- 19 Feb, 2019 5 commits
-
-
Maxime Ripard authored
The Allwinner BSP makes sure that we don't end up with a null start delay or with a delay larger than vtotal. The former condition is likely to happen now with the reworked start delay, so make sure we enforce the same boundaries. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com
-
Maxime Ripard authored
The current calculation for the video start delay in the current DSI driver is that it is the total vertical size, minus the front porch and sync length, plus 1. This equals to the active vertical size plus the back porch plus 1. That 1 is coming in the Allwinner BSP from an variable that is set to 1. However, if we look at the Allwinner BSP more closely, and especially in the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can see that this variable is actually computed from the porches and the sync minus 10, clamped between 8 and 100. This fixes the start delay symptom we've seen on some panels (vblank timeouts with vertical white stripes at the bottom of the panel). Reviewed-by:
-
Maxime Ripard authored
The current code allows the TCON clock divider to have a range between 4 and 127 when feeding the DSI controller. The only display supported so far had a display clock rate that ended up using a divider of 4, but testing with other displays show that only 4 seems to be functional. This also aligns with what Allwinner is doing in their BSP, so let's just hardcode that we want a divider of 4 when using the DSI output. Reviewed-by:
-
Eric Anholt authored
Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190207201001.5730-1-eric@anholt.netReviewed-by:
Thomas Spurden <thomas.spurden@broadcom.com> Signed-off-by:
-
Eric Anholt authored
We always decrement at GEM free, so make sure we increment at GEM creation for dma-bufs. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 11 Feb, 2019 8 commits
-
-
Sam Ravnborg authored
With drmP.h removed from drm_modeset_helper.h the build of komeda filed as reported by linux-next Add missing include files to fix build. For the files touched group include files and sort them. The fix was tested on a tree with drm-misc-next merged. And the patch was also tested to work without drm-misc-next merged. Build tested on arm + x86. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [linux-next] Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: James Wang <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Maxime Ripard authored
We need to backmerge drm-next to fix the komeda build failure. Signed-off-by: -
Shayenne Moura authored
Remove KMS cleanup task from documentation solved by patchset https://patchwork.freedesktop.org/series/54310/Signed-off-by:
Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by:
-
Gerd Hoffmann authored
Bisected guest kernel changes crashing qemu. Landed at "6c1cd97b drm/virtio: fix resource id handling". Looked again, and noticed we where not only leaking *some* ids, but *all* ids. The old code never ever called virtio_gpu_resource_id_put(). So, commit 6c1cd97b effectively makes the linux kernel starting re-using IDs after releasing them, and apparently virglrenderer can't deal with that. Oops. This patch puts a temporary stopgap into place for the 5.0 release. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Updates for 5.1: - GDS fixes - Add AMDGPU_CHUNK_ID_SCHEDULED_DEPENDENCIES interface - GPUVM fixes - PCIE DPM switching fixes for vega20 - Vega10 uclk DPM regression fix - DC Freesync fixes - DC ABM fixes - Various DC cleanups Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - Expose RPCS (SSEU) configuration to userspace for Ice Lake in order to allow userspace to reconfigure the subslice config per context basis. (Tvrtko, Lionel) Driver Changes: - Execbuf and preemption improvements including selftests (Chris) - Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo) - Debugfs error handling fix for robustness (Greg) - Improve reg_rw traces (Ville) - Push clear_intel_crtc_state onto the heap (Chris) - Watermark fixes for Ice Lake (Ville) - Fix enable count array size and bounds checking (Tvrtko) - MST Fixes (Lyude) - Prevent race and handle error on I915_GEM_MMAP (Joonas) - Initial rework for an full atomic gamma mode (Ville) Signed-off-by:
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.1-rc1 This set of changes starts of with some refactoring of the CEC support to make it reusable on Tegra210 and later. Following are a couple of fixes for HDMI audio support (via HDA). The bulk here is a set of preparatory patches working towards enabling Tegra186 support for host1x and VIC. Additional patches will be needed to fully enable this, but they're not quite ready yet. To round things off, this also adds support for configuring the SOR crossbar using device tree, and fixes a couple of job-related issues in the host1x code. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
Renesas display drivers changes for v5.1 (2nd part): - R8A7744 LVDS support - DPAD0 output support on D3/E3 Signed-off-by:
-
- 10 Feb, 2019 1 commit
-
-
Shayenne Moura authored
