Pull parisc updates from Helge Deller:
 "The majority of lines changed are due the addition of a defconfig for
  the C8000 machine.  Even the fix in parisc/kernel/cache.c file is
  actually ony a 10-line fix, but the change became bigger (and much
  nicer) to avoid errors of the checkpatch script.

  Here is the short-changelog:

  This round of parisc updates includes mostly fixes for the C8000
  workstation.  We have a new defconfig file for this machine, as well
  as fixes for it's serial port, the AGP driver and the cache routines
  to cope with the vmas of the FireGL card in a C8000.  The sys32.h
  header file was not used and as such it's now gone"

* 'parisc-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix interrupt routing for C8000 serial ports
  parisc: Remove arch/parisc/kernel/sys32.h header
  parisc: add defconfig for c8000 machine
  parisc: agp/parisc-agp: allow binding of user memory to the AGP GART
  parisc: Fix cache routines to ignore vma's with an invalid pfn

Pull HID fixes from Jiri Kosina:
 - fix hid-sony PS3 sixaxxis breakage from Benjamin Tissories
 - fix hidraw race condition from Yonghua Zheng
 - fix/bandaid for rare device enumeration problems of Logitech Unifying
   receivers from Nestor Lopez Casado

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hidraw: fix improper mutex release
  HID: sony: fix HID mapping for PS3 sixaxis controller
  HID: hid-logitech-dj: querying_devices was never set
  HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""

Pull MCE fix from Tony Luck:
 "Fix a regression in mce-severity.c"

* tag 'please-pull-fix-mce-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  x86/mce: Fix mce regression from recent cleanup

Pull PCI fixes from Bjorn Helgaas:
 "Yinghai fixed a couple regressions: one resource assignment problem
  introduced in v3.10 that showed up with SR-IOV on powerpc, and another
  SR-IOV hot-remove issue related to refcounting changes we merged for
  v3.11.

  Yinghai is still working on another SR-IOV-related fix or two, which
  will be simpler if pciehp is non-modular, so I included the Kconfig
  changes now to get them in earlier.

  Finally, a minor fix for the ARM Marvell EBU host bridge driver that
  was merged for v3.11

  Hotplug:
      PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device
      PCI: hotplug: Convert to be builtin only, not modular
      PCI: pciehp: Convert pciehp to be builtin only, not modular

  Resource allocation:
      PCI: Retry allocation of only the resource type that failed

  ARM:
      PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge"

* tag 'pci-v3.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge
  PCI: Retry allocation of only the resource type that failed
  PCI: pciehp: Convert pciehp to be builtin only, not modular
  PCI: hotplug: Convert to be builtin only, not modular
  PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device

Pull ACPI and power management fixes from Rafael Wysocki:

 - Revert two cpuidle commits added during the 3.8 development cycle
   that turn out to have introduced a significant performance regression
   as requested by Jeremy Eder.

 - The recent patches that made the freezer less heavy-weight introduced
   a regression causing user-space-driven hibernation using the ioctl()
   interface to block indefinitely when the hibernate process executes
   try_to_freeze().  Fix from Colin Cross addresses this by adding a
   process flag to mark the hibernate/suspend process to inform the
   freezer that that process should be ignored.

 - One of the recent cpufreq reverts uncovered a problem in the core
   causing the cpufreq driver module refcount to become negative after a
   system suspend-resume cycle.  Fix from Rafael J Wysocki.

 - The evaluation of the ACPI battery _BIX method has never worked
   correctly, because the commit that added support for it forgot to
   take the "Revision" field in the return package into account.  As a
   result, the reading of battery info doesn't work at all on some
   systems, which is addressed by a fix from Lan Tianyu.

* tag 'pm+acpi-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  freezer: set PF_SUSPEND_TASK flag on tasks that call freeze_processes
  ACPI / battery: Fix parsing _BIX return value
  cpufreq: Fix cpufreq driver module refcount balance after suspend/resume
  Revert "cpuidle: Quickly notice prediction failure for repeat mode"
  Revert "cpuidle: Quickly notice prediction failure in general case"

The Marvell PCIe driver uses an emulated PCI-to-PCI bridge to be able
to dynamically set up MBus address decoding windows for PCI I/O and
memory regions depending on the PCI devices enumerated by Linux.

