- 04 Nov, 2016 5 commits
-
-
Or Gerlitz authored
As for the current generation of the mlx5 HW (CX4/CX4-Lx) per flow vlan push/pop actions are emulated, we must not program them to the firmware. Fixes: f5f82476 ('net/mlx5: E-Switch, Support VLAN actions in the offloads mode') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
We ignored the vlan priority in offloaded TC rules matching part, fix that. Fixes: 095b6cfd ('net/mlx5e: Add TC vlan match parsing') Signed-off-by:
-
Or Gerlitz authored
VF reps should be altogether on the same NS as they were created. Signed-off-by:
-
Saeed Mahameed authored
In mlx5e_open_channel CQs must be created before napi is enabled. Here we move the XDP CQ creation to satisfy that fact. mlx5e_close_channel is already working according to the right order. Fixes: b5503b99 ("net/mlx5e: XDP TX forwarding support") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Saeed Mahameed authored
In case of mlx5e_open_rq fails the error handling will jump to label err_close_xdp_sq and will try to close the xdp_sq unconditionally. xdp_sq is valid only in case of XDP use cases, i.e priv->xdp_prog is not null. To fix this in this patch we test xdp_sq validity prior to closing it. In addition we now close the xdp_sq.cq as well. Fixes: b5503b99 ("net/mlx5e: XDP TX forwarding support") Signed-off-by:
-
- 03 Nov, 2016 16 commits
-
-
WANG Cong authored
cgroupstats_cmd_get_policy is [CGROUPSTATS_CMD_ATTR_MAX+1], taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1], but their family.maxattr is TASKSTATS_CMD_ATTR_MAX. CGROUPSTATS_CMD_ATTR_MAX is less than TASKSTATS_CMD_ATTR_MAX, so we could end up accessing out-of-bound. Change cgroupstats_cmd_get_policy to TASKSTATS_CMD_ATTR_MAX+1, this is safe because the rest are initialized to 0's. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
In __genl_register_family(), when genl_validate_assign_mc_groups() fails, we forget to free the memory we possibly allocate for family->attrbuf. Note, some callers call genl_unregister_family() to clean up on error path, it doesn't work because the family is inserted to the global list in the nearly last step. Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Eric Dumazet authored
While fuzzing kernel with syzkaller, Andrey reported a nasty crash in inet6_bind() caused by DCCP lacking a required method. Fixes: ab1e0a13 ("[SOCK] proto: Add hashinfo member to struct proto") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Currently the ehea driver is missing a call to netif_carrier_off() before the interface bring-up; this is necessary in order to initialize the __LINK_STATE_NOCARRIER bit in the net_device state field. Otherwise, we observe state UNKNOWN on "ip address" command output. This patch adds a call to netif_carrier_off() on ehea's net device open callback. Reported-by:
Xiong Zhou <zhou@redhat.com> Reference-ID: IBM bz #137702, Red Hat bz #1089134 Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by:
-
Eric Dumazet authored
dccp_v6_err() does not use pskb_may_pull() and might access garbage. We only need 4 bytes at the beginning of the DCCP header, like TCP, so the 8 bytes pulled in icmpv6_notify() are more than enough. Signed-off-by:
-
Eric Dumazet authored
A recent commit removed locking from netlink_diag_dump() but forgot one error case. ===================================== [ BUG: bad unlock balance detected! ] 4.9.0-rc3+ #336 Not tainted ------------------------------------- syz-executor/4018 is trying to release lock ([ 36.220068] nl_table_lock ) at: [<ffffffff82dc8683>] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 but there are no more locks to release! other info that might help us debug this: 3 locks held by syz-executor/4018: #0: [ 36.220068] ( sock_diag_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [<ffffffff82c3873b>] sock_diag_rcv+0x1b/0x40 #1: [ 36.220068] ( sock_diag_table_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [<ffffffff82c38e00>] sock_diag_rcv_msg+0x140/0x3a0 #2: [ 36.220068] ( nlk->cb_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [<ffffffff82db6600>] netlink_dump+0x50/0xac0 stack backtrace: CPU: 1 PID: 4018 Comm: syz-executor Not tainted 4.9.0-rc3+ #336 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff8800645df688 