- 24 Apr, 2024 39 commits
-
-
Alexander Lobakin authored
There are several functions taking pointers to data they don't modify. This includes statistics fetching, page and page_pool parameters, etc. Constify the pointers, so that call sites will be able to pass const pointers as well. No functional changes, no visible changes in functions sizes. Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Alexander Lobakin authored
Add NUMA-aware counterparts for kvmalloc_array() and kvcalloc() to be able to flexibly allocate arrays for a particular node. Rewrite kvmalloc_array() to kvmalloc_array_node(NUMA_NO_NODE) call. Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
Alexander Lobakin authored
As an intermediate step, remove all page splitting/recycling code. Just always allocate a new page and don't touch its refcount, so that it gets freed by the core stack later. Same for the "in-place" recycling, i.e. when an unused buffer gets assigned to a first needs-refilling descriptor. In some cases, this was leading to moving up to 63 &iavf_rx_buf structures around the ring on a per-field basis -- not something wanted on hotpath. The change allows to greatly simplify certain parts of the code: Function: add/remove: 0/2 grow/shrink: 0/7 up/down: 0/-744 (-744) Although the array of &iavf_rx_buf is barely used now and could be replaced with just page pointer array, don't touch it now to not complicate replacing it with libie Rx buffer struct later on. No surprise perf loses up to 30% here, but that regression will go away once PP lands. Note that iavf_rx_pg_*() definitions are left to reduce diffstat. They will be removed with the conversion to Page Pool. Signed-off-by:
-
Alexander Lobakin authored
Ever since build_skb() became stable, the old way with allocating an skb for storing the headers separately, which will be then copied manually, was slower, less flexible, and thus obsolete. * It had higher pressure on MM since it actually allocates new pages, which then get split and refcount-biased (NAPI page cache); * It implies memcpy() of packet headers (40+ bytes per each frame); * the actual header length was calculated via eth_get_headlen(), which invokes Flow Dissector and thus wastes a bunch of CPU cycles; * XDP makes it even more weird since it requires headroom for long and also tailroom for some time (since mbuf landed). Take a look at the ice driver, which is built around work-arounds to make XDP work with it. Even on some quite low-end hardware (not a common case for 100G NICs) it was performing worse. The only advantage "legacy-rx" had is that it didn't require any reserved headroom and tailroom. But iavf didn't use this, as it always splits pages into two halves of 2k, while that save would only be useful when striding. And again, XDP effectively removes that sole pro. There's a train of features to land in IAVF soon: Page Pool, XDP, XSk, multi-buffer etc. Each new would require adding more and more Danse Macabre for absolutely no reason, besides making hotpath less and less effective. Remove the "feature" with all the related code. This includes at least one very hot branch (typically hit on each new frame), which was either always-true or always-false at least for a complete NAPI bulk of 64 frames, the whole private flags cruft, and so on. Some stats: Function: add/remove: 0/4 grow/shrink: 0/7 up/down: 0/-721 (-721) RO Data: add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-40 (-40) Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Reviewed-by:
-
Alexander Lobakin authored
Not a secret there's a ton of code duplication between two and more Intel ethernet modules. Before introducing new changes, which would need to be copied over again, start decoupling the already existing duplicate functionality into a new module, which will be shared between several Intel Ethernet drivers. Add the lookup table which converts 8/10-bit hardware packet type into a parsed bitfield structure for easy checking packet format parameters, such as payload level, IP version, etc. This is currently used by i40e, ice and iavf and it's all the same in all three drivers. The only difference introduced in this implementation is that instead of defining a 256 (or 1024 in case of ice) element array, add unlikely() condition to limit the input to 154 (current maximum non-reserved packet type). There's no reason to waste 600 (or even 3600) bytes only to not hurt very unlikely exception packets. The hash computation function now takes payload level directly as a pkt_hash_type. There's a couple cases when non-IP ptypes are marked as L3 payload and in the previous versions their hash level would be 2, not 3. But skb_set_hash() only sees difference between L4 and non-L4, thus this won't change anything at all. The module is behind the hidden Kconfig symbol, which the drivers will select when needed. The exports are behind 'LIBIE' namespace to limit the scope of the functions. Not that non-HW-specific symbols will live in yet another module, libeth. This is done to easily distinguish pretty generic code ready for reusing by any other vendor and/or for moving the layer up from the code useful in Intel's 1-100G drivers only. Signed-off-by:
