The commit shipped with two bugs:
 fl4->fl4_icmp_type = flkeys->icmp.type;
 fl4->fl4_icmp_type = flkeys->icmp.code;
               ~~~~ should have been "code".

But the more severe bug is that I got fooled by flowi member defines:
fl4_icmp_type, fl4_gre_key and fl4_dport share the same union/address.

Fix typo and make gre/icmp key setting depend on the l4 protocol.

Fixes: 7a020709 ("xfrm: policy: replace session decode with flow dissector")
Reported-and-tested-by: Antony Antony <antony@phenome.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

A recent patch changed xfrm6_udp_encap_rcv to not
free the skb itself anymore but fogot the case
where xfrm4_udp_encap_rcv is called subsequently.

Fix this by moving the call to xfrm4_udp_encap_rcv
from __xfrm6_udp_encap_rcv to xfrm6_udp_encap_rcv.

Fixes: 221ddb72 ("xfrm: Support GRO for IPv6 ESP in UDP encapsulation")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Florian Westphal says:

============
Remove the ipv4+ipv6 session decode functions and use generic flow
dissector to populate the flowi for the policy lookup.

Changes since v2:
- first patch broke CONFIG_XFRM=n builds

Changes since v1:
- Can't use skb_flow_dissect(), we might see skbs that have neither
  skb->sk nor skb->dev set. Flow dissector WARN()s in this case, it
  tries to check for a bpf program assigned in that net namespace.

Add a preparation patch to pass down 'struct net' in
xfrm_decode_session so its available for use in patch 3.

Changes since RFC:

- Drop mobility header support.  I don't think that anyone uses
  this.  MOBIKE doesn't appear to need this either.
- Drop fl6->flowlabel assignment, original code leaves it as 0.

There is no reason for this change other than to remove code.
============
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm needs to populate ipv4/v6 flow struct for route lookup.
In the past there were several bugs in this code:

1. callers that forget to reload header pointers after
   xfrm_decode_session() (it may pull headers).
2. bugs in decoding where accesses past skb->data occurred.

Meanwhile network core gained a packet dissector as well.
This switches xfrm to the flow dissector.

Changes since RFC:
Drop ipv6 mobiliy header support, AFAIU noone uses this.

Drop extraction of flowlabel, replaced code doesn't set it either.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/netdev/20230908120628.26164-3-fw@strlen.de/Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

flowi4_oif/flowi6_oif and mark are aliased to flowi_common field, i.e.
all can be used interchangeably.

Instead of duplicating place this in common code.
No functional changes intended.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Preparation patch, extra arg is not used.
No functional changes intended.

This is needed to replace the xfrm session decode functions with
the flow dissector.

skb_flow_dissect() cannot be used as-is, because it attempts to deduce the
'struct net' to use for bpf program fetch from skb->sk or skb->dev, but
xfrm code path can see skbs that have neither sk or dev filled in.

So either flow dissector needs to try harder, e.g. by also trying
skb->dst->dev, or we have to pass the struct net explicitly.

Passing the struct net doesn't look too bad to me, most places
already have it available or can derive it from the output device.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/netdev/202309271628.27fd2187-oliver.sang@intel.com/Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Antony Antony says:

============
I have added how to enable this feature, and more description to the second
patch. Here is copy of that.

xfrm: Support GRO for IPv4i & IPv6 ESP in UDP encapsulation

This patchset enables the GRO codepath for ESP in UDP encapsulated
packets. Decapsulation happens at L2 and saves a full round through
the stack for each packet. This is also needed to support HW offload
for ESP in UDP encapsulation.

Enabling this would imporove performance for ESP in UDP datapath, i.e
IPsec with NAT in between. Our initial tests show 20% improvement.

By default GRP for ESP-in-UDP is disabled for UDP sockets.
To enable this feature for an ESP socket, the following two options
need to be set:
1. enable ESP-in-UDP: (this is already set by an IKE daemon).
   int type = UDP_ENCAP_ESPINUDP;
   setsockopt(fd, SOL_UDP, UDP_ENCAP, &type, sizeof(type));

2. To enable GRO for ESP in UDP socket:
   type = true;
   setsockopt(fd, SOL_UDP, UDP_GRO, &type, sizeof(type));

Enabling ESP-in-UDP has the side effect of preventing the Linux stack from
seeing ESP packets at the L3 (when ESP OFFLOAD is disabled), as packets are
immediately decapsulated from UDP and decrypted.
This change may affect nftable rules that match on ESP packets  at L3.
Also tcpdump won't see the ESP packet.

Developers/admins are advised to review and adapt any nftable rules
accordingly before enabling this feature to prevent potential rule breakage.
Also tcpdump will not see from ESP packets from a ESP in UDP flow when this
is enabled.

