- 15 May, 2020 6 commits
-
-
Ioana Ciornei authored
Depending on the WRIOP version, the buffer size on the RX path must by a multiple of 64 or 256. Handle this restriction properly by aligning down the buffer size to the necessary value. Also, use the new buffer size dynamically computed instead of the compile time one. Fixes: 27c87486 ("dpaa2-eth: Use a single page per Rx buffer") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Amol Grover authored
During the initialization process, ipmr_new_table() is called to create new tables which in turn calls ipmr_get_table() which traverses net->ipv4.mr_tables without holding the writer lock. However, this is safe to do so as no tables exist at this time. Hence add a suitable lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-next-20200428-syzkaller #0 Not tainted ----------------------------- net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!! ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136 ipmr_new_table net/ipv4/ipmr.c:403 [inline] ipmr_rules_init net/ipv4/ipmr.c:248 [inline] ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089 Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables") Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com Suggested-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Amol Grover <frextrite@gmail.com> Signed-off-by:
-
Amol Grover authored
ipmr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside of an RCU read side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning at boot: [ 4.319347] ============================= [ 4.319349] WARNING: suspicious RCU usage [ 4.319351] 5.5.4-stable #17 Tainted: G E [ 4.319352] ----------------------------- [ 4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!! Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables") Signed-off-by:
-
Madhuparna Bhowmik authored
This patch fixes the following warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc5-next-20200514-syzkaller #0 Not tainted ----------------------------- drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!! Since rtnl lock is held, pass this cond in list_for_each_entry_rcu(). Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by:
-
Kevin Lo authored
Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54810 PHY. Fixes: 0ececcfc ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()") Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 14 May, 2020 7 commits
-
-
Eric Dumazet authored
If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann. 2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion commands, from Paul Blakey. 3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan. 4) Infinite loop when removing nf_conntrack module, from Florian Westphal. 5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing the timeout from the software path. 6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter. ==================== Signed-off-by: -
David S. Miller authored
Signed-off-by: -
Ursula Braun authored
Complete adding of Karsten as maintainer for all S390 networking parts in the kernel. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Wang Wenhu authored
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I recommend it's easier for understanding to make the "ready-interrupt" a bundle for it is a parallel description as "shutdown" which is appended after the slash. Signed-off-by:
Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by:
-
Guillaume Nault authored
We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by:
David Balažic <xerces9@gmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Vinod Koul authored
Driver missed initializing num_por which is one of the por values that driver configures to hardware. In order to get these values, add a new structure ethqos_emac_driver_data which holds por and num_por values and populate that in driver probe. Fixes: a7c30e62 ("net: stmmac: Add driver for Qualcomm ethqos") Reported-by:
Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
-
- 13 May, 2020 10 commits
-
-
Heiner Kallweit authored
phy_restart_aneg() enables aneg in the PHY. That's not what we want if phydev->autoneg is disabled. In this case still update EEE advertisement register, but don't enable aneg and don't trigger an aneg restart. Fixes: f75abeb8 ("net: phy: restart phy autonegotiation after EEE advertisment change") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Florian Fainelli authored
The GENET controller on the Raspberry Pi 4 (2711) is typically interfaced with an external Broadcom PHY via a RGMII electrical interface. To make sure that delays are properly configured at the PHY side, ensure that we the dedicated Broadcom PHY driver (CONFIG_BROADCOM_PHY) is enabled for this to happen. Fixes: 402482a6 ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
David S. Miller authored
Tuong Lien says: ==================== tipc: add some patches This series adds patches to fix some issues in TIPC streaming & service subscription. ==================== Signed-off-by: -
