- 15 Nov, 2020 6 commits
-
-
Mike Christie authored
In newer versions of virtio-scsi we just reset the timer when an a command times out, so TMFs are never sent for the cmd time out case. However, in older kernels and for the TMF inject cases, we can still get resets and we end up just failing immediately so the guest might see the device get offlined and IO errors. For the older kernel cases, we want the same end result as the modern virtio-scsi driver where we let the lower levels fire their error handling and handle the problem. And at the upper levels we want to wait. This patch ties the LUN reset handling into the LIO TMF code which will just wait for outstanding commands to complete like we are doing in the modern virtio-scsi case. Note: I did not handle the ABORT case to keep this simple. For ABORTs LIO just waits on the cmd like how it does for the RESET case. If an ABORT fails, the guest OS ends up escalating to LUN RESET, so in the end we get the same behavior where we wait on the outstanding cmds. Signed-off-by:
Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/1604986403-4931-6-git-send-email-michael.christie@oracle.comSigned-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Stefan Hajnoczi <stefanha@redhat.com>
-
Mike Christie authored
Move code to parse lun from req's lun_buf to helper, so tmf code can use it in the next patch. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/1604986403-4931-5-git-send-email-michael.christie@oracle.comSigned-off-by:
-
Mike Christie authored
We might not do the final se_cmd put from vhost_scsi_complete_cmd_work. When the last put happens a little later then we could race where vhost_scsi_complete_cmd_work does vhost_signal, the guest runs and sends more IO, and vhost_scsi_handle_vq runs but does not find any free cmds. This patch has us delay completing the cmd until the last lio core ref is dropped. We then know that once we signal to the guest that the cmd is completed that if it queues a new command it will find a free cmd. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/1604986403-4931-4-git-send-email-michael.christie@oracle.comSigned-off-by:
-
Mike Christie authored
We currently are limited to 256 cmds per session. This leads to problems where if the user has increased virtqueue_size to more than 2 or cmd_per_lun to more than 256 vhost_scsi_get_tag can fail and the guest will get IO errors. This patch moves the cmd allocation to per vq so we can easily match whatever the user has specified for num_queues and virtqueue_size/cmd_per_lun. It also makes it easier to control how much memory we preallocate. For cases, where perf is not as important and we can use the current defaults (1 vq and 128 cmds per vq) memory use from preallocate cmds is cut in half. For cases, where we are willing to use more memory for higher perf, cmd mem use will now increase as the num queues and queue depth increases. Signed-off-by:
-
Mike Christie authored
This adds a helper check if a vq has been setup. The next patches will use this when we move the vhost scsi cmd preallocation from per session to per vq. In the per vq case, we only want to allocate cmds for vqs that have actually been setup and not for all the possible vqs. Signed-off-by:
-
Laurent Vivier authored
ERROR: modpost: "mac_pton" [drivers/vdpa/vdpa_sim/vdpa_sim.ko] undefined! mac_pton() is defined in lib/net_utils.c and is not built if NET is not set. Select GENERIC_NET_UTILS as vdpasim doesn't depend on NET. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201113155706.599434-1-lvivier@redhat.comSigned-off-by:
-
- 02 Nov, 2020 1 commit
-
-
Stephen Rothwell authored
After merging the drm-misc tree, linux-next build (arm multi_v7_defconfig) failed like this: In file included from drivers/gpu/drm/nouveau/nouveau_ttm.c:26: include/linux/swiotlb.h: In function 'swiotlb_max_mapping_size': include/linux/swiotlb.h:99:9: error: 'SIZE_MAX' undeclared (first use in this function) 99 | return SIZE_MAX; | ^~~~~~~~ include/linux/swiotlb.h:7:1: note: 'SIZE_MAX' is defined in header '<stdint.h>'; did you forget to '#include <stdint.h>'? 6 | #include <linux/init.h> +++ |+#include <stdint.h> 7 | #include <linux/types.h> include/linux/swiotlb.h:99:9: note: each undeclared identifier is reported only once for each function it appears in 99 | return SIZE_MAX; | ^~~~~~~~ Caused by commit abe420bf ("swiotlb: Introduce swiotlb_max_mapping_size()") but only exposed by commit "drm/nouveu: fix swiotlb include" Fix it by including linux/limits.h as appropriate. Fixes: abe420bf ("swiotlb: Introduce swiotlb_max_mapping_size()") Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20201102124327.2f82b2a7@canb.auug.org.auSigned-off-by:
-
- 30 Oct, 2020 7 commits
-
-
Laurent Vivier authored
Add macaddr parameter to the module to set the MAC address to use Signed-off-by:
-
Laurent Vivier authored