-
David S. Miller authored
Daniel Machon says: ==================== net: sparx5: add support for port mirroring This series adds support for port mirroring, and port mirroring stats, through tc matchall action FLOW_ACTION_MIRRED. The hardware has three independent mirroring probes. Each probe can be configured with a separate set of filtering conditions that must be fulfilled before traffic is mirrored. A mirror probe can have up to 64 source ports and a single monitor port. The direction of a mirror probe determines if rx or tx traffic is mirrored from the source port to the monitor port. To: David S. Miller <davem@davemloft.net> To: Eric Dumazet <edumazet@google.com> To: Jakub Kicinski <kuba@kernel.org> To: Paolo Abeni <pabeni@redhat.com> To: Lars Povlsen <lars.povlsen@microchip.com> To: Steen Hegelund <Steen.Hegelund@microchip.com> To: UNGLinuxDriver@microchip.com To: Russell King <linux@armlinux.org.uk> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Cc: Yue Haibing <yuehaibing@huawei.com> --- Changes in v3: - Ditch do_div() (patch #3) to fix warning on hexagon arch, reported by intel bot - Link to v2: https://lore.kernel.org/r/20240418-port-mirroring-v2-0-20642868b386@microchip.com Changes in v2: - Fix clang build warning about uninitialized variable 'err' - Link to v1: https://lore.kernel.org/r/20240418-port-mirroring-v1-0-e05c35007c55@microchip.com ==================== Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Machon authored
Add support for tc matchall mirror stats. When a new matchall mirror rule is added, the baseline stats for that port is saved. Signed-off-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Signed-off-by:
-
Daniel Machon authored
Add the necessary tc glue to add and delete mirror rules through tc matchall. Signed-off-by:
-
Daniel Machon authored
The hardware supports three independent mirroring probes. Each probe can be configured to mirror rx or tx traffic (direction). Using tc matchall, it is now possible to add a source port and a monitor port to a mirror probe. Depending on the mirror direction, rx or tx traffic from a source port will be mirrored to the monitor port. A single source port can be a member of multiple mirror probes. Signed-off-by:
-
Daniel Machon authored
In preparation for new tc matchall rules, we add a bit of bookkeeping code to keep track of them. The rules are identified by the cookie passed from the tc stack. Signed-off-by:
-
Daniel Machon authored
In preparation for port mirroring support through tc matchall, add the required register definitions. Signed-off-by:
-
David S. Miller authored
Breno Leitao says: ==================== allocate dummy device dynamically struct net_device shouldn't be embedded into any structure, instead, the owner should use the private space to embed their state into net_device. But, in some cases the net_device is embedded inside the private structure, which blocks the usage of zero-length arrays inside net_device. Create a helper to allocate a dummy device at dynamically runtime, and move the Ethernet devices to use it, instead of embedding the dummy device inside the private structure. This fixes all the network cases plus some wireless drivers. PS: Due to lack of hardware, unfortunately most these patches are compiled tested only, except ath11k that was kindly tested by Kalle Valo. --- Changelog: v7: * Document the return value of alloc_netdev_dummy() v6: * No code change. Just added Reviewed-by: and fix a commit message v5: * Added a new patch to fix some typos in the previous code * Rebased to net-net/main v4: * Added a new patch to add dummy device at free_netdev(), as suggested by Jakub. * Added support for some wireless driver. * Added some Acked-by and Reviewed-by. v3: * Use free_netdev() instead of kfree() as suggested by Jakub. * Change the free_netdev() place in ipa driver, as suggested by Alex Elder. * Set err in the error path in the Marvell driver, as suggested by Simon Horman. v2: * Patch 1: Use a pre-defined name ("dummy#") for the dummy net_devices. * Patch 2-5: Added users for the new helper. v1: * https://lore.kernel.org/all/20240327200809.512867-1-leitao@debian.org/ ==================== Signed-off-by: -
