- 31 Mar, 2016 40 commits
-
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Arnd Bergmann authored
commit ef2b1d77 upstream. The atlas7 clock controller driver registers a reset controller for itself, which causes a link error when the subsystem is disabled: drivers/built-in.o: In function `atlas7_clk_init': drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register' As the clk driver does not have a Kconfig symbol for itself but it always built-in when the platform is enabled, we have to ensure that the reset controller subsystem is also built-in in this case. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Fixes: 301c5d29 ("clk: sirf: add CSR atlas7 clk and reset support") Signed-off-by:
-
Eric Dumazet authored
commit eee57723 upstream. When un-mapping skb->data in __bcmgenet_tx_reclaim(), we must use the length that was used in original dma_map_single(), instead of skb->len that might be bigger (includes the frags) We simply can store skb_len into tx_cb_ptr->dma_len and use it at unmap time. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luis de Bethencourt authored
commit ed49e650 upstream. When the function dev_get_phys_port_name was added it missed a description for it's len argument. Adding it. Fixes: db24a904 ("net: add support for phys_port_name") Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
Linus Walleij authored
commit ec7957a6 upstream. Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c "clk: vexpress: Add separate SP810 driver" Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Guillaume Nault authored
commit e8e56ffd upstream. Locking ppp_mutex must be done before dereferencing file->private_data, otherwise it could be modified before ppp_unattached_ioctl() takes the lock. This could lead ppp_unattached_ioctl() to override ->private_data, thus leaking reference to the ppp_file previously pointed to. v2: lock all ppp_ioctl() instead of just checking private_data in ppp_unattached_ioctl(), to avoid ambiguous behaviour. Fixes: f3ff8a4d ("ppp: push BKL down into the driver") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Arnd Bergmann authored
commit e07ff943 upstream. The s5m8767_pmic_probe() function calls s5m8767_get_register() to read data without checking the return code, which produces a compile-time warning when that data is accessed: drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe': drivers/regulator/s5m8767.c:924:7: error: 'enable_reg' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/regulator/s5m8767.c:944:30: error: 'enable_val' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the s5m8767_get_register() function to return a -EINVAL not just for an invalid register number but also for an invalid regulator number, as both would result in returning uninitialized data. The s5m8767_pmic_probe() function is then changed accordingly to fail on a read error, as all the other callers of s5m8767_get_register() already do. In practice this probably cannot happen, as we don't call s5m8767_get_register() with invalid arguments, but the gcc warning seems valid in principle, in terms writing safe error checking. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit dec63a4d upstream. gcc-6.0 found an ancient bug in the paride driver, which had a "module_param(verbose, bool, 0);" since before 2.6.12, but actually uses it to accept '0', '1' or '2' as arguments: drivers/block/paride/pd.c: In function 'pd_init_dev_parms': drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare] #define DBMSG(msg) ((verbose>1)?(msg):NULL) In 2012, Rusty did a cleanup patch that also changed the type of the variable to 'bool', which introduced what is now a gcc warning. This changes the type back to 'int' and adapts the module_param() line instead, so it should work as documented in case anyone ever cares about running the ancient driver with debugging. Fixes: 90ab5ee9 ("module_param: make bool parameters really bool (drivers & misc)") Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Streetman authored
commit da6ccaaa upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Markus Trippelsdorf authored
