The l2tp subsystem now uses standard kernel logging APIs for
informational and warning messages, and tracepoints for debug
information.

Now that the tunnel and session debug flags are unused, remove the field
from the core structures.

Various system calls (in the case of l2tp_ppp) and netlink messages
handle the getting and setting of debug flags.  To avoid userspace
breakage don't modify the API of these calls; simply ignore set
requests, and send dummy data for get requests.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All l2tp's informational and warning logging is now carried out using
standard kernel APIs.

Debugging information is now handled using tracepoints.

Now that no code is using the custom logging macros, remove them from
l2tp_core.h.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add lifetime event tracing for tunnel and session instances, tracking
tunnel and session registration, deletion, and eventual freeing.

Port the data path sequence number debug logging to use trace points
rather than custom debug macros.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp can provide a better debug experience using tracepoints rather than
printk-style logging.

Add tracepoint definitions in trace.h for use in the l2tp subsystem
code.

Add preprocessor definitions for the length of session and tunnel names
in l2tp_core.h so we can reuse these in trace.h.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The l2tp subsystem doesn't currently make use of tracepoints.

As a starting point for adding tracepoints, add skeleton infrastructure
for defining tracepoints for the subsystem, and for having them build
appropriately whether compiled into the kernel or built as a module.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The l2tp_* log wrappers only emit messages of a given category if the
tunnel or session structure has the appropriate flag set in its debug
field.  Flags default to being unset.

For warning messages, this doesn't make a lot of sense since an
administrator is likely to want to know about datapath warnings without
needing to tweak the debug flags setting for a given tunnel or session
instance.

Modify l2tp_warn callsites to use pr_warn_ratelimited instead for
unconditional output of warning messages.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_ppp in particular had a lot of log messages for tracing
[get|set]sockopt calls.  These aren't especially useful, so remove
these messages.

Several log messages flagging error conditions were logged using
l2tp_info: they're better off as l2tp_warn.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp had logging to trace data frame receipt and transmission, including
code to dump packet contents.  This was originally intended to aid
debugging of core l2tp packet handling, but is of limited use now that
code is stable.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vinay Kumar Yadav says:

====================
crypto/chelsio: Restructure chelsio's inline crypto drivers

This series of patches will move chelsio's inline crypto
drivers (ipsec and chtls) from "drivers/crypto/chelsio/"
to "drivers/net/ethernet/chelsio/inline_crypto/"
for better maintenance.

Patch1: moves out chtls.
Patch2: moves out inline ipsec, applies on top of Patch1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch seperates inline ipsec functionality from coprocessor
driver chcr. Now inline ipsec is separate ULD, moved from
"drivers/crypto/chelsio/" to "drivers/net/ethernet/chelsio/inline_crypto/ch_ipsec/"
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

chelsio inline tls driver(chtls) is mostly overlaps with NIC drivers
but currenty it is part of crypto driver, so move it out to appropriate
directory for better maintenance.
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set IP protocol mask only when IP protocol field is set.
This will allow flow-type ether with vlan rule which don't have
protocol field to apply.

ethtool -N ens5f4 flow-type ether proto 0x8100 vlan 0x600\
m 0x1FFF action 3 loc 16
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

In st21nfca_connectivity_event_received(), the return value of
devm_kzalloc() is unnecessarily cast from void*. Remove cast.

Issue identified with Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In st_nci_hci_connectivity_event_received(), the return value of
devm_kzalloc() is unnecessarily cast from void*. Remove cast.

Issue identified with Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In qed_rdma_destroy_cq() the result of dma_alloc_coherent() is cast from
void* unnecessarily. Remove cast.

Issue identified with Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp_mmap: optmizations

This series updates tcp_mmap reference tool to use best pratices.

First patch is using madvise(MADV_DONTNEED) to decrease pressure
on the socket lock.

Last patches try to use huge pages when available.
====================
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One down side of using TCP rx zerocopy is one extra TLB miss
per page after the mapping operation.

While if the application is using hugepages, the non zerocopy
recvmsg() will not have to pay these TLB costs.

This patch allows server side to use huge pages for
the non zero copy case, to allow fair comparisons when
both solutions use optimal conditions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are significant gains using huge pages when
available, as shown in [1].

This patch adds mmap_large_buffer() and uses it
in client side (tx path of this reference tool)

Following patch will use the feature for server side.

[1] https://patchwork.ozlabs.org/project/netdev/patch/20200820154359.1806305-1-edumazet@google.com/Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When TCP_ZEROCOPY_RECEIVE operation has been added,
I made the mistake of automatically un-mapping prior
content before mapping new pages.

This has the unfortunate effect of adding potentially long
MMU operations (like TLB flushes) while socket lock is held.

Using madvise(MADV_DONTNEED) right after pages has been used
has two benefits :

1) This releases pages sooner, allowing pages to be recycled
if they were part of a page pool in a NIC driver.

2) No more long unmap operations while preventing immediate
processing of incoming packets.

The cost of the added system call is small enough.

Arjun will submit a kernel patch allowing to opt out from
the unmap attempt in tcp_zerocopy_receive()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, tcp sendmsg(MSG_ZEROCOPY) is building skbs with order-0 fragments.
Compared to standard sendmsg(), these skbs usually contain up to 16 fragments
on arches with 4KB page sizes, instead of two.

