- 05 Feb, 2008 40 commits
-
-
Paul Moore authored
Add a new set of configuration functions to the NetLabel/LSM API so that LSMs can perform their own configuration of the NetLabel subsystem without relying on assistance from userspace. Signed-off-by:
Paul Moore <paul.moore@hp.com> Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Reviewed-by:
James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Serge E. Hallyn authored
Root processes are considered more important when out of memory and killing proceses. The check for CAP_SYS_ADMIN was augmented with a check for uid==0 or euid==0. There are several possible ways to look at this: 1. uid comparisons are unnecessary, trust CAP_SYS_ADMIN alone. However CAP_SYS_RESOURCE is the one that really means "give me extra resources" so allow for that as well. 2. Any privileged code should be protected, but uid is not an indication of privilege. So we should check whether any capabilities are raised. 3. uid==0 makes processes on the host as well as in containers more important, so we should keep the existing checks. 4. uid==0 makes processes only on the host more important, even without any capabilities. So we should be keeping the (uid==0||euid==0) check but only when userns==&init_user_ns. I'm following number 1 here. Signed-off-by:
Serge Hallyn <serue@us.ibm.com> Cc: Andrew Morgan <morgan@kernel.org> Signed-off-by:
-
Serge E. Hallyn authored
The capability bounding set is a set beyond which capabilities cannot grow. Currently cap_bset is per-system. It can be manipulated through sysctl, but only init can add capabilities. Root can remove capabilities. By default it includes all caps except CAP_SETPCAP. This patch makes the bounding set per-process when file capabilities are enabled. It is inherited at fork from parent. Noone can add elements, CAP_SETPCAP is required to remove them. One example use of this is to start a safer container. For instance, until device namespaces or per-container device whitelists are introduced, it is best to take CAP_MKNOD away from a container. The bounding set will not affect pP and pE immediately. It will only affect pP' and pE' after subsequent exec()s. It also does not affect pI, and exec() does not constrain pI'. So to really start a shell with no way of regain CAP_MKNOD, you would do prctl(PR_CAPBSET_DROP, CAP_MKNOD); cap_t cap = cap_get_proc(); cap_value_t caparray[1]; caparray[0] = CAP_MKNOD; cap_set_flag(cap, CAP_INHERITABLE, 1, caparray, CAP_DROP); cap_set_proc(cap); cap_free(cap); The following test program will get and set the bounding set (but not pI). For instance ./bset get (lists capabilities in bset) ./bset drop cap_net_raw (starts shell with new bset) (use capset, setuid binary, or binary with file capabilities to try to increase caps) ************************************************************ cap_bound.c ************************************************************ #include <sys/prctl.h> #include <linux/capability.h> #include <sys/types.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #ifndef PR_CAPBSET_READ #define PR_CAPBSET_READ 23 #endif #ifndef PR_CAPBSET_DROP #define PR_CAPBSET_DROP 24 #endif int usage(char *me) { printf("Usage: %s get\n", me); printf(" %s drop <capability>\n", me); return 1; } #define numcaps 32 char *captable[numcaps] = { "cap_chown", "cap_dac_override", "cap_dac_read_search", "cap_fowner", "cap_fsetid", "cap_kill", "cap_setgid", "cap_setuid", "cap_setpcap", "cap_linux_immutable", "cap_net_bind_service", "cap_net_broadcast", "cap_net_admin", "cap_net_raw", "cap_ipc_lock", "cap_ipc_owner", "cap_sys_module", "cap_sys_rawio", "cap_sys_chroot", "cap_sys_ptrace", "cap_sys_pacct", "cap_sys_admin", "cap_sys_boot", "cap_sys_nice", "cap_sys_resource", "cap_sys_time", "cap_sys_tty_config", "cap_mknod", "cap_lease", "cap_audit_write", "cap_audit_control", "cap_setfcap" }; int getbcap(void) { int comma=0; unsigned long i; int ret; printf("i know of %d capabilities\n", numcaps); printf("capability bounding set:"); for (i=0; i<numcaps; i++) { ret = prctl(PR_CAPBSET_READ, i); if (ret < 0) perror("prctl"); else if (ret==1) printf("%s%s", (comma++) ? ", " : " ", captable[i]); } printf("\n"); return 0; } int capdrop(char *str) { unsigned long i; int found=0; for (i=0; i<numcaps; i++) { if (strcmp(captable[i], str) == 0) { found=1; break; } } if (!found) return 1; if (prctl(PR_CAPBSET_DROP, i)) { perror("prctl"); return 1; } return 0; } int main(int argc, char *argv[]) { if (argc<2) return usage(argv[0]); if (strcmp(argv[1], "get")==0) return getbcap(); if (strcmp(argv[1], "drop")!=0 || argc<3) return usage(argv[0]); if (capdrop(argv[2])) { printf("unknown capability\n"); return 1; } return execl("/bin/bash", "/bin/bash", NULL); } ************************************************************ [serue@us.ibm.com: fix typo] Signed-off-by:Andrew G. Morgan <morgan@kernel.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Casey Schaufler <casey@schaufler-ca.com>a Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Andrew Morgan authored