commit d85ce830 upstream. One line in perf_pmu__parse_unit() is indented wrongly, leading to a warning (=> error) from gcc 6: util/pmu.c:156:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] sret = read(fd, alias->unit, UNIT_MAX_LEN); ^~~~ util/pmu.c:153:2: note: ...this 'if' clause, but it is not if (fd == -1) ^~ Signed-off-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 410136f5 ("tools/perf/stat: Add event unit and scale support") Link: http://lkml.kernel.org/r/20151214154440.GC1409@x4Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Alexander Kochetkov authored
commit d5861262 upstream. Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver") Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Sergei Shtylyov authored
commit d57019d1 upstream. The driver of course "knows" that the chip's reset signal is active low, so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however all this will only work iff the GPIO is specified as active-high in the device tree! I think both the driver and the device trees (if there are any -- I was unable to find them) need to be fixed in this case... Fixes: 13a56b44 ("net: phy: at803x: Add support for hardware reset") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Sara Sharon authored
commit d321cd01 upstream. When joining IBSS a full scan should be initiated in order to search for existing cell, unless the fixed_channel parameter was set. A default channel to create the IBSS on if no cell was found is provided as well. However - a scan is initiated only on the default channel provided regardless of whether ifibss->fixed_channel is set or not, with the obvious result of the cell not joining existing IBSS cell that is on another channel. Fixes: 76bed0f4 ("mac80211: IBSS fix scan request") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Florian Fainelli authored
commit d267aefc upstream. The BRCMNAND controller revision 7.1 is almost 100% compatible with the previous v6.0 register offset layout, except for the Correctable Error Reporting Threshold registers. Fix this by adding another table with the correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Michal Kazior authored
commit cf440128 upstream. The ieee80211_queue_stopped() expects hw queue number but it was given raw WMM AC number instead. This could cause frame drops and problems with traffic in some cases - most notably if driver doesn't map AC numbers to queue numbers 1:1 and uses ieee80211_stop_queues() and ieee80211_wake_queue() only without ever calling ieee80211_wake_queues(). On ath10k it was possible to hit this problem in the following case: 1. wlan0 uses queue 0 (ath10k maps queues per vif) 2. offchannel uses queue 15 3. queues 1-14 are unused 4. ieee80211_stop_queues() 5. ieee80211_wake_queue(q=0) 6. ieee80211_wake_queue(q=15) (other queues are not woken up because both driver and mac80211 know other queues are unused) 7. ieee80211_rx_h_mesh_fwding() 8. ieee80211_select_queue_80211() returns 2 9. ieee80211_queue_stopped(q=2) returns true 10. frame is dropped (oops!) Fixes: d3c1597b ("mac80211: fix forwarded mesh frame queue mapping") Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Alexei Starovoitov authored
commit cdc4e47d upstream. Lots of places in the kernel use memcpy(buf, comm, TASK_COMM_LEN); but the result is typically passed to print("%s", buf) and extra bytes after zero don't cause any harm. In bpf the result of bpf_get_current_comm() is used as the part of map key and was causing spurious hash map mismatches. Use strlcpy() to guarantee zero-terminated string. bpf verifier checks that output buffer is zero-initialized, so even for short task names the output buffer don't have junk bytes. Note it's not a security concern, since kprobe+bpf is root only. Fixes: ffeedafb ("bpf: introduce current->pid, tgid, uid, gid, comm accessors") Reported-by:
Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Jiri Kosina authored
commit c8b08ca5 upstream. mkspec is copying built kernel to temporrary location /boot/vmlinuz-$KERNELRELEASE-rpm and runs installkernel on it. This however directly leads to grub2 menuentry for this suffixed binary being generated as well during the run of installkernel script. Later in the process the temporary -rpm suffixed files are removed, and therefore we end up with spurious (and non-functional) grub2 menu entries for each installed kernel RPM. Fix that by using a different temporary name (prefixed by '.'), so that the binary is not recognized as an actual kernel binary and no menuentry is created for it. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Fixes: 3c9c7a14 ("rpm-pkg: add %post section to create initramfs and grub hooks") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Philipp Zabel authored