Tuong Lien authored
When a service subscription is expired or canceled by user, it needs to be deleted from the subscription list, so that new subscriptions can be registered (max = 65535 per net). However, there are two issues in code that can cause such an unused subscription to persist: 1) The 'tipc_conn_delete_sub()' has a loop on the subscription list but it makes a break shortly when the 1st subscription differs from the one specified, so the subscription will not be deleted. 2) In case a subscription is canceled, the code to remove the 'TIPC_SUB_CANCEL' flag from the subscription filter does not work if it is a local subscription (i.e. the little endian isn't involved). So, it will be no matches when looking for the subscription to delete later. The subscription(s) will be removed eventually when the user terminates its topology connection but that could be a long time later. Meanwhile, the number of available subscriptions may be exhausted. This commit fixes the two issues above, so as needed a subscription can be deleted correctly. Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Tuong Lien authored
Upon receipt of a service subscription request from user via a topology connection, one 'sub' object will be allocated in kernel, so it will be able to send an event of the service if any to the user correspondingly then. Also, in case of any failure, the connection will be shutdown and all the pertaining 'sub' objects will be freed. However, there is a race condition as follows resulting in memory leak: receive-work connection send-work | | | sub-1 |<------//-------| | sub-2 |<------//-------| | | |<---------------| evt for sub-x sub-3 |<------//-------| | : : : : : : | /--------| | | | * peer closed | | | | | | | |<-------X-------| evt for sub-y | | |<===============| sub-n |<------/ X shutdown | -> orphan | | That is, the 'receive-work' may get the last subscription request while the 'send-work' is shutting down the connection due to peer close. We had a 'lock' on the connection, so the two actions cannot be carried out simultaneously. If the last subscription is allocated e.g. 'sub-n', before the 'send-work' closes the connection, there will be no issue at all, the 'sub' objects will be freed. In contrast the last subscription will become orphan since the connection was closed, and we released all references. This commit fixes the issue by simply adding one test if the connection remains in 'connected' state right after we obtain the connection lock, then a subscription object can be created as usual, otherwise we ignore it. Acked-by:Thang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by:
-
Tuong Lien authored
Currently when a connection is in Nagle mode, we set the 'ack_required' bit in the last sending buffer and wait for the corresponding ACK prior to pushing more data. However, on the receiving side, the ACK is issued only when application really reads the whole data. Even if part of the last buffer is received, we will not do the ACK as required. This might cause an unnecessary delay since the receiver does not always fetch the message as fast as the sender, resulting in a large latency in the user message sending, which is: [one RTT + the receiver processing time]. The commit makes Nagle ACK as soon as possible i.e. when a message with the 'ack_required' arrives in the receiving side's stack even before it is processed or put in the socket receive queue... This way, we can limit the streaming latency to one RTT as committed in Nagle mode. Acked-by:
-
David S. Miller authored
Ursula Braun says: ==================== s390/net: updates 2020-05-13 please apply the fix from Wei Yongjun to netdev's net tree and add Karsten Graul as co-maintainer for drivers/s390/net. ==================== Signed-off-by: -
Ursula Braun authored
Add Karsten as additional maintainer for drivers/s390/net . One of his focal points is the ism driver. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by:
-
Wei Yongjun authored
Fix to return negative error code -ENOMEM from the smcd_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 684b89bc ("s390/ism: add device driver for internal shared memory") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Paolo Abeni authored
The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by:
Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff2 ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
- 12 May, 2020 9 commits
-
-
Eric Dumazet authored
We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100% overhead in tcp_set_rcvlowat() This works well when skb->len/skb->truesize ratio is bigger than 0.5 But if we receive packets with small MSS, we can end up in a situation where not enough bytes are available in the receive queue to satisfy RCVLOWAT setting. As our sk_rcvbuf limit is hit, we send zero windows in ACK packets, preventing remote peer from sending more data. Even autotuning does not help, because it only triggers at the time user process drains the queue. If no EPOLLIN is generated, this can not happen. Note poll() has a similar issue, after commit c7004482 ("tcp: Respect SO_RCVLOWAT in tcp_poll().") Fixes: 03f45c88 ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by:
-
Clay McClure authored
My recent commit b6d49cab ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the form: drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop': cpsw.c:(.text+0x680): undefined reference to `cpts_unregister' ... That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts functions) _is_ enabled. So we end up compiling calls to functions that don't exist, resulting in the linker errors. This patch fixes build errors and restores previous behavior by: - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built - remove TI_CPTS_MOD and, instead, add dependencies from CPTS in TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below: config TI_CPSW_SWITCHDEV ... depends on TI_CPTS || !TI_CPTS which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS -> TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection. Note. For NFS boot + CPTS all of above configs have to be built-in. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Tony Lindgren <tony@atomide.com> Fixes: b6d49cab ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Clay McClure <clay@daemons.net> [grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE] Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic fixes These are a couple more fixes after more fw-upgrade testing. ==================== Signed-off-by: -
Shannon Nelson authored
Since the fw has been re-inited, we need to refresh the port information dma address so we can see fresh port information. Let's call ionic_port_init again, and tweak it to allow for a call to simply refresh the existing dma address. Fixes: c672412f ("ionic: remove lifs on fw reset") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
When running in a bond setup, or some other potential configurations, the netdev mac may have been changed from the default device mac. Since the userland doesn't know about the changes going on under the covers in a fw-upgrade it doesn't know the re-push the mac filter. The driver needs to leave the netdev mac filter alone when rebuilding after the fw-upgrade. Fixes: c672412f ("ionic: remove lifs on fw reset") Signed-off-by:
-
Jacob Keller authored
The do_aux_work callback had documentation in the structure comment which referred to it as "do_work". Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Christoph Paasch authored
When the other MPTCP-peer uses 32-bit data-sequence numbers, we rely on map_seq to indicate how to expand to a 64-bit data-sequence number in expand_seq() when receiving data. For new subflows, this field is not initialized, thus results in an "invalid" mapping being discarded. Fix this by initializing map_seq upon subflow establishment time. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
-
Phil Sutter authored
Expired intervals would still match and be dumped to user space until garbage collection wiped them out. Make sure they stop matching and disappear (from users' perspective) as soon as they expire. Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
If the flow timer expires, the gc sets on the NF_FLOW_TEARDOWN flag. Otherwise, the flowtable software path might race to refresh the timeout, leaving the state machine in inconsistent state. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Reported-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
- 11 May, 2020 7 commits
-
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: fix cleanup after modem crash The first patch in this series fixes a bug where the size of a data transfer request was never set, meaning it was 0. The consequence of this was that such a transfer request would never complete if attempted, and led to a hung task timeout. This data transfer is required for cleaning up IPA hardware state when recovering from a modem crash. The code to implement this cleanup is already present, but its use was commented out because it hit the bug described above. So the second patch in this series enables the use of that "tag process" cleanup code. ==================== Signed-off-by: -
Alex Elder authored
One part of recovering from a modem crash is performing a "tag sequence" of several IPA immediate commands, to clear the hardware pipeline. The sequence ends with a data transfer request on the command endpoint (which is not otherwise done). Unfortunately, attempting to do the data transfer led to a hang, so that request plus two other commands were commented out. The previous commit fixes the bug that was causing that hang. And with that bug fixed we can properly issue the tag sequence when the modem crashes, to return the hardware to a known state. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
