- 01 Oct, 2019 40 commits
-
-
Hans Verkuil authored
These defines were never added to this CEC header, likely due to laziness on the part of the original author, i.e. me. But it is useful to have them, so add them. Also update the cec.h.rst.exceptions file to avoid errors when building the documentation. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
Now that proper V4L2 pixel formats exist for all 32-bit RGB permutations, drop support for the poorly defined legacy format V4L2_PIX_FMT_BGR32. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Since the uapi does not contain the num_ref_idx_active_override_flag, drivers for decoders that do not parse slices themselves don't know how to choose between the num_ref_idx_l[01]_default_active and the num_ref_idx_l[01]_active override fields. Instead, userspace must set the override fields to the default values if the slice does not have the num_ref_idx_active_override flag set. The drivers will then always enable the override internally and ignore the default fields completely. Clarify this requirement in the API documentation. Signed-off-by:
-
Philipp Zabel authored
Document that the slice headers must be included for the benefit of decoders that parse them (partially) in hardware, and that the start code is optional. Add a link to the ITU-T Rec. H.264 specification section that describes the slice format. Signed-off-by:
-
Boris Brezillon authored
Step '8.2.4.1 Decoding process for picture numbers' was missing in the reflist creation logic, leading to invalid P reflists when a ->frame_num wraparound happens. Fixes: a9471e25 ("media: hantro: Add core bits to support H264 decoding") Reported-by:
Francois Buergisser <fbuergisser@google.com> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Francois Buergisser <fbuergisser@chromium.org> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Boris Brezillon authored
And use it for all native type comparisons, even if it's not strictly required. By doing that we make the code more consistent and prevent from potential incorrect results in case of overflow or when the the values being compared are both negative. Signed-off-by:
-
Boris Brezillon authored
So it matches the code and the spec. Signed-off-by:
-
Niklas Söderlund authored
The hardware is capable to passing V4L2_FIELD_ALTERNATE to user-space. Allow users to request this field format but still default to using the hardware interlacer if alternating is not explicitly requested. Before this change a sensor providing data using alternate would be always combined to an interlaced frame. After this change the user can request to receive frames as alternate if the sensor provides it. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
The crop and compose rectangles are reset when s_fmt is called resulting in potentially valid rectangles being lost when updating the format. Fix this by mapping the rectangles inside the new format. Signed-off-by:
-
Niklas Söderlund authored
The variable to hold the video source information dimensions was poorly named 'source'. This is confusing as a lot of other members of structs share the same name with different purposes, rename it src_rect in preparation of refactoring code. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
The V4L2_FIELD_IS_INTERLACED() can be used to make the code more readable, use it. Signed-off-by:
-
Niklas Söderlund authored
While refactoring code the return statement became corrupted, fix it by returning the correct return code. Reported-by:
-
Ezequiel Garcia authored
Modify hantro_get_ref() and hantro_h264_get_ref_buf() helpers to return the buffer DMA address, this makes the code simpler and at the same time will allow easier enablement of the post-processing feature. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
-
Ezequiel Garcia authored
It seems all codecs are using a 16x16 size macroblock, and so it's possible to have just one set of macroblock macros. Signed-off-by:
-
Hans Verkuil authored
"struct struct" -> "struct" Signed-off-by:
-
Jernej Skrabec authored
Currently, if start streaming -> stop streaming -> start streaming sequence is executed, driver will end job prematurely, if ctx->translen is higher than 1, because "aborting" flag is still set from previous stop streaming command. Fix that by clearing "aborting" flag in start streaming handler. Fixes: 96d8eab5 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device") Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Vandana BN authored
When vbi stream is started, followed by video streaming, the vid_cap_streaming and vid_out_streaming were not being set to true, which would cause the video stream to stop when vbi stream is stopped. This patch allows to set vid_cap_streaming and vid_out_streaming to true. According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)' checks are a left-over from the original vivid development and should never have been there. Signed-off-by:
Vandana BN <bnvandana@gmail.com> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by:
-
Hans Verkuil authored
It should be "%u.%02u" instead of "%u.%u". Signed-off-by:
Bard Winther <bwinther@cisco.com> Signed-off-by:
-
Kefeng Wang authored
If v4l2_m2m_init() fails, m2m_dev pointer will be set ERR_PTR(-ENOMEM), then kfree m2m_dev will trigger BUG_ON, see below, fix it by setting m2m_dev to NULL. vim2m vim2m.0: Failed to init mem2mem device ------------[ cut here ]------------ kernel BUG at mm/slub.c:3944! invalid opcode: 0000 [#1] SMP PTI CPU: 11 PID: 9061 Comm: insmod Tainted: G E 5.2.0-rc2 #81 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:kfree+0x11a/0x160 Call Trace: vim2m_device_release+0x3f/0x50 [vim2m] device_release+0x27/0x80 kobject_release+0x68/0x190 vim2m_probe+0x20f/0x280 [vim2m] platform_drv_probe+0x37/0x90 really_probe+0xef/0x3d0 driver_probe_device+0x110/0x120 device_driver_attach+0x4f/0x60 __driver_attach+0x9a/0x140 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x76/0xc0 ? klist_add_tail+0x57/0x70 bus_add_driver+0x141/0x210 driver_register+0x5b/0xe0 vim2m_init+0x29/0x1000 [vim2m] do_one_initcall+0x46/0x1f4 ? __slab_alloc+0x1c/0x30 ? kmem_cache_alloc_trace+0x167/0x1b0 do_init_module+0x5b/0x21f load_module+0x1add/0x1fb0 ? __do_sys_finit_module+0xe9/0x110 __do_sys_finit_module+0xe9/0x110 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: ea6c7e34 ("media: vim2m: replace devm_kzalloc by kzalloc") Reported-by:
Hulk Robot <hulkci@huawei.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Alexandre Courbot authored
Check for a potentially NULL pointer that was overlooked and use shorter accessors to the same data. While we are at it, sprinkle a few comments. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
Each of the supported decoder formats used to set the same RPC interrupt handler by themselves, even though this could be done by the IF init function itself. Move it to the right place and stop making its symbol public. Signed-off-by:
-
Yunfei Dong authored
mtk_q_data::fmt is actually a pointer and must be dereferenced as such. This went under the radar because mtk_v4l2_debug() evaluates to nothing unless DEBUG is defined. [acourbot: split into its own commit] Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 767 bytes. Before: text data bss dec hex filename 41567 15088 192 56847 de0f em28xx/em28xx-dvb.o After: text data bss dec hex filename 39872 16016 192 56080 db10 em28xx/em28xx-dvb.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array 'registers' on the stack but instead make it static const. Makes the object code smaller by 45 bytes. Before: text data bss dec hex filename 17364 5000 0 22364 575c platform/s3c-camif/camif-regs.o After: text data bss dec hex filename 17255 5064 0 22319 572f platform/s3c-camif/camif-regs.o (gcc version 9.2.1, amd64) Signed-off-by:
-
Philipp Zabel authored
Since dec_ref_pic_marking_bit_size is not a syntax element itself, explicitly state that this is the size in bits of the dec_ref_pic_marking() syntax element contained in the slice. Signed-off-by:
-
Philipp Zabel authored
This adds a label to the error path to avoid calling v4l2_m2m_ctx_init() and kfree(ctx) in two places each. Signed-off-by:
-
Hans Verkuil authored
to synchronises -> to synchronise Signed-off-by:
-
Christophe JAILLET authored
At the beginning of the probe function, we have a call to 'request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")()' A corresponding 'release_region()' is performed in the remove function but is lacking in the error handling path. Add it. Fixes: b03c2fb9 ("media: add SECO cec driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Hans Verkuil authored
Initialize the context on open() with valid capture and output formats. It is good practice to always have valid formats internally. This solves one vb2 warning in the kernel log where the sizeimage value of the output format was 0 when requesting buffers, which is not allowed. It also simplifies the g_fmt ioctl implementations since they no longer have to check if a valid format was ever set. cedrus_prepare_format() now also validates sizeimage for the output formats, ensuring userspace can't set it to 0 since that would cause the same vb2 warning. Finally remove the sizeimage == 0 check in cedrus_try_fmt_vid_out() since cedrus_prepare_format() will now adjust this value. Signed-off-by:
-
Hans Verkuil authored
If an unsupported pixelformat is passed to try_fmt, then pick the first valid pixelformat instead. This is more standard V4L2 behavior. Signed-off-by:
-
Hans Verkuil authored
Fixes this compliance warning: $ v4l2-compliance -m0 v4l2-compliance SHA: b514d615166bdc0901a4c71261b87db31e89f464, 32 bits Compliance test for cedrus device /dev/media0: Media Driver Info: Driver name : cedrus Model : cedrus Serial : Bus info : Media version : 5.3.0 Hardware revision: 0x00000000 (0) Driver version : 5.3.0 Required ioctls: warn: v4l2-test-media.cpp(51): empty bus_info test MEDIA_IOC_DEVICE_INFO: OK Signed-off-by: -
Benoit Parrot authored
Switch to SPDX licensing and drop the redundant GPL text. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Acked-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Benoit Parrot authored
The bus related static data included in the vpfe_fmt static table can be derived dynamically instead. This simplify the table and it's use. We instead replace the per bus data info with just the usual bit per pixel value for each supported pixel format. Signed-off-by:
-
Benoit Parrot authored
The try_fmt was not actually trying out the provided format but merely returning the current format basically like get_fmt. In addition set_fmt should first invoked try_fmt to validate the given format before applying it to the hardware. To fix all of these the whole get/try/set ioctl functions had to be reworked. When calculating the bytesperline/stride and sizeimage format member we don't need to locally store the current value of bytesperpixel as it can easily get derived dynamically. Signed-off-by:
-
Benoit Parrot authored
checkpatch.pl nows reports several: WARNING: Prefer using '"%s...", __func__' to using '<function name>', this function's name, in a string. So fix these for the whole driver. At the same time remove the function entry trace log as those can be enabled using ftrace instead. Signed-off-by:
-
Benoit Parrot authored
Using a statically defined format array would cause issue when multiple vpfe instance would be connected to sub-device of different capabilities. We need to use an instance based array instead to properly maintain a per port/instance format list. Signed-off-by:
-
Benoit Parrot authored
VIDIOC_S_STD should not return an error if the value is identical to the current one. This error was highlighted by the v4l2-compliance test. Signed-off-by:
-
Benoit Parrot authored
Returning queued vb2 buffers back to user space is a common task best handled by a helper function. Signed-off-by:
-
Benoit Parrot authored
When start_streaming fails the h/w module might be left enabled inadvertently. Make sure it is disabled in the error path. Signed-off-by:
-
Benoit Parrot authored
We were originally attempting to stop all processing as soon as possible, but the in-progress DMA operation cannot be canceled. This led to the module being in a busy state and prevented proper power management functionality. The existing implementation would attempt to clean things up by waiting up to 50ms. However when receiving video frame at 15fps or lower, it meant an inter frame arrival rate of 66.6 ms or higher. In such cases upon tear down the following message could be seen: omap_hwmod: vpfe0: _wait_target_disable failed This patch fixes this issue by adding a stopping state where we would wait for the next Vsync before disabling the hardware. Signed-off-by:
-