This adds considerable costs on various ndo_start_xmit() handlers,
especially when IOMMU is in the picture.

As high performance applications are often using huge pages,
we can try to combine adjacent pages belonging to same
compound page.

Tested on AMD Rome platform, with IOMMU, nominal single TCP flow speed
is roughly doubled (~55Gbit -> ~100Gbit), when user application
is using hugepages.

For reference, nominal single TCP flow speed on this platform
without MSG_ZEROCOPY is ~65Gbit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
nfp: flower: add support for QinQ matching

Louis says:

Add new feature to the Netronome flower driver to enable QinQ offload.
This needed a bit of gymnastics in order to not break compatibility with
older firmware as the flow key sent to the firmware had to be updated
in order to make space for the extra field.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When both the driver and the firmware supports QinQ the flow key
structure that is send to the firmware is updated as the old
method of matching on VLAN did not allow for space to add another
VLAN tag. VLAN flows can now also match on the tpid field, not
constrained to just 0x8100 as before.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a check to make sure the total length of the flow key sent to the
firmware stays within the supported limit.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 filters can occupy up to 4 slots and will exhaust HPFILTER
region much sooner. So, continue searching for free slots in the
HASH or NORMAL filter regions, as long as the rule's priority does
not conflict with existing rules in those regions.
Signed-off-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kurt Kanzenbach says:

====================
ptp: Add generic helper functions

in order to reduce code duplication (and cut'n'paste errors) in the ptp code of
DSA, Ethernet and Phy drivers, create helper functions and move them to
ptp_classify. This way all drivers can share the same implementation.

This is version four and contains bugfixes. Implemented as discussed [1] [2]
[3] [4].

Previous versions can be found here:

 * https://lkml.kernel.org/netdev/20200723074946.14253-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200727090601.6500-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200730080048.32553-1-kurt@linutronix.de/

Thanks,
Kurt

Changes sinve v3:

 * Coding style issues (Richard Cochran, Petr Machata)
 * Add better documentation (Grygorii Strashko)
 * Fix cpts code (Grygorii Strashko)
 * Use ntohs() for TI code (Grygorii Strashko)
 * Add tags

Changes since v2:

 * Make ptp_parse_header() work in all scenarios (Russell King)
 * Fix msgtype offset for ptp v1 packets

Changes since v1:

 * Fix Kconfig (Richard Cochran)
 * Include more drivers (Richard Cochran)

[1] - https://lkml.kernel.org/netdev/20200713140112.GB27934@hoboy/
[2] - https://lkml.kernel.org/netdev/20200720142146.GB16001@hoboy/
[3] - https://lkml.kernel.org/netdev/20200723074946.14253-1-kurt@linutronix.de/
[4] - https://lkml.kernel.org/netdev/20200729100257.GX1551@shell.armlinux.org.uk/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The offset for the control field is not needed anymore. Remove it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to reduce code duplication between ptp drivers, generic helper
functions were introduced. Use them.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to reduce code duplication between ptp drivers, generic helper
functions were introduced. Use them.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to reduce code duplication between ptp drivers, generic helper
functions were introduced. Use them.
Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to reduce code duplication between ptp drivers, generic helper
functions were introduced. Use them.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to reduce code duplication between ptp drivers, generic helper
functions were introduced. Use them.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-and-tested-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to reduce code duplication between ptp drivers, generic helper
functions were introduced. Use them.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The message type is located at different offsets within the ptp header depending
on the ptp version (v1 or v2). Therefore, drivers which also deal with ptp v1
have some code for it.

Extract this into a helper function for drivers to be used.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reason: A lot of the ptp drivers - which implement hardware time stamping - need
specific fields such as the sequence id from the ptp v2 header. Currently all
drivers implement that themselves.

Introduce a generic function to retrieve a pointer to the start of the ptp v2
header.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the driver reads RX and TX subCRQ handle array directly from
a DMA-mapped buffer address when it needs to make a H_SEND_SUBCRQ
hcall. This patch stores that information in the ibmvnic_sub_crq_queue
structure instead of reading from the buffer received at login. The
overall goal of this patch is to parse relevant information from the
login response buffer and store it in the driver's private data
structures so that we don't need to read directly from the buffer and
can then free up that memory.
Signed-off-by: Cristobal Forno <cforno12@linux.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: use napi_complete_done return value

Consider the return value of napi_complete_done(), this allows users to
use the gro_flush_timeout sysfs attribute as an alternative to classic
interrupt coalescing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

After making use of the gro_flush_timeout attribute I once got a
tx timeout due to an interrupt that wasn't handled. Seems using
irq_enabled can be racy, and it's not needed any longer anyway,
so remove it. I've never seen a report about such a race before,
therefore treat the change as an improvement.

There's just one small drawback: If a legacy PCI interrupt is used,
and if this interrupt is shared with a device with high interrupt
rate, then we may handle interrupts even if NAPI disabled them,
and we may see a certain performance decrease under high network load.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Consider the return value of napi_complete_done(), this allows users to
use the gro_flush_timeout sysfs attribute as an alternative to classic
interrupt coalescing.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kernel documentation of L2TP has not been kept up to date and lacks
coverage of some L2TP APIs. While addressing this, refactor to improve
readability, separating the parts which focus on user APIs and
internal implementation into sections.

Changes in v2:

 - fix checkpatch warnings about trailing whitespace and long lines
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>