However, this emulated PCI-to-PCI bridge logic makes the Linux PCI
core believe that prefetchable memory regions are supported (because
the registers are read/write), while in fact no adress decoding window
is ever created for such regions. Since the Marvell MBus address
decoding windows do not distinguish memory regions and prefetchable
memory regions, this patch takes a simple approach: change the
PCI-to-PCI bridge emulation to let the Linux PCI core know that we
don't support prefetchable memory regions.

To achieve this, we simply make the prefetchable memory base a
read-only register that always returns 0. Reading/writing all the
other prefetchable memory related registers has no effect.

This problem was originally reported by Finn Hoffmann
<finn@uni-bremen.de>, who couldn't get a RTL8111/8168B PCI NIC working
on the NSA310 Kirkwood platform after updating to 3.11-rc. The problem
was that the PCI-to-PCI bridge emulation was making the Linux PCI core
believe that we support prefetchable memory, so the Linux PCI core was
only filling the prefetchable memory base and limit registers, which
does not lead to a MBus window being created. The below patch has been
confirmed by Finn Hoffmann to fix his problem on Kirkwood, and has
otherwise been successfully tested on the Armada XP GP platform with a
e1000e PCIe NIC and a Marvell SATA PCIe card.
Reported-by: Finn Hoffmann <finn@uni-bremen.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull drm fixes from Dave Airlie:
 "Radeon, nouveau, exynos, intel, mgag200..

  Not all strictly regressions but there was probably only one patch I'd
  have really left out and it didn't seem worth respinning exynos to
  avoid it, the line change count is quite low.

   radeon: regressions + more dynamic powermanagement fixes, since DPM
     is a new feature, and off by default I'd prefer to keep merging
     fixes since it has a large userbase already and I'd like to keep
     them on mainline

   nouveau: is mostly regression fixes

   i915: is a regression fix since Daniel is on holidays I've merged it.

   mgag200: I've picked a bunch of targetted fixes from a big bunch of
     distro patches,

   exynos: build fixes mostly, one regression fix

  I expect things will slow right down now, I may send on the intel
  early quirk from Jesse separatly, since I think the x86 maintainers
  acked it"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (37 commits)
  drm/i915: fix missed hunk after GT access breakage
  drm/radeon/dpm: re-enable cac control on SI
  drm/radeon/dpm: fix calculations in si_calculate_leakage_for_v_and_t_formula
  drm: fix 64 bit drm fixed point helpers
  drm/radeon/atom: initialize more atom interpretor elements to 0
  drm/nouveau: fix semaphore dmabuf obj
  drm/nouveau/vm: make vm refcount into a kref
  drm/nv31/mpeg: don't recognize nv3x cards as having nv44 graph class
  drm/nv40/mpeg: write magic value to channel object to make it work
  drm/nouveau: fix size check for cards without vm
  drm/nv50-/disp: remove dcb_outp_match call, and related variables
  drm/nva3-/disp: fix hda eld writing, needs to be padded
  drm/nv31/mpeg: fix mpeg engine initialization
  drm/nv50/mc: include vp in the fb error reporting mask
  drm/nouveau: fix null pointer dereference in poll_changed
  drm/nv50/gpio: post-nv92 cards have 32 interrupt lines
  drm/nvc0/fb: take lock in nvc0_ram_put()
  drm/nouveau/core: xtensa firmware size needs to be 0x40000 no matter what
  drm/mgag200: Fix LUT programming for 16bpp
  drm/mgag200: Fix framebuffer pitch calculation
  ...

Pull fbdev fixes from Tomi Valkeinen:
 "Small fbdev fixes:
   - compile fixes
   - atyfb initialization fix
   - Fix freeing of the irq in sh7760fb & nuc900fb"

* tag 'fbdev-fixes-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: sh7760fb: fix to pass correct device identity to free_irq()
  fbdev/atyfb: fix recent breakage in correct_chipset()
  fbdev/sgivwfb: fix compilation error in sgivwfb_mmap()
  video: nuc900fb: fix to pass correct device identity to request_irq()
  vga16fb: Remove unused variable
  video: xilinxfb: Fix compilation warning

Pull vfio fixes from Alex Williamson:
 "misc fixes around overreacting to bus notifier events and a locking
  fix for a corner case blocked remove"

* tag 'vfio-v3.11-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Avoid deadlock on remove
  vfio: Ignore sprurious notifies
  vfio: Don't overreact to DEL_DEVICE

Merge more patches from Andrew Morton:
 "A bunch of fixes.