ffffffff81b46934 ffffffff84eb3e78 ffff88006ad85800 ffffffff82dc8683 ffffffff84eb3e78 ffff8800645df6b8 ffffffff812043ca dffffc0000000000 ffff88006ad85ff8 ffff88006ad85fd0 00000000ffffffff Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81b46934>] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [<ffffffff812043ca>] print_unlock_imbalance_bug+0x17a/0x1a0 kernel/locking/lockdep.c:3388 [< inline >] __lock_release kernel/locking/lockdep.c:3512 [<ffffffff8120cfd8>] lock_release+0x8e8/0xc60 kernel/locking/lockdep.c:3765 [< inline >] __raw_read_unlock ./include/linux/rwlock_api_smp.h:225 [<ffffffff83fc001a>] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 [<ffffffff82dc8683>] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 [<ffffffff82db6947>] netlink_dump+0x397/0xac0 net/netlink/af_netlink.c:2110 Fixes: ad202074 ("netlink: Use rhashtable walk interface in diag dump") Signed-off-by: -
Eric Dumazet authored
dccp_v4_err() does not use pskb_may_pull() and might access garbage. We only need 4 bytes at the beginning of the DCCP header, like TCP, so the 8 bytes pulled in icmp_socket_deliver() are more than enough. This patch might allow to process more ICMP messages, as some routers are still limiting the size of reflected bytes to 28 (RFC 792), instead of extended lengths (RFC 1812 4.3.2.3) Signed-off-by:
-
Eric Dumazet authored
Andrey reported following warning while fuzzing with syzkaller WARNING: CPU: 1 PID: 21072 at net/dccp/proto.c:83 dccp_set_state+0x229/0x290 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 21072 Comm: syz-executor Not tainted 4.9.0-rc1+ #293 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88003d4c7738 ffffffff81b474f4 0000000000000003 dffffc0000000000 ffffffff844f8b00 ffff88003d4c7804 ffff88003d4c7800 ffffffff8140c06a 0000000041b58ab3 ffffffff8479ab7d ffffffff8140beae ffffffff8140cd00 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81b474f4>] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [<ffffffff8140c06a>] panic+0x1bc/0x39d kernel/panic.c:179 [<ffffffff8111125c>] __warn+0x1cc/0x1f0 kernel/panic.c:542 [<ffffffff8111144c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [<ffffffff8389e5d9>] dccp_set_state+0x229/0x290 net/dccp/proto.c:83 [<ffffffff838a0aa2>] dccp_close+0x612/0xc10 net/dccp/proto.c:1016 [<ffffffff8316bf1f>] inet_release+0xef/0x1c0 net/ipv4/af_inet.c:415 [<ffffffff82b6e89e>] sock_release+0x8e/0x1d0 net/socket.c:570 [<ffffffff82b6e9f6>] sock_close+0x16/0x20 net/socket.c:1017 [<ffffffff815256ad>] __fput+0x29d/0x720 fs/file_table.c:208 [<ffffffff81525bb5>] ____fput+0x15/0x20 fs/file_table.c:244 [<ffffffff811727d8>] task_work_run+0xf8/0x170 kernel/task_work.c:116 [< inline >] exit_task_work include/linux/task_work.h:21 [<ffffffff8111bc53>] do_exit+0x883/0x2ac0 kernel/exit.c:828 [<ffffffff811221fe>] do_group_exit+0x10e/0x340 kernel/exit.c:931 [<ffffffff81143c94>] get_signal+0x634/0x15a0 kernel/signal.c:2307 [<ffffffff81054aad>] do_signal+0x8d/0x1a30 arch/x86/kernel/signal.c:807 [<ffffffff81003a05>] exit_to_usermode_loop+0xe5/0x130 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81006298>] syscall_return_slowpath+0x1a8/0x1e0 arch/x86/entry/common.c:259 [<ffffffff83fc1a62>] entry_SYSCALL_64_fastpath+0xc0/0xc2 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Fix this the same way we did for TCP in commit 565b7b2d ("tcp: do not send reset to already closed sockets") Signed-off-by:
-
Eric Dumazet authored
Andrey Konovalov reported following error while fuzzing with syzkaller : IPv4: Attempt to release alive inet socket ffff880068e98940 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 3905 Comm: a.out Not tainted 4.9.0-rc3+ #333 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88006b9e0000 task.stack: ffff880068770000 RIP: 0010:[<ffffffff819ead5f>] [<ffffffff819ead5f>] selinux_socket_sock_rcv_skb+0xff/0x6a0 security/selinux/hooks.c:4639 RSP: 0018:ffff8800687771c8 EFLAGS: 00010202 RAX: ffff88006b9e0000 RBX: 1ffff1000d0eee3f RCX: 1ffff1000d1d312a RDX: 1ffff1000d1d31a6 RSI: dffffc0000000000 RDI: 0000000000000010 RBP: ffff880068777360 R08: 0000000000000000 R09: 0000000000000002 R10: dffffc0000000000 R11: 0000000000000006 R12: ffff880068e98940 R13: 0000000000000002 R14: ffff880068777338 R15: 0000000000000000 