vdpa_sim generates a ramdom MAC address but it is never used by upper layers because the VIRTIO_NET_F_MAC bit is not set in the features list. Because of that, virtio-net always regenerates a random MAC address each time it is loaded whereas the address should only change on vdpa_sim load/unload. Fix that by adding VIRTIO_NET_F_MAC in the features list of vdpa_sim. Fixes: 2c53d0f6 ("vdpasim: vDPA device simulator") Cc: jasowang@redhat.com Signed-off-by:
-
Zhu Lingshan authored
LKP considered variable 'ret' in vhost_vdpa_setup_vq_irq() as a unused variable, so suggest we remove it. Actually it stores return value of irq_bypass_register_producer(), but we did not check it, we should handle the failure case. This commit will print a message if irq bypass register producer fail, in this case, vqs still remain functional. Signed-off-by:
Zhu Lingshan <lingshan.zhu@intel.com> Reported-by:
-
Laurent Vivier authored
Since commit f959dcd6 ("dma-direct: Fix potential NULL pointer dereference") an error is reported when we load vdpa_sim and virtio-vdpa: [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 It seems that dma_mask is not initialized. This patch initializes dma_mask() and calls dma_set_mask_and_coherent() to fix the problem. Full log: [ 128.548628] ------------[ cut here ]------------ [ 128.553268] WARNING: CPU: 23 PID: 1105 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x14c/0x1d0 [ 128.562139] Modules linked in: virtio_net net_failover failover virtio_vdpa vdpa_sim vringh vhost_iotlb vdpa xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfkill intel_rapl_msr intel_rapl_common isst_if_common sunrpc skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit irqbypass drm_kms_helper crct10dif_pclmul crc32_pclmul syscopyarea ghash_clmulni_intel iTCO_wdt sysfillrect iTCO_vendor_support sysimgblt rapl fb_sys_fops dcdbas intel_cstate drm acpi_ipmi ipmi_si mei_me dell_smbios intel_uncore ipmi_devintf mei i2c_i801 dell_wmi_descriptor wmi_bmof pcspkr lpc_ich i2c_smbus ipmi_msghandler acpi_power_meter ip_tables xfs libcrc32c sd_mod t10_pi sg ahci libahci libata megaraid_sas tg3 crc32c_intel wmi dm_mirror dm_region_hash dm_log [ 128.562188] dm_mod [ 128.651334] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 128.659939] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 128.667419] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 128.672384] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 128.691131] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 128.696357] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 128.703488] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 128.710620] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 128.717754] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 128.724886] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 128.732020] FS: 00007f887bae23c0(0000) GS:ffff9e4ac01c0000(0000) knlGS:0000000000000000 [ 128.740105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.745852] CR2: 0000562bc09de998 CR3: 00000003c156c006 CR4: 00000000007706e0 [ 128.752982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.760114] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.767247] PKRU: 55555554 [ 128.769961] Call Trace: [ 128.772418] virtqueue_add+0x81e/0xb00 [ 128.776176] virtqueue_add_inbuf_ctx+0x26/0x30 [ 128.780625] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 128.785509] virtnet_open+0xf9/0x180 [virtio_net] [ 128.790217] __dev_open+0xe8/0x180 [ 128.793620] __dev_change_flags+0x1a7/0x210 [ 128.797808] dev_change_flags+0x21/0x60 [ 128.801646] do_setlink+0x328/0x10e0 [ 128.805227] ? __nla_validate_parse+0x121/0x180 [ 128.809757] ? __nla_parse+0x21/0x30 [ 128.813338] ? inet6_validate_link_af+0x5c/0xf0 [ 128.817871] ? cpumask_next+0x17/0x20 [ 128.821535] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 128.826676] ? __nla_validate_parse+0x47/0x180 [ 128.831120] __rtnl_newlink+0x541/0x8e0 [ 128.834962] ? __nla_reserve+0x38/0x50 [ 128.838713] ? security_sock_rcv_skb+0x2a/0x40 [ 128.843158] ? netlink_deliver_tap+0x2c/0x1e0 [ 128.847518] ? netlink_attachskb+0x1d8/0x220 [ 128.851793] ? skb_queue_tail+0x1b/0x50 [ 128.855641] ? fib6_clean_node+0x43/0x170 [ 128.859652] ? _cond_resched+0x15/0x30 [ 128.863406] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 128.868110] rtnl_newlink+0x43/0x60 [ 128.871602] rtnetlink_rcv_msg+0x12c/0x380 [ 128.875701] ? rtnl_calcit.isra.39+0x110/0x110 [ 128.880147] netlink_rcv_skb+0x50/0x100 [ 128.883987] netlink_unicast+0x1a5/0x280 [ 128.887913] netlink_sendmsg+0x23d/0x470 [ 128.891839] sock_sendmsg+0x5b/0x60 [ 128.895331] ____sys_sendmsg+0x1ef/0x260 [ 128.899255] ? copy_msghdr_from_user+0x5c/0x90 [ 128.903702] ___sys_sendmsg+0x7c/0xc0 [ 128.907369] ? dev_forward_change+0x130/0x130 [ 128.911731] ? sysctl_head_finish.part.29+0x24/0x40 [ 128.916616] ? new_sync_write+0x11f/0x1b0 [ 128.920628] ? mntput_no_expire+0x47/0x240 [ 128.924727] __sys_sendmsg+0x57/0xa0 [ 128.928309] do_syscall_64+0x33/0x40 [ 128.931887] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 128.936937] RIP: 0033:0x7f88792e3857 [ 128.940518] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 128.959263] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 128.966827] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 128.973960] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 128.981095] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 128.988224] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 128.995357] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.002492] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 129.011093] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 129.018571] Call Trace: [ 129.021027] dump_stack+0x57/0x6a [ 129.024346] __warn.cold.14+0xe/0x3d [ 129.027925] ? dma_map_page_attrs+0x14c/0x1d0 [ 129.032283] report_bug+0xbd/0xf0 [ 129.035602] handle_bug+0x44/0x80 [ 129.038922] exc_invalid_op+0x13/0x60 [ 129.042589] asm_exc_invalid_op+0x12/0x20 [ 129.046602] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 129.051566] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 129.070311] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 129.075536] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 129.082669] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 129.089803] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 129.096936] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 129.104068] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 129.111200] virtqueue_add+0x81e/0xb00 [ 129.114952] virtqueue_add_inbuf_ctx+0x26/0x30 [ 129.119399] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 129.124280] virtnet_open+0xf9/0x180 [virtio_net] [ 129.128984] __dev_open+0xe8/0x180 [ 129.132390] __dev_change_flags+0x1a7/0x210 [ 129.136575] dev_change_flags+0x21/0x60 [ 129.140415] do_setlink+0x328/0x10e0 [ 129.143994] ? __nla_validate_parse+0x121/0x180 [ 129.148528] ? __nla_parse+0x21/0x30 [ 129.152107] ? inet6_validate_link_af+0x5c/0xf0 [ 129.156639] ? cpumask_next+0x17/0x20 [ 129.160306] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 129.165443] ? __nla_validate_parse+0x47/0x180 [ 129.169890] __rtnl_newlink+0x541/0x8e0 [ 129.173731] ? __nla_reserve+0x38/0x50 [ 129.177483] ? security_sock_rcv_skb+0x2a/0x40 [ 129.181928] ? netlink_deliver_tap+0x2c/0x1e0 [ 129.186286] ? netlink_attachskb+0x1d8/0x220 [ 129.190560] ? skb_queue_tail+0x1b/0x50 [ 129.194401] ? fib6_clean_node+0x43/0x170 [ 129.198411] ? _cond_resched+0x15/0x30 [ 129.202163] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 129.206869] rtnl_newlink+0x43/0x60 [ 129.210361] rtnetlink_rcv_msg+0x12c/0x380 [ 129.214462] ? rtnl_calcit.isra.39+0x110/0x110 [ 129.218908] netlink_rcv_skb+0x50/0x100 [ 129.222747] netlink_unicast+0x1a5/0x280 [ 129.226672] netlink_sendmsg+0x23d/0x470 [ 129.230599] sock_sendmsg+0x5b/0x60 [ 129.234090] ____sys_sendmsg+0x1ef/0x260 [ 129.238015] ? copy_msghdr_from_user+0x5c/0x90 [ 129.242461] ___sys_sendmsg+0x7c/0xc0 [ 129.246128] ? dev_forward_change+0x130/0x130 [ 129.250487] ? sysctl_head_finish.part.29+0x24/0x40 [ 129.255368] ? new_sync_write+0x11f/0x1b0 [ 129.259381] ? mntput_no_expire+0x47/0x240 [ 129.263478] __sys_sendmsg+0x57/0xa0 [ 129.267058] do_syscall_64+0x33/0x40 [ 129.270639] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 129.275689] RIP: 0033:0x7f88792e3857 [ 129.279268] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 129.298015] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 129.305581] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 129.312712] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 129.319846] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 129.326978] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 129.334109] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.341249] ---[ end trace c551e8028fbaf59d ]--- [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.360445] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.824428] net eth0: Unexpected TXQ (0) queue failure: -12 Fixes: 2c53d0f6 ("vdpasim: vDPA device simulator") Signed-off-by:
-
Michael S. Tsirkin authored
This reverts commit 7ed9e3d9. The patch creates a DoS risk since it can result in a high order memory allocation. Fixes: 7ed9e3d9 ("vhost-vdpa: fix page pinning leakage in error path") Cc: stable@vger.kernel.org Signed-off-by:
-
Jing Xiangfeng authored
Fix to return the variable "err" from the error handling case instead of "ret". Fixes: 94abbccd ("vdpa/mlx5: Add shared memory registration code") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Link: https://lore.kernel.org/r/20201026070637.164321-1-jingxiangfeng@huawei.comSigned-off-by:
Eli Cohen <elic@nvidia.com> Cc: stable@vger.kernel.org Acked-by:
-
Dan Carpenter authored
