- 13 Sep, 2016 8 commits
-
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
-
- 12 Sep, 2016 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Mostly small sets of driver fixes scattered all over the place. 1) Mediatek driver fixes from Sean Wang. Forward port not written correctly during TX map, missed handling of EPROBE_DEFER, and mistaken use of put_page() instead of skb_free_frag(). 2) Fix socket double-free in KCM code, from WANG Cong. 3) QED driver fixes from Sudarsana Reddy Kalluru, including a fix for using the dcbx buffers before initializing them. 4) Mellanox Switch driver fixes from Jiri Pirko, including a fix for double fib removals and an error handling fix in mlxsw_sp_module_init(). 5) Fix kernel panic when enabling LLDP in i40e driver, from Dave Ertman. 6) Fix padding of TSO packets in thunderx driver, from Sunil Goutham. 7) TCP's rcv_wup not initialized properly when using fastopen, from Neal Cardwell. 8) Don't use uninitialized flow keys in flow dissector, from Gao Feng. 9) Use after free in l2tp module unload, from Sabrina Dubroca. 10) Fix interrupt registry ordering issues in smsc911x driver, from Jeremy Linton. 11) Fix crashes in bonding having to do with enslaving and rx_handler, from Mahesh Bandewar. 12) AF_UNIX deadlock fixes from Linus. 13) In mlx5 driver, don't read skb->xmit_mode after it might have been freed from the TX reclaim path. From Tariq Toukan. 14) Fix a bug from 2015 in TCP Yeah where the congestion window does not increase, from Artem Germanov. 15) Don't pad frames on receive in NFP driver, from Jakub Kicinski. 16) Fix chunk fragmenting in SCTP wrt. GSO, from Marcelo Ricardo Leitner. 17) Fix deletion of VRF routes, from Mark Tomlinson. 18) Fix device refcount leak when DAD fails in ipv6, from Wei Yongjun" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits) net/mlx4_en: Fix panic on xmit while port is down net/mlx4_en: Fixes for DCBX net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state() net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all() net: ethernet: renesas: sh_eth: add POST registers for rz drivers: net: phy: mdio-xgene: Add hardware dependency dwc_eth_qos: do not register semi-initialized device sctp: identify chunks that need to be fragmented at IP level mlxsw: spectrum: Set port type before setting its address mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_init nfp: don't pad frames on receive nfp: drop support for old firmware ABIs nfp: remove linux/version.h includes tcp: cwnd does not increase in TCP YeAH net/mlx5e: Fix parsing of vlan packets when updating lro header net/mlx5e: Fix global PFC counters replication net/mlx5e: Prevent casting overflow net/mlx5e: Move an_disable_cap bit to a new position net/mlx5e: Fix xmit_more counter race issue tcp: fastopen: avoid negative sk_forward_alloc ... -
Linus Torvalds authored
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 fixes This patchset contains several bug fixes from the team to the mlx4 Eth driver. Series generated against net commit: c2f57fb9 "drivers: net: phy: mdio-xgene: Add hardware dependency" v2: * excluded some cleanup patches. ==================== Signed-off-by:
-
Moshe Shemesh authored
When port is down, tx drop counter update is not needed. Updating the counter in this case can cause a kernel panic as when the port is down, ring can be NULL. Fixes: 63a664b7 ("net/mlx4_en: fix tx_dropped bug") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
This patch adds a capability check before enabling DCBX. In addition, it re-organizes the relevant data structures, and fixes a typo in a define. Fixes: af7d5185 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by:
-
Kamal Heib authored
mlx4_en_dcbnl_set_state() returns u8, the return value from mlx4_en_setup_tc() could be negative in case of failure, so fix that. Fixes: af7d5185 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by:
Kamal Heib <kamalh@mellanox.com> Signed-off-by:
-
Kamal Heib authored
mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in case of failure. Fixes: af7d5185 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by:
Rana Shahout <ranas@mellanox.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Florian Fainelli authored
While migrating the bcm_sf2 driver to use b53_common, we left a small piece untouched where we kept our local copy of the per-port port_vlan_ctl bitmask value. This value is now maintained by b53_device so we need to use it instead of our local (and now stale) copy of it. Fixes: f458995b ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 11 Sep, 2016 23 commits
-
-
Linus Torvalds authored
Commit aa719874 ("nvme: fabrics drivers don't need the nvme-pci driver") removed the dependency on BLK_DEV_NVME, but the cdoe does depend on the block layer (which used to be an implicit dependency through BLK_DEV_NVME). Otherwise you get various errors from the kbuild test robot random config testing when that happens to hit a configuration with BLOCK device support disabled. Cc: Christoph Hellwig <hch@lst.de> Cc: Jay Freyensee <james_p_freyensee@linux.intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull IIO fixes from Greg KH: "Here are a few small IIO fixes for 4.8-rc6. Nothing major, full details are in the shortlog, all of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio:core: fix IIO_VAL_FRACTIONAL sign handling iio: ensure ret is initialized to zero before entering do loop iio: accel: kxsd9: Fix scaling bug iio: accel: bmc150: reset chip at init time iio: fix pressure data output unit in hid-sensor-attributes tools:iio:iio_generic_buffer: fix trigger-less mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB gadget, phy, and xhci fixes for 4.8-rc6. All of these resolve minor issues that have been reported, and all have been in linux-next with no reported issues" * tag 'usb-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase xhci: fix null pointer dereference in stop command timeout function usb: dwc3: pci: fix build warning on !PM_SLEEP usb: gadget: prevent potenial null pointer dereference on skb->len usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition usb: phy: phy-generic: Check clk_prepare_enable() error usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON Revert "usb: dwc3: gadget: always decrement by 1"
