- 20 Jan, 2021 10 commits
-
-
Nicholas Kazlauskas authored
[Why] We need hardware reset before hardware init for backdoor loading when we're reusing the framebuffer memory. [How] This doesn't run if the hardware isn't already in reset from software perspective. The reset function has register level checks so just remove the software one here. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
Anson Jacob <anson.jacob@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Stylon Wang authored
[Why] Since Linux 5.9.0, DRM has provided vrr_range debugfs for all connectors. Reporting Freesync capability to vrr_range debugfs entry registered in Linux DM no longer works. [How] Report min/max vertical frequency to vrr_range debugfs entrry created by DRM connectors. Remove vrr_range debugfs entry from Linux DM. Tested-by:
Stylon Wang <stylon.wang@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why & How] These can differ per ASIC or not be present. Don't call the dcn20 ones directly but rather the ones defined by the ASIC init table. Tested-by:
-
Sung Lee authored
[WHY] Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe. [HOW] If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead. Tested-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Mike Hsieh authored
[Why] FEC over eDP support is incomplete. [How] Disable FEC over eDP. Tested-by:
Mike Hsieh <chun-wei.hsieh@amd.com> Reviewed-by:
Nikola Cornij <Nikola.Cornij@amd.com> Acked-by:
-
Vladimir Stempen authored
[why] Heavy corruption or blank screen reported on wake, with 6k display connected and FEC enabled [how] When Disable/Enable stream for display pipes on HPDRX, DC should take into account ODM split pipes. Tested-by:
Vladimir Stempen <vladimir.stempen@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Jingwen Chen authored
When using cancel_delayed_work_sync, there's no need to flush_delayed_work first. This sequence can lead to a redundant loop of work executing. Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by:
Monk Liu <monk.liu@amd.com> Signed-off-by:
-
Kevin Wang authored
the SpareX is reserved by SMU firmware, the driver is never use it. Signed-off-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Daniel Vetter authored
Merge tag 'amd-drm-next-5.12-2021-01-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.12-2021-01-20: amdgpu: - Fix non-x86 build - W=1 fixes from Lee Jones - Enable GPU reset on Navy Flounder - Kernel doc fixes - SMU workload profile fixes for APUs - Display updates - SR-IOV fixes - Vangogh SMU feature enablment and bug fixes - GPU reset support for Vangogh - Misc cleanups Conflicts: drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c Resolve the conflict by picking the initialization value from amd from f03e80d2 ("drm/amd/display: Initialize stack variable") over the one Linus picked in 61d79136 ("drm/amd/display: avoid uninitialized variable warning"). It shouldn't matter. From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210120060951.22600-1-alexander.deucher@amd.comSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v5.12: UAPI Changes: - Fix fourcc macro for amlogic video fbc. Cross-subsystem Changes: - Export pci_rebar_bytes_to_size. - Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size. - Convert devicetree bindings to use the OF graph schema. - Update s6e63m0 bindings. - Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of module conflicts. - Add Zack Rusin as vmwgfx maintainer. - Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching. Core Changes: - Remove references to drm_device.pdev - Fix regression in ttm_bo_move_to_lru_tail(). - Assorted docbook updates. - Do not send dp-mst hotplug events on error when probing. - Move some agp macros to agpsupport.c, so it's not always compiled. - Move drm_need_swiotlb.h to drm_cache.c - Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy. - Nuke drm_device.hose - Warn when the ttm resource manager is non-empty when disabling. - Assorted small fixes. Driver Changes: - Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx. - Move hisilicon to use simple encode. - Add writeback connector to vkms. - Add support for BT2020 to DE3. - Use gem prime mmap helpers in vc4, and move the mmap function upwards. - Use managed drm device, and cleanup error paths and display registers in vmwgfx. - Use correct bus_format and connector_type for innolux_n116bge. - Fix a lot of warnings with W=1 (Lee Jones) Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5c3ad775-48ce-33ee-e4c6-a5e1e540f845@linux.intel.com
-
- 19 Jan, 2021 5 commits
-
-
Huang Rui authored
