- 28 Sep, 2020 1 commit
-
-
Ville Syrjälä authored
Previously intel_dump_pipe_config() used to dump the full crtc state whether or not the crtc was logically enabled or not. As that meant occasionally dumping confusing stale garbage I changed it to check whether the crtc is logically enabled or not. However I did not realize that the state checker readout code does not populate crtc_state.hw.{active,enabled}. Hence the state checker dump would only give us a full dump of the sw state but not the hw state. Fix that by populating those bits of the hw state as well. Reviewed-by:Uma Shankar <uma.shankar@intel.com> Fixes: 10d75f54 ("drm/i915: Fix plane state dumps") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-2-ville.syrjala@linux.intel.com (cherry picked from commit 504c7bd8) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 27 Sep, 2020 1 commit
-
-
Julia Lawall authored
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 22 Sep, 2020 23 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.10: UAPI Changes: Cross-subsystem Changes: - virtio: Merged a PR for patches that will affect drm/virtio Core Changes: - dev: More devm_drm convertions and removal of drm_dev_init - atomic: Split out drm_atomic_helper_calc_timestamping_constants of drm_atomic_helper_update_legacy_modeset_state - ttm: More rework Driver Changes: - i915: selftests improvements - panfrost: support for Amlogic SoC - vc4: one fix - tree-wide: conversions to devm_drm_dev_alloc, - ast: simplifications of the atomic modesetting code - panfrost: multiple fixes - vc4: multiple fixes Signed-off-by: -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.10-2020-09-18: amdgpu: - Support for PCIe DPC recovery - Sienna Cichlid updates - Navy Flounder updates - RAS fixes - Refactor DC interrupt handling - Display fixes - Fix issues with OLED panels - Mclk fixes for navi1x - Watermark fixes for renoir and raven2 - Misc code cleanups - Misc bug fixes amdkfd: - Fix a memory leak - Fix a crach in GPU reset - Add process eviction counters radeon: - expose sclk via sysfs hwmon interface - Revert bad PLL fix scheduler: - Kernel doc fixes Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Driver Changes: - Reduce INTEL_DISPLAY_ENABLED to just removed outputs treating it as disconnected (Ville) - Introducing new AUX, DVO, and TC ports and refactoring code around hot plug interrupts for those. (Ville) - Centralize PLL_ENABLE register lookup (Anusha) - Improvements around DP downstream facing ports (DFP). (Ville) - Enable YCbCr 444->420 conversion for HDMI DFPs. Ville - Remove the old global state on Display's atomic modeset (Ville) - Nuke force_min_cdclk_changed (Ville) - Extend a TGL W/A to all SKUs and to RKL (Swathi) Signed-off-by:
-
Dave Airlie authored
Merge tag 'cdns-mhdp-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next Cadence MHDP8546 DisplayPort bridge driver Signed-off-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Two cleanups - Simply use dev_err_probe() instead of returning -EPROBE_DEFER. - Drop drm_parms allocation and deallocation code which aren't needed. Signed-off-by:
-
ssh://git.freedesktop.org/git/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.10-rc1 This is a handful of patches that add bridge support for Tegra devices and fix a couple of minor issues. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
Miscellaneous R-Car display driver changes: - R8A7742, R8A774E1 and R8A77961 support - Fixes for pitch of YUV planar formats, non-visible plane handling and VSP device reference count - Kconfig fix to avoid displaying disabled options in .config Signed-off-by:
-
Laurent Pinchart authored
The reference to the VSP device acquired with of_find_device_by_node() in rcar_du_vsp_init() is never released. Fix it with a drmm action, which gets run both in the probe error path and in the remove path. Fixes: 6d62ef3a ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Reported-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Lad Prabhakar authored
The rcar_dw_hdmi driver is also used on Renesas RZ/G2 SoCs. Update the Kconfig entry description to reflect this. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The DU driver handles non-visible planes (fully clipped by the display's boundaries) by considering them as disabled. It thus disables the plane at the hardware level when the plane is moved off-screen. However, if the plane was previously disabled and is non-visible when it gets enabled, the attempt to disable it crashes, as the plane wasn't previously enabled. Fix it. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com>
-
Laurent Pinchart authored
When creating a frame buffer, the driver verifies that the pitches for the chroma planes match the luma plane. This is done incorrectly for fully planar YUV formats, without taking horizontal subsampling into account. Fix it. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds R-Car M3-W+ (R8A77961) support which is compatible with the R-Car M3-W (R8A77960). Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
This patch adds R-Car M3-W+ (R8A77961) SoC bindings. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
The DT example erronously uses the "renesas,r8a7795-dw-hdmi", when the correct value is "renesas,r8a7795-hdmi". It is furthermore missing the generic "renesas,rcar-gen3-hdmi" compatible string. Fix it. Signed-off-by:
-
Kuninori Morimoto authored
Document the R-Car M3-W+ (R8A77961) SoC in the R-Car DU bindings. Signed-off-by:
-
Marian-Cristian Rotariu authored
The LVDS encoder on RZ/G2H (R8A774E1) SoC is identical to R-Car Gen3 so just reuse the rcar_lvds_gen3_info structure to hookup R8A774E1 to LVDS encoder driver. Signed-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by:
-
Marian-Cristian Rotariu authored
Document RZ/G2H (R8A774E1) SoC bindings. Signed-off-by:
-
Marian-Cristian Rotariu authored
Document the RZ/G2H (R8A774E1) LVDS bindings. Signed-off-by:
-
Marian-Cristian Rotariu authored
Hookup RZ/G2H (R8A774E1) to DU driver. R8A774E1 has one RGB output, one LVDS output and one HDMI output. Signed-off-by:
-
Marian-Cristian Rotariu authored