-
David S. Miller authored
David Ahern says: ==================== net: Convert vrf to tx hook The motivation for this series is that ICMP Unreachable - Fragmentation Needed packets are not handled properly for VRFs. Specifically, the FIB lookup in __ip_rt_update_pmtu fails so no nexthop exception is created with the reduced MTU. As a result connections stall if packets larger than the smallest MTU in the path are generated. While investigating that problem I also noticed that the MSS for all connections in a VRF is based on the VRF device's MTU and not the route the packets ultimately go through. VRF currently uses a dst to direct packets to the device. The first FIB lookup returns this dst and then the lookup in the VRF driver gets the actual output route. A side effect of this design is that the VRF dst is cached on sockets and then used for calculations like the MSS. This series fixes this problem by removing the hook in the FIB lookups that returns the dst pointing to the VRF device to the VRF and always doing the actual FIB lookup. This allows the real dst to be used throughout the stack (for example the MSS). Packets are diverted to the VRF device on Tx using an l3mdev hook in the output path similar to to what is done for Rx. The end result is a simpler implementation for VRF with fewer intrusions into the network stack and symmetrical packet handling for Rx and Tx paths. Comparison of netperf performance for a build without l3mdev (best case performance), the old vrf driver and the VRF driver from this series. Data are collected using VMs with virtio + vhost. The netperf client runs in the VM and netserver runs in the host. 1-byte RR tests are done as these packets exaggerate the performance hit due to the extra lookups done for l3mdev and VRF. Command: netperf -cC -H ${ip} -l 60 -t {TCP,UDP}_RR [-J red] TCP_RR UDP_RR IPv4 IPv6 IPv4 IPv6 no l3mdev 29,996 30,601 31,638 24,336 vrf old 27,417 27,626 29,159 24,801 vrf new 28,036 28,372 30,110 24,857 l3mdev, no vrf 29,534 30,465 30,670 24,346 * Transactions per second as reported by netperf * netperf modified to take a bind-to-device argument -- the -J red option 1. 'no l3mdev' == NET_L3_MASTER_DEV is unset so code is compiled out 2. 'vrf old' == data for existing implementation 3. 'vrf new' == data with this series 4. 'l3mdev, no vrf' == NET_L3_MASTER_DEV is enabled but traffic is not going through a VRF About the series - patch 1 adds the flow update (changing oif or iif to L3 master device and setting the flag to skip the oif check) to ipv4 and ipv6 paths just before hitting the rules. This catches all code paths in a single spot. - patch 2 adds the Tx hook to push the packet to the l3mdev if relevant - patch 3 adds some checks so the vrf device can act as a vrf-local loopback. These changes were not needed before since the vrf dst was returned from the lookup. - patches 4 and 5 flip the ipv4 and ipv6 stacks to the tx hook leaving the route lookup to be the real one. The dst flip happens at the beginning of the L3 output path so the VRFs can have device based features such as netfilter, tc and tcpdump. - patches 6-11 remove no longer needed l3mdev code v2 - properly handle IPv6 link scope addresses - keep the device xmit path and associated dst which is switched in by the l3_out hook. packets still need to go through the xmit path in case the user puts a qdisc on the vrf device and to allow tc rules. version 1 short circuited the tx handling and only covered netfilter and tcpdump. ==================== Signed-off-by: -
David Ahern authored
No longer used Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
No longer used Signed-off-by:
-
David Ahern authored
No longer used Signed-off-by:
-
David Ahern authored
No longer needed Signed-off-by:
-
David Ahern authored
No longer needed Signed-off-by:
-
David Ahern authored
A previous patch added l3mdev flow update making these hooks redundant. Remove them. Signed-off-by:
-
David Ahern authored
Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by:
-
David Ahern authored
Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by:
-
David Ahern authored
Allow an L3 master device to act as the loopback for that L3 domain. For IPv4 the device can also have the address 127.0.0.1. Signed-off-by:
-
David Ahern authored
This patch adds the infrastructure to the output path to pass an skb to an l3mdev device if it has a hook registered. This is the Tx parallel to l3mdev_ip{6}_rcv in the receive path and is the basis for removing the existing hook that returns the vrf dst on the fib lookup. Signed-off-by: -
David Ahern authored
Add l3mdev hook to set FLOWI_FLAG_SKIP_NH_OIF flag and update oif/iif in flow struct if its oif or iif points to a device enslaved to an L3 Master device. Only 1 needs to be converted to match the l3mdev FIB rule. This moves the flow adjustment for l3mdev to a single point catching all lookups. It is redundant for existing hooks (those are removed in later patches) but is needed for missed lookups such as PMTU updates. Signed-off-by:
-
Markus Elfring authored
Adjust the indentation for a call of the macro "DPRINTK" in this function. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
* The script "checkpatch.pl" can point information out like the following. WARNING: Prefer kcalloc over kzalloc with multiply Thus fix the affected source code place. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. * Delete the local variable "size" which became unnecessary with this refactoring. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" can point out that assignments should usually not be performed within condition checks. Thus move an assignment for a local variable to a separate statement in this function. Signed-off-by:
-
Markus Elfring authored
* The script "checkpatch.pl" can point out that assignments should usually not be performed within condition checks. Thus move an assignment for a local variable to a separate statement in this function. * Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a reference for a field in a local variable as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
