1. 16 Sep, 2016 8 commits
    • Maor Gottlieb's avatar
      IB/mlx5: Set source mac address in FTE · ee3da804
      Maor Gottlieb authored
      Set the source mac address in the FTE when L2 specification
      is provided.
      
      Fixes: 038d2ef8 ('IB/mlx5: Add flow steering support')
      Signed-off-by: default avatarMaor Gottlieb <maorg@mellanox.com>
      Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      ee3da804
    • Noa Osherovich's avatar
      IB/mlx5: Enable MAD_IFC commands for IB ports only · 7fae6655
      Noa Osherovich authored
      MAD_IFC command is supported only for physical functions (PF)
      and when physical port is IB. The proposed fix enforces it.
      
      Fixes: d603c809 ("IB/mlx5: Fix decision on using MAD_IFC")
      Reported-by: default avatarDavid Chang <dchang@suse.com>
      Signed-off-by: default avatarNoa Osherovich <noaos@mellanox.com>
      Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      7fae6655
    • Kamal Heib's avatar
      IB/mlx4: Diagnostic HW counters are not supported in slave mode · 69d269d3
      Kamal Heib authored
      Modify the mlx4_ib_diag_counters() to avoid the following error in the
      hypervisor when the slave tries to query the hardware counters in SR-IOV
      mode.
      
      mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1
      
      Fixes: 3f85f2aa ("IB/mlx4: Add diagnostic hardware counters")
      Signed-off-by: default avatarKamal Heib <kamalh@mellanox.com>
      Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      69d269d3
    • Jack Morgenstein's avatar
      IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV · 8ec07bf8
      Jack Morgenstein authored
      When sending QP1 MAD packets which use a GRH, the source GID
      (which consists of the 64-bit subnet prefix, and the 64 bit port GUID)
      must be included in the packet GRH.
      
      For SR-IOV, a GID cache is used, since the source GID needs to be the
      slave's source GID, and not the Hypervisor's GID. This cache also
      included a subnet_prefix. Unfortunately, the subnet_prefix field in
      the cache was never initialized (to the default subnet prefix 0xfe80::0).
      As a result, this field remained all zeroes.  Therefore, when SR-IOV
      was active, all QP1 packets which included a GRH had a source GID
      subnet prefix of all-zeroes.
      
      However, the subnet-prefix should initially be 0xfe80::0 (the default
      subnet prefix). In addition, if OpenSM modifies a port's subnet prefix,
      the new subnet prefix must be used in the GRH when sending QP1 packets.
      To fix this we now initialize the subnet prefix in the SR-IOV GID cache
      to the default subnet prefix. We update the cached value if/when OpenSM
      modifies the port's subnet prefix. We take this cached value when sending
      QP1 packets when SR-IOV is active.
      
      Note that the value is stored as an atomic64. This eliminates any need
      for locking when the subnet prefix is being updated.
      
      Note also that we depend on the FW generating the "port management change"
      event for tracking subnet-prefix changes performed by OpenSM. If running
      early FW (before 2.9.4630), subnet prefix changes will not be tracked (but
      the default subnet prefix still will be stored in the cache; therefore
      users who do not modify the subnet prefix will not have a problem).
      IF there is a need for such tracking also for early FW, we will add that
      capability in a subsequent patch.
      
      Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      8ec07bf8
    • Jack Morgenstein's avatar
      IB/mlx4: Fix code indentation in QP1 MAD flow · baa0be70
      Jack Morgenstein authored
      The indentation in the QP1 GRH flow in procedure build_mlx_header is
      really confusing. Fix it, in preparation for a commit which touches
      this code.
      
      Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      baa0be70
    • Alex Vesker's avatar
      IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV · e5ac40cd
      Alex Vesker authored
      Because of an incorrect bit-masking done on the join state bits, when
      handling a join request we failed to detect a difference between the
      group join state and the request join state when joining as send only
      full member (0x8). This caused the MC join request not to be sent.
      This issue is relevant only when SRIOV is enabled and SM supports
      send only full member.
      
      This fix separates scope bits and join states bits a nibble each.
      
      Fixes: b9c5d6a6 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
      Signed-off-by: default avatarAlex Vesker <valex@mellanox.com>
      Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      e5ac40cd
    • Alex Vesker's avatar
      IB/ipoib: Don't allow MC joins during light MC flush · 344bacca
      Alex Vesker authored
      This fix solves a race between light flush and on the fly joins.
      Light flush doesn't set the device to down and unset IPOIB_OPER_UP
      flag, this means that if while flushing we have a MC join in progress
      and the QP was attached to BC MGID we can have a mismatches when
      re-attaching a QP to the BC MGID.
      
      The light flush would set the broadcast group to NULL causing an on
      the fly join to rejoin and reattach to the BC MCG as well as adding
      the BC MGID to the multicast list. The flush process would later on
      remove the BC MGID and detach it from the QP. On the next flush
      the BC MGID is present in the multicast list but not found when trying
      to detach it because of the previous double attach and single detach.
      
      [18332.714265] ------------[ cut here ]------------
      [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core]
      ...
      [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
      [18332.779411]  0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000
      [18332.784960]  0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300
      [18332.790547]  ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280
      [18332.796199] Call Trace:
      [18332.798015]  [<ffffffff813fed47>] dump_stack+0x63/0x8c
      [18332.801831]  [<ffffffff8109add1>] __warn+0xd1/0xf0
      [18332.805403]  [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20
      [18332.809706]  [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core]
      [18332.814384]  [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib]
      [18332.820031]  [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib]
      [18332.825220]  [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib]
      [18332.830290]  [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib]
      [18332.834911]  [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0
      [18332.839741]  [<ffffffff81772bd1>] rollback_registered+0x31/0x40
      [18332.844091]  [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80
      [18332.848880]  [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib]
      [18332.853848]  [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib]
      [18332.858474]  [<ffffffff81520c08>] dev_attr_store+0x18/0x30
      [18332.862510]  [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50
      [18332.866349]  [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170
      [18332.870471]  [<ffffffff81207198>] __vfs_write+0x28/0xe0
      [18332.874152]  [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50
      [18332.878274]  [<ffffffff81208062>] vfs_write+0xa2/0x1a0
      [18332.881896]  [<ffffffff812093a6>] SyS_write+0x46/0xa0
      [18332.885632]  [<ffffffff810039b7>] do_syscall_64+0x57/0xb0
      [18332.889709]  [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25
      [18332.894727] ---[ end trace 09ebbe31f831ef17 ]---
      
      Fixes: ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events")
      Signed-off-by: default avatarAlex Vesker <valex@mellanox.com>
      Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      344bacca
    • Alexey Khoroshilov's avatar
      IB/rxe: fix GFP_KERNEL in spinlock context · 5e102b3b
      Alexey Khoroshilov authored
      There is skb_clone(skb, GFP_KERNEL) in spinlock context
      in rxe_rcv_mcast_pkt().
      
      Found by Linux Driver Verification project (linuxtesting.org).
      Signed-off-by: default avatarAlexey Khoroshilov <khoroshilov@ispras.ru>
      Acked-by: default avatarMoni Shoua <monis@mellanox.com>
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      5e102b3b
  2. 02 Sep, 2016 17 commits
  3. 26 Aug, 2016 3 commits
  4. 25 Aug, 2016 2 commits
  5. 24 Aug, 2016 7 commits
  6. 23 Aug, 2016 3 commits