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct ath11k_ext_irq_grp by converting it into a pointer. Then use the leverage alloc_netdev() to allocate the net_device object at ath11k_ahb_config_ext_irq() for ahb, and ath11k_pcic_ext_irq_config() for pcic. The free of the device occurs at ath11k_ahb_free_ext_irq() for the ahb case, and ath11k_pcic_free_ext_irq() for the pcic case. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by:
Breno Leitao <leitao@debian.org> Tested-by:
Kalle Valo <kvalo@kernel.org> Acked-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct ath10k by converting it into a pointer. Then use the leverage alloc_netdev() to allocate the net_device object at ath10k_core_create(). The free of the device occurs at ath10k_core_destroy(). [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by:
-
Breno Leitao authored
There is a new dummy netdev allocator, use it instead of alloc_netdev()/init_dummy_netdev combination. Using alloc_netdev() with init_dummy_netdev might cause some memory corruption at the driver removal side. Fixes: 61cdb09f ("wifi: qtnfmac: allocate dummy net_device dynamically") Signed-off-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from the private struct by converting it into a pointer. Then use the leverage the new alloc_netdev_dummy() helper to allocate and initialize dummy devices. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from the private struct by converting it into a pointer. Then use the leverage the new alloc_netdev_dummy() helper to allocate and initialize dummy devices. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from the private struct by converting it into a pointer. Then use the leverage the new alloc_netdev_dummy() helper to allocate and initialize dummy devices. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from the private struct by converting it into a pointer. Then use the leverage the new alloc_netdev_dummy() helper to allocate and initialize dummy devices. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by:
Elad Nachman <enachman@marvell.com> Signed-off-by:
-
Breno Leitao authored
It is impossible to use init_dummy_netdev together with alloc_netdev() as the 'setup' argument. This is because alloc_netdev() initializes some fields in the net_device structure, and later init_dummy_netdev() memzero them all. This causes some problems as reported here: https://lore.kernel.org/all/20240322082336.49f110cc@kernel.org/ Split the init_dummy_netdev() function in two. Create a new function called init_dummy_netdev_core() that does not memzero the net_device structure. Then have init_dummy_netdev() memzero-ing and calling init_dummy_netdev_core(), keeping the old behaviour. init_dummy_netdev_core() is the new function that could be called as an argument for alloc_netdev(). Also, create a helper to allocate and initialize dummy net devices, leveraging init_dummy_netdev_core() as the setup argument. This function basically simplify the allocation of dummy devices, by allocating and initializing it. Freeing the device continue to be done through free_netdev() Suggested-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Breno Leitao authored
For dummy devices, exit earlier at free_netdev() instead of executing the whole function. This is necessary, because dummy devices are special, and shouldn't have the second part of the function executed. Otherwise reg_state, which is NETREG_DUMMY, will be overwritten and there will be no way to identify that this is a dummy device. Also, this device do not need the final put_device(), since dummy devices are not registered (through register_netdevice()), where the device reference is increased (at netdev_register_kobject()/device_add()). Suggested-by:
-
Breno Leitao authored
Fix bad grammar in description of init_dummy_netdev() function. This topic showed up in the review of the "allocate dummy device dynamically" patch set. Suggested-by:
-
David S. Miller authored
Arınç ÜNAL says: ==================== MT7530 DSA Subdriver Improvements Act IV This is the forth patch series with the goal of simplifying the MT7530 DSA subdriver and improving support for MT7530, MT7531, and the switch on the MT7988 SoC. I have done a simple ping test to confirm basic communication on all switch ports on MCM and standalone MT7530, and MT7531 switch with this patch series applied. MT7621 Unielec, MCM MT7530: rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000 MT7622 Bananapi, MT7531: gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000 MT7623 Bananapi, standalone MT7530: rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000 This patch series finalises the patch series linked below. https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com --- Changes in v2: - Add two new patches to the end. - Patch 13 - Add the missing patch log. - Link to v1: https://lore.kernel.org/r/20240419-for-netnext-mt7530-improvements-4-v1-0-6d852ca79b1d@arinc9.com ==================== Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by:
-
Arınç ÜNAL authored
Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on MT7531AE. Therefore, the GPIO 11-12 pins are set to function as MDC and MDIO to expose the MDIO bus of the switch. Replace the comment with a better explanation. Signed-off-by:
-
Arınç ÜNAL authored
The mt7531_rgmii_setup() function does not use the port variable, do not pass the variable to it. Signed-off-by:
-
Arınç ÜNAL authored
Use priv->ds->num_ports on all for loops which configure the switch registers. In the future, the value of MT7530_NUM_PORTS will depend on priv->id. Therefore, this change prepares the subdriver for a simpler implementation. Signed-off-by:
-
Arınç ÜNAL authored
The mac_port_validate member of the mt753x_info structure is not being used, remove it. Improve the member description section in the process. Signed-off-by:
-
Arınç ÜNAL authored
The MT7530_PMEEECR_P() register is on MT7530, MT7531, and the switch on the MT7988 SoC. Rename the definition for them to MT753X_PMEEECR_P(). Use the FIELD_PREP and FIELD_GET macros. Rename GET_LPI_THRESH() and SET_LPI_THRESH() to LPI_THRESH_GET() and LPI_THRESH_SET(). Signed-off-by:
-
Arınç ÜNAL authored
Get rid of checking whether functions are filled properly. priv->info which is an mt753x_info structure is filled and checked for before this check. It's unnecessary checking whether it's filled properly. Signed-off-by:
-
Arınç ÜNAL authored
With the support of the MT7988 SoC switch, the MAC speed capabilities defined on mt753x_phylink_get_caps() won't apply to all switch models anymore. Move them to more appropriate locations instead of overwriting config->mac_capabilities. Remove the comment on mt753x_phylink_get_caps() as it's become invalid with the support of MT7531 and MT7988 SoC switch. Add break to case 6 of mt7988_mac_port_get_caps() to be explicit. Signed-off-by:
-
Arınç ÜNAL authored
The mt7530_setup_mdio() and mt7531_setup_common() functions should be checked for errors. Return if the functions return a non-zero value. Signed-off-by:
-
Arınç ÜNAL authored
On MT7530, the media-independent interfaces of port 5 and 6 are controlled by the MT7530_P5_DIS and MT7530_P6_DIS bits of the hardware trap. Deal with these bits only when the relevant port is being enabled or disabled. This ensures that these ports will be disabled when they are not in use. Do not set MT7530_CHG_TRAP on mt7530_setup_port5() as that's already being done on mt7530_setup(). Instead of globally setting MT7530_P5_MAC_SEL, clear it, then set it only on the appropriate case. If PHY muxing is detected, clear MT7530_P5_DIS before calling mt7530_setup_port5(). Signed-off-by:
-
Arınç ÜNAL authored
The MT7530_HWTRAP and MT7530_MHWTRAP registers are on MT7530 and MT7531. It's called hardware trap on MT7530, software trap on MT7531. That's because some bits of the trap on MT7530 cannot be modified by software whilst all bits of the trap on MT7531 can. Rename the definitions for them to MT753X_TRAP and MT753X_MTRAP. Add MT7530 and MT7531 prefixes to the definitions specific to the switch model. Remove the extra parentheses from MT7530_XTAL_40MHZ and MT7530_XTAL_20MHZ. Rename MHWTRAP_PHY0_SEL, MHWTRAP_MANUAL, and MHWTRAP_PHY_ACCESS to be on par with the "MT7621 Giga Switch Programming Guide v0.3" document. Make an enumaration for the XTAL frequency. Set the data type of the xtal variable on mt7531_pll_setup() to it. Signed-off-by:
-
Arınç ÜNAL authored
The MT7530_MFC register is on MT7530, MT7531, and the switch on the MT7988 SoC. Rename it to MT753X_MFC. Bit 7 to 0 differs between MT7530 and MT7531/MT7988. Add MT7530 prefix to these definitions, and define the IGMP/MLD Query Frame Flooding Ports mask for MT7531. Rename the cases of MIRROR_MASK to MIRROR_PORT_MASK. Move mt753x_mirror_port_get() and mt753x_port_mirror_set() to mt7530.h as macros. Signed-off-by:
-
Arınç ÜNAL authored
The mt753x_bpdu_port_fw enum is globally used for manipulating the process of deciding the forwardable ports, specifically concerning the CPU port(s). Therefore, rename it and the values in it to mt753x_to_cpu_fw. Change FOLLOW_MFC to SYSTEM_DEFAULT to be on par with the switch documents. Signed-off-by:
-
Arınç ÜNAL authored
The p5_intf_sel pointer is used to store the information of whether PHY muxing is used or not. PHY muxing is a feature specific to port 5 of the MT7530 switch. Do not use it for other switch models. Rename the pointer to p5_mode to store the mode the port is being used in. Rename the p5_interface_select enum to mt7530_p5_mode, the string representation to mt7530_p5_mode_str, and the enum elements. If PHY muxing is not detected, the default mode, GMAC5, will be used. Signed-off-by:
-
Arınç ÜNAL authored
