- 03 Dec, 2020 40 commits
-
-
Ezequiel Garcia authored
When V4L2_CTRL_TYPE_H264_PRED_WEIGHTS was added, adding a replace symbol directive in videodev2.h.rst.exceptions was missed. Now that the control type is destaged, it's important to fix this. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
Since we are ready to stabilize the H264 stateless API, start by first moving the parsed H264 pixel format. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Ezequiel Garcia authored
Add a new control class to hold the stateless codecs controls that are ready to be moved out of staging. Signed-off-by:
-
Ezequiel Garcia authored
Check that all the fields that correspond or are related to a H264 specification syntax element have legal values. Signed-off-by:
-
Ezequiel Garcia authored
Avoid including h264-ctrls.h, vp8-ctrls.h, etc, and instead just include v4l2-ctrls.h which does the right thing. This is in preparation for moving the stateless controls out of staging, which will mean removing some of these headers. Signed-off-by:
-
Ezequiel Garcia authored
For historical reasons, stateful codec controls are named as {}_MPEG_{}. While we can't at this point sanely change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER), we can least change the more meaningful macros such as classes macros. Signed-off-by: -
Ezequiel Garcia authored
Cedrus supports H.264 profiles from Baseline to High, except for the Extended profile Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE so that userspace can query the driver for the supported profiles and levels. Signed-off-by:
-
Jonas Karlman authored
The Rockchip Video Decoder used in RK3399 supports H.264 profiles from Baseline to High 4:2:2 up to Level 5.1, except for the Extended profile. Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE and the V4L2_CID_MPEG_VIDEO_H264_LEVEL control, so that userspace can query the driver for the list of supported profiles and level. For now, we don't expose 4:2:2 since the driver doesn't implement the required support. [Ezequiel: Don't expose 4:2:2 profile for now] Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Ezequiel Garcia authored
Add a debug message for control validation (validate_new) failures. This is useful to debug issues with ioctls such as VIDIOC_TRY_EXT_CTRLS and VIDIOC_S_EXT_CTRLS. Signed-off-by:
-
Hans Verkuil authored
V4L2_CTRL_CLASS_DETECT was never documented here, add it. Signed-off-by:
-
Ezequiel Garcia authored
The VP8_FRAME_HEADER control type is validated, so it needs a corresponding initialization to produce default legal values. For now, only add the minimum required initialization to satisfy current validation. Signed-off-by:
-
Sakari Ailus authored
Use regulators vio and vcore besides vana. The regulators were always there but on many boards they've been hard wired. Control them explicitly now. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Vcore and vio supplies are also part of the spec and used by many sensors. Do not specify the voltages as they are generally sensor dependent. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
It was mentioned vana voltage is typically 2,8 volts. This is truly sensor dependent, and nowadays 2,8 volts is a lot. Signed-off-by:
-
Sakari Ailus authored
SMIA nor CCS need these delays; remove them. Signed-off-by:
-
Sakari Ailus authored
Longer idle period is required on I²C bus before the first transaction after lifting xshutdown. Signed-off-by:
-
Sakari Ailus authored
Over the years (and renaming) some lines that may well be wrapped ended up being over 80 characters, likewise there are shorter lines that can be merged. Do that. Signed-off-by:
-
Sakari Ailus authored
If pm_runtime_get_sync() fails, there's no need to set the device active again. Also, in the same case to return the usage_count to zero, pm_runtime_put_noidle() is enough. Signed-off-by:
-
Sakari Ailus authored
Access read-only registers from CCS static data. Signed-off-by:
-
Sakari Ailus authored
Write manufacturer specific registers (MSRs) from file to the sensor on sensor power-on. Signed-off-by:
-
Sakari Ailus authored
Make the delay between I²C access retries a range between 1 and 2 ms. Also make the number of retries 10 instead of 5, in order not to reduce the total amount of time. Signed-off-by:
-
Sakari Ailus authored
Use my @linux.intel.com e-mail address in the CCS driver. Signed-off-by:
-
Sakari Ailus authored
Change MODULE_LICENSE to "GPL v2" as indicated by the SPDX tag. Signed-off-by:
-
Sakari Ailus authored
MIPI CCS replaces SMIA and SMIA++ as the current standard. CCS brings new features while existing functionality will be supported. Rename the smiapp-pll as ccs-pll accordingly. Also add Intel copyright to the files. Signed-off-by:
-
Sakari Ailus authored
Some limit values are available in q16.q16 format, referred to as 32-bit unsigned ireal in CCS. Read these correctly. Signed-off-by:
-
Sakari Ailus authored
Instead of converting the limit values at register read time, do that at access time instead. Signed-off-by:
-
Sakari Ailus authored
The limit values will be raw soon, and the conversion takes place later on. Prepare for that. Signed-off-by:
-
Sakari Ailus authored
Rework quirk and 8-bit only access functions with a single function that takes arguments. This is later extensible to support yet more flags. Signed-off-by:
-
Sakari Ailus authored
If an internal driver error was encountered, BUG was issued. Instead, do less harsh WARN_ON_ONCE and try to manage with the consequences. Signed-off-by:
-
Sakari Ailus authored
The NULL check is not needed as the functions do not return NULL. Remove the check (and BUG). Signed-off-by:
-
Sakari Ailus authored
The register arrays have a certain size but not all the entries will be relevant. In practice reading can be stopped after encountering a zero value in the array. Do that to avoid extra reads. Signed-off-by:
-
Sakari Ailus authored
Read the CCS static data for sensors and modules. The files are expected to be found in "ccs" directory. Signed-off-by:
-
Sakari Ailus authored
The module revision number major and minor are both 8 bits while the sensor revision number is 16 bits. Combine the module revision into one number. This also adds printing the lowest 8 bits of the module version through the sysfs attribute. Signed-off-by:
-
Sakari Ailus authored
Add a parser library for parsing the CCS static data format. The library may be also compiled in user space as the format has uses also in the user space. Therefore it is dual licensed under the 3-clause BSD license as well. Signed-off-by:
-
Sakari Ailus authored
Let v4l2_fwnode_endpoint_alloc_parse to figure out the type of the data bus. As the old bindings did not require the "bus-type" property, we need to rely on guessing between CSI-2 D-PHY and CCP2. Setting the type to CSI-2 D-PHY will parse just that and succeed even if no data-lanes are set. Also add a comment on the matter to the driver to avoid breaking this in the future. Signed-off-by:
-
Sakari Ailus authored
There's no need to allocate the hardware configuration struct separately. Put it in struct ccs_sensor. Signed-off-by:
-
Sakari Ailus authored
No need to support platform data; remove support for conveying hardware configuration that way. Signed-off-by:
-
Sakari Ailus authored
The I²C ID table is no longer needed; remove it. Signed-off-by:
-
Sakari Ailus authored
The CCS compliant sensors use device ID "MIPI0200". Use this id for ACPI device matching. Signed-off-by:
-
Sakari Ailus authored
Add device data specific to DT compatible ID to tell SMIA and CCS devices apart already in power-up. Signed-off-by:
-