This patch is to fix below build error while we are using the kconfig without x86. drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function 'vangogh_get_smu_metrics_data': drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:300:10: error: 'boot_cpu_data' undeclared (first use in this function); did you mean 'boot_cpuid'? 300 | boot_cpu_data.x86_max_cores * sizeof(uint16_t)); | ^~~~~~~~~~~~~ | boot_cpuid drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function 'vangogh_read_sensor': drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1320:11: error: 'boot_cpu_data' undeclared (first use in this function); did you mean 'boot_cpuid'? 1320 | *size = boot_cpu_data.x86_max_cores * sizeof(uint16_t); | ^~~~~~~~~~~~~ | boot_cpuid drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function 'vangogh_od_edit_dpm_table': drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1460:19: error: 'boot_cpu_data' undeclared (first use in this function); did you mean 'boot_cpuid'? 1460 | if (input[0] >= boot_cpu_data.x86_max_cores) { | ^~~~~~~~~~~~~ | boot_cpuid v2: fix #ifdef and add comment for APU only Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Maarten Lankhorst authored
Commit 8f66090b ("drm/amdgpu: Remove references to struct drm_device.pdev") accidentally adds an initialization of adev, which isn't used anywhere. This caused a compiler warning on the unused variable, remove it. Fixes: 8f66090b ("drm/amdgpu: Remove references to struct drm_device.pdev") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de>
-
Andrey Grodzovsky authored
To avoid any possible use after free. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/414814/ CC: stable@vger.kernel.org Signed-off-by:
-
Andrey Grodzovsky authored
Invalidate all BOs CPU mappings once device is removed. v3: Move the code from TTM into drm_dev_unplug Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/414809/Signed-off-by:
-
Thomas Zimmermann authored
We have DRM drivers based on USB, SPI and platform devices. All of them are fine with storing their device reference in struct drm_device.dev. PCI devices should be no exception. Therefore struct drm_device.pdev is deprecated. Instead upcast from struct drm_device.dev with to_pci_dev(). PCI-specific code can use dev_is_pci() to test for a PCI device. This patch changes the DRM core code and documentation accordingly. v4: * split-off pdev deprecation into separate patch Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Tested-by:
Andy Lavr <andy.lavr@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118131420.15874-2-tzimmermann@suse.de
-
- 18 Jan, 2021 25 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/drm_agpsupport.c:61: warning: Function parameter or member 'dev' not described in 'drm_agp_info' drivers/gpu/drm/drm_agpsupport.c:61: warning: Function parameter or member 'info' not described in 'drm_agp_info' drivers/gpu/drm/drm_agpsupport.c:105: warning: Function parameter or member 'dev' not described in 'drm_agp_acquire' drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'dev' not described in 'drm_agp_acquire_ioctl' drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'data' not described in 'drm_agp_acquire_ioctl' drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'file_priv' not described in 'drm_agp_acquire_ioctl' drivers/gpu/drm/drm_agpsupport.c:145: warning: Function parameter or member 'dev' not described in 'drm_agp_release' drivers/gpu/drm/drm_agpsupport.c:171: warning: Function parameter or member 'dev' not described in 'drm_agp_enable' drivers/gpu/drm/drm_agpsupport.c:171: warning: Function parameter or member 'mode' not described in 'drm_agp_enable' drivers/gpu/drm/drm_agpsupport.c:203: warning: Function parameter or member 'dev' not described in 'drm_agp_alloc' drivers/gpu/drm/drm_agpsupport.c:203: warning: Function parameter or member 'request' not described in 'drm_agp_alloc' drivers/gpu/drm/drm_agpsupport.c:256: warning: Function parameter or member 'dev' not described in 'drm_agp_lookup_entry' drivers/gpu/drm/drm_agpsupport.c:256: warning: Function parameter or member 'handle' not described in 'drm_agp_lookup_entry' drivers/gpu/drm/drm_agpsupport.c:279: warning: Function parameter or member 'dev' not described in 'drm_agp_unbind' drivers/gpu/drm/drm_agpsupport.c:279: warning: Function parameter or member 'request' not described in 'drm_agp_unbind' drivers/gpu/drm/drm_agpsupport.c:318: warning: Function parameter or member 'dev' not described in 'drm_agp_bind' drivers/gpu/drm/drm_agpsupport.c:318: warning: Function parameter or member 'request' not described in 'drm_agp_bind' drivers/gpu/drm/drm_agpsupport.c:363: warning: Function parameter or member 'dev' not described in 'drm_agp_free' drivers/gpu/drm/drm_agpsupport.c:363: warning: Function parameter or member 'request' not described in 'drm_agp_free' drivers/gpu/drm/drm_agpsupport.c:404: warning: Function parameter or member 'dev' not described in 'drm_agp_init' Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Faith <faith@valinux.com> Cc: Gareth Hughes <gareth@valinux.