  Plus Joe's printk move and rework.  It's not a -rc3 thing but now
  would be a nice time to offload it, while things are quiet.  I've been
  sitting on it all for a couple of weeks, no issues"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  vmpressure: make sure there are no events queued after memcg is offlined
  vmpressure: do not check for pending work to prevent from new work
  vmpressure: change vmpressure::sr_lock to spinlock
  printk: rename struct log to struct printk_log
  printk: use pointer for console_cmdline indexing
  printk: move braille console support into separate braille.[ch] files
  printk: add console_cmdline.h
  printk: move to separate directory for easier modification
  drivers/rtc/rtc-twl.c: fix: rtcX/wakealarm attribute isn't created
  mm: zbud: fix condition check on allocation size
  thp, mm: avoid PageUnevictable on active/inactive lru lists
  mm/swap.c: clear PageActive before adding pages onto unevictable list
  arch/x86/platform/ce4100/ce4100.c: include reboot.h
  mm: sched: numa: fix NUMA balancing when !SCHED_DEBUG
  rapidio: fix use after free in rio_unregister_scan()
  .gitignore: ignore *.lz4 files
  MAINTAINERS: dynamic debug: Jason's not there...
  dmi_scan: add comments on dmi_present() and the loop in dmi_scan_machine()
  ocfs2/refcounttree: add the missing NULL check of the return value of find_or_create_page()
  mm: mempolicy: fix mbind_range() && vma_adjust() interaction

We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Helge Deller <deller@gmx.de>

The KERNEL_SYSCALL define is not used anymore so the header can be
removed.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Allow binding of user memory to the AGP GART on systems with HP
Quicksilver AGP bus. This resolves 'bind memory failed' error seen in
dmesg:

 [29.365973] [TTM] AGP Bind memory failed.
 …
 [29.367030] [drm] Forcing AGP to PCI mode

The system doesn't more fail to bind the memory, and hence not falling
back to the PCI mode (if other failures aren't detected).

This is just a simple write down from the following patches:
agp/amd-k7: Allow binding user memory to the AGP GART
agp/hp-agp: Allow binding user memory to the AGP GART
Signed-off-by: Alex Ivanov <gnidorah@p0n4ik.tk>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Helge Deller <deller@gmx.de>

The parisc architecture does not have a pte special bit. As a result,
special mappings are handled with the VM_PFNMAP and VM_MIXEDMAP flags.
VM_MIXEDMAP mappings may or may not have a "struct page" backing. When
pfn_valid() is false, there is no "struct page" backing. Otherwise, they
are treated as normal pages.

The FireGL driver uses the VM_MIXEDMAP without a backing "struct page".
This treatment caused a panic due to a TLB data miss in
update_mmu_cache. This appeared to be in the code generated for
page_address(). We were in fact using a very circular bit of code to
determine the physical address of the PFN in various cache routines.
This wasn't valid when there was no "struct page" backing.  The needed
address can in fact be determined simply from the PFN itself without
using the "struct page".

The attached patch updates update_mmu_cache(), flush_cache_mm(),
flush_cache_range() and flush_cache_page() to check pfn_valid() and to
directly compute the PFN physical and virtual addresses.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Helge Deller <deller@gmx.de>

vmpressure is called synchronously from reclaim where the target_memcg
is guaranteed to be alive but the eventfd is signaled from the work
queue context.  This means that memcg (along with vmpressure structure
which is embedded into it) might go away while the work item is pending
which would result in use-after-release bug.

We have two possible ways how to fix this.  Either vmpressure pins memcg
before it schedules vmpr->work and unpin it in vmpressure_work_fn or
explicitely flush the work item from the css_offline context (as
suggested by Tejun).

This patch implements the later one and it introduces vmpressure_cleanup
which flushes the vmpressure work queue item item.  It hooks into
mem_cgroup_css_offline after the memcg itself is cleaned up.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Tejun Heo <tj@kernel.org>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Li Zefan <lizefan@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

because it is racy and it doesn't give us much anyway as schedule_work
handles this case already.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Tejun Heo <tj@kernel.org>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Li Zefan <lizefan@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is nothing that can sleep inside critical sections protected by
this lock and those sections are really small so there doesn't make much
sense to use mutex for them.  Change the log to a spinlock
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Tejun Heo <tj@kernel.org>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Li Zefan <lizefan@huawei.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Rename the struct to enable moving portions of
printk.c to separate files.

The rename changes output of /proc/vmcoreinfo.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make the code a bit more compact by always using a pointer for the active
console_cmdline.