KaiGai Kohei observed that this line in the linux header is not needed. Signed-off-by:
-
Andrew Morgan authored
The patch supports legacy (32-bit) capability userspace, and where possible translates 32-bit capabilities to/from userspace and the VFS to 64-bit kernel space capabilities. If a capability set cannot be compressed into 32-bits for consumption by user space, the system call fails, with -ERANGE. FWIW libcap-2.00 supports this change (and earlier capability formats) http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ [akpm@linux-foundation.org: coding-syle fixes] [akpm@linux-foundation.org: use get_task_comm()] [ezk@cs.sunysb.edu: build fix] [akpm@linux-foundation.org: do not initialise statics to 0 or NULL] [akpm@linux-foundation.org: unused var] [serue@us.ibm.com: export __cap_ symbols] Signed-off-by:
Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by:
-
Andrew Morton authored
Revert b68680e4 to make way for the next patch: "Add 64-bit capability support to the kernel". We want to keep the vfs_cap_data.data[] structure, using two 'data's for 64-bit caps (and later three for 96-bit caps), whereas b68680e4 had gotten rid of the 'data' struct made its members inline. The 64-bit caps patch keeps the stack abuse fix at get_file_caps(), which was the more important part of that patch. [akpm@linux-foundation.org: coding-style fixes] Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Andrew Morgan <morgan@kernel.org> Signed-off-by:
-
David P. Quigley authored
Originally vfs_getxattr would pull the security xattr variable using the inode getxattr handle and then proceed to clobber it with a subsequent call to the LSM. This patch reorders the two operations such that when the xattr requested is in the security namespace it first attempts to grab the value from the LSM directly. If it fails to obtain the value because there is no module present or the module does not support the operation it will fall back to using the inode getxattr operation. In the event that both are inaccessible it returns EOPNOTSUPP. Signed-off-by:
David P. Quigley <dpquigl@tycho.nsa.gov> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Chris Wright <chrisw@sous-sol.org> Acked-by:
-
David P. Quigley authored
This patch modifies the interface to inode_getsecurity to have the function return a buffer containing the security blob and its length via parameters instead of relying on the calling function to give it an appropriately sized buffer. Security blobs obtained with this function should be freed using the release_secctx LSM hook. This alleviates the problem of the caller having to guess a length and preallocate a buffer for this function allowing it to be used elsewhere for Labeled NFS. The patch also removed the unused err parameter. The conversion is similar to the one performed by Al Viro for the security_getprocattr hook. Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Matt Mackall authored
By putting smaller objects on their own list, we greatly reduce overall external fragmentation and increase repeatability. This reduces total SLOB overhead from > 50% to ~6% on a simple boot test. Signed-off-by:
-
Matt Mackall authored
We weren't merging freed blocks at the beginning of the free list. Fixing this showed a 2.5% efficiency improvement in a userspace test harness. Signed-off-by:
-
Fengguang Wu authored
After making dirty a 100M file, the normal behavior is to start the writeback for all data after 30s delays. But sometimes the following happens instead: - after 30s: ~4M - after 5s: ~4M - after 5s: all remaining 92M Some analyze shows that the internal io dispatch queues goes like this: s_io s_more_io ------------------------- 1) 100M,1K 0 2) 1K 96M 3) 0 96M 1) initial state with a 100M file and a 1K file 2) 4M written, nr_to_write <= 0, so write more 3) 1K written, nr_to_write > 0, no more writes(BUG) nr_to_write > 0 in (3) fools the upper layer to think that data have all been written out. The big dirty file is actually still sitting in s_more_io. We cannot simply splice s_more_io back to s_io as soon as s_io becomes empty, and let the loop in generic_sync_sb_inodes() continue: this may starve newly expired inodes in s_dirty. It is also not an option to draw inodes from both s_more_io and s_dirty, an let the loop go on: this might lead to live locks, and might also starve other superblocks in sync time(well kupdate may still starve some superblocks, that's another bug). We have to return when a full scan of s_io completes. So nr_to_write > 0 does not necessarily mean that "all data are written". This patch introduces a flag writeback_control.more_io to indicate that more io should be done. With it the big dirty file no longer has to wait for the next kupdate invokation 5s later. In sync_sb_inodes() we only set more_io on super_blocks we actually visited. This avoids the interaction between two pdflush deamons. Also in __sync_single_inode() we don't blindly keep requeuing the io if the filesystem cannot progress. Failing to do so may lead to 100% iowait. Tested-by:
Mike Snitzer <snitzer@gmail.com> Signed-off-by:
Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Michael Rubin <mrubin@google.com> Signed-off-by:
-
Sam Ravnborg authored
Fix following warning: WARNING: mm/built-in.o(.text+0x22069): Section mismatch in reference from the function sparse_early_usemap_alloc() to the function .init.text:__alloc_bootmem_node() static sparse_early_usemap_alloc() were used only by sparse_init() and with sparse_init() annotated _init it is safe to annotate sparse_early_usemap_alloc with __init too. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Nick Piggin authored
After running SetPageUptodate, preceeding stores to the page contents to actually bring it uptodate may not be ordered with the store to set the page uptodate. Therefore, another CPU which checks PageUptodate is true, then reads the page contents can get stale data. Fix this by having an smp_wmb before SetPageUptodate, and smp_rmb after PageUptodate. Many places that test PageUptodate, do so with the page locked, and this would be enough to ensure memory ordering in those places if SetPageUptodate were only called while the page is locked. Unfortunately that is not always the case for some filesystems, but it could be an idea for the future. Also bring the handling of anonymous page uptodateness in line with that of file backed page management, by marking anon pages as uptodate when they _are_ uptodate, rather than when our implementation requires that they be marked as such. Doing allows us to get rid of the smp_wmb's in the page copying functions, which were especially added for anonymous pages for an analogous memory ordering problem. Both file and anonymous pages are handled with the same barriers. FAQ: Q. Why not do this in flush_dcache_page? A. Firstly, flush_dcache_page handles only one side (the smb side) of the ordering protocol; we'd still need smp_rmb somewhere. Secondly, hiding away memory barriers in a completely unrelated function is nasty; at least in the PageUptodate macros, they are located together with (half) the operations involved in the ordering. Thirdly, the smp_wmb is only required when first bringing the page uptodate, wheras flush_dcache_page should be called each time it is written to through the kernel mapping. It is logically the wrong place to put it. Q. Why does this increase my text size / reduce my performance / etc. A. Because it is adding the necessary instructions to eliminate the data-race. Q. Can it be improved? A. Yes, eg. if you were to create a rule that all SetPageUptodate operations run under the page lock, we could avoid the smp_rmb places where PageUptodate is queried under the page lock. Requires audit of all filesystems and at least some would need reworking. That's great you're interested, I'm eagerly awaiting your patches. Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Shaohua Li authored
Orphaned page might have fs-private metadata, the page is truncated. As the page hasn't mapping, page migration refuse to migrate the page. It appears the page is only freed in page reclaim and if zone watermark is low, the page is never freed, as a result migration always fail. I thought we could free the metadata so such page can be freed in migration and make migration more reliable. [akpm@linux-foundation.org: go direct to try_to_free_buffers()] Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Acked-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Yasunori Goto authored
Though the lower_zone_protection was changed to lowmem_reserve_ratio, the document has been not changed. The lowmem_reserve_ratio seems quite hard to estimate, but there is no guidance. This patch is to change document for it. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Andrea Arcangeli <andrea@cpushare.com> Signed-off-by:
-
Masatake YAMATO authored
I've written some test programs in ltp project. During writing I met an problem which I cannot solve in user land. So I wrote a patch for linux kernel. Please, include this patch if acceptable. The test program tests the 4th parameter of fadvise64_64: long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice); My test case calls fadvise64_64 with invalid advice value and checks errno is set to EINVAL. About the advice parameter man page says: ... Permissible values for advice include: POSIX_FADV_NORMAL ... POSIX_FADV_SEQUENTIAL ... POSIX_FADV_RANDOM ... POSIX_FADV_NOREUSE ... POSIX_FADV_WILLNEED ... POSIX_FADV_DONTNEED ... ERRORS ... EINVAL An invalid value was specified for advice. However, I got a bug report that the system