FS: 00007f00ff760700(0000) GS:ffff88006cd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020008000 CR3: 000000006a308000 CR4: 00000000000006e0 Stack: ffff8800687771e0 ffffffff812508a5 ffff8800686f3168 0000000000000007 ffff88006ac8cdfc ffff8800665ea500 0000000041b58ab3 ffffffff847b5480 ffffffff819eac60 ffff88006b9e0860 ffff88006b9e0868 ffff88006b9e07f0 Call Trace: [<ffffffff819c8dd5>] security_sock_rcv_skb+0x75/0xb0 security/security.c:1317 [<ffffffff82c2a9e7>] sk_filter_trim_cap+0x67/0x10e0 net/core/filter.c:81 [<ffffffff82b81e60>] __sk_receive_skb+0x30/0xa00 net/core/sock.c:460 [<ffffffff838bbf12>] dccp_v4_rcv+0xdb2/0x1910 net/dccp/ipv4.c:873 [<ffffffff83069d22>] ip_local_deliver_finish+0x332/0xad0 net/ipv4/ip_input.c:216 [< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232 [< inline >] NF_HOOK ./include/linux/netfilter.h:255 [<ffffffff8306abd2>] ip_local_deliver+0x1c2/0x4b0 net/ipv4/ip_input.c:257 [< inline >] dst_input ./include/net/dst.h:507 [<ffffffff83068500>] ip_rcv_finish+0x750/0x1c40 net/ipv4/ip_input.c:396 [< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232 [< inline >] NF_HOOK ./include/linux/netfilter.h:255 [<ffffffff8306b82f>] ip_rcv+0x96f/0x12f0 net/ipv4/ip_input.c:487 [<ffffffff82bd9fb7>] __netif_receive_skb_core+0x1897/0x2a50 net/core/dev.c:4213 [<ffffffff82bdb19a>] __netif_receive_skb+0x2a/0x170 net/core/dev.c:4251 [<ffffffff82bdb493>] netif_receive_skb_internal+0x1b3/0x390 net/core/dev.c:4279 [<ffffffff82bdb6b8>] netif_receive_skb+0x48/0x250 net/core/dev.c:4303 [<ffffffff8241fc75>] tun_get_user+0xbd5/0x28a0 drivers/net/tun.c:1308 [<ffffffff82421b5a>] tun_chr_write_iter+0xda/0x190 drivers/net/tun.c:1332 [< inline >] new_sync_write fs/read_write.c:499 [<ffffffff8151bd44>] __vfs_write+0x334/0x570 fs/read_write.c:512 [<ffffffff8151f85b>] vfs_write+0x17b/0x500 fs/read_write.c:560 [< inline >] SYSC_write fs/read_write.c:607 [<ffffffff81523184>] SyS_write+0xd4/0x1a0 fs/read_write.c:599 [<ffffffff83fc02c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 It turns out DCCP calls __sk_receive_skb(), and this broke when lookups no longer took a reference on listeners. Fix this issue by adding a @refcounted parameter to __sk_receive_skb(), so that sock_put() is used only when needed. Fixes: 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by:
-
Eric Dumazet authored
After my commit, tcp_sendmsg() might restart its loop after processing socket backlog. If sk_err is set, we blindly return an error, even though we copied data to user space before. We should instead return number of bytes that could be copied, otherwise user space might resend data and corrupt the stream. This might happen if another thread is using recvmsg(MSG_ERRQUEUE) to process timestamps. Issue was diagnosed by Soheil and Willem, big kudos to them ! Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Lance Richardson authored
Some configurations (e.g. geneve interface with default MTU of 1500 over an ethernet interface with 1500 MTU) result in the transmission of packets that exceed the configured MTU. While this should be considered to be a "bad" configuration, it is still allowed and should not result in the sending of packets that exceed the configured MTU. Fix by dropping the assumption in ip_finish_output_gso() that locally originated gso packets will never need fragmentation. Basic testing using iperf (observing CPU usage and bandwidth) have shown no measurable performance impact for traffic not requiring fragmentation. Fixes: c7ba65d7 ("net: ip: push gso skb forwarding handling down the stack") Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David Ahern authored
