- 18 Apr, 2008 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (43 commits) firewire: cleanups firewire: fix synchronization of gap counts firewire: wait until PHY configuration packet was transmitted (fix bus reset loop) firewire: remove unused struct member firewire: use bitwise and to get reg in handle_registers firewire: replace more hex values with defined csr constants firewire: reread config ROM when device reset the bus firewire: replace static ROM cache by allocated cache firewire: fw-ohci: work around generation bug in TI controllers (fix AV/C and more) firewire: fw-ohci: extend logging of bus generations and node ID firewire: fw-ohci: conditionally log busReset interrupts firewire: fw-ohci: don't append to AT context when it's not active firewire: fw-ohci: log regAccessFail events firewire: fw-ohci: make sure HCControl register LPS bit is set firewire: fw-ohci: missing PPC PMac feature calls in failure path firewire: fw-ohci: untangle a mixed unsigned/signed expression firewire: debug interrupt events firewire: fw-ohci: catch self_id_count == 0 firewire: fw-ohci: add self ID error check firewire: fw-ohci: refactor probe, remove, suspend, resume ...
-
James Bottomley authored
The kernel now panics reliably on boot if you have a SATAPI device connected. The problem was introduced by the libata merge trying to pull out all the SFF code into a separate module. Unfortunately, if you're a satapi device you usually need to call atapi_request_sense, which has a bare invocation of a SFF callback which is NULL on non-SFF HBAs. Fix this by making the call conditional. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits) ocfs2/net: Add debug interface to o2net ocfs2: Only build ocfs2/dlm with the o2cb stack module ocfs2/cluster: Get rid of arguments to the timeout routines ocfs2: Put tree in MAINTAINERS ocfs2: Use BUG_ON ocfs2: Convert ocfs2 over to unlocked_ioctl ocfs2: Improve rename locking fs/ocfs2/aops.c: test for IS_ERR rather than 0 ocfs2: Add inode stealing for ocfs2_reserve_new_inode ocfs2: Add ac_alloc_slot in ocfs2_alloc_context ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits ocfs2: Enable cross extent block merge. ocfs2: Add support for cross extent block ocfs2: Move /sys/o2cb to /sys/fs/o2cb sysfs: Allow removal of symlinks in the sysfs root ocfs2: Reconnect after idle time out. ocfs2/dlm: Cleanup lockres print ocfs2/dlm: Fix lockname in lockres print function ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c ocfs2/dlm: Dumps the purgelist into a debugfs file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits) [GFS2] fix assertion in log_refund() [GFS2] fix GFP_KERNEL misuses [GFS2] test for IS_ERR rather than 0 [GFS2] Invalidate cache at correct point [GFS2] fs/gfs2/recovery.c: suppress warnings [GFS2] Faster gfs2_bitfit algorithm [GFS2] Streamline quota lock/check for no-quota case [GFS2] Remove drop of module ref where not needed [GFS2] gfs2_adjust_quota has broken unstuffing code [GFS2] possible null pointer dereference fixup [GFS2] Need to ensure that sector_t is 64bits for GFS2 [GFS2] re-support special inode [GFS2] remove gfs2_dev_iops [GFS2] fix file_system_type leak on gfs2meta mount [GFS2] Allow bmap to allocate extents [GFS2] Fix a page lock / glock deadlock [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops [GFS2] gfs2/ops_file.c should #include "ops_inode.h" [GFS2] be*_add_cpu conversion [GFS2] Fix bug where we called drop_bh incorrectly ...
-
Harvey Harrison authored
TF_MASK is no longer defined, use X86_EFLAGS_TF. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] kdump: Add crash_save_vmcoreinfo for INIT [IA64] Fix NUMA configuration issue [IA64] Itanium Spec updates [IA64] Untangle sync_icache_dcache() page size determination [IA64] arch/ia64/kernel/: use time_* macros [IA64] remove redundant display of free swap space in show_mem() [IA64] make IOMMU respect the segment boundary limits [IA64] kprobes: kprobe-booster for ia64 [IA64] fix getpid and set_tid_address fast system calls for pid namespaces [IA64] Replace explicit jiffies tests with time_* macros. [IA64] use goto to jump out do/while_each_thread [IA64] Fix unlock ordering in smp_callin [IA64] pgd_offset() constfication. [IA64] kdump: crash.c coding style fix [IA64] kdump: add kdump_on_fatal_mca [IA64] Minimize per_cpu reservations. [IA64] Correct pernodesize calculation. [IA64] Kernel parameter for max number of concurrent global TLB purges [IA64] Multiple outstanding ptc.g instruction support [IA64] Implement smp_call_function_mask for ia64 ...