call invocations in my test case returned 0 unexpectedly. I've inspected the kernel code: asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice) { struct file *file = fget(fd); struct address_space *mapping; struct backing_dev_info *bdi; loff_t endbyte; /* inclusive */ pgoff_t start_index; pgoff_t end_index; unsigned long nrpages; int ret = 0; if (!file) return -EBADF; if (S_ISFIFO(file->f_path.dentry->d_inode->i_mode)) { ret = -ESPIPE; goto out; } mapping = file->f_mapping; if (!mapping || len < 0) { ret = -EINVAL; goto out; } if (mapping->a_ops->get_xip_page) /* no bad return value, but ignore advice */ goto out; ... out: fput(file); return ret; } I found the advice parameter is just ignored in the case mapping->a_ops->get_xip_page is given. This behavior is different from what is written on the man page. Is this o.k.? get_xip_page is given if CONFIG_EXT2_FS_XIP is true. Anyway I cannot find the easy way to detect get_xip_page field is given or CONFIG_EXT2_FS_XIP is true from the user space. I propose the following patch which checks the advice parameter even if get_xip_page is given. Signed-off-by:Masatake YAMATO <yamato@redhat.com> Acked-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Larry Woodman authored
The show_mem() output does not include the total number of pagecache pages. This would be helpful when analyzing the debug information in the /var/log/messages file after OOM kills occur. This patch includes the total pagecache pages in that output. Signed-off-by:
Larry Woodman <lwoodman@redhat.com> Signed-off-by:
-
Bjorn Steinbrink authored
In 46d2277c ("Clean up and make try_to_free_buffers() not race with dirty pages"), try_to_free_buffers was changed to bail out if the page was dirty. That in turn caused truncate_complete_page to leak massive amounts of memory, because the dirty bit was only cleared after the call to try_to_free_buffers. So the call to cancel_dirty_page was moved up to have the dirty bit cleared early in 3e67c098 ("truncate: clear page dirtiness before running try_to_free_buffers()"). The problem with that fix is, that the page can be redirtied after cancel_dirty_page was called, eg. like this: truncate_complete_page() cancel_dirty_page() // PG_dirty cleared, decr. dirty pages do_invalidatepage() ext3_invalidatepage() journal_invalidatepage() journal_unmap_buffer() __dispose_buffer() __journal_unfile_buffer() __journal_temp_unlink_buffer() mark_buffer_dirty(); // PG_dirty set, incr. dirty pages And then we end up with dirty pages being wrongly accounted. As a result, in ecdfc978 ("Resurrect 'try_to_free_buffers()' VM hackery") the changes to try_to_free_buffers were reverted, so the original reason for the massive memory leak is gone, and we can also revert the move of the call to cancel_dirty_page from truncate_complete_page and get the accounting right again. I'm not sure if it matters, but opposed to the final check in __remove_from_page_cache, this one also cares about the task io accounting, so maybe we want to use this instead, although it's not quite the clean fix either. Signed-off-by:
Björn Steinbrink <B.Steinbrink@gmx.de> Tested-by:
Krzysztof Piotr Oledzki <ole@ans.pl> Cc: Jan Kara <jack@ucw.cz> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Osterried <osterried@jesse.de> Signed-off-by:
-
Qi Yong authored
The current PageTail semantic is that a PageTail page is first a PageCompound page. So remove the redundant PageCompound test in set_page_refcounted(). Signed-off-by:
Qi Yong <qiyong@fc-cn.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Harvey Harrison authored
fastcall is always defined to be empty, remove it [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Qi Yong authored
Since I_SYNC was split out from I_LOCK, the concern in commit 4b89eed9 ("Write back inode data pages even when the inode itself is locked") is not longer valid. We should revert to the original behavior: in __writeback_single_inode(), when we find an I_SYNC-ed inode and we're not doing a data-integrity sync, skip writing entirely. Otherwise, we are double calling do_writepages() Signed-off-by:
-
Hugh Dickins authored
try_to_unmap always fails on a page found in a VM_LOCKED vma (unless migrating), and recycles it back to the active list. But if it's an anonymous page, we've already allocated swap to it: just wasting swap. Spot locked pages in page_referenced_one and treat them as referenced. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Tested-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ethan Solomita <solo@google.com> Signed-off-by:
-
Christoph Lameter authored
Remove the prefetch logic in order to avoid touching impossible per cpu areas. Signed-off-by:
-
Andrea Arcangeli authored