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/mdfld_intel_display.c:103: warning: Function parameter or member 'dev' not described in 'psb_intel_panel_fitter_pipe' drivers/gpu/drm/gma500/mdfld_intel_display.c:273: warning: Function parameter or member 'crtc' not described in 'mdfld_crtc_dpms' drivers/gpu/drm/gma500/mdfld_intel_display.c:273: warning: Function parameter or member 'mode' not described in 'mdfld_crtc_dpms' drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'crtc' not described in 'mdfldFindBestPLL' drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'target' not described in 'mdfldFindBestPLL' drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'refclk' not described in 'mdfldFindBestPLL' drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'best_clock' not described in 'mdfldFindBestPLL' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'dev' not described in 'mdfld_dsi_gen_fifo_ready' drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'gen_fifo_stat_reg' not described in 'mdfld_dsi_gen_fifo_ready' drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'fifo_stat' not described in 'mdfld_dsi_gen_fifo_ready' drivers/gpu/drm/gma500/mdfld_dsi_output.c:95: warning: Function parameter or member 'dsi_config' not described in 'mdfld_dsi_brightness_init' drivers/gpu/drm/gma500/mdfld_dsi_output.c:95: warning: Function parameter or member 'pipe' not described in 'mdfld_dsi_brightness_init' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: jim liu <jim.liu@intel.com> Cc: Jackie Li <yaodong.li@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'limit' not described in 'mrst_lvds_find_best_pll' drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'crtc' not described in 'mrst_lvds_find_best_pll' drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'target' not described in 'mrst_lvds_find_best_pll' drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'refclk' not described in 'mrst_lvds_find_best_pll' drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'best_clock' not described in 'mrst_lvds_find_best_pll' drivers/gpu/drm/gma500/oaktrail_crtc.c:215: warning: Function parameter or member 'crtc' not described in 'oaktrail_crtc_dpms' drivers/gpu/drm/gma500/oaktrail_crtc.c:215: warning: Function parameter or member 'mode' not described in 'oaktrail_crtc_dpms' drivers/gpu/drm/gma500/oaktrail_crtc.c:345: warning: Function parameter or member 'dev' not described in 'oaktrail_panel_fitter_pipe' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'dev' not described in 'oaktrail_lvds_set_power' drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'gma_encoder' not described in 'oaktrail_lvds_set_power' drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'on' not described in 'oaktrail_lvds_set_power' drivers/gpu/drm/gma500/oaktrail_lvds.c:291: warning: Function parameter or member 'mode_dev' not described in 'oaktrail_lvds_init' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c: In function ‘get_clock’: drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c:69:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c: In function ‘get_data’: drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c:83:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jan Safrata <jan.nikitenko@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/cdv_intel_dp.c:315: warning: Function parameter or member 'encoder' not described in 'is_edp' drivers/gpu/drm/gma500/cdv_intel_dp.c:315: warning: Excess function parameter 'intel_dp' description in 'is_edp' drivers/gpu/drm/gma500/cdv_intel_dp.c:1698: warning: Function parameter or member 'connector' not described in 'cdv_intel_dp_detect' drivers/gpu/drm/gma500/cdv_intel_dp.c:1698: warning: Function parameter or member 'force' not described in 'cdv_intel_dp_detect' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Keith Packard <keithp@keithp.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/cdv_intel_lvds.c:83: warning: Function parameter or member 'dev' not described in 'cdv_intel_lvds_set_backlight' drivers/gpu/drm/gma500/cdv_intel_lvds.c:83: warning: Function parameter or member 'level' not described in 'cdv_intel_lvds_set_backlight' drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'dev' not described in 'cdv_intel_lvds_set_power' drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'encoder' not described in 'cdv_intel_lvds_set_power' drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'on' not described in 'cdv_intel_lvds_set_power' drivers/gpu/drm/gma500/cdv_intel_lvds.c:298: warning: Function parameter or member 'connector' not described in 'cdv_intel_lvds_get_modes' drivers/gpu/drm/gma500/cdv_intel_lvds.c:480: warning: Function parameter or member 'mode_dev' not described in 'cdv_intel_lvds_init' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/cdv_intel_display.c:559: warning: Function parameter or member 'dev' not described in 'cdv_intel_panel_fitter_pipe' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/cdv_intel_crt.c:138: warning: Function parameter or member 'connector' not described in 'cdv_intel_crt_detect_hotplug' drivers/gpu/drm/gma500/cdv_intel_crt.c:138: warning: Function parameter or member 'force' not described in 'cdv_intel_crt_detect_hotplug' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/drm_dp_helper.c:965: warning: Function parameter or member 'color_spc' not described in 'drm_dp_downstream_rgb_to_ycbcr_conversion' drivers/gpu/drm/drm_dp_helper.c:965: warning: Excess function parameter 'colorspc' description in 'drm_dp_downstream_rgb_to_ycbcr_conversion' drivers/gpu/drm/drm_dp_helper.c:2678: warning: Function parameter or member 'enable_frl_ready_hpd' not described in 'drm_dp_pcon_frl_prepare' Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/psb_irq.c:134: warning: Function parameter or member 'dev' not described in 'mid_pipe_event_handler' drivers/gpu/drm/gma500/psb_irq.c:134: warning: Function parameter or member 'pipe' not described in 'mid_pipe_event_handler' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/psb_intel_sdvo.c:230: warning: Function parameter or member 'psb_intel_sdvo' not described in 'psb_intel_sdvo_write_sdvox' drivers/gpu/drm/gma500/psb_intel_sdvo.c:230: warning: Function parameter or member 'val' not described in 'psb_intel_sdvo_write_sdvox' drivers/gpu/drm/gma500/psb_intel_sdvo.c:598: warning: Function parameter or member 'psb_intel_sdvo' not described in 'psb_intel_sdvo_get_trained_inputs' drivers/gpu/drm/gma500/psb_intel_sdvo.c:598: warning: Function parameter or member 'input_1' not described in 'psb_intel_sdvo_get_trained_inputs' drivers/gpu/drm/gma500/psb_intel_sdvo.c:598: warning: Function parameter or member 'input_2' not described in 'psb_intel_sdvo_get_trained_inputs' drivers/gpu/drm/gma500/psb_intel_sdvo.c:1831: warning: Function parameter or member 'dev_priv' not described in 'psb_intel_sdvo_select_ddc_bus' drivers/gpu/drm/gma500/psb_intel_sdvo.c:1831: warning: Function parameter or member 'sdvo' not described in 'psb_intel_sdvo_select_ddc_bus' drivers/gpu/drm/gma500/psb_intel_sdvo.c:1831: warning: Function parameter or member 'reg' not described in 'psb_intel_sdvo_select_ddc_bus' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/mmu.c: In function ‘psb_mmu_insert_pfn_sequence’: drivers/gpu/drm/gma500/mmu.c:651:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/power.c:190: warning: Excess function parameter 'state' description in 'gma_power_suspend' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Benjamin Defnet <benjamin.r.defnet@intel.com> Cc: Rajesh Poornachandran <rajesh.poornachandran@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/mmu.c:420:10: warning: no previous prototype for ‘psb_get_default_pd_addr’ [-Wmissing-prototypes] Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/gem.c:59:5: warning: no previous prototype for ‘psb_gem_create’ [-Wmissing-prototypes] Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/gem.h:13:57: warning: ‘struct drm_device’ declared inside parameter list will not be visible outside of this definition or declaration Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/psb_intel_modes.c:17: warning: Function parameter or member 'adapter' not described in 'psb_intel_ddc_probe' drivers/gpu/drm/gma500/psb_intel_modes.c:51: warning: Function parameter or member 'adapter' not described in 'psb_intel_ddc_get_modes' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/psb_intel_lvds.c:635: warning: Function parameter or member 'mode_dev' not described in 'psb_intel_lvds_init' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/psb_intel_display.c:79: warning: Function parameter or member 'dev' not described in 'psb_intel_panel_fitter_pipe' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/gma_device.c:10:6: warning: no previous prototype for ‘gma_get_core_freq’ [-Wmissing-prototypes] Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/gma_display.c:27: warning: Function parameter or member 'crtc' not described in 'gma_pipe_has_type' drivers/gpu/drm/gma500/gma_display.c:27: warning: Function parameter or member 'type' not described in 'gma_pipe_has_type' drivers/gpu/drm/gma500/gma_display.c:190: warning: Function parameter or member 'crtc' not described in 'gma_crtc_dpms' drivers/gpu/drm/gma500/gma_display.c:190: warning: Function parameter or member 'mode' not described in 'gma_crtc_dpms' drivers/gpu/drm/gma500/gma_display.c:573: warning: Function parameter or member 'crtc' not described in 'gma_crtc_save' drivers/gpu/drm/gma500/gma_display.c:616: warning: Function parameter or member 'crtc' not described in 'gma_crtc_restore' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/power.c:101: warning: Function parameter or member 'pdev' not described in 'gma_resume_display' drivers/gpu/drm/gma500/power.c:155: warning: Function parameter or member 'pdev' not described in 'gma_resume_pci' drivers/gpu/drm/gma500/power.c:155: warning: Excess function parameter 'dev' description in 'gma_resume_pci' drivers/gpu/drm/gma500/power.c:189: warning: Function parameter or member '_dev' not described in 'gma_power_suspend' drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'pdev' description in 'gma_power_suspend' drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'state' description in 'gma_power_suspend' drivers/gpu/drm/gma500/power.c:216: warning: Function parameter or member '_dev' not described in 'gma_power_resume' drivers/gpu/drm/gma500/power.c:216: warning: Excess function parameter 'pdev' description in 'gma_power_resume' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Benjamin Defnet <benjamin.r.defnet@intel.com> Cc: Rajesh Poornachandran <rajesh.poornachandran@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/mmu.c:316:20: warning: no previous prototype for ‘psb_mmu_pt_alloc_map_lock’ [-Wmissing-prototypes] Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