-
Sunil Mushran authored
This patch exposes o2net information via debugfs. The information includes the list of sockets (sock_containers) as well as the list of outstanding messages (send_tracking). Useful for o2dlm debugging. (This patch is derived from an earlier one written by Zach Brown that exposed the same information via /proc.) [Mark: checkpatch fixes] Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Reviewed-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Mark Fasheh authored
fs/ocfs2/dlm/ocfs2_dlm.ko and fs/ocfs2/dlm/ocfs2_dlmfs.ko get built if CONFIG_FS_OCFS2 is specified. This isn't quite how it should happen any more - the "o2cb" dlm modules should only be built if CONFIG_FS_OCFS2_O2CB is set, so update the dlm Makefile accordingly. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com>
-
Jeff Mahoney authored
We keep seeing bug reports related to NULL pointer derefs in o2net_set_nn_state(). When I originally wrote up the configurable timeout patch, I had tried to plan for multiple clusters. This was silly. The timeout routines all use o2nm_single_cluster so there's no point in passing an argument at all. This patch removes the arguments and kills those bugs dead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Joel Becker authored
The ocfs2 MAINTAINERS entry should have the git tree URL. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Julia Lawall authored
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no side-effects to allow a definition of BUG_ON that drops the code completely. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ disable unlikely @ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (unlikely(E)) { BUG(); } + BUG_ON(E); ) @@ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Andi Kleen authored
As far as I can see there is nothing in ocfs2_ioctl that requires the BKL, so use unlocked_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Jan Kara authored
ocfs2_rename() was being too aggressive with the rename lock - we only need it for certain forms of directory rename. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Julia Lawall authored
The function ocfs2_start_trans always returns either a valid pointer or a value made with ERR_PTR, so its result should be tested with IS_ERR, not with a test for 0. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Tao Ma authored
Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Tao Ma authored
In inode stealing, we no longer restrict the allocation to happen in the local node. So it is neccessary for us to add a new member in ocfs2_alloc_context to indicate which slot we are using for allocation. We also modify the process of local alloc so that this member can be used there also. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Tao Ma authored
In some cases(Inode stealing from other nodes), we may not want ocfs2_reserve_suballoc_bits to allocate new groups from the global_bitmap since it may already be full. So add a new parameter for this. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Tao Ma authored
In ocfs2_figure_merge_contig_type, we judge whether there exists a cross extent block merge and enable it by setting CONTIG_LEFT and CONTIG_RIGHT accordingly. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Tao Ma authored
In ocfs2_merge_rec_left, when we find the merge extent is "CONTIG_RIGHT" with the first extent record of the next extent block, we will merge it to the next extent block and change all the related extent blocks accordingly. In ocfs2_merge_rec_right, when we find the merge extent is "CONTIG_LEFT" with the last extent record of the previous extent block, we will merge it to the prevoius extent block and change all the related extent blocks accordingly. As for CONTIG_LEFTRIGHT, we will handle CONTIG_RIGHT first so that when the index is zero, the merge process will be more efficient and easier. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Mark Fasheh authored
/sys/fs is where we really want file system specific sysfs objects. Ocfs2-tools has been updated to look in /sys/fs/o2cb. We can maintain backwards compatibility with old ocfs2-tools by using a sysfs symlink. After some time (2 years), the symlink can be safely removed. This patch also adds documentation to make it easier for people to figure out what /sys/fs/o2cb is used for. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Mark Fasheh authored
Allow callers of sysfs_remove_link() to pass a NULL kobj, in which case sysfs_root will be used as the parent directory. This allows us to tear down top level symlinks created via sysfs_create_link(), which already has similar handling of a NULL parent object. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tao Ma authored
Currently, o2net connects to a node on hb_up and disconnects on hb_down and net timeout. It disconnects on net timeout is ok, but it should attempt to reconnect back. This is because sometimes nodes get overloaded enough that the network connection breaks but the disk hb does not. And if we get into that situation, we either fence (unnecessarily) or wait for its disk hb to die (and sometimes hang in the process). So in this updated scheme, when the network disconnects, we keep attempting to reconnect till we succeed or we get a disk hb down event. If the other node is really dead, then we will eventually get a node down event. If not, we should be able to connect again and continue. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
A previous patch added KERN_NOTICE to printks printing the lockres that cluttered the output. This patch removes the log level. For people concerned with syslog clutter, please note we now use this facility to print lockres only during an error. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
__dlm_print_one_lock_resource was printing lockname incorrectly. Also, we now use printk directly instead of mlog as the latter prints the line context which is not useful for this print. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch helps in consolidating debugging related functions in dlmdebug.c. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch dumps all the lockres' on the purgelist it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch dumps all mles it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch moves some mle related definitions from dlmmaster.c to dlmcommon.h. Future patches need these definitions to dump mle debugging information. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.beckeroracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch dumps all the lockres' alongwith all the locks into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch dumps the dlm state (dlm_ctxt) into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch creates the debugfs directories that will hold the files to be used to dump the dlm state. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch links all the lockres' to a tracking list in dlm_ctxt. We will use this in an upcoming patch that will walk the entire list and to dump the lockres states to a debugfs file. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch makes the o2dlm allocate memory for lockres, lockname and lock structures from slabcaches rather than kmalloc. This allows us to not only make these allocs more efficient but also allows us to track the memory being consumed by these structures. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Sunil Mushran authored
This patch renames dlm_mle_slabcache to prevent namespace clashes with fs/dlm. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Joel Becker authored
Add ABI documentation for these files: /sys/fs/ocfs2/max_locking_protocol /sys/fs/ocfs2/loaded_cluster_plugins /sys/fs/ocfs2/active_cluster_plugin /sys/fs/ocfs2/cluster_stack Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Joel Becker authored
ocfs2 now supports plug-ins for the classic O2CB stack as well as userspace cluster stacks in conjunction with fs/dlm. This allows zero, one, or both of the plug-ins to be selected in Kconfig. For local mounts (non-clustered), neither plug-in is needed. Both plugins can be loaded at one time, the runtime will select the one needed for the cluster systme in use. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Joel Becker authored
Add ocfs2_stack_user.ko to the Makefile so that it builds. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Joel Becker authored
The masklog code is in the o2cb stack, but ocfs2_lockid.h now needs to be included by the user stack. The BUG() in ocfs2_lock_type_string() does not need masklog support, so change it to a regular BUG_ON(). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
David Teigland authored
Add code to use fs/dlm. [ Modified to be part of the stack_user module -- Joel ] Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-
Joel Becker authored
The "SETV" message sets the filesystem locking protocol version as negotiated by the client. The client negotiates based on the maximum version advertised in /sys/fs/ocfs2/max_locking_protocol. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
-