This patch fixes a sles9 system hang in start_this_handle from a customer with some heavy workload where all tasks are waiting on kjournald to commit the transaction, but kjournald waits on t_updates to go down to zero (it never does). This was reported as a lowmem shortage deadlock but when checking the debug data I noticed the VM wasn't under pressure at all (well it was really under vm pressure, because lots of tasks hanged in the VM prune_dcache methods trying to flush dirty inodes, but no task was hanging in GFP_NOFS mode, the holder of the journal handle should have if this was a vm issue in the first place). No task was apparently holding the leftover handle in the committing transaction, so I deduced t_updates was stuck to 1 because a journal_stop was never run by some path (this turned out to be correct). With a debug patch adding proper reverse links and stack trace logging in ext3 deployed in production, I found journal_stop is never run because mark_inode_dirty_sync is called inside release_task called by do_exit. (that was quite fun because I would have never thought about this subtleness, I thought a regular path in ext3 had a bug and it forgot to call journal_stop) do_exit->release_task->mark_inode_dirty_sync->schedule() (will never come back to run journal_stop) The reason is that shrink_dcache_parent is racy by design (feature not a bug) and it can do blocking I/O in some case, but the point is that calling shrink_dcache_parent at the last stage of do_exit isn't safe for self-reaping tasks. I guess the memory pressure of the unbalanced highmem system allowed to trigger this more easily. Now mainline doesn't have this line in iput (like sles9 has): if (inode->i_state & I_DIRTY_DELAYED) mark_inode_dirty_sync(inode); so it will probably not crash with ext3, but for example ext2 implements an I/O-blocking ext2_put_inode that will lead to similar screwups with ext2_free_blocks never coming back and it's definitely wrong to call blocking-IO paths inside do_exit. So this should fix a subtle bug in mainline too (not verified in practice though). The equivalent fix for ext3 is also not verified yet to fix the problem in sles9 but I don't have doubt it will (it usually takes days to crash, so it'll take weeks to be sure). An alternate fix would be to offload that work to a kernel thread, but I don't think a reschedule for this is worth it, the vm should be able to collect those entries for the synchronous release_task. Signed-off-by:Andrea Arcangeli <andrea@suse.de> Cc: Jan Kara <jack@ucw.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Bron Gondwana authored
Add vm.highmem_is_dirtyable toggle A 32 bit machine with HIGHMEM64 enabled running DCC has an MMAPed file of approximately 2Gb size which contains a hash format that is written randomly by the dbclean process. On 2.6.16 this process took a few minutes. With lowmem only accounting of dirty ratios, this takes about 12 hours of 100% disk IO, all random writes. Include a toggle in /proc/sys/vm/highmem_is_dirtyable which can be set to 1 to add the highmem back to the total available memory count. [akpm@linux-foundation.org: Fix the CONFIG_DETECT_SOFTLOCKUP=y build] Signed-off-by:
Bron Gondwana <brong@fastmail.fm> Cc: Ethan Solomita <solo@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: WU Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by:
-
Christoph Lameter authored
We have repeatedly discussed if the cold pages still have a point. There is one way to join the two lists: Use a single list and put the cold pages at the end and the hot pages at the beginning. That way a single list can serve for both types of allocations. The discussion of the RFC for this and Mel's measurements indicate that there may not be too much of a point left to having separate lists for hot and cold pages (see http://marc.info/?t=119492914200001&r=1&w=2). Signed-off-by:
-
Robert Bragg authored
When running with a 16M IOREMAP_MAX_ORDER (on armv7) we found that the vmlist search routine in __get_vm_area_node can mistakenly allow a driver to ioremap a range larger than vmalloc space. If at the time of the ioremap all existing vmlist areas sit below the determined alignment then the search routine continues past all entries and exits the for loop - straight into the found: label - without ever testing for integer wrapping or that the requested size fits. We were seeing a driver successfully ioremap 128M of flash even though there was only 120M of vmalloc space. From that point the system was left with the remainder of the first 16M of space to vmalloc/ioremap within. Signed-off-by:
Robert Bragg <robert@sixbynine.org> Acked-by:
-
Christoph Lameter authored
1. Add comments explaining how the function can be called. 2. Collect global diffs in a local array and only spill them once into the global counters when the zone scan is finished. This means that we only touch each global counter once instead of each time we fold cpu counters into zone counters. Signed-off-by:
-
Martin Schwidefsky authored
