- 30 Apr, 2014 27 commits
-
-
Mikulas Patocka authored
commit 00a9d699 upstream. The function cfb_copyarea is buggy when the copy operation is not aligned on long boundary (4 bytes on 32-bit machines, 8 bytes on 64-bit machines). How to reproduce: - use x86-64 machine - use a framebuffer driver without acceleration (for example uvesafb) - set the framebuffer to 8-bit depth (for example fbset -a 1024x768-60 -depth 8) - load a font with character width that is not a multiple of 8 pixels note: the console-tools package cannot load a font that has width different from 8 pixels. You need to install the packages "kbd" and "console-terminus" and use the program "setfont" to set font width (for example: setfont Uni2-Terminus20x10) - move some text left and right on the bash command line and you get a screen corruption To expose more bugs, put this line to the end of uvesafb_init_info: info->flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_READS_FAST; - Now framebuffer console will use cfb_copyarea for console scrolling. You get a screen corruption when console is scrolled. This patch is a rewrite of cfb_copyarea. It fixes the bugs, with this patch, console scrolling in 8-bit depth with a font width that is not a multiple of 8 pixels works fine. The cfb_copyarea code was very buggy and it looks like it was written and never tried with non-8-pixel font. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Mikulas Patocka authored
commit a772d473 upstream. When X11 is running and the user switches back to console, the card modifies the content of registers M_MACCESS and M_PITCH in periodic intervals. This patch fixes it by restoring the content of these registers before issuing any accelerator command. Signed-off-by:
-
Will Deacon authored
commit b6ccb980 upstream. CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do not have hardware thread registers. The lack of these registers requires the kernel to update the vectors page at each context switch in order to write a new TLS pointer. This write must be done via the userspace mapping, since aliasing caches can lead to expensive flushing when using kmap. Finally, this requires the vectors page to be mapped r/w for kernel and r/o for user, which has implications for things like put_user which must trigger CoW appropriately when targetting user pages. The upshot of all this is that a v6/v7 kernel makes use of domains to segregate kernel and user memory accesses. This has the nasty side-effect of making device mappings executable, which has been observed to cause subtle bugs on recent cores (e.g. Cortex-A15 performing a speculative instruction fetch from the GIC and acking an interrupt in the process). This patch solves this problem by removing the remaining domain support from ARMv6. A new memory type is added specifically for the vectors page which allows that page (and only that page) to be mapped as user r/o, kernel r/w. All other user r/o pages are mapped also as kernel r/o. Patch co-developed with Russell King. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> [bwh: Backported to 3.2: - Adjust filename, context - Drop condition on CONFIG_ARM_LPAE] Signed-off-by:
-
Will Deacon authored
commit 26ffd0d4 upstream. PROT_NONE mappings apply the page protection attributes defined by _P000 which translate to PAGE_NONE for ARM. These attributes specify an XN, RDONLY pte that is inaccessible to userspace. However, on kernels configured without support for domains, such a pte *is* accessible to the kernel and can be read via get_user, allowing tasks to read PROT_NONE pages via syscalls such as read/write over a pipe. This patch introduces a new software pte flag, L_PTE_NONE, that is set to identify faulting, present entries. Signed-off-by:
-
David Fries authored
commit 6b355b33 upstream. Previous logic, if (avail > 8) { store slave; return; } send data; clear; The logic error is, if there isn't space send the buffer and clear, but the slave wasn't added to the now empty buffer loosing that slave id. It also should have been "if (avail >= 8)" because when it is 8, there is space. Instead, if there isn't space send and clear the buffer, then there is always space for the slave id. Signed-off-by:
David Fries <David@Fries.net> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jani Nikula authored
commit 0f540c3a upstream. Since commit ee1452d7 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Sep 20 15:05:30 2013 +0300 drm/i915: assume all GM45 Acer laptops use inverted backlight PWM failed and was later reverted in commit be505f64 Author: Alexander van Heukelum <heukelum@fastmail.fm> Date: Sat Dec 28 21:00:39 2013 +0100 Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM" fix the individual broken machine instead. Note to backporters: http://patchwork.freedesktop.org/patch/17837/ is the patch you want for 3.13 and older. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54171 Reference: http://mid.gmane.org/DUB115-W7628C7C710EA51AA110CD4A5000@phx.gblSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Patch mangling for 3.14 plus adding the link to the original for 3.13.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit ac4199e0 upstream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=53881 Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
