- 26 Apr, 2024 28 commits
-
-
Melissa Wen authored
According to [1]: ``` DTN only logs 'pipe_count' instances of MPCC. However in some cases there are different number of MPCC than DPP (pipe_count). ``` As DTN log still relies on pipe_count to print mpcc state, switch to mpcc_count in all occurrences. [1] https://lore.kernel.org/amd-gfx/20240328195047.2843715-39-Roman.Li@amd.com/Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
As we use wb slots more dynamically, we need to lock access to avoid racing on allocation or free. Reviewed-by:
Shaoyun.liu <shaoyunl@amd.com> Signed-off-by:
-
Sonny Jiang authored
kmd_fw_shared changed in VCN5 Signed-off-by:
Sonny Jiang <sonny.jiang@amd.com> Reviewed-by:
Ruijing Dong <ruijing.dong@amd.com> Signed-off-by:
-
David Tadokoro authored
In the header file dc/dcn301/dcn301_dccg.h, the function dccg301_create is declared twice, so remove duplication. Reviewed-by:
David Tadokoro <davidbtadokoro@usp.br> Signed-off-by:
-
Mukul Joshi authored
Subtract the VRAM pinned memory when checking for available memory in amdgpu_amdkfd_reserve_mem_limit function since that memory is not available for use. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Sathishkumar S authored
jpeg ip version v2.1 and higher supports 16kx16k resolution decode Signed-off-by:
Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by:
-
Jose Fernandez authored
When slice_height is 0, the division by slice_height in the calculation of the number of slices will cause a division by zero driver crash. This leaves the kernel in a state that requires a reboot. This patch adds a check to avoid the division by zero. The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor connected via Thunderbolt. The amdgpu driver crashed with this exception when I rebooted the system with the monitor connected. kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447) kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2)) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu After applying this patch, the driver no longer crashes when the monitor is connected and the system is rebooted. I believe this is the same issue reported for 3113. Reviewed-by:
Jose Fernandez <josef@netflix.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3113Signed-off-by:
-
Rodrigo Siqueira authored
This commit add some missing debug registers for DPCS and RDPC debug. Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Sunil Khatri authored
Add ip dump for each ip of the asic in the devcoredump for all the ips where a callback is registered for register dump. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Sunil Khatri authored
Invoke the dump_ip_state function for each ip before the asic resets and save the register values for debugging via devcoredump. Signed-off-by:
-
Sunil Khatri authored
Add support to print ip information to be used to print registers in devcoredump buffer. Signed-off-by:
-
Sunil Khatri authored
Add the protoype for print ip state to be used to print the registers in devcoredump during a gpu reset. Signed-off-by:
-
Sunil Khatri authored
Adding gfx10 gc registers to be used for register dump via devcoredump during a gpu reset. Signed-off-by:
-
Sunil Khatri authored
Add the prototype to dump ip registers for all ips of different asics and set them to NULL for now. Based on the requirement add a function pointer for each of them. Signed-off-by:
-
YiPeng Chai authored
Add interface to reserve bad page. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Ma Jun authored
return 0 to avoid returning an uninitialized variable r Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Acked-by:
-
Jack Xiao authored
Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Acked-by:
Lijo Lazar <lijo.lazar@amd.com> Acked-by:
-
Alex Deucher authored
This avoids a potential conflict with firmwares with the newer HDP flush mechanism. Reviewed-by:
-
Rajneesh Bhardwaj authored
Tune coarse grain clock gating idle threshold and rlc idle timeout to achieve better kernel launch latency. Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
This reverts commit d76c0a23. This change must be reverted since it caused soft hangs when changing the refresh rate to 122 & 144Hz when using a 7000 series GPU. Acked-by:
Harry Wentland <harry.wentland@amd.com> Reported-by:
Mark Broadworth <Mark.Broadworth@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses buffer overflow in the smu_v14_0_init_microcode function. The issue was about the snprintf function writing more bytes into the fw_name buffer than it can hold. The line of code is: snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); Here, snprintf is used to write a formatted string into fw_name. The format is "amdgpu/%s.bin", where %s is a placeholder for the string ucode_prefix. The sizeof(fw_name) argument tells snprintf the maximum number of bytes it can write into fw_name, including the null-terminating character. In the original code, fw_name is an array of 30 characters. The string "amdgpu/%s.bin" could be up to 41 bytes long, which exceeds the 30 bytes allocated for fw_name. This is because %s could be replaced by ucode_prefix, which can be up to 29 characters long. Adding the 12 characters from "amdgpu/" and ".bin", the total length could be 41 characters. To address this, the size of ucode_prefix has been reduced to 15 characters. This ensures that the maximum length of the string written into fw_name does not exceed its capacity. smu_13/14 etc. don't follow legacy scheme ie., amdgpu_ucode_legacy_naming Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c: In function ‘smu_v14_0_init_microcode’: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~ ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30 80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: fe6cd915 ("drm/amd/swsmu: add smu14 ip support") Cc: Li Ma <li.ma@amd.com> Cc: Likun Gao <Likun.Gao@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by:
-
Frank Min authored
Replace tmz flag into buffer flag to make it easier to understand and extend Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
Frank Min <Frank.Min@amd.com> Reviewed-by:
-
Le Ma authored
To adapt to different gc versions in gfx_v9_4_3.c file. Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Prike Liang authored
Here are the corrections needed for the queue ring buffer size calculation for the following cases: - Remove the KIQ VM flush ring usage. - Add the invalidate TLBs packet for gfx10 and gfx11 queue. - There's no VM flush and PFP sync, so remove the gfx9 real ring and compute ring buffer usage. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
-
Mukul Joshi authored
Do VRAM accounting when doing migrations to vram to make sure there is enough available VRAM and migrating to VRAM doesn't evict other possible non-unified memory BOs. If migrating to VRAM fails, driver can fall back to using system memory seamlessly. Signed-off-by:
-
Lijo Lazar authored
During mode-2 reset, pci config space registers are affected at device side. However, certain platforms have switches which assign virtual BAR addresses and returns the same even after device is reset. This affects pci_restore_state() as it doesn't issue another config write, if the value read is same as the saved value. Add a workaround to write saved config space values from driver side. Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence restrict the workaround only to those. Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Lang Yu authored
umsch test needs full GPU functionality(e.g., VM update, TLB flush, possibly buffer moving under memory pressure) which may be not ready under these states. Just skip it to avoid potential issues. Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Reviewed-by:
Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by:
-
Felix Kuehling authored
Handle the case that the restore worker was already scheduled by another eviction while the restore was in progress. Fixes: 9a1c1339 ("drm/amdkfd: Run restore_workers on freezable WQs") Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Tested-by:
Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by:
-
- 23 Apr, 2024 11 commits
-
-
Felix Kuehling authored
Make SVM BOs more likely to get evicted than other BOs. These BOs opportunistically use available VRAM, but can fall back relatively seamlessly to system memory. It also avoids SVM migrations evicting other, more important BOs as they will evict other SVM allocations first. Signed-off-by:
-
Jiapeng Chong authored
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c: dcn32/dcn32_clk_mgr.h is included more than once. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8789Reviewed-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Pierre-Eric Pelloux-Prayer authored
Avoid returning an uninitialized value if we never enter the loop. This case should never be hit in practice, but returning 0 doesn't hurt. The same fix is applied to the 4 places using the same pattern. v2: - fixed typos in commit message (Alex) - use "return 0;" before the done label instead of initializing r to 0 Signed-off-by:Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by:
-
Alex Deucher authored
Makes it easier to review the logs when there are MES errors. v2: use dbg for emitted, add helpers for fetching strings v3: fix missing commas (Harish) v4: drop command prefixes (Felix) v5: squash in bounds fix (Jun) Acked-by:
-
Peyton Lee authored
The vpe dpm settings should be done before firmware is loaded. Otherwise, the frequency cannot be successfully raised. Signed-off-by:
Peyton Lee <peytolee@amd.com> Reviewed-by:
-
Lijo Lazar authored
HDP Flush request bit can be kept unique per AID, and doesn't need to be unique SOC-wide. Assign only bits 10-13 for SDMA v4.4.2. Signed-off-by:
-
Li Ma authored
smu v14.0.1 re-used smu v14.0.0 Signed-off-by:
Li Ma <li.ma@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
Ma Jun authored
Print the od status info if it's not supported. Signed-off-by:
-
Stanley.Yang authored
In order to support more test cases, support user change reset_method at runtime. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
-
Ma Jun authored
gpu_od should be removed if it's an empty directory Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
-
Alex Deucher authored
It's not really an error since the devices don't support the necessary hardware functionality. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3331Tested-by:
Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by:
Kent Russell <kent.russell@amd.com> Signed-off-by:
-
- 22 Apr, 2024 1 commit
-
-
Dave Airlie authored
Linux 6.9-rc5 I've had a persistent msm failure on clang, and the fix is in fixes so just pull it back to fix that. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