The copy_to/from_user() functions return the number of bytes which we weren't able to copy but the ioctl should return -EFAULT if they fail. Fixes: a127c5bb ("vhost-vdpa: fix backend feature ioctls") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023120853.GI282278@mwandaSigned-off-by:
-
- 23 Oct, 2020 3 commits
-
-
Jason Wang authored
This implements a sample get_iova_range() for the simulator which advertise [0, ULLONG_MAX] as the valid range. Signed-off-by:
-
Jason Wang authored
This patch introduces a new ioctl for vhost-vdpa device that can report the iova range by the device. For device that implements get_iova_range() method, we fetch it from the vDPA device. If device doesn't implement get_iova_range() but depends on platform IOMMU, we will query via DOMAIN_ATTR_GEOMETRY, otherwise [0, ULLONG_MAX] is assumed. For safety, this patch also rules out the map request which is not in the valid range. Signed-off-by:
-
Jason Wang authored
This patch introduce a config op to get valid iova range from the vDPA device. Signed-off-by:
-
- 21 Oct, 2020 13 commits
-
-
David Hildenbrand authored
Let's add the status/info page, which is still under construction, however, already contains valuable documentation/information. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617104756.6312-1-david@redhat.comSigned-off-by:
-
Zhu Lingshan authored
This commit removed unnecessary spin_locks in vhost_vring_call and related operations. Because we manipulate irq offloading contents in vhost_vdpa ioctl code path which is already protected by dev mutex and vq mutex. Signed-off-by:
-
Stefano Garzarella authored
If riov and wiov are both defined and they point to different objects, only riov is initialized. If the wiov is not initialized by the caller, the function fails returning -EINVAL and printing "Readable desc 0x... after writable" error message. This issue happens when descriptors have both readable and writable buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable buffer and status as last byte of writable buffer) and we call __vringh_iov() to get both type of buffers in two different iovecs. Let's replace the 'else if' clause with 'if' to initialize both riov and wiov if they are not NULL. As checkpatch pointed out, we also avoid crashing the kernel when riov and wiov are both NULL, replacing BUG() with WARN_ON() and returning -EINVAL. Fixes: f87d0fbb ("vringh: host-side implementation of virtio rings.") Cc: stable@vger.kernel.org Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.comSigned-off-by:
-
Eli Cohen authored
set_map() is used by mlx5 vdpa to create a memory region based on the address map passed by the iotlb argument. If we get successive calls, we will destroy the current memory region and build another one based on the new address mapping. We also need to setup the hardware resources since they depend on the memory region. If these calls happen before DRIVER_OK, It means that driver VQs may also not been setup and we may not create them yet. In this case we want to avoid setting up the other resources and defer this till we get DRIVER OK. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:
-
Pierre Morel authored
If protected virtualization is active on s390, VIRTIO has only retricted access to the guest memory. Define CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS and export arch_has_restricted_virtio_memory_access to advertize VIRTIO if that's the case. Signed-off-by:
Pierre Morel <pmorel@linux.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/1599728030-17085-3-git-send-email-pmorel@linux.ibm.comSigned-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Pierre Morel authored
An architecture may restrict host access to guest memory, e.g. IBM s390 Secure Execution or AMD SEV. Provide a new Kconfig entry the architecture can select, CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, when it provides the arch_has_restricted_virtio_memory_access callback to advertise to VIRTIO common code when the architecture restricts memory access from the host. The common code can then fail the probe for any device where VIRTIO_F_ACCESS_PLATFORM is required, but not set. Signed-off-by:
-
Tian Tao authored
linux/kernel.h is included more than once, Remove the one that isn't necessary. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1600131102-24672-1-git-send-email-tiantao6@hisilicon.comSigned-off-by:
-
Li Wang authored
Fix the warning: [-Werror=-Wframe-larger-than=] drivers/vhost/vhost.c: In function log_used: drivers/vhost/vhost.c:1906:1: warning: the frame size of 1040 bytes is larger than 1024 bytes Signed-off-by:
Li Wang <li.wang@windriver.com> Link: https://lore.kernel.org/r/1600106889-25013-1-git-send-email-li.wang@windriver.comSigned-off-by:
-
Rikard Falkeborn authored
mem_id_table is not modified, so make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200911203509.26505-4-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