Jani Monoses <jani@ubuntu.com> Signed-off-by:
-
Sabrina Dubroca authored
commit c88507fb upstream. DST_NOCOUNT should only be used if an authorized user adds routes locally. In case of routes which are added on behalf of router advertisments this flag must not get used as it allows an unlimited number of routes getting added remotely. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Acked-by:
-
Dave Kleikamp authored
[ Upstream commit 1535bd8a ] When checking a system call return code for an error, linux_sparc_syscall was sign-extending the lower 32-bit value and comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return codes whose lower 32-bits alone would indicate a failure (such as 4G-1). Use the whole 64-bit value to check for errors. Only the 32-bit path should sign extend the lower 32-bit value. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by:
Bob Picco <bob.picco@oracle.com> Acked-by:
Allen Pais <allen.pais@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
[ Upstream commit 4f6500ff ] In arch/sparc/Kernel/Makefile, we see: obj-$(CONFIG_SPARC64) += jump_label.o However, the Kconfig selects HAVE_ARCH_JUMP_LABEL unconditionally for all SPARC. This in turn leads to the following failure when doing allmodconfig coverage builds: kernel/built-in.o: In function `__jump_label_update': jump_label.c:(.text+0x8560c): undefined reference to `arch_jump_label_transform' kernel/built-in.o: In function `arch_jump_label_transform_static': (.text+0x85cf4): undefined reference to `arch_jump_label_transform' make: *** [vmlinux] Error 1 Change HAVE_ARCH_JUMP_LABEL to be conditional on SPARC64 so that it matches the Makefile. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Dave Kleikamp authored
[ Upstream commit 16932237 ] This reverts commit 145e1c00. This commit broke the behavior of __copy_from_user_inatomic when it is only partially successful. Instead of returning the number of bytes not copied, it now returns 1. This translates to the wrong value being returned by iov_iter_copy_from_user_atomic. xfstests generic/246 and LTP writev01 both fail on btrfs and nfs because of this. Signed-off-by:
-
oftedal authored
[ Upstream commit 557fc587 ] The SIMBA APB Bridges lacks the 'ranges' of-property describing the PCI I/O and memory areas located beneath the bridge. Faking this information has been performed by reading range registers in the APB bridge, and calculating the corresponding areas. In commit 01f94c4a ("Fix sabre pci controllers with new probing scheme.") a bug was introduced into this calculation, causing the PCI memory areas to be calculated incorrectly: The shift size was set to be identical for I/O and MEM ranges, which is incorrect. This patch set the shift size of the MEM range back to the value used before 01f94c4a. Signed-off-by:
Kjetil Oftedal <oftedal@gmail.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit bf39b424 ] Binding might result in a NULL device which is later dereferenced without checking. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 7563487c ] There are three buffer overflows addressed in this patch. 1) In isdnloop_fake_err() we add an 'E' to a 60 character string and then copy it into a 60 character buffer. I have made the destination buffer 64 characters and I'm changed the sprintf() to a snprintf(). 2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60 character buffer so we have 54 characters. The ->eazlist[] is 11 characters long. I have modified the code to return if the source buffer is too long. 3) In isdnloop_command() the cbuf[] array was 60 characters long but the max length of the string then can be up to 79 characters. I made the cbuf array 80 characters long and changed the sprintf() to snprintf(). I also removed the temporary "dial" buffer and changed it to use "p" directly. Unfortunately, we pass the "cbuf" string from isdnloop_command() to isdnloop_writecmd() which truncates anything over 60 characters to make it fit in card->omsg[]. (It can accept values up to 255 characters so long as there is a '\n' character every 60 characters). For now I have just fixed the memory corruption bug and left the other problems in this driver alone. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
[ Upstream commit 77bc6bed ] Return -EINVAL unless all of user-given strings are correctly NUL-terminated. Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Pablo Neira authored
[ Upstream commit 8b7b9324 ] nla_strcmp compares the string length plus one, so it's implicitly including the nul-termination in the comparison. int nla_strcmp(const struct nlattr *nla, const char *str) { int len = strlen(str) + 1; ... d = memcmp(nla_data(nla), str, len); However, if NLA_STRING is used, userspace can send us a string without the nul-termination. This is a problem since the string comparison will not match as the last byte may be not the nul-termination. Fix this by skipping the comparison of the nul-termination if the attribute data is nul-terminated. Suggested by Thomas Graf. Cc: Florian Westphal <fw@strlen.de> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 43a43b60 ] After commit c15b1cca ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1cca ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Paul Durrant authored