Add a warn to verify the hrtimer_forward_now return and changes ret_overrun from int to u64 to match the return value provided by hrtimer_forward_now. Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190206200813.d5w7gjpepoeeadiy@smtp.gmail.com
-
- 08 Feb, 2019 11 commits
-
-
Manasi Navare authored
This patch adds appropriate kernel documentation for DRM DP helpers used for enabling Display Stream compression functionality in drm_dp_helper.h and drm_dp_helper.c as well as for the DSC spec related structure definitions and helpers in drm_dsc.c and drm_dsc.h Also add links between the functions and structures in the documentation. v3: * Fix the checkpatch warnings (Sean Paul) v2: * Add inline comments for longer structs (Daniel Vetter) * Split the summary and description (Daniel Vetter) Suggested-by:
Daniel Vetter <daniel.vetter@intel.com> Suggested-by:
Sean Paul <sean@poorly.run> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Sean Paul <sean@poorly.run> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Acked-by:
-
Randy Li authored
P010 is a planar 4:2:0 YUV with interleaved UV plane, 10 bits per channel video format. P012 is a planar 4:2:0 YUV 12 bits per channel P016 is a planar 4:2:0 YUV with interleaved UV plane, 16 bits per channel video format. V3: Added P012 and fixed cpp for P010. V4: format definition refined per review. V5: Format comment block for each new pixel format. V6: reversed Cb/Cr order in comments. v7: reversed Cb/Cr order in comments of header files, remove the wrong part of commit message. V8: reversed V7 changes except commit message and rebased. v9: used the new properties to describe those format and rebased. Cc: Daniel Stone <daniel@fooishbar.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Randy Li <ayaka@soulik.info> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by:
Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Maxime Ripard authored
Since the DPHY rework, one error path doesn't set the return error code before jumping to its error label, which in turns make gcc (rightfully) complain about the variable holding the error code being uninitialized. Fix this. Fixes: bb3b6fcb ("sun6i: dsi: Convert to generic phy handling") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next - Add rotator support for s5pv210 . With this patch series, s5pv210 SoC can use rotator module but only NV12 and XRGB8888 formats are supported. - Modify e-mail address . It changes email address of scaler module author. Signed-off-by:
-
Laurent Pinchart authored
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock to the DU channels, even when the LVDS outputs are not in use. Enable and disable the LVDS clock output when enabling or disabling a CRTC connected to the DPAD0 output. Signed-off-by:Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel clock to the DU. This works automatically for LVDS outputs as the LVDS encoder is enabled through the bridge API, enabling the internal PLL and clock output. However, when using the DU DPAD output with the LVDS outputs turned off, the LVDS PLL needs to be controlled manually. Add an API to do so, to be called by the DU driver. The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y unconditionally, as the LVDS driver could be built-in while the DU driver is compiled as a module. Signed-off-by: -
Laurent Pinchart authored
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and supplies a clock to the DU. That clock is used not only for the LVDS outputs but also for the DPAD output. The LVDS encoder thus needs to be available to the DU even when its output is disabled. Don't fail probe in that case on D3 and E3. Signed-off-by: -
Laurent Pinchart authored
Before the driver fully moved to drm_bridge and drm_panel, it was necessary to parse DT and locate encoder and connector nodes. The connector node is now unused and can be removed as a parameter to rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can be greatly simplified, removing most of the DT parsing. Signed-off-by: -
Biju Das authored
The LVDS encoders on RZ/G1N SoC is similar to RZ/G1M. Add support for RZ/G1N (R8A7744) SoC to the LVDS encoder driver. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Document the RZ/G1N (R8A7744) LVDS bindings. Signed-off-by:
Rob Herring <robh@kernel.org>
-
Julia Lawall authored
Add an of_node_put when the result of of_graph_get_remote_port_parent is not available. Add a second of_node_put if no encoder is selected (encoder remains NULL). The semantic match that finds the first problem is as follows (http://coccinelle.lip6.fr): // <smpl> @r exists@ local idexpression e; expression x; @@ e = of_graph_get_remote_port_parent(...); ... when != x = e when != true e == NULL when != of_node_put(e) when != of_fwnode_handle(e) ( return e; | *return ...; ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
- 07 Feb, 2019 15 commits
-
-
Harry Wentland authored
dal_gpio_open and dal_gpio_unlock_pin dereference hpd_gpio. Check for NULL before calling those functions. Fixes: ac627caf ("drm/amd/display: add gpio lock/unlock") Reported-by:
Przemek Socha <soprwa@gmail.com> CC: Chiawen Huang <chiawen.huang@amd.com> CC: Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Tested-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Sam Ravnborg authored