When a command gets added to a transaction for the AP->command channel we set the DMA address of its scatterlist entry, but not its DMA length. Fix this bug. Signed-off-by:
-
Florian Westphal authored
'rmmod nf_conntrack' can hang forever, because the netns exit gets stuck in nf_conntrack_cleanup_net_list(): i_see_dead_people: busy = 0; list_for_each_entry(net, net_exit_list, exit_list) { nf_ct_iterate_cleanup(kill_all, net, 0, 0); if (atomic_read(&net->ct.count) != 0) busy = 1; } if (busy) { schedule(); goto i_see_dead_people; } When nf_ct_iterate_cleanup iterates the conntrack table, all nf_conn structures can be found twice: once for the original tuple and once for the conntracks reply tuple. get_next_corpse() only calls the iterator when the entry is in original direction -- the idea was to avoid unneeded invocations of the iterator callback. When support for clashing entries was added, the assumption that all nf_conn objects are added twice, once in original, once for reply tuple no longer holds -- NF_CLASH_BIT entries are only added in the non-clashing reply direction. Thus, if at least one NF_CLASH entry is in the list then nf_conntrack_cleanup_net_list() always skips it completely. During normal netns destruction, this causes a hang of several seconds, until the gc worker removes the entry (NF_CLASH entries always have a 1 second timeout). But in the rmmod case, the gc worker has already been stopped, so ct.count never becomes 0. We can fix this in two ways: 1. Add a second test for CLASH_BIT and call iterator for those entries as well, or: 2. Skip the original tuple direction and use the reply tuple. 2) is simpler, so do that. Fixes: 6a757c07 ("netfilter: conntrack: allow insertion of clashing entries") Reported-by:Chen Yi <yiche@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Roi Dayan authored
This workqueue is in charge of handling offloaded flow tasks like add/del/stats we should not use WQ_MEM_RECLAIM flag. The flag can result in the following warning. [ 485.557189] ------------[ cut here ]------------ [ 485.562976] workqueue: WQ_MEM_RECLAIM nf_flow_table_offload:flow_offload_worr [ 485.562985] WARNING: CPU: 7 PID: 3731 at kernel/workqueue.c:2610 check_flush0 [ 485.590191] Kernel panic - not syncing: panic_on_warn set ... [ 485.597100] CPU: 7 PID: 3731 Comm: kworker/u112:8 Not tainted 5.7.0-rc1.21802 [ 485.606629] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/177 [ 485.615487] Workqueue: nf_flow_table_offload flow_offload_work_handler [nf_f] [ 485.624834] Call Trace: [ 485.628077] dump_stack+0x50/0x70 [ 485.632280] panic+0xfb/0x2d7 [ 485.636083] ? check_flush_dependency+0x110/0x130 [ 485.641830] __warn.cold.12+0x20/0x2a [ 485.646405] ? check_flush_dependency+0x110/0x130 [ 485.652154] ? check_flush_dependency+0x110/0x130 [ 485.657900] report_bug+0xb8/0x100 [ 485.662187] ? sched_clock_cpu+0xc/0xb0 [ 485.666974] do_error_trap+0x9f/0xc0 [ 485.671464] do_invalid_op+0x36/0x40 [ 485.675950] ? check_flush_dependency+0x110/0x130 [ 485.681699] invalid_op+0x28/0x30 Fixes: 7da182a9 ("netfilter: flowtable: Use work entry per offload command") Reported-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
Paul Blakey authored
Gc step can queue offloaded flow del work or stats work. Those work items can race each other and a flow could be freed before the stats work is executed and querying it. To avoid that, add a pending bit that if a work exists for a flow don't queue another work for it. This will also avoid adding multiple stats works in case stats work didn't complete but gc step started again. Signed-off-by:
-
Luo bin authored
if some function in ndo_stop interface returns failure because of hardware fault, must go on excuting rest steps rather than return failure directly, otherwise will cause memory leak.And bump the timeout for SET_FUNC_STATE to ensure that cmd won't return failure when hw is busy. Otherwise hw may stomp host memory if we free memory regardless of the return value of SET_FUNC_STATE. Fixes: 51ba902a ("net-next/hinic: Initialize hw interface") Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
- 10 May, 2020 1 commit
-
-
Arnd Bergmann authored
gcc-10 warns around a suspicious access to an empty struct member: net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc': net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds] 1522 | memset(&ct->__nfct_init_offset[0], 0, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from net/netfilter/nf_conntrack_core.c:37: include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset' 90 | u8 __nfct_init_offset[0]; | ^~~~~~~~~~~~~~~~~~ The code is correct but a bit unusual. Rework it slightly in a way that does not trigger the warning, using an empty struct instead of an empty array. There are probably more elegant ways to do this, but this is the smallest change. Fixes: c41884ce ("netfilter: conntrack: avoid zeroing timer") Signed-off-by:
-