Andrey reported the following error report while running the syzkaller fuzzer: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 648 Comm: syz-executor Not tainted 4.9.0-rc3+ #333 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800398c4480 task.stack: ffff88003b468000 RIP: 0010:[<ffffffff83091106>] [< inline >] inet_exact_dif_match include/net/tcp.h:808 RIP: 0010:[<ffffffff83091106>] [<ffffffff83091106>] __inet_lookup_listener+0xb6/0x500 net/ipv4/inet_hashtables.c:219 RSP: 0018:ffff88003b46f270 EFLAGS: 00010202 RAX: 0000000000000004 RBX: 0000000000004242 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000e3c000 RDI: 0000000000000054 RBP: ffff88003b46f2d8 R08: 0000000000004000 R09: ffffffff830910e7 R10: 0000000000000000 R11: 000000000000000a R12: ffffffff867fa0c0 R13: 0000000000004242 R14: 0000000000000003 R15: dffffc0000000000 FS: 00007fb135881700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020cc3000 CR3: 000000006d56a000 CR4: 00000000000006f0 Stack: 0000000000000000 000000000601a8c0 0000000000000000 ffffffff00004242 424200003b9083c2 ffff88003def4041 ffffffff84e7e040 0000000000000246 ffff88003a0911c0 0000000000000000 ffff88003a091298 ffff88003b9083ae Call Trace: [<ffffffff831100f4>] tcp_v4_send_reset+0x584/0x1700 net/ipv4/tcp_ipv4.c:643 [<ffffffff83115b1b>] tcp_v4_rcv+0x198b/0x2e50 net/ipv4/tcp_ipv4.c:1718 [<ffffffff83069d22>] ip_local_deliver_finish+0x332/0xad0 net/ipv4/ip_input.c:216 ... MD5 has a code path that calls __inet_lookup_listener with a null skb, so inet{6}_exact_dif_match needs to check skb against null before pulling the flag. Fixes: a04a480d ("net: Require exact match for TCP socket lookups if dif is l3mdev") Reported-by:David Ahern <dsa@cumulusnetworks.com> Tested-by:
-
Eric Dumazet authored
Imagine initial value of max_skb_frags is 17, and last skb in write queue has 15 frags. Then max_skb_frags is lowered to 14 or smaller value. tcp_sendmsg() will then be allowed to add additional page frags and eventually go past MAX_SKB_FRAGS, overflowing struct skb_shared_info. Fixes: 5f74f82e ("net:Add sysctl_max_skb_frags") Signed-off-by:
-
Mintz, Yuval authored
Driver allocates replacement buffers before-hand to make sure whenever an aggregation begins there would be a replacement for the Rx buffers, as we can't release the buffer until aggregation is terminated and driver logic assumes the Rx rings are always full. For every other Rx page that's being allocated [I.e., regular] the page is being completely mapped while for the replacement buffers only the first portion of the page is being mapped. This means that: a. Once replacement buffer replenishes the regular Rx ring, assuming there's more than a single packet on page we'd post unmapped memory toward HW [assuming mapping is actually done in granularity smaller than page]. b. Unmaps are being done for the entire page, which is incorrect. Fixes: 55482edc ("qede: Add slowpath/fastpath support and enable hardware GRO") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
WANG Cong authored
Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4608 at kernel/sched/core.c:7724 __might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff811f5a5c>] prepare_to_wait+0xbc/0x210 kernel/sched/wait.c:178 Modules linked in: CPU: 0 PID: 4608 Comm: syz-executor Not tainted 4.9.0-rc2+ #320 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006625f7a0 ffffffff81b46914 ffff88006625f818 0000000000000000 ffffffff84052960 0000000000000000 ffff88006625f7e8 ffffffff81111237 ffff88006aceac00 ffffffff00001e2c ffffed000cc4beff ffffffff84052960 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81b46914>] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [<ffffffff81111237>] __warn+0x1a7/0x1f0 kernel/panic.c:550 [<ffffffff8111132c>] warn_slowpath_fmt+0xac/0xd0 kernel/panic.c:565 [<ffffffff811922fc>] __might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719 [< inline >] slab_pre_alloc_hook mm/slab.h:393 [< inline >] slab_alloc_node mm/slub.c:2634 [< inline >] slab_alloc mm/slub.c:2716 [<ffffffff81508da0>] __kmalloc_track_caller+0x150/0x2a0 mm/slub.c:4240 [<ffffffff8146be14>] kmemdup+0x24/0x50 mm/util.c:113 [<ffffffff8388b2cf>] dccp_feat_clone_sp_val.part.5+0x4f/0xe0 net/dccp/feat.c:374 [< inline >] dccp_feat_clone_sp_val net/dccp/feat.c:1141 [< inline >] dccp_feat_change_recv net/dccp/feat.c:1141 [<ffffffff8388d491>] dccp_feat_parse_options+0xaa1/0x13d0 net/dccp/feat.c:1411 [<ffffffff83894f01>] dccp_parse_options+0x721/0x1010 net/dccp/options.c:128 [<ffffffff83891280>] dccp_rcv_state_process+0x200/0x15b0 net/dccp/input.c:644 [<ffffffff838b8a94>] dccp_v4_do_rcv+0xf4/0x1a0 net/dccp/ipv4.c:681 [< inline >] sk_backlog_rcv ./include/net/sock.h:872 [<ffffffff82b7ceb6>] __release_sock+0x126/0x3a0 net/core/sock.c:2044 [<ffffffff82b7d189>] release_sock+0x59/0x1c0 net/core/sock.c:2502 [< inline >] inet_wait_for_connect