With the removal of drmP.h from drm_modeset_helper.h the drmP.h are no longer included by any include files in include/drm. The drmP.h file is thus only included explicit either in .c files or in local .h files. This makes the process of deleting the drmP.h includes easier as we have a more local dependency chain. v2: - moved updates of .c files in drm/ to a dedicated patch. This allows the updates to the *.c files to be committed without the removal part. So this patch can wait if it causes build failures due to pending changes Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused drm/ to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on x86, arm, alpha, ia64 allmodconfig/allyesconfig. Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused rcar-du to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm allmodconfig/allyesconfig. v2: - new patch. Changes like drm_probe_helper and other required several updates Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused i915 to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. In the files touched the lists of include files was grouped and sorted. Build tested on x86 and arm allmodconfig / allyesconfig. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused vboxvideo to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. In the files touched sort the include files Build tested on x86 and arm allmodconfig / allyesconfig. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
The LUTs are single buffered so we should program them after the double buffered pipe updates have been latched by the hardware. We'll also fix up the IPS vs. split gamma w/a to do the IPS disable like everyone else. Note that this is currently dead code as we don't use the split gamma mode on HSW, but that will be fixed up shortly. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-7-ville.syrjala@linux.intel.comReviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ville Syrjälä authored
Split the color management hooks along the single vs. double buffered registers line. Of the currently programmed registers GAMMA_MODE and the ilk+ pipe CSC are double buffered, the LUTS and CHV CGM block are single buffered. The double buffered register will be programmed during the normal pipe update with evasion, and also during pipe enable so that the settings will already be correct when the pipe starts up before the planes are enabled. The single buffered registers are currently programmed before the vblank evade. Which is totally wrong, but we'll correct that later. v2: Add some docs to explain the two vfuncs (Matt,Uma) Rebase Signed-off-by: -
Ville Syrjälä authored
For bdw+ let's move the GAMMA_MODE write for the legacy LUT mode into the .load_luts() funciton directly, rather than relying on haswell_load_luts(). We'll be getting rid of haswell_load_luts() entirely soon, and it's anyway cleaner to have the GAMMA_MODE write in a single place. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-5-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
Pass the crtc state etc. as const to the color management commit functions. And while at it polish some of the local variables. v2: Rebase Signed-off-by:
-
Ville Syrjälä authored
We shouldn't be computing gamma mode during the commit phase. Move it to the check phase. v2: Reword comments a bit (Matt) Rebase Signed-off-by: -
Ville Syrjälä authored
On g4x+ the pipe gamma enable bit for the primary plane affects the pipe bottom color as well. The same for the pipe csc enable bit on ilk+. Thus we must configure those bits correctly even when the primary plane is disabled. To make the feasible let's split those settings from the plane_ctl() function into a seprate funciton that we can call from the ->disable_plane() hook as well. For consistency we'll do that on all the plane types. While that has no real benefits at this time, it'll become useful when we start to control the pipe gamma/csc enable bits dynamically when we overhaul the color management code. On pre-g4x there doesn't appear to be any way to gamma correct the pipe bottom color, but sticking to the same pattern doesn't hurt. And it'll still help us to do crtc state readout correctly for the pipe gamma enable bit for the color management overhaul. An alternative apporach would be to still precompute these bits into plane_state->ctl, but that would require that we run through the plane check even when the plane isn't logically enabled on any crtc. Currently that condition causes us to short circuit the entire thing and not call ->check_plane(). There would also be some chicken and egg problems with ->check_plane() vs. crtc color state check that would requite splitting certain things into multiple steps. So all in all this seems like the easier route. Signed-off-by:
-
Christian König authored
The exclusive fence is of course perfectly optional here. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Harish Kasiviswanathan authored
v2: Fix SMU message format Send override message after SMU enable features Signed-off-by:Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by:
Eric Huang <JinhuiEric.Huang@amd.com> Signed-off-by:
-