The MT7530_PMCR_P() registers are on MT7530, MT7531, and the switch on the MT7988 SoC. Rename the definition for them to MT753X_PMCR_P(). Bit 15 is for MT7530 only. Add MT7530 prefix to the definition for bit 15. Use GENMASK and FIELD_PREP for PMCR_IFG_XMIT(). Rename PMCR_TX_EN and PMCR_RX_EN to PMCR_MAC_TX_EN and PMCR_MAC_TX_EN to follow the naming on the "MT7621 Giga Switch Programming Guide v0.3", "MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version) v0.1" documents. These documents show that PMCR_RX_FC_EN is at bit 5. Correct this along with renaming it to PMCR_FORCE_RX_FC_EN, and the same for PMCR_TX_FC_EN. Remove PMCR_SPEED_MASK which doesn't have a use. Rename the force mode definitions for MT7531 to FORCE_MODE. Add MASK at the end for the mask that includes all force mode definitions. Signed-off-by:
-
Arınç ÜNAL authored
The MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits let the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits determine the 1G/100 EEE abilities of the MAC. If MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 are unset, the abilities are left to be determined by PHY auto polling. The commit 40b5d2f1 ("net: dsa: mt7530: Add support for EEE features") made it so that the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits are set on mt753x_phylink_mac_link_up(). But it did not set the MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits. Because of this, the EEE abilities will be determined by PHY auto polling, regardless of the result of phy_init_eee(). Define these bits and add them to the MT7531_FORCE_MODE mask which is set in mt7531_setup_common(). With this, there won't be any EEE abilities set when phy_init_eee() returns a negative value. Thanks to Russell for explaining when phy_init_eee() could return a negative value below. Looking at phy_init_eee(), it could return a negative value when: 1. phydev->drv is NULL 2. if genphy_c45_eee_is_active() returns negative 3. if genphy_c45_eee_is_active() returns zero, it returns -EPROTONOSUPPORT 4. if phy_set_bits_mmd() fails (e.g. communication error with the PHY) If we then look at genphy_c45_eee_is_active(), then: genphy_c45_read_eee_adv() and genphy_c45_read_eee_lpa() propagate their non-zero return values, otherwise this function returns zero or positive integer. If we then look at genphy_c45_read_eee_adv(), then a failure of phy_read_mmd() would cause a negative value to be returned. Looking at genphy_c45_read_eee_lpa(), the same is true. So, it can be summarised as: - phydev->drv is NULL - there is a communication error accessing the PHY - EEE is not active otherwise, it returns zero on success. If one wishes to determine whether an error occurred vs EEE not being supported through negotiation for the negotiated speed, if it returns -EPROTONOSUPPORT in the latter case. Other error codes mean either the driver has been unloaded or communication error. In conclusion, determining the EEE abilities by PHY auto polling shouldn't result in having any EEE abilities enabled, when one of the last two situations in the summary happens. And it seems that if phydev->drv is NULL, there would be bigger problems with the device than a broken link. So this is not a bugfix. Signed-off-by:
-
Eric Dumazet authored
If we no longer hold RTNL, we must use netdev_master_upper_dev_get_rcu() instead of netdev_master_upper_dev_get(). Fixes: ba0f7806 ("neighbour: no longer hold RTNL in neigh_dump_info()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240421185753.1808077-1-edumazet@google.comSigned-off-by:
-
- 23 Apr, 2024 1 commit
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== selftests: drv-net: support testing with a remote system Implement support for tests which require access to a remote system / endpoint which can generate traffic. This series concludes the "groundwork" for upstream driver tests. I wanted to support the three models which came up in discussions: - SW testing with netdevsim - "local" testing with two ports on the same system in a loopback - "remote" testing via SSH so there is a tiny bit of an abstraction which wraps up how "remote" commands are executed. Otherwise hopefully there's nothing surprising. I'm only adding a ping test. I had a bigger one written but I was worried we'll get into discussing the details of the test itself and how I chose to hack up netdevsim, instead of the test infra... So that test will be a follow up :) v4: https://lore.kernel.org/all/20240418233844.2762396-1-kuba@kernel.org v3: https://lore.kernel.org/all/20240417231146.2435572-1-kuba@kernel.org v2: https://lore.kernel.org/all/20240416004556.1618804-1-kuba@kernel.org v1: https://lore.kernel.org/all/20240412233705.1066444-1-kuba@kernel.org ==================== Link: https://lore.kernel.org/r/20240420025237.3309296-1-kuba@kernel.orgSigned-off-by:
-