Move overly indented code to correct indent level.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Create files with prototypes and static inlines for braille support.  Make
braille_console functions return 1 on success.

Corrected CONFIG_A11Y_BRAILLE_CONSOLE=n _braille_console_setup
return value to NULL.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add an include file for the console_cmdline struct so that the braille
console driver can be separated.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make it easier to break up printk into bite-sized chunks.

Remove printk path/filename from comment.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The device_init_wakeup() should be called before rtc_device_register().
Otherwise, sysfs "sys/class/rtc/rtcX/wakealarm" attribute will not be seen
from User space.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zbud_alloc() incorrectly verifies the size of allocation limit.  It
should deny the allocation request greater than (PAGE_SIZE -
ZHDR_SIZE_ALIGNED - CHUNK_SIZE), not (PAGE_SIZE - ZHDR_SIZE_ALIGNED)
which has no remaining spaces for its buddy.  There is no point in
spending the entire zbud page storing only a single page, since we don't
have any benefits.
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunae Seo <sunae.seo@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

active/inactive lru lists can contain unevicable pages (i.e.  ramfs pages
that have been placed on the LRU lists when first allocated), but these
pages must not have PageUnevictable set - otherwise shrink_[in]active_list
goes crazy:

kernel BUG at /home/space/kas/git/public/linux-next/mm/vmscan.c:1122!

1090 static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
1091                 struct lruvec *lruvec, struct list_head *dst,
1092                 unsigned long *nr_scanned, struct scan_control *sc,
1093                 isolate_mode_t mode, enum lru_list lru)
1094 {
...
1108                 switch (__isolate_lru_page(page, mode)) {
1109                 case 0:
...
1116                 case -EBUSY:
...
1121                 default:
1122                         BUG();
1123                 }
1124         }
...
1130 }

__isolate_lru_page() returns EINVAL for PageUnevictable(page).

For lru_add_page_tail(), it means we should not set PageUnevictable()
for tail pages unless we're sure that it will go to LRU_UNEVICTABLE.
Let's just copy PG_active and PG_unevictable from head page in
__split_huge_page_refcount(), it will simplify lru_add_page_tail().

This will fix one more bug in lru_add_page_tail(): if
page_evictable(page_tail) is false and PageLRU(page) is true, page_tail
will go to the same lru as page, but nobody cares to sync page_tail
active/inactive state with page.  So we can end up with inactive page on
active lru.  The patch will fix it as well since we copy PG_active from
head page.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As a result of commit 13f7f789 ("mm: pagevec: defer deciding which
LRU to add a page to until pagevec drain time"), pages on unevictable
lists can have both of PageActive and PageUnevictable set.  This is not
only confusing, but also corrupts page migration and
shrink_[in]active_list.

This patch fixes the problem by adding ClearPageActive before adding
pages into unevictable list.  It also cleans up VM_BUG_ONs.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the build:

  arch/x86/platform/ce4100/ce4100.c: In function 'x86_ce4100_early_setup':
  arch/x86/platform/ce4100/ce4100.c:165:2: error: 'reboot_type' undeclared (first use in this function)
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3105b86a ("mm: sched: numa: Control enabling and disabling of
NUMA balancing if !SCHED_DEBUG") defined numabalancing_enabled to
control the enabling and disabling of automatic NUMA balancing, but it
is never used.

I believe the intention was to use this in place of sched_feat_numa(NUMA).

Currently, if SCHED_DEBUG is not defined, sched_feat_numa(NUMA) will
never be changed from the initial "false".
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We're freeing the list iterator so we can't move to the next entry.
Since there is only one matching mport_id, we can just break after
finding it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that lz4 kernel compression is available, add *.lz4 to .gitignore.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

He must be too, umm, busy to update his own bouncing email address too.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

My previous refactoring in commit 79bae42d ("dmi_scan: refactor
dmi_scan_machine(), {smbios,dmi}_present()") resulted in slightly tricky
code (though I think it's more elegant).  Explain what it's doing.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add the missing NULL check of the return value of find_or_create_page() in
function ocfs2_duplicate_clusters_by_page().

[akpm@linux-foundation.org: fix layout, per Joel]
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this
is doubly wrong:

1. This leaks vma->vm_policy if it is not NULL and not equal to
   next->vm_policy.

   This can happen if vma_merge() expands "area", not prev (case 8).

2. This sets the wrong policy if vma_merge() joins prev and area,
   area is the vma the caller needs to update and it still has the
   old policy.

