- 16 Dec, 2011 2 commits
-
-
Benjamin Herrenschmidt authored
-
Benjamin Herrenschmidt authored
-
- 08 Dec, 2011 21 commits
-
-
Anton Blanchard authored
Most distros use it so we may as well enable it and get regular compile testing. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
When issuing a system reset we almost always oops in the oops_to_nvram code because multiple CPUs are using the deflate work area. Add a spinlock to protect it. To play it safe I'm using trylock to avoid locking up if the NVRAM code oopses. This means we might miss multiple CPUs oopsing at exactly the same time but I think it's best to play it safe for now. Once we are happy with the reliability we can change it to a full spinlock. Signed-off-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
Finn Thain authored
On most 68k Macs the SCC IRQ is an autovector interrupt and cannot be masked. This can be a problem when pmac_zilog starts up. For example, the serial debugging code in arch/m68k/kernel/head.S may be used beforehand. It disables the SCC interrupts at the chip but doesn't ack them. Then when a pmac_zilog port is used, the machine locks up with "unexpected interrupt". This can happen in pmz_shutdown() since the irq is freed before the channel interrupts are disabled. Fix this by clearing interrupt enable bits before the handler is uninstalled. Also move the interrupt control bit flipping into a separate pmz_interrupt_control() routine. Replace all instances of these operations with calls to this routine. Omit the zssync() calls that seem to serve no purpose. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Paul Mackerras authored
This fixes a problem where a CPU thread coming out of nap mode can think it has valid values in the nonvolatile GPRs (r14 - r31) as saved away in power7_idle, but in fact the values have been trashed because the thread was used for KVM in the mean time. The result is that the thread crashes because code that called power7_idle (e.g., pnv_smp_cpu_kill_self()) goes to use values in registers that have been trashed. The bit field in SRR1 that tells whether state was lost only reflects the most recent nap, which may not have been the nap instruction in power7_idle. So we need an extra PACA field to indicate that state has been lost even if SRR1 indicates that the most recent nap didn't lose state. We clear this field when saving the state in power7_idle, we set it to a non-zero value when we use the thread for KVM, and we test it in power7_wakeup_noloss. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
At present, on the powernv platform, if you off-line a CPU that was online, and then try to on-line it again, the kernel generates a warning message "OPAL Error -1 starting CPU n". Furthermore, if the CPU is a secondary thread that was used by KVM while it was off-line, the CPU fails to come online. The first problem is fixed by only calling OPAL to start the CPU the first time it is on-lined, as indicated by the cpu_start field of its PACA being zero. The second problem is fixed by restoring the cpu_start field to 1 instead of 0 when using the CPU within KVM. Signed-off-by:
-
Anton Blanchard authored
The minimum RMO size field in ibm,client-architecture is currently ignored, but a future firmware version will rectify that. Since we always get at least 128MB of RMO right now, asking for 64MB is likely to result in boot failures. We should bump it to at least 128MB, but considering all the boot issues we have on 128MB RMO boxes and all new machines have virtual RMO, we may as well set our minimum to 256MB. Signed-off-by:
-
sukadev@linux.vnet.ibm.com authored
With CONFIG_STRICT_DEVMEM=y, user space cannot read any part of /dev/mem. Since this breaks librtas, punch a hole in /dev/mem to allow access to the rmo_buffer that librtas needs. Anton Blanchard reported the problem and helped with the fix. A quick test for this patch: # cat /proc/rtas/rmo_buffer 000000000f190000 10000 # python -c "print 0x000000000f190000 / 0x10000" 3865 # dd if=/dev/mem of=/tmp/foo count=1 bs=64k skip=3865 1+0 records in 1+0 records out 65536 bytes (66 kB) copied, 0.000205235 s, 319 MB/s # dd if=/dev/mem of=/tmp/foo dd: reading `/dev/mem': Operation not permitted 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.00022519 s, 0.0 kB/s Signed-off-by:Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
So I've had one of these for a while and it looks like the vendor never bothered submitting the support upstream. This adds it using ppc40x_simple and provides a device-tree. There are some changes to the boot wrapper because the way u-boot works on this thing, it seems to expect a multipart image with the kernel, initrd and dtb in it. The USB support is missing as it needs the yet unmerged driver for the DWC OTG part and the GPIOs may need further definition in the dts. Signed-off-by: -
Geoff Levand authored
Refresh ps3_defconfig to latest kernel sources and change the options: CONFIG_PPP=m to CONFIG_PPP=n. CONFIG_NAMESPACES=y to CONFIG_NAMESPACES=n CONFIG_NUMA=y to CONFIG_NUMA=n Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Geoff Levand authored
Add an __init annotation to the ps3_smp_probe() routine. Fixes build warnings like these when CONFIG_DEBUG_SECTION_MISMATCH=y: WARNING: Section mismatch in reference from the function .ps3_smp_probe() Signed-off-by:
-
Geoff Levand authored
Fix some PS3 repository.c build warnings when DEBUG is defined. Also change most pr_debug calls to pr_devel calls. Fixes warnings like these: format '%lx' expects type 'long unsigned int', but argument 7 has type 'u64' Signed-off-by:
-
Geoff Levand authored
The lv1 hcall #91 should be named lv1_read_repository_node, and not lv1_get_repository_node_value. Adjust the lv1 hcall table and all calls. Signed-off-by:
-
Geoff Levand authored
The lv1_get_version_info hcall takes 2, not 1 output arguments. Adjust the lv1 hcall table and all calls. Usage: int lv1_get_version_info(u64 *version_number, u64 *vendor_id) Signed-off-by:
-
Geoff Levand authored
The lv1_get_virtual_address_space_id_of_ppe hcall takes 0, not 1 input arguments. Adjust the lv1 hcall table and