[ Upstream commit 0576eddf ] This patch removes a test in start_new_rx_buffer() that checks whether a copy operation is less than MAX_BUFFER_OFFSET in length, since MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less. Signed-off-by:
Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Reported-By:
Sander Eikelenboom <linux@eikelenboom.it> Tested-By:
-
Michael S. Tsirkin authored
[ Upstream commit a39ee449 ] vhost fails to validate negative error code from vhost_get_vq_desc causing a crash: we are using -EFAULT which is 0xfffffff2 as vector size, which exceeds the allocated size. The code in question was introduced in commit 8dd014ad vhost-net: mergeable buffers support CVE-2014-0055 Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit d8316f39 ] When mergeable buffers are disabled, and the incoming packet is too large for the rx buffer, get_rx_bufs returns success. This was intentional in order for make recvmsg truncate the packet and then handle_rx would detect err != sock_len and drop it. Unfortunately we pass the original sock_len to recvmsg - which means we use parts of iov not fully validated. Fix this up by detecting this overrun and doing packet drop immediately. CVE-2014-0077 Signed-off-by:
-
lucien authored
[ Upstream commit e367c2d0 ] In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as transport),the ipsec header need to be added in the first fragment, so the mtu will decrease to reserve space for it, then the second fragment come, the mtu should be turn back, as the commit 0c183379 said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use *mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway equal with the first fragment's. and cannot turn back. when I test through ping6 -c1 -s5000 $ip (mtu=1280): ...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232 ...frag (1232|1216) ...frag (2448|1216) ...frag (3664|1216) ...frag (4880|164) which should be: ...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232 ...frag (1232|1232) ...frag (2464|1232) ...frag (3696|1232) ...frag (4928|116) so delete the min() when change back the mtu. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Fixes: 75a493e6 ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size") Acked-by:
-
Heiner Kallweit authored
[ Upstream commit ecab6701 ] tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore age needs to be added to the condition. Age calculation in ipv6_create_tempaddr is different from the one in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS. This can cause age in ipv6_create_tempaddr to be less than the one in addrconf_verify and therefore unnecessary temporary address to be generated. Use age calculation as in addrconf_modify to avoid this. Signed-off-by:
Heiner Kallweit <heiner.kallweit@web.de> Signed-off-by:
-
Matthew Leach authored
[ Upstream commit dbb490b9 ] When copying in a struct msghdr from the user, if the user has set the msg_namelen parameter to a negative value it gets clamped to a valid size due to a comparison between signed and unsigned values. Ensure the syscall errors when the user passes in a negative value. Signed-off-by:
Matthew Leach <matthew.leach@arm.com> Signed-off-by:
-
Peter Boström authored
[ Upstream commit dd38743b ] With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by:
Peter Boström <peter.bostrom@netrounds.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit de144391 ] Some applications didn't expect recvmsg() on a non blocking socket could return -EINTR. This possibility was added as a side effect of commit b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines"). To hit this bug, you need to be a bit unlucky, as the u->readlock mutex is usually held for very small periods. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 6565b9ee ] MLD queries are supposed to have an IPv6 link-local source address according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch adds a sanity check to ignore such broken MLD queries. Without this check, such malformed MLD queries can result in a denial of service: The queries are ignored by any MLD listener therefore they will not respond with an MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Reviewed-by:
-
Daniel Borkmann authored
[ Upstream commit c485658b ] While working on ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable"), we noticed that there's a skb memory leakage in the error path. Running the same reproducer as in ec0223ec and by unconditionally jumping to the error label (to simulate an error condition) in sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about the unfreed chunk->auth_chunk skb clone: Unreferenced object 0xffff8800b8f3a000 (size 256): comm "softirq", pid 0, jiffies 4294769856 (age 110.757s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X......... backtrace: [<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210 [<ffffffff81566929>] skb_clone+0x49/0xb0 [<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp] [<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp] [<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp] [<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210 [<ffffffff815a64af>] nf_reinject+0xbf/0x180 [<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue] [<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink] [<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0 [<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink] [<ffffffff815a2bd8>] netlink_unicast+0x168/0x250 [<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0 [<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0 [<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380 What happens is that commit bbd0d598 clones the skb containing the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case that an endpoint requires COOKIE-ECHO chunks to be authenticated: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- ------------------ AUTH; COOKIE-ECHO ----------------> <-------------------- COOKIE-ACK --------------------- When we enter sctp_sf_do_5_1D_ce() and before we actually get to the point where we process (and subsequently free) a non-NULL chunk->auth_chunk, we could hit the "goto nomem_init" path from an error condition and thus leave the cloned skb around w/o freeing it. The fix is to centrally free such clones in sctp_chunk_destroy() handler that is invoked from sctp_chunk_free() after all refs have dropped; and also move both kfree_skb(chunk->auth_chunk) there, so that chunk->auth_chunk is either NULL (since sctp_chunkify() allocs new chunks through kmem_cache_zalloc()) or non-NULL with a valid skb pointer. chunk->skb and chunk->auth_chunk are the only skbs in the sctp_chunk structure that need to be handeled. While at it, we should use consume_skb() for both. It is the same as dev_kfree_skb() but more appropriately named as we are not a device but a protocol. Also, this effectively replaces the kfree_skb() from both invocations into consume_skb(). Functions are the same only that kfree_skb() assumes that the frame was being dropped after a failure (e.g. for tools like drop monitor), usage of consume_skb() seems more appropriate in function sctp_chunk_destroy() though. Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <yasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
- 09 Apr, 2014 13 commits
-
-
Ben Hutchings authored
-
Martin Schwidefsky authored
commit 8d7f6690 upstream. The kernel currently crashes with a low-address-protection exception if a user space process executes an instruction that tries to use the linkage stack. Set the base-ASTE origin and the subspace-ASTE origin of the dispatchable-unit-control-table to point to a dummy ASTE. Set up control register 15 to point to an empty linkage stack with no room left. A user space process with a linkage stack instruction will still crash but with a different exception which is correctly translated to a segmentation fault instead of a kernel oops. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jeff Layton authored
commit 5d81de8e upstream. It's possible for userland to pass down an iovec via writev() that has a bogus user pointer in it. If that happens and we're doing an uncached write, then we can end up getting less bytes than we expect from the call to iov_iter_copy_from_user. This is CVE-2014-0069 cifs_iovec_write isn't set up to handle that situation however. It'll blindly keep chugging through the page array and not filling those pages with anything useful. Worse yet, we'll later end up with a negative number in wdata->tailsz, which will confuse the sending routines and cause an oops at the very least. Fix this by having the copy phase of cifs_iovec_write stop copying data in this situation and send the last write as a short one. At the same time, we want to avoid sending a zero-length write to the server, so break out of the loop and set rc to -EFAULT if that happens. This also allows us to handle the case where no address in the iovec is valid. [Note: Marking this for stable on v3.4+ kernels, but kernels as old as v2.6.38 may have a similar problem and may need similar fix] Reviewed-by:
Pavel Shilovsky <piastry@etersoft.ru> Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> [bwh: Backported to 3.2: - Adjust context - s/nr_pages/npages/ - s/wdata->pages/pages/ - In case of an error with no data copied, we must kunmap() page 0, but in neither case should we free anything else] Thanks to Raphael Geissert for an independent backport that showed some bugs in my first version.] Signed-off-by:
-
Marcelo Tosatti authored
commit 26a865f4 upstream. After free_loaded_vmcs executes, the "loaded_vmcs" structure is kfreed, and now vmx->loaded_vmcs points to a kfreed area. Subsequent free_loaded_vmcs then attempts to manipulate vmx->loaded_vmcs. Switch the order to avoid the problem. https://bugzilla.redhat.com/show_bug.cgi?id=1047892Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
commit 989c6b34 upstream. It is possible for __direct_map to be called on invalid root_hpa (-1), two examples: 1) try_async_pf -> can_do_async_pf -> vmx_interrupt_allowed -> nested_vmx_vmexit 2) vmx_handle_exit -> vmx_interrupt_allowed -> nested_vmx_vmexit Then to load_vmcs12_host_state and kvm_mmu_reset_context. Check for this possibility, let fault exception be regenerated. BZ: https://bugzilla.redhat.com/show_bug.cgi?id=924916Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Emil Goode authored