Document the RZ/G2H (a.k.a. r8a774e1) SoC in the R-Car DU bindings. Signed-off-by:
-
Biju Das authored
Add the support for enabling optional regulator that may be used as VCC source. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
Biju Das authored
Document optional power-supply property that may be used to specify the regulator powering up the device. Signed-off-by:
-
Marek Szyprowski authored
Since commit 9495b7e9 ("driver core: platform: Initialize dma_parms for platform devices") driver core handles allocation of the dma_parms structure for platform device, so there is no need to manually allocate nor free it. Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
- 21 Sep, 2020 11 commits
-
-
Maxime Ripard authored
The vc4 display engine has a first controller called the HVS that will perform the composition of the planes. That HVS has 3 FIFOs and can therefore compose planes for up to three outputs. The timings part is generated through a component called the Pixel Valve, and the BCM2711 has 6 of them. Thus, the HVS has some bits to control which FIFO gets output to which Pixel Valve. The current code supports that muxing by looking at all the CRTCs in a new DRM atomic state in atomic_check, and given the set of constraints that we have, assigns FIFOs to CRTCs or reject the mode entirely. The actual muxing will occur during atomic_commit. However, that doesn't work if only a fraction of the CRTCs' state is updated in that state, since it will ignore the CRTCs that are kept running unmodified, and will thus unassign its associated FIFO, and later disable it. In order to make the code work as expected, let's pull the CRTC state of all the enabled CRTC in our atomic_check so that we can operate on all the running CRTCs, no matter whether they are affected by the new state or not. Fixes: 87ebcd42 ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Tested-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by:
-
Tian Tao authored
Update kernel-doc line comments to fix warnings reported by make W=1. drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'glob' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'from_wq' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'extra' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'ctx' not described in 'ttm_shrink' Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Acked-by:
Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/391317/Signed-off-by:
-
Neil Armstrong authored
This adds the required GPU quirks, including the quirk in the PWR registers at the GPU reset time and the IOMMU quirk for shareability issues observed on G52 in Amlogic G12B SoCs. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
-
Neil Armstrong authored
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM, G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset time. Since the Amlogic's integration of the GPU cores with the SoC is not publicly documented we do not know what does these values, but they permit having a fully functional GPU running with Panfrost. Signed-off-by:
-
Neil Armstrong authored
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM, G12A/SM1 & G12B SoCs needs a quirk in the PWR registers after each reset. This adds a callback in the device compatible struct of permit this. Signed-off-by:
-
Daniel Vetter authored
We can now also delete drm_dev_init, now that vkms, vgem and i915 selftests are resolved. Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-5-daniel.vetter@ffwll.ch
-
Luben Tuikov authored
Convert to using devm_drm_dev_alloc(), as drm_dev_init() is going away. v2: Remove drm_dev_put() since a) devres doesn't do refcounting, see Documentation/driver-api/driver-model/devres.rst, Section 4, paragraph 1; and since b) devres acts as garbage collector when the DRM device's parent's devres "action" callback is called to free the container device (amdgpu_device), which embeds the DRM dev. Acked-by:Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
-
Daniel Vetter authored
To avoid having to create all the device and driver scaffolding we just manually create and destroy a devres_group. v2: Rebased v3: use devres_open/release_group so we can use devm without real hacks in the driver core or having to create an entire fake bus for testing drivers. Might want to extract this into helpers eventually, maybe as a mock_drm_dev_alloc or test_drm_dev_alloc. v4: - Fix IS_ERR handling (Matt) - Delete surplus put_device() in mock_device_release (intel-gfx-ci) v5: - do not switch to device_add - it breaks runtime pm in the tests and with the devres_group_add/release no longer needed for automatic cleanup (CI). Update commit message to match. - print correct error in pr_err (Matt) v6: Remove now unused err variable (CI). v7: More warning fixes ... Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Just some prep work before we rework the lifetime handling, which requires replacing all the drm_dev_put in selftests by something else. v2: Don't go with a static inline, upsets the header tests and separation. Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
- 18 Sep, 2020 4 commits
-
-
Jingwen Chen authored
smu_post_init needs to enable SMU feature, while this require virtualization off. Skip it since this feature is not used in SRIOV. v2: move the check to the early stage of smu_post_init. v3: fix typo Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by:
Emily.Deng <Emily.Deng@amd.com> Signed-off-by:
-
Evan Quan authored
For CDR disabled case, the dummy reads workaround is not needed. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Jing Xiangfeng authored
Remove the superfluous break, as there is a 'return' before it. Fixes: bad07ff7 ("fbcon: smart blitter usage for scrolling") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Vaibhav Gupta authored
The changes made in below mentioned commit removed CONFIG_PM containers from drivers/video/fbdev/aty/atyfb_base.c but not from drivers/video/fbdev/aty/atyfb.h for respective callbacks. This resulted in error for implicit declaration for those callbacks. Fixes: 348b2956 ("fbdev: aty: use generic power management") Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