id_table is not modified, so make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Rikard Falkeborn authored
id_table is not modified, so make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Eli Cohen authored
Set VIRTIO_NET_S_LINK_UP in config status to allow the get the bring the net device's link up. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:
-
Eli Cohen authored
Introduce a dedicated function to be used for setting 16 bit fields per virio endianness requirements and use it to set the mtu field. Signed-off-by:
-
- 11 Oct, 2020 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "Five fixes. Subsystems affected by this patch series: MAINTAINERS, mm/pagemap, mm/swap, and mm/hugetlb" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected by khugepaged mm: validate inode in mapping_set_error() mm: mmap: Fix general protection fault in unlink_file_vma() MAINTAINERS: Antoine Tenart's email address MAINTAINERS: change hardening mailing list
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "Fixes an obvious bug (memory leak introduced in 5.8)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: pipe: Fix memory leaks in create_pipe_files()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two fixes: - Fix a (hopefully final) IRQ state tracking bug vs MCE handling - Fix a documentation link" * tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Fix incorrect references to zero-page.txt x86/mce: Use idtentry_nmi_enter/exit()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Ingo Molnar: "Fix an error handling bug that can cause a lockup if a CPU is offline (doh ...)" * tag 'perf-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix task_function_call() error handling
-
Vijay Balakrishna authored
When memory is hotplug added or removed the min_free_kbytes should be recalculated based on what is expected by khugepaged. Currently after hotplug, min_free_kbytes will be set to a lower default and higher default set when THP enabled is lost. This change restores min_free_kbytes as expected for THP consumers. [vijayb@linux.microsoft.com: v5] Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com Fixes: f000565a ("thp: set recommended min free kbytes") Signed-off-by:
Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Allen Pais <apais@microsoft.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
The swap address_space doesn't have host. Thus, it makes kernel crash once swap write meets error. Fix it. Fixes: 735e4ae5 ("vfs: track per-sb writeback errors and report them to syncfs") Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Andres Freund <andres@anarazel.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201010000650.750063-1-minchan@kernel.orgSigned-off-by:
-
Miaohe Lin authored
The syzbot reported the below general protection fault: general protection fault, probably for non-canonical address 0xe00eeaee0000003b: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x00777770000001d8-0x00777770000001df] CPU: 1 PID: 10488 Comm: syz-executor721 Not tainted 5.9.0-rc3-syzkaller #0 RIP: 0010:unlink_file_vma+0x57/0xb0 mm/mmap.c:164 Call Trace: free_pgtables+0x1b3/0x2f0 mm/memory.c:415 exit_mmap+0x2c0/0x530 mm/mmap.c:3184 __mmput+0x122/0x470 kernel/fork.c:1076 mmput+0x53/0x60 kernel/fork.c:1097 exit_mm kernel/exit.c:483 [inline] do_exit+0xa8b/0x29f0 kernel/exit.c:793 do_group_exit+0x125/0x310 kernel/exit.c:903 get_signal+0x428/0x1f00 kernel/signal.c:2757 arch_do_signal+0x82/0x2520 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:136 [inline] exit_to_user_mode_prepare+0x1ae/0x200 kernel/entry/common.c:167 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:242 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It's because the ->mmap() callback can change vma->vm_file and fput the original file. But the commit d70cec89 ("mm: mmap: merge vma after call_mmap() if possible") failed to catch this case and always fput() the original file, hence add an extra fput(). [ Thanks Hillf for pointing this extra fput() out. ] Fixes: d70cec89 ("mm: mmap: merge vma after call_mmap() if possible") Reported-by: syzbot+c5d5a51dcbb558ca0cb5@syzkaller.appspotmail.com Signed-off-by:Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Antoine Tenart authored
Use my kernel.org address instead of my bootlin.com one. Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Kees Cook authored
As more email from git history gets aimed at the OpenWall kernel-hardening@ list, there has been a desire to separate "new topics" from "on-going" work. To handle this, the superset of hardening email topics are now to be directed to linux-hardening@vger.kernel.org. Update the MAINTAINERS file and the .mailmap to accomplish this, so that linux-hardening@ can be treated like any other regular upstream kernel development list. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