In order to change the layout of the page tables after an mmap has crossed the adress space limit of the current page table layout a architecture hook in get_unmapped_area is needed. The arguments are the address of the new mapping and the length of it. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
(with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
-
Christoph Lameter authored
- Add comments explaing how drain_pages() works. - Eliminate useless functions - Rename drain_all_local_pages to drain_all_pages(). It does drain all pages not only those of the local processor. - Eliminate useless interrupt off / on sequences. drain_pages() disables interrupts on its own. The execution thread is pinned to processor by the caller. So there is no need to disable interrupts. - Put drain_all_pages() declaration in gfp.h and remove the declarations from suspend.h and from mm/memory_hotplug.c - Make software suspend call drain_all_pages(). The draining of processor local pages is may not the right approach if software suspend wants to support SMP. If they call drain_all_pages then we can make drain_pages() static. [akpm@linux-foundation.org: fix build] Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Daniel Walker <dwalker@mvista.com> Signed-off-by:
-
Nick Piggin authored
Most pagecache (and some other) radix tree insertions have the great opportunity to preallocate a few nodes with relaxed gfp flags. But the preallocation is squandered when it comes time to allocate a node, we default to first attempting a GFP_ATOMIC allocation -- that doesn't normally fail, but it can eat into atomic memory reserves that we don't need to be using. Another upshot of this is that it removes the sometimes highly contended zone->lock from underneath tree_lock. Pagecache insertions are always performed with a radix tree preload, and after this change, such a situation will never fall back to kmem_cache_alloc within radix_tree_node_alloc. David Miller reports seeing this allocation fail on a highly threaded sparc64 system: [527319.459981] dd: page allocation failure. order:0, mode:0x20 [527319.460403] Call Trace: [527319.460568] [00000000004b71e0] __slab_alloc+0x1b0/0x6a8 [527319.460636] [00000000004b7bbc] kmem_cache_alloc+0x4c/0xa8 [527319.460698] [000000000055309c] radix_tree_node_alloc+0x20/0x90 [527319.460763] [0000000000553238] radix_tree_insert+0x12c/0x260 [527319.460830] [0000000000495cd0] add_to_page_cache+0x38/0xb0 [527319.460893] [00000000004e4794] mpage_readpages+0x6c/0x134 [527319.460955] [000000000049c7fc] __do_page_cache_readahead+0x170/0x280 [527319.461028] [000000000049cc88] ondemand_readahead+0x208/0x214 [527319.461094] [0000000000496018] do_generic_mapping_read+0xe8/0x428 [527319.461152] [0000000000497948] generic_file_aio_read+0x108/0x170 [527319.461217] [00000000004badac] do_sync_read+0x88/0xd0 [527319.461292] [00000000004bb5cc] vfs_read+0x78/0x10c [527319.461361] [00000000004bb920] sys_read+0x34/0x60 [527319.461424] [0000000000406294] linux_sparc_syscall32+0x3c/0x40 The calltrace is significant: __do_page_cache_readahead allocates a number of pages with GFP_KERNEL, and hence it should have reclaimed sufficient memory to satisfy GFP_ATOMIC allocations. However after the list of pages goes to mpage_readpages, there can be significant intervals (including disk IO) before all the pages are inserted into the radix-tree. So the reserves can easily be depleted at that point. The patch is confirmed to fix the problem. Signed-off-by:
-
Adrian Bunk authored
__vmalloc_area_node() can become static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Balbir Singh authored
This code in mm/tiny-shmem.c is under #if 0 - remove it. Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by:
-
Adrian Bunk authored
task_dirty_limit() can become static. Signed-off-by:
-
Matt Mackall authored
Make /proc/ page monitoring configurable This puts the following files under an embedded config option: /proc/pid/clear_refs /proc/pid/smaps /proc/pid/pagemap /proc/kpagecount /proc/kpageflags [akpm@linux-foundation.org: Kconfig fix] Signed-off-by:
-
Matt Mackall authored
This makes a subset of physical page flags available to userspace. Together with /proc/pid/kpagemap, this allows tracking of a wide variety of VM behaviors. Exported flags are decoupled from the kernel's internal flags. This allows us to reorder flag bits, and synthesize any bits that get redefined in terms of other bits. [akpm@linux-foundation.org: remove unneeded access_ok()] [akpm@linux-foundation.org: s/0/NULL/] Signed-off-by:
-
Matt Mackall authored
This makes physical page map counts available to userspace. Together with /proc/pid/pagemap and /proc/pid/clear_refs, this can be used to monitor memory usage on a per-page basis. [akpm@linux-foundation.org: remove unneeded access_ok()] [bunk@stusta.de: make struct proc_kpagemap static] Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