net/ipv4/af_inet.c:547 [<ffffffff8316b2a2>] __inet_stream_connect+0x5d2/0xbb0 net/ipv4/af_inet.c:617 [<ffffffff8316b8d5>] inet_stream_connect+0x55/0xa0 net/ipv4/af_inet.c:656 [<ffffffff82b705e4>] SYSC_connect+0x244/0x2f0 net/socket.c:1533 [<ffffffff82b72dd4>] SyS_connect+0x24/0x30 net/socket.c:1514 [<ffffffff83fbf701>] entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:209 Unlike commit 26cabd31 ("sched, net: Clean up sk_wait_event() vs. might_sleep()"), the sleeping function is called before schedule_timeout(), this is indeed a bug. Fix this by moving the wait logic to the new API, it is similar to commit ff960a73 ("netdev, sched/wait: Fix sleeping inside wait event"). Reported-by:
-
- 02 Nov, 2016 4 commits
-
-
Dongli Zhang authored
IS_ERR_VALUE() in commit 87557efc ("xen-netfront: do not cast grant table reference to signed short") would not return true for error code unless we cast ref first to type int. Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by:
-
Eli Cooper authored
Some IPCB fields are currently set in udp_tunnel6_xmit_skb(), which are never used before it reaches ip6tunnel_xmit(), and past that point the control buffer is no longer interpreted as IPCB. This clears these unused IPCB related codes. Currently there is no skb scrubbing in ip6_udp_tunnel, otherwise IPCB(skb)->opt might need to be cleared for IPv4 packets, as shown in 5146d1f1 ("tunnel: Clear IPCB(skb)->opt before dst_link_failure called"). Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
-
Eli Cooper authored
skb->cb may contain data from previous layers. In the observed scenario, the garbage data were misinterpreted as IP6CB(skb)->frag_max_size, so that small packets sent through the tunnel are mistakenly fragmented. This patch unconditionally clears the control buffer in ip6tunnel_xmit(), which affects ip6_tunnel, ip6_udp_tunnel and ip6_gre. Currently none of these tunnels set IP6CB(skb)->flags, otherwise it needs to be done earlier. Cc: stable@vger.kernel.org Signed-off-by:
-
Saeed Mahameed authored
Add myself as a maintainer for mlx5 core driver as well. Signed-off-by:
-
- 01 Nov, 2016 9 commits
-
-
Russell King authored
The coalesce settings behave badly when changing just one value: ... # ethtool -c eth0 rx-usecs: 249 ... # ethtool -C eth0 tx-usecs 250 ... # ethtool -c eth0 rx-usecs: 248 This occurs due to rounding errors when calculating the microseconds value - the divisons round down. This causes (eg) the rx-usecs to decrease by one every time the tx-usecs value is set as per the above. Fix this by making the divison round-to-nearest. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Christophe Jaillet authored
'create_root_ns()' does not return an error pointer, so the test can be simplified to be more consistent. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Isaac Boukris authored
Abstract unix domain socket may embed null characters, these should be translated to '@' when printed out to proc the same way the null prefix is currently being translated. This helps for tools such as netstat, lsof and the proc based implementation in ss to show all the significant bytes of the name (instead of getting cut at the first null occurrence). Signed-off-by:
Isaac Boukris <iboukris@gmail.com> Signed-off-by:
-
Timur Tabi authored
The documentation says that SGMII_LN_UCDR_SO_GAIN_MODE0 should be set to 0, not 6, on the Qualcomm Technologies QDF2432. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Fix coalescing bugs This patch set fixes the following, 1. Since ethernet v1 hardware has a bug related to coalescing, disabling this feature 2. Fixing ethernet v2 hardware, interrupt trigger region id to 2, to kickoff coalescing ==================== Signed-off-by:Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
Changing the interrupt trigger region id to 2 and the corresponding threshold set0/set1 values to 8/16. Signed-off-by:
Toan Le <toanle@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
Since ethernet v1 hardware has a bug related to coalescing, disabling this feature. Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.9-20161031' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-10-31 this is a pull request of two patches for the upcoming v4.9 release. The first patch is by Lukas Resch for the sja1000 plx_pci driver that adds support for Moxa CAN devices. The second patch is by Oliver Hartkopp and fixes a potential kernel panic in the CAN broadcast manager. ==================== Signed-off-by:
-
Andy Gospodarek authored
Current bgmac code initializes some DMA settings in the receive control register for some hardware and then immediately clears those settings. Not clearing those settings results in ~420Mbps *improvement* in throughput; this system can now receive frames at line-rate on Broadcom 5871x hardware compared to ~520Mbps today. I also tested a few other values but found there to be no discernible difference in CPU utilization even if burst size and prefetching values are different. On the hardware tested there was no need to keep the code that cleared all but bits 16-17, but since there is a wide variety of hardware that used this driver (I did not look at all hardware docs for hardware using this IP block), I find it wise to move this call up and clear bits just after reading the default value from the hardware rather than completely removing it. This is a good candidate for -stable >=3.14 since that is when the code that was supposed to improve performance (but did not) was introduced. Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Fixes: 56ceecde ("bgmac: initialize the DMA controller of core...") Cc: Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
- 31 Oct, 2016 6 commits
-
-
David S. Miller authored
Xin Long says: ==================== sctp: a bunch of fixes by holding transport There are several places where it holds assoc after getting transport by searching from transport rhashtable, it may cause use-after-free issue. This patchset is to fix them by holding transport instead. v1->v2: Fix the changelog of patch 2/3 ==================== Signed-off-by: -
Xin Long authored
Prior to this patch, in rx path, before calling lock_sock, it needed to hold assoc when got it by __sctp_lookup_association, in case other place would free/put assoc. But in __sctp_lookup_association, it lookup and hold transport, then got assoc by transport->assoc, then hold assoc and put transport. It means it didn't hold transport, yet it was returned and later on directly assigned to chunk->transport. Without the protection of sock lock, the transport may be freed/put by other places, which would cause a use-after-free issue. This patch is to fix this issue by holding transport instead of assoc. As holding transport can make sure to access assoc is also safe, and actually it looks up assoc by searching transport rhashtable, to hold transport here makes more sense. Note that the function will be renamed later on on another patch. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
Prior to this patch, it used a local variable to save the transport that is looked up by __sctp_lookup_association(), and didn't return it back. But in sctp_rcv, it is used to initialize chunk->transport. So when hitting this, even if it found the transport, it was still initializing chunk->transport with null instead. This patch is to return the transport back through transport pointer that is from __sctp_rcv_lookup_harder(). Signed-off-by:
-
Xin Long authored
In sctp_transport_lookup_process(), Commit 1cceda78 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") moved cb() out of rcu lock, but it put transport and hold assoc instead, and ignore that cb() still uses transport. It may cause a use-after-free issue. This patch is to hold transport instead of assoc there. Fixes: 1cceda78 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") Signed-off-by:
-
Dongli Zhang authored
While grant reference is of type uint32_t, xen-netfront erroneously casts it to signed short in BUG_ON(). This would lead to the xen domU panic during boot-up or migration when it is attached with lots of paravirtual devices. Signed-off-by:
-
Oliver Hartkopp authored
Andrey Konovalov reported an issue with proc_register in bcm.c. As suggested by Cong Wang this patch adds a lock_sock() protection and a check for unsuccessful proc_create_data() in bcm_connect(). Reference: http://marc.info/?l=linux-netdev&m=147732648731237Reported-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