commit bc717d5e upstream. If we bail out this early, v4l2_device_register() has not been called yet, so no need to call v4l2_device_unregister(). Fixes: b7bd660a ("[media] coda: Call v4l2_device_unregister() from a single location") Reported-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Andreas Färber authored
commit bb473593 upstream. As preparation for arm64 based mesongxbb, which pulls in this code once enabling ARCH_MESON, fix a size_t vs. unsigned int type mismatch. The loop uses a local unsigned int variable, so adopt that type, matching the header. Fixes: 7a29a869 ("clk: meson: Add support for Meson clock controller") Signed-off-by:
Andreas Färber <afaerber@suse.de> Acked-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
-
Arnd Bergmann authored
commit baefd701 upstream. The implementation of QP paravirtualization back in linux-3.7 included some code that looks very dubious, and gcc-6 has grown smart enough to warn about it: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'verify_qp_parameters': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3154:5: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) { ^~ drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3144:4: note: ...this 'if' clause, but it is not if (slave != mlx4_master_func_num(dev)) >From looking at the context, I'm reasonably sure that the indentation is correct but that it should have contained curly braces from the start, as the update_gid() function in the same patch correctly does. Signed-off-by:
-
Arnd Bergmann authored
commit ba4bc32e upstream. An older patch to convert the API in the s3c i2s driver ended up passing a const pointer into a function that takes a non-const pointer, so we now get a warning: sound/soc/samsung/s3c2412-i2s.c: In function 's3c2412_iis_dev_probe': sound/soc/samsung/s3c2412-i2s.c:172:9: error: passing argument 3 of 's3c_i2sv2_register_component' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] However, the s3c_i2sv2_register_component() function again passes the pointer into another function taking a const, so we just need to change its prototype. Fixes: eca3b01d ("ASoC: switch over to use snd_soc_register_component() on s3c i2s") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Huibin Hong authored
commit b920cc31 upstream. Rockchip_spi_set_cs could be called by spi_setup, but spi_setup may be called by device driver after runtime suspend. Then the spi clock is closed, rockchip_spi_set_cs may access the spi registers, which causes cpu block in some socs. Fixes: 64e36824 ("spi/rockchip: add driver for Rockchip RK3xxx") Signed-off-by:
Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by:
-
Jesse Gross authored
commit b8cba75b upstream. ipip encapsulated packets can be merged together by GRO but the result does not have the proper GSO type set or even marked as being encapsulated at all. Later retransmission of these packets will likely fail if the device does not support ipip offloads. This is similar to the issue resolved in IPv6 sit in feec0cb3 ("ipv6: gro: support sit protocol"). Reported-by:
Patrick Boutilier <boutilpj@ednet.ns.ca> Fixes: 9667e9bb ("ipip: Add gro callbacks to ipip offload") Tested-by:
Jesse Gross <jesse@kernel.org> Signed-off-by:
-
David Hildenbrand authored
commit b15d53d0 upstream. kmap_coherent needs disabled preemption to not schedule in the critical section, just like kmap_coherent on mips and kmap_atomic in general. Fixes: 8222dbe2 "sched/preempt, mm/fault: Decouple preemption from the page fault logic" Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
Arnd Bergmann authored
commit aeb6641f upstream. gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array() call in lpfc_online(), which clearly doesn't look right: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online': drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] lpfc_destroy_vport_work_array(phba, vports); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not if (vports != NULL) ^~ Looking at the patch that introduced this code, it's clear that the behavior is correct and the indentation is wrong. This fixes the indentation and adds curly braces around the previous if() block for clarity, as that is most likely what caused the code to be misindented in the first place. Signed-off-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Paolo Abeni authored