Revert commit 1444f92c ("mm: merging memory blocks resets
mempolicy") which introduced these problems.

Change mbind_range() to recheck mpol_equal() after vma_merge() to fix
the problem that commit tried to address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven T Hampson <steven.t.hampson@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix association failures not triggering a connect-failure event in
    cfg80211, from Johannes Berg.

 2) Eliminate a potential NULL deref with older iptables tools when
    configuring xt_socket rules, from Eric Dumazet.

 3) Missing RTNL locking in wireless regulatory code, from Johannes
    Berg.

 4) Fix OOPS caused by firmware loading races in ath9k_htc, from Alexey
    Khoroshilov.

 5) Fix usb URB leak in usb_8dev CAN driver, also from Alexey
    Khoroshilov.

 6) VXLAN namespace teardown fails to unregister devices, from Stephen
    Hemminger.

 7) Fix multicast settings getting dropped by firmware in qlcnic driver,
    from Sucheta Chakraborty.

 8) Add sysctl range enforcement for tcp_syn_retries, from Michal Tesar.

 9) Fix a nasty bug in bridging where an active timer would get
    reinitialized with a setup_timer() call.  From Eric Dumazet.

10) Fix use after free in new mlx5 driver, from Dan Carpenter.

11) Fix freed pointer reference in ipv6 multicast routing on namespace
    cleanup, from Hannes Frederic Sowa.

12) Some usbnet drivers report TSO and SG in their feature set, but the
    usbnet layer doesn't really support them.  From Eric Dumazet.

13) Fix crash on EEH errors in tg3 driver, from Gavin Shan.

14) Drop cb_lock when requesting modules in genetlink, from Stanislaw
    Gruszka.

15) Kernel stack leaks in cbq scheduler and af_key pfkey messages, from
    Dan Carpenter.

16) FEC driver erroneously signals NETDEV_TX_BUSY on transmit leading to
    endless loops, from Uwe Kleine-König.

17) Fix hangs from loading mvneta driver, from Arnaud Patard.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits)
  mlx5: fix error return code in mlx5_alloc_uuars()
  mvneta: Try to fix mvneta when compiled as module
  mvneta: Fix hang when loading the mvneta driver
  atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring
  genetlink: fix usage of NLM_F_EXCL or NLM_F_REPLACE
  af_key: more info leaks in pfkey messages
  net/fec: Don't let ndo_start_xmit return NETDEV_TX_BUSY without link
  net_sched: Fix stack info leak in cbq_dump_wrr().
  igb: fix vlan filtering in promisc mode when not in VT mode
  ixgbe: Fix Tx Hang issue with lldpad on 82598EB
  genetlink: release cb_lock before requesting additional module
  net: fec: workaround stop tx during errata ERR006358
  qlcnic: Fix diagnostic interrupt test for 83xx adapters.
  qlcnic: Fix setting Guest VLAN
  qlcnic: Fix operation type and command type.
  qlcnic: Fix initialization of work function.
  Revert "atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring"
  atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring
  net/tg3: Fix warning from pci_disable_device()
  net/tg3: Fix kernel crash
  ...

Pull MIPS fixes from Ralf Baechle:
 - BMIPS SMP fixes
 - a build fix necessary for older compilers
 - two more bugs found my Chandras' testing
 - and one more build fix

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0
  MIPS: BMIPS: do not change interrupt routing depending on boot CPU
  MIPS: powertv: Fix arguments for free_reserved_area()
  MIPS: Set default CPU type for BCM47XX platforms
  MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilation
  MIPS: Fix multiple definitions of UNCAC_BASE.

Pull Xen fixes from Konrad Rzeszutek Wilk:
 - Three fixes for ARM/ARM64 to either compile or not certain generic
   drivers
 - Fix for avoiding a potential deadlock when an user space event
   channel is destroyed.
 - Fix a workqueue resuming multiple times.

* tag 'stable/for-linus-3.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/tmem: do not allow XEN_TMEM on ARM64
  xen/evtchn: avoid a deadlock when unbinding an event channel
  xen/arm: enable PV control for ARM
  xen/arm64: Don't compile cpu hotplug
  xenbus: frontend resume cleanup

Merge tag 'xen-arm-3.11-rc2-warn-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen

Pull Xen ARM fix from Stefano Stabellini.

Update xen_restart to new calling convention.

* tag 'xen-arm-3.11-rc2-warn-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen:
  xen/arm,arm64: update xen_restart after ff701306 and 7b6d864b