Initial, a quick test showed performance difference of about 20%
impromvent on the receiver, when using iperf, tcp flow, over ESP in UDP.
============
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

This patch enables the GRO codepath for IPv6 ESP in UDP encapsulated
packets. Decapsulation happens at L2 and saves a full round through
the stack for each packet. This is also needed to support HW offload
for ESP in UDP encapsulation.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>

This patch enables the GRO codepath for IPv4 ESP in UDP encapsulated
packets. Decapsulation happens at L2 and saves a full round through
the stack for each packet. This is also needed to support HW offload
for ESP in UDP encapsulation.

Enabling this would imporove performance for ESP in UDP datapath, i.e
IPsec with NAT in between.

By default GRP for ESP-in-UDP is disabled for UDP sockets.
To enable this feature for an ESP socket, the following two options
need to be set:
1. enable ESP-in-UDP: (this is already set by an IKE daemon).
   int type = UDP_ENCAP_ESPINUDP;
   setsockopt(fd, SOL_UDP, UDP_ENCAP, &type, sizeof(type));

2. To enable GRO for ESP in UDP socket:
   type = true;
   setsockopt(fd, SOL_UDP, UDP_GRO, &type, sizeof(type));

Enabling ESP-in-UDP has the side effect of preventing the Linux stack from
seeing ESP packets at the L3 (when ESP OFFLOAD is disabled), as packets are
immediately decapsulated from UDP and decrypted.
This change may affect nftable rules that match on ESP packets at L3.
Also tcpdump won't see the ESP packet.

Developers/admins are advised to review and adapt any nftable rules
accordingly before enabling this feature to prevent potential rule breakage.
Also tcpdump will not see from ESP packets from a ESP in UDP flow, when this
is enabled.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>

This is needed to support GRO for ESP in UDP encapsulation.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct xfrm_sec_ctx.

Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

commit a269fbfc ("xfrm: state: remove extract_input indirection from xfrm_state_afinfo")
left behind this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Shannon Nelson says:

====================
ionic: better Tx SG handling

The primary patch here is to be sure we're not hitting linearize on a Tx
skb when we don't really need to.  The other two are related details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When processing a TSO we may have frags spread across several
descriptors, and the total count of frags in one skb may exceed
our per descriptor IONIC_MAX_FRAGS: this is fine as long as
each descriptor has fewer frags than the limit.  Since the skb
could have as many as MAX_SKB_FRAGS, and the first descriptor
is where we track and map the frag buffers, we need to be sure
we can map buffers for all of the frags plus the TSO header in
the first descriptor's buffer array.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a check of the queue's max_sg_elems against the maximum frags we
expect to see per SKB and take the smaller of the two as our max for
the queues' descriptor buffer allocations.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are some cases where an skb carries more frags than the
number of SGs that ionic can support per descriptor - this
forces the driver to linearize the skb.  However, if this
is a TSO packet that is going to become multiple descriptors
(one per MTU-sized packet) and spread the frags across them,
this time-consuming linearization is likely not necessary.

We scan the frag list and count up the number of SGs that
would be created for each descriptor that would be generated,
and only linearize if we hit the SG limit on a descriptor.
In most cases, we won't even get to the frag list scan, so
this doesn't affect typical traffic.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-09-18 (ice)

This series contains updates to ice driver only.

Sergey prepends ICE_ to PTP timer commands to clearly convey namespace
of commands.

Karol adds retrying to acquire hardware semaphore for cross-timestamping
and avoids writing to timestamp registers on E822 devices. He also
renames some defines to be more clear and align with the data sheet.
Additionally, a range check is moved in order to reduce duplicated code.

Jake adds cross-timestamping support for E823 devices as well as adds
checks against netlist to aid in determining support for GNSS. He also
corrects improper pin assignment for certain E810-T devices and
refactors/cleanups PTP related code such as adding PHY model to ease checks
for different needed implementations, removing unneeded EXTTS flag, and
adding macro to check for source timer owner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Uwe Kleine-König says:

====================
net: mdio: Convert to platform remove callback returning void

this series convert all platform drivers below drivers/net/mdio to
use remove_new. The motivation is to get rid of an integer return code
that is (mostly) ignored by the platform driver core and error prone on
the driver side.

See commit 5c5a7680 ("platform: Provide a remove callback that
returns no value") for an extended explanation and the eventual goal.

There are no interdependencies between the patches. As there are still
quite a few drivers to convert, I'm happy about every patch that makes
it in. So even if there is a merge conflict with one patch until you
apply, please apply the remainder of this series anyhow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Uwe Kleine-König says:

====================
net: dsa: Convert to platform remove callback returning void

this series converts all platform drivers below drivers/net/dsa to use
remove_new. The motivation is to get rid of an integer return code
that is (mostly) ignored by the platform driver core and error prone on
the driver side.

See commit 5c5a7680 ("platform: Provide a remove callback that
returns no value") for an extended explanation and the eventual goal.

There are no interdependencies between the patches. As there are still
quite a few drivers to convert, I'm happy about every patch that makes
it in. So even if there is a merge conflict with one patch until you
apply or a subject prefix is suboptimal, please apply the remainder of
this series anyhow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>