commit ad0ea198 upstream. Currently, ingress ipv4 broadcast datagrams are dropped since, in udp_v4_early_demux(), ip_check_mc_rcu() is invoked even on bcast packets. This patch addresses the issue, invoking ip_check_mc_rcu() only for mcast packets. Fixes: 6e540309 ("ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
NeilBrown authored
commit a6ab1e81 upstream. sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer set. In this case it aborts the queuing of the upcall. However it has already taken a new counted reference on "h" and doesn't "put" it, even though it frees the data structure holding the reference. So let's delay the "cache_get" until we know we need it. Fixes: f9e1aedc ("sunrpc/cache: remove races with queuing an upcall.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit a25f4a95 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c15 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Ard Biesheuvel authored
commit 9c6672ac upstream. Commit 6d80dba1 ("efi: Provide a non-blocking SetVariable() operation") implemented a non-blocking alternative for the UEFI SetVariable() invocation performed by efivars, since it may occur in atomic context. However, this version of the function was never exposed via the efivars struct, so the non-blocking versions was not actually callable. Fix that. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 6d80dba1 ("efi: Provide a non-blocking SetVariable() operation") Link: http://lkml.kernel.org/r/1454364428-494-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
-
Pali Rohár authored
commit 98f42221 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Linus Walleij authored
commit 95a001f2 upstream. As of commit 876fe76d "mtd: maps: physmap: Add reference counter to set_vpp()" the comment in the header file is incorrect and misleading. Fix it up. Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Parsons <lost.distance@yahoo.com> Fixes: 876fe76d ("mtd: maps: physmap: Add reference counter to set_vpp()") Signed-off-by:
-
Dan Carpenter authored
commit 93fce954 upstream. At the end of the function we expect "status" to be zero, but it's either -EINVAL or uninitialized. Fixes: 788bf83d ('drm/amdkfd: Add wave control operation to debugger') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 8e580411 upstream. The davinci platform has tried to get support for the EEPROM right, but failed to get a clean build so far. At the moment, we get a warning whenever CONFIG_SYSFS is disabled, as that is needed by EEPROM_AT24: warning: (MACH_DAVINCI_EVM && MACH_SFFSDR && MACH_DAVINCI_DM6467_EVM && MACH_DAVINCI_DM365_EVM && MACH_DAVINCI_DA830_EVM && MACH_MITYOMAPL138 && MACH_MINI2440) selects EEPROM_AT24 which has unmet direct dependencies (I2C && SYSFS) Kevin Hilman initially added the 'select' to ensure that EEPROM_AT24 is always enabled in machines that really want it for normal operation (i.e. for reading the MAC address). This broke when I2C was disabled, and Russell King followed up with another patch to select that as well. I now see that the SYSFS dependency is still missing, which leaves us with three options: a) add 'select SYSFS' in addition to the others b) change AT24_EEPPROM to work without sysfs (should be possible) c) remove all those selects again and get the files to build when I2C is disabled. I would really hate to do a) because adding select statements that hardwire user-selectable symbols is generally a bad idea. I first tried b) but then ended up redoing the patch from scratch to approach c), so we can also remove the other selects. I checked that CONFIG_I2C is still enabled with davinci_all_defconfig, so that does not have to change. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Dan Carpenter authored
commit 8c09b9fd upstream. We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by:
-
Marcin Ślusarz authored
commit 89fee59b upstream. Steam frequently puts game binaries in folders with spaces. Note: "(deleted)" markers are now treated as part of the file name. Signed-off-by:
Marcin Ślusarz <marcin.slusarz@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Fixes: 60648033 ("perf tools: Use sscanf for parsing /proc/pid/maps") Link: http://lkml.kernel.org/r/20160119190303.GA17579@marcin-Inspiron-7720Signed-off-by:
-
Arnd Bergmann authored
commit 83d6f1f1 upstream. Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by:
-
Dan Carpenter authored
commit 8134233e upstream. If the call to acpi_get_object_info() fails then "info" hasn't been initialized. In that situation, we already know that "version" should be XGENE_AHCI_V1 so we don't actually need to dereference "info". Fixes: c9802a4b ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.') Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Addy Ke authored
commit 80abf888 upstream. Generic dma controller on Rockchips' platform cannot support DMAFLUSHP instruction which make dma to flush the req of non-aligned or non-multiple of what we need. That will cause an unrecoverable dma bus error. The saftest way is to set dma max burst to 1. Signed-off-by:
Addy ke <addy.ke@rock-chips.com> Fixes: 64e36824 ("spi/rockchip: add driver for Rockchip...") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> cc: Heiko Stuebner <heiko@sntech.de> cc: Olof Johansson <olof@lixom.net> cc: Doug Anderson <dianders@chromium.org> cc: Sonny Rao <sonnyrao@chromium.org> Acked-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 7d3fdfff upstream. Restore the lost phys status page cleanup. Fixes the following splat with DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 21615 at ../lib/dma-debug.c:974 dma_debug_device_change+0x190/0x1f0() pci 0000:00:02.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] One of leaked entries details: [device address=0x0000000023163000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Modules linked in: i915(-) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm sha256_generic hmac drbg ctr ccm sch_fq_codel binfmt_misc joydev mousedev arc4 ath5k iTCO_wdt mac80211 smsc_ircc2 ath snd_intel8x0m snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm input_leds i2c_i801 pcspkr snd_timer cfg80211 snd soundcore i2c_core ehci_pci firewire_ohci ehci_hcd firewire_core lpc_ich 8139too rfkill crc_itu_t mfd_core mii usbcore rng_core intel_agp intel_gtt usb_common agpgart irda crc_ccitt fujitsu_laptop led_class parport_pc video parport evdev backlight CPU: 0 PID: 21615 Comm: rmmod Tainted: G U 4.4.0-rc4-mgm-ovl+ #4 Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004 e31a3de0 e31a3de0 e31a3d9c c128d4bd e31a3dd0 c1045a0c c15e00c4 e31a3dfc 0000546f c15dfad2 000003ce c12b3740 000003ce c12b3740 00000000 00000001 f61fb8a0 e31a3de8 c1045a83 00000009 e31a3de0 c15e00c4 e31a3dfc e31a3e4c Call Trace: [<c128d4bd>] dump_stack+0x16/0x19 [<c1045a0c>] warn_slowpath_common+0x8c/0xd0 [<c12b3740>] ? dma_debug_device_change+0x190/0x1f0 [<c12b3740>] ? dma_debug_device_change+0x190/0x1f0 [<c1045a83>] warn_slowpath_fmt+0x33/0x40 [<c12b3740>] dma_debug_device_change+0x190/0x1f0 [<c1065499>] notifier_call_chain+0x59/0x70 [<c10655af>] __blocking_notifier_call_chain+0x3f/0x80 [<c106560f>] blocking_notifier_call_chain+0x1f/0x30 [<c134cfb3>] __device_release_driver+0xc3/0xf0 [<c134d0d7>] driver_detach+0x97/0xa0 [<c134c440>] bus_remove_driver+0x40/0x90 [<c134db18>] driver_unregister+0x28/0x60 [<c1079e8c>] ? trace_hardirqs_on_caller+0x12c/0x1d0 [<c12c0618>] pci_unregister_driver+0x18/0x80 [<f83e96e7>] drm_pci_exit+0x87/0xb0 [drm] [<f8b3be2d>] i915_exit+0x1b/0x1ee [i915] [<c10b999c>] SyS_delete_module+0x14c/0x210 [<c1079e8c>] ? trace_hardirqs_on_caller+0x12c/0x1d0 [<c115a9bd>] ? ____fput+0xd/0x10 [<c1002014>] do_fast_syscall_32+0xa4/0x450 [<c149f6fa>] sysenter_past_esp+0x3b/0x5d ---[ end trace c2ecbc77760f10a0 ]--- Mapped at: [<c12b3183>] debug_dma_alloc_coherent+0x33/0x90 [<f83e989c>] drm_pci_alloc+0x18c/0x1e0 [drm] [<f8acd59f>] intel_init_ring_buffer+0x2af/0x490 [i915] [<f8acd8b0>] intel_init_render_ring_buffer+0x130/0x750 [i915] [<f8aaea4e>] i915_gem_init_rings+0x1e/0x110 [i915] v2: s/BUG_ON/WARN_ON/ since dim doens't like the former anymore Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 5c6c6003 ("drm/i915: Remove DRI1 ring accessors and API") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1452538112-5331-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Marco Angaroni authored
commit 7617a24f upstream. The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by:
Marco Angaroni <marcoangaroni@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
