver.
The descriptor is split into virtual descriptor and hardware LLI so that
only hardware LLI memories are allocated from the DMA memory pool.

Up to 64 descriptors can be allocated within a PAGE_SIZE compare to 16
descriptors in previous version. This solves the problem where an
ALSA driver expects more than 16 DMA descriptors to run.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-3-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

YAML schemas Device Tree (DT) binding is the new format for DT to replace
the old format. Introduce YAML schemas DT binding for dw-axi-dmac and
remove the old version.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210125013255.25799-2-jee.heng.sia@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Optimize struct psil_endpoint_config for size by
- reordering fields
- grouping bitfields
- change mapped_channel_id type to s16 (32K channel is enough)
- default_flow_id type to s16 as it's assigned to -1

before:
text            data     bss    dec	        hex	filename
12654100	5211472	 666904	18532476	11ac87c	vmlinux

after:
12654100	5208528	 666904	18529532	11abcfc	vmlinux

diff: 2944 bytes
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20210129193117.28833-1-grygorii.strashko@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The Intel Lightning Mountain (LGM) DMA controller is only present on
Intel Lightning Mountain SoCs.  Hence add a dependency on X86, to
prevent asking the user about this driver when configuring a kernel
without Intel Lightning Mountain platform support.

While at it, fix a misspelling of "Intel".

Fixes: 32d31c79 ("dmaengine: Add Intel LGM SoC DMA support.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210129131702.2656060-1-geert+renesas@glider.beSigned-off-by: Vinod Koul <vkoul@kernel.org>

The DMACs (both SYS-DMAC and RT-DMAC) on R-Car V3U differ slightly from
the DMACs on R-Car Gen2 and other R-Car Gen3 SoCs:
  1. The per-channel registers are located in a second register block.
     Add support for mapping the second block, using the appropriate
     offsets and stride.
  2. The common Channel Clear Register (DMACHCLR) was replaced by a
     per-channel register.
     Update rcar_dmac_chan_clear{,_all}() to handle this.
     As rcar_dmac_init() needs to clear the status before the individual
     channels are probed, channel index and base address initialization
     are moved forward.

Inspired by a patch in the BSP by Phong Hoang
<phong.hoang.wz@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-5-geert+renesas@glider.beSigned-off-by: Vinod Koul <vkoul@kernel.org>

Extract the code to clear the status of one or all channels into their
own helpers, to prepare for the different handling of the R-Car V3U SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-4-geert+renesas@glider.beSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add a helper macro for iterating over all DMAC channels, taking into
account the channel mask.  Use it where appropriate, to simplify code.

Restore "reverse Christmas tree" order of local variables while adding a
new variable.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-3-geert+renesas@glider.beSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document the compatible value for the Direct Memory Access Controller
blocks in the Renesas R-Car V3U (R8A779A0) SoC.

The most visible difference with DMAC blocks on other R-Car SoCs is the
move of the per-channel registers to a separate register block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-2-geert+renesas@glider.beSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix misspelling of "physical".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210126205906.2918099-1-helgaas@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

When bam dma is "controlled remotely", thus far clocks were not controlled
from the Linux. In this scenario, Linux was disabling runtime pm in bam dma
driver and not doing any clock management in suspend/resume hooks.

With introduction of crypto engine bam dma, the clock is a rpmh resource
that can be controlled from both Linux and TZ/remote side.  Now bam dma
clock is getting enabled during probe even though the bam dma can be
"controlled remotely". But due to clocks not being handled properly,
bam_suspend generates a unbalanced clk_unprepare warning during system
suspend.

To fix the above issue and to enable proper clock-management, this patch
enables runtim-pm and handles bam dma clocks in suspend/resume hooks if
the clock node is present irrespective of controlled_remotely property.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210126211859.790892-1-thara.gopinath@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add a module parameter that overrides the SVA feature enabling. This keeps
the driver in legacy mode even when intel_iommu=sm_on is set. In this mode,
the descriptor fields must be programmed with dma_addr_t from the Linux DMA
API for source, destination, and completion descriptors.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161134110457.4005461.13171197785259115852.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is no reason the Marvell MMP two-channel audio DMA driver would have
to be built-in.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121110356.1768635-4-lkundrak@v3.skSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is no reason the Marvell MMP peripheral DMA driver would have
to be built-in.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121110356.1768635-3-lkundrak@v3.skSigned-off-by: Vinod Koul <vkoul@kernel.org>

It's not used anywhere -- drop it.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121110356.1768635-2-lkundrak@v3.skSigned-off-by: Vinod Koul <vkoul@kernel.org>

The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210120131859.2056308-4-arnd@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The zte zx platform is getting removed, so this driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20210120131859.2056308-3-arnd@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120131859.2056308-2-arnd@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The $ref for "intel,dma-poll-cnt" is missing an '/', causing
dt_binding_check to fail. Fix this.

Fixes: afd4df85 ("dt-bindings: dma: Add bindings for Intel LGM SoC")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210120180939.1580984-1-bjorn.andersson@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

[1] mentions the IOAT entry contains dmaengine subsystem file. So update
the entry and remove the dmaengine files

1: https://lwn.net/Articles/842415/

Link: https://lore.kernel.org/r/20210117070229.2537866-1-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Somehow dmaengine header files are missed in the entry so update it

Link: https://lore.kernel.org/r/20210117070804.2539698-1-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for the JZ4760 and JZ4760B SoCs.

Both SoCs have only 5 DMA channels per chip. The JZ4760B introduced the
DCKES/DCKEC registers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210120105322.16116-2-paul@crapouillou.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add ingenic,jz4760-dma and ingenic,jz4760b-dma compatible strings to
support the DMA engines present in the JZ4760 and JZ4760B SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210120105322.16116-1-paul@crapouillou.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use of_device_get_match_data() to make the code simpler.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210118121549.1625217-2-festevam@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>