commit d43ff4cd upstream. The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Reported-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Emil Goode authored
commit 8b5b6f54 upstream. ASIX AX88772B started to pack data even more tightly. Packets and the ASIX packet header may now cross URB boundaries. To handle this we have to introduce some state between individual calls to asix_rx_fixup(). Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
-
Eric Dumazet authored
commit a9e0aca4 upstream. asix_rx_fixup() is complex, and does some unnecessary memory copies (at least on x86 where NET_IP_ALIGN is 0) Also, it tends to provide skbs with a big truesize (4096+256 with MTU=1500) to upper stack, so incoming trafic consume a lot of memory and I noticed early packet drops because we hit socket rcvbuf too fast. Switch to a different strategy, using copybreak so that we provide nice skbs to upper stack (including the NET_SKB_PAD to avoid future head reallocations in some paths) With this patch, I no longer see packets drops or tcp collapses on various tcp workload with a AX88772 adapter. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Aurelien Jacobs <aurel@gnuage.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Trond Wuellner <trond@chromium.org> Cc: Grant Grundler <grundler@chromium.org> Cc: Paul Stewart <pstew@chromium.org> Reviewed-by:
Grant Grundler <grundler@chromium.org> Reviewed-by:
-
Ben Hutchings authored
commit f8ce239d upstream. builddeb generates a control file that says the linux-headers package can only be built for the build system primary architecture. This breaks cross-building configurations. We should use $debarch for this instead. Since $debarch is not yet set when generating the control file, set Architecture: any and use control file variables to fill in the description. Fixes: cd8d60a2 ('kbuild: create linux-headers package in deb-pkg') Reported-and-tested-by:
"Niew, Sh." <shniew@gmail.com> Signed-off-by:
Michal Marek <mmarek@suse.cz>
-
Ben Hutchings authored
commit c5e318f6 upstream. These commands will mysteriously fail: $ make ARCH=arm versatile_defconfig [...] $ make ARCH=arm deb-pkg [...] make[1]: *** [deb-pkg] Error 1 make: *** [deb-pkg] Error 2 The Debian architecture selection for these kernel architectures does 'grep FOO=y $KCONFIG_CONFIG && echo bar', and after 'set -e' this aborts the script if grep does not find the given config symbol. Fixes: 10f26fa6 ('build, deb-pkg: select userland architecture based on UTS_MACHINE') Signed-off-by:
-
Anisse Astier authored
commit d2091767 upstream. Signed-off-by:
Anisse Astier <anisse@astier.eu> Reviewed-by:
-
Florian Westphal authored
commit fe6cc55f upstream. [ use zero netdev_feature mask to avoid backport of netif_skb_dev_features function ] Marcelo Ricardo Leitner reported problems when the forwarding link path has a lower mtu than the incoming one if the inbound interface supports GRO. Given: Host <mtu1500> R1 <mtu1200> R2 Host sends tcp stream which is routed via R1 and R2. R1 performs GRO. In this case, the kernel will fail to send ICMP fragmentation needed messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu checks in forward path. Instead, Linux tries to send out packets exceeding the mtu. When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does not fragment the packets when forwarding, and again tries to send out packets exceeding R1-R2 link mtu. This alters the forwarding dstmtu checks to take the individual gso segment lengths into account. For ipv6, we send out pkt too big error for gso if the individual segments are too big. For ipv4, we either send icmp fragmentation needed, or, if the DF bit is not set, perform software segmentation and let the output path create fragments when the packet is leaving the machine. It is not 100% correct as the error message will contain the headers of the GRO skb instead of the original/segmented one, but it seems to work fine in my (limited) tests. Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid sofware segmentation. However it turns out that skb_segment() assumes skb nr_frags is related to mss size so we would BUG there. I don't want to mess with it considering Herbert and Eric disagree on what the correct behavior should be. Hannes Frederic Sowa notes that when we would shrink gso_size skb_segment would then also need to deal with the case where SKB_MAX_FRAGS would be exceeded. This uses sofware segmentation in the forward path when we hit ipv4 non-DF packets and the outgoing link mtu is too small. Its not perfect, but given the lack of bug reports wrt. GRO fwd being broken this is a rare case anyway. Also its not like this could not be improved later once the dust settles. Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Reported-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
commit de960aa9 upstream. [ no skb_gso_seglen helper in 3.4, leave tbf alone ] This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to skbuff core so it may be reused by upcoming ip forwarding path patch. Signed-off-by:
-
