- 29 Nov, 2010 30 commits
-
-
Joe Perches authored
These were probably just for initial driver debugging and have not been enabled in builds in git history. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Use vsprintf extension %pM for a mac address in one instance. Signed-off-by:
-
Joe Perches authored
Neaten the phy_init function by adding and calling vendor specific functions. object size is reduced by ~1kb: $ size drivers/net/forcedeth.o.* text data bss dec hex filename 83475 1848 19304 104627 198b3 drivers/net/forcedeth.o.new 84459 1848 19544 105851 19d7b drivers/net/forcedeth.o.old Signed-off-by:
-
Joe Perches authored
Deduplicate the code use for the init/reset of this device. Signed-off-by:
-
Joe Perches authored
Use netdev_<level> when a struct net_device * is available. Signed-off-by:
-
Joe Perches authored
Convert printks to pr_<level>. Remove "forcedeth: " from some calls as it's now added by pr_fmt. Signed-off-by:
-
Joe Perches authored
The remaining dprintk uses are emitted as KERN_INFO. Change these dprintk uses to netdev_dbg. Remove the now unused dprintk macros. Signed-off-by:
-
Joe Perches authored
Use the standard code to emit hex dumps. Signed-off-by:
-
Joe Perches authored
Use the more standard macro to preface netdev->name. Fix casting on resource use. Signed-off-by:
-
Joe Perches authored
Move the printk out of reg_delay and make the callers emit a message on error. Signed-off-by:
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
Eric Dumazet authored
Avoid sparse warnings : add __rcu annotations and use rcu_dereference_protected() where necessary. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
-
Eric Dumazet authored
store_xps_map() allocates maps that are used by single cpu, it makes sense to use NUMA allocations. Signed-off-by:
-
Shan Wei authored
1. SCTP_CMD_NUM_VERBS,SCTP_CMD_MAX These two macros have never been used for several years since v2.6.12-rc2. 2.sctp_port_rover,sctp_port_alloc_lock The commit 063930 abandoned global variables of port_rover and port_alloc_lock, but still keep two macros to refer to them. So, remove them now. commit 06393009 Author: Stephen Hemminger <shemminger@linux-foundation.org> Date: Wed Oct 10 17:30:18 2007 -0700 [SCTP]: port randomization Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
-
Scott J. Goldman authored
If RSS is disabled, we can ifdef out some RSS specific code. This fixes the compile error found by Randy Dunlap. Signed-off-by:
Scott J. Goldman <scottjg@vmware.com> Reviewed-by:
Bhavesh Davda <bhavesh@vmware.com> Signed-off-by:
-
Tom Herbert authored
This patch adds XPS_CONFIG option to enable and disable XPS. This is done in the same manner as RPS_CONFIG. This is also fixes build failure in XPS code when SMP is not enabled. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Frank Blaschka authored
The tso hdr is longer then the regular l3 hdr. Fix the calculation of the total len by accounting the size of the tso hdr. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
Device initialization of a qeth device contains a STARTLAN step. This step may fail, if cable is not yet plugged in. The qeth device stays in state HARDSETUP until cable is plugged in. This prevents further preparational initialization steps of the qeth device and its network interface. This patch makes sure initialization of qeth device continues, even though cable is not yet plugged in. Once carrier is available, qeth is notified, triggers a recovery which results in a working network interface. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Sachin Sant authored
Commit 1d7138de igmp: RCU conversion of in_dev->mc_list converted rwlock to RCU. Update the s390 network drivers(qeth & lcs) code to adapt to this change. V2 : Changes based on suggestions given by Eric Dumazet Signed-off-by:
Sachin Sant <sachinp@in.ibm.com> Signed-off-by:
-
Giuseppe Cavallaro authored
The commit to convert to use the dev_pm_ops struct introduces a bug. The shutdown flag is not yet used because the hibernation on memory is done by using the freeze callback. Thanks to Vlad for having reported it. Reported-by:
Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
Szymon Janc <szymon@janc.net.pl> Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Szymon Janc authored
forcedeth: include <linux/io.h> and <linux/uaccess.h> instead of <asm/io.h> and <asm/uaccess.h> as suggested by checkpatch Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
- 28 Nov, 2010 10 commits
-
-
Breno Leitao authored
Currently the ret variable is not used for anything other than receive the value of the t3_adapter_error(), which will always be 0, because the reset parameter is 0. Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
Jozsef Kadlecsik authored
jhash is widely used in the kernel and because the functions are inlined, the cost in size is significant. Also, the new jhash functions are slightly larger than the previous ones so better un-inline. As a preparation step, the calls to the internal macros are replaced with the plain jhash function calls. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Timo Teräs authored
fl->fl_gre_key is network byte order contrary to fl->fl_icmp_*. Make xfrm_flowi_{s|d}port return network byte order values for gre key too. Signed-off-by:Timo Teräs <timo.teras@iki.fi> Signed-off-by:
-
Jonas Bonn authored
Calculating the BD entry using a modulus operation isn't optimal, especially inside the loop. This patch removes the modulus operations in favour of: i) simply checking for wrapping in the case of cur_rx ii) forcing num_tx to be a power of two and using it to mask out the entry from cur_tx The also prevents possible issues related overflow of the cur_rx and cur_tx counters. Signed-off-by:Jonas Bonn <jonas@southpole.se> Signed-off-by:
-
Jonas Bonn authored
update_ethoc_tx_stats doesn't need to return anything so make its return type void in order to avoid an unnecessary cast when the function is called. Signed-off-by:
-
Jonas Bonn authored
MDIO read and write were checking whether a timeout had expired to determine whether to recheck the result of the MDIO operation. Under heavy CPU usage, however, it was possible for the timeout to expire before the routine got around to be able to check a second time even, thus erroneousy returning an -EBUSY. This patch changes the the MDIO IO routines to try up to five times to complete the operation before giving up, thus lessening the dependency on CPU load. This resolves a problem whereby a ping flood would keep the CPU so busy that the above problem would manifest itself; the MDIO command to check link status would fail and the interface would erroneously be shut down. Signed-off-by:
-
Jonas Bonn authored
The old interrupt handling was incorrect in that it did not account for the fact that the interrupt source bits get set irregardless of whether or not their corresponding mask is set. This patch fixes that by masking off the source bits for masked interrupts. Furthermore, the handling of transmission events is moved to the NAPI polling handler alongside the reception handler, thus preventing a whole bunch of interrupts during heavy traffic. Signed-off-by:
-
Jonas Bonn authored
An interrupt may occur between checking bd.stat and clearing the interrupt source register which would result in the packet going totally unnoticed as the interrupt will be missed. Double check bd.stat after clearing the interrupt source register to guard against such an occurrence. Signed-off-by:
-
Adam Edvardsson authored
Occasionally, it seems that some race is causing the interrupts to not be reenabled otherwise with the end result that networking just stops working. Enabling interrupts after calling napi_complete is more in line with what other drivers do. Signed-off-by:
-
Jonas Bonn authored
Signed-off-by:
-
