- 13 Aug, 2014 40 commits
-
-
naota@elisp.net authored
When you specify "--branch-stack"("-b" for short) or "--no-branch-stack", "branch_mode" variable is set to 1 or 0 respectively. However, the code is just checking if the variable is -1 or not, ignoring "branch_mode == 1" case. Thus "perf report -b" dose not show its result with the branch sorted mode. This patch fix the problem. Signed-off-by:Naohiro Aota <naota@elisp.net> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/87y4v1fylq.fsf@elisp.netSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
The currently when perf TUI report shows callchain, the first level chains have bogus '+' sign even though only the last one has children. Since they are on a single line of the chain, toggling intermediate entries has no effect. Fix it to show '+' sign at the last entry only. Note that non-first level callchain entries don't have this problem. Before: --------------------------------------------------------------------------- Children Self Command Shared Object Symbols - 40.70% 0.00% swapper [kernel.kallsyms] [k] cpuidle_wrap_enter + cpuidle_wrap_enter + cpuidle_enter_tk + cpuidle_idle_call + cpu_idle After: --------------------------------------------------------------------------- Children Self Command Shared Object Symbols - 40.70% 0.00% swapper [kernel.kallsyms] [k] cpuidle_wrap_enter cpuidle_wrap_enter cpuidle_enter_tk cpuidle_idle_call + cpu_idle Signed-off-by:Ingo Molnar <mingo@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1407909761-10822-1-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by:Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1407825645-24586-12-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Acked-by:
-
Namhyung Kim authored
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by:
-
Namhyung Kim authored
When uname() failed, it should free vmlinux_path. Acked-by:
-
Namhyung Kim authored
Some paths in perf script don't call perf_session__delete() after creating a new session. Signed-off-by:
-
Adrian Hunter authored
When doing a system-wide trace with Intel PT, the jump label set up as a result of probing CLOEXEC gets reset while the trace is running. That causes an Intel PT decoding error because the object code (obtained from /proc/kcore) does not match the running code at that point. While we can't expect there never to be jump label changes, we can avoid cases that the perf tool itself creates. The problem is avoided by first trying a cpu-wide event (pid = -1) for probing the PERF_FLAG_FD_CLOEXEC flag and falling back to an event for the current process (pid = 0). Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
-
Adrian Hunter authored
Fall back to probing with the current pid if cpu-wide probing fails. This primarily affects the setting of comm_exec flag when the user is un-privileged and /proc/sys/kernel/perf_event_paranoid > 0. The change to comm_exec can be observed by using -vv with perf record and a kernel that supports comm_exec. Signed-off-by:
-
Adrian Hunter authored
When probing the kernel API the kernel should be excluded otherwise the probe will fail for users with insufficient privilege to profile the kernel. Signed-off-by:
-
Adrian Hunter authored
With /proc/sys/kernel/perf_event_paranoid set to 2, the probe of PERF_FLAG_FD_CLOEXEC would fail. Fix by excluding kernel profiling from the probe event. Signed-off-by:
-
Alex Snast authored
~/devel/kernel/tools/perf(branch:master*) » sudo ./perf trace ~/mremap_test 0.543 ( 0.003 ms): mprotect(start: 0x600000, len: 4096, prot: READ ) = 0 0.550 ( 0.003 ms): mprotect(start: 0x7f441260d000, len: 4096, prot: READ) = 0 0.561 ( 0.010 ms): munmap(addr: 0x7f44125e2000, len: 165572 ) = 0 0.595 ( 0.012 ms): mmap(len: 12288, prot: READ|WRITE, flags: SHARED|ANONYMOUS|LOCKED, fd: -1) = 0x12608000 0.603 ( 0.006 ms): mremap(addr: 0x7f4412608000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da295000) = 0xda295000 0.608 ( 0.003 ms): mremap(addr: 0x7f441260a000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da297000) = 0xda297000 0.612 ( 0.003 ms): mremap(addr: 0x7f4412609000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da296000) = 0xda296000 0.619 ( 0.000 ms): exit_group( Signed-off-by:Alex Snast <asnast@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1407944560-26924-1-git-send-email-asnast@gmail.comSigned-off-by:
-
Masami Hiramatsu authored
Current perf probe --del doesn't work if only CONFIG_UPROBE_EVENTS=y because it aborts when it fails to open kprobe_events file before checking uprobe_events file. This fixes --del option to delete dynamic events if it can open either kprobe_events or uprobe_events. Only if it failed to open both of them, it shows an error message and aborts. Without this patch, if we run perf probe -d on the kernel configured with CONFIG_KPROBE_EVENTS=n and CONFIG_UPROBE_EVENTS=y, # perf probe -d \* kprobe_events file does not exist - please rebuild kernel with CONFIG_KPROBE_EVENTS. Error: Failed to delete events. With this patch, # perf probe -d \* Removed event: probe_perf:alloc_event Changes in v2: - Use strerror_r instead of strerror. Signed-off-by:Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Naohiro Aota <naota@elisp.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140813161250.26440.24028.stgit@kbuild-fedora.novalocalSigned-off-by:
-
Masami Hiramatsu authored
Current perf probe --list doesn't work if only CONFIG_UPROBE_EVENTS=y because it aborts when it fails to open kprobe_events file before checking uprobe_events file. This fixes --list option to show dynamic events if it can open either kprobe_events or uprobe_events. Only if it failed to open both of them, it shows an error message and aborts. Without this patch, if we run perf probe -l on the kernel configured with CONFIG_KPROBE_EVENTS=n and CONFIG_UPROBE_EVENTS=y, # perf probe -l /sys/kernel/debug/tracing/kprobe_events file does not exist - please rebuild ker Error: Failed to show event list. With this patch, # perf probe -l probe_perf:alloc_event (on alloc_event@lib/traceevent/event-parse.c in /home/fedora/ksrc/linux-3/tools/perf/perf) Changes in v2: - Use strerror_r instead of strerror. Reported-by: -
Jiri Olsa authored
Currently the initial ~(ICANON | ECHO) terminal mode is not set, so we dont get stdin data until we press ENTER. Fixing this by early setting of the ~(ICANON | ECHO) mode and leaving this mode for whole life of the command, because canonical mode is not needed. Signed-off-by:
-
Jiri Olsa authored
The TUI code setup standard signals handling, while the stdio display code does not. This leads to premature termination of display thread when signal is received and leaving terminal in wrong state. Also adding terminal cleanup at the end of display thread, to ensure we get the old terminal state in case of signal interruption. Signed-off-by:
-
Jiri Olsa authored
Adding set_term_quiet_input helper to set the terminal quiet, out from 'perf top', used in following patches in 'perf kvm'. Signed-off-by:
-
Jiri Olsa authored
We create the display thread, but never join it. It gives the display thread a chance to quit and cleanup properly. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-oh4lrofvrqqv1eyslh7m4rq4@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The 'top' tool initially supported only kernel symbols, when making it support userspace symbols we forgot to make the symbol filter first check that the DSO is the kernel one. Fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> c: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-54haztkeigmbump5sexxnzhv@git.kernel.orgSigned-off-by:
-
Peter Zijlstra authored
Keeping track of all the various CPU names is hard enough; adding extra silly names for no reason is just not helping. If we know the base arch name (IvyBridge) then we can do the client/server parts with the well known {,EP,EX} postfixes, no need to remember endless amounts of unrelated and pointless names for this. Signed-off-by:Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-8559jke61dsyr7d0i74iutli@git.kernel.org Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
-
Stephane Eranian authored
This patch exposes two basic events for Ivytown IMC uncore PMU: - cas_count_read: number of full-cache line reads to memory controller - cas_count_write: number of full-cache line writes to memory controller Those events use the same encoding as for SNB-EP, so reuse the same event table. See specification in: http://www.intel.com/content/dam/www/public/us/en/documents/manuals/xeon-e5-2600-v2-uncore-manual.pdf By aggregating all the read and write events from all the memory controllers of each processor socket, one can determine the total memory bandwidth utilization. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
This patch makes the code more readable. It also renames precise_store_data_hsw() to precise_datala_hsw() because the function is called for both loads and stores on HSW. The patch also gets rid of the hardcoded store events codes in that same function. Signed-off-by:
-
Stephane Eranian authored
This patch fixes issues introuduce by Andi's previous patch 'Revamp PEBS' series. This patch fixes the following: - precise_store_data_hsw() encode the mem op type whenever we can - precise_store_data_hsw set the default data source correctly - 0 is not a valid init value for data source. Define PERF_MEM_NA as the default value This bug was actually introduced by commit 722e76e6 Author: Stephane Eranian <eranian@google.com> Date: Thu May 15 17:56:44 2014 +0200 fix Haswell precise store data source encoding Signed-off-by: -
Andi Kleen authored
Haswell supports reporting the data address for a range of PEBS events, including: UOPS_RETIRED.ALL MEM_UOPS_RETIRED.STLB_MISS_LOADS MEM_UOPS_RETIRED.STLB_MISS_STORES MEM_UOPS_RETIRED.LOCK_LOADS MEM_UOPS_RETIRED.SPLIT_LOADS MEM_UOPS_RETIRED.SPLIT_STORES MEM_UOPS_RETIRED.ALL_LOADS MEM_UOPS_RETIRED.ALL_STORES MEM_LOAD_UOPS_RETIRED.L1_HIT MEM_LOAD_UOPS_RETIRED.L2_HIT MEM_LOAD_UOPS_RETIRED.L3_HIT MEM_LOAD_UOPS_RETIRED.L1_MISS MEM_LOAD_UOPS_RETIRED.L2_MISS MEM_LOAD_UOPS_RETIRED.L3_MISS MEM_LOAD_UOPS_RETIRED.HIT_LFB MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_MISS MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_NONE MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM This facility was already enabled earlier with the original Haswell perf changes. However these addresses were always reports as stores by perf, which is wrong, as they could be loads too. The hardware does not distinguish loads and stores for these instructions, so there's no (cheap) way for the profiler to find out. Change the type to PERF_MEM_OP_NA instead. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Reviewed-by:
-
Andi Kleen authored
The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by:
-
Andi Kleen authored
This fixes a side effect of Kan's earlier patch to probe the LBRs at boot time. Normally when the LBRs are disabled cycles:pp is disabled too. So for example cycles:pp doesn't work. However this is not needed with PEBSv2 and later (Haswell) because it does not need LBRs to correct the IP-off-by-one. So add an extra check for PEBSv2 that also allows :pp Signed-off-by:
-
Sebastian Andrzej Siewior authored
One should first enqueue to the waitqueue and then check for the condition. If the condition gets true after mutex_unlock() but before poll_wait() then we lose it and would have wait for another wakeup. This has been like this since v2.6.31-rc1 commit c7138f37 ("perf_counter: fix perf_poll()"). Before that it was slightly worse. I guess we get enough wakeups so if we miss here one it doesn't really matter. It is still a bad example. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Andi Kleen authored
HSW-EP has a larger offcore mask than the client Haswell CPUs. It is the same mask as on Sandy/IvyBridge-EP. All of Haswell was using the client mask, so some bits were missing. On the client parts some bits were also missing compared to Sandy/IvyBridge, in particular the bits to match on a L4 cache hit. The Haswell core in both client and server incarnations accepts the same bits (but some are nops), so we can use the same mask. So use the snbep extended mask, which is a superset of the client and the server, for all of Haswell. This allows specifying a number of extra offcore events, like for example for HSW-EP. % perf stat -e cpu/event=0xb7,umask=0x1,offcore_rsp=0x3fffc00100,name=offcore_response_pf_l3_rfo_l3_miss_any_response/ true which were <not supported> before. Signed-off-by:
-
Fengguang Wu authored
arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c:961:2-3: Unneeded semicolon arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c:1100:2-3: Unneeded semicolon arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c:1138:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Yan, Zheng authored
Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
-
Yan, Zheng authored
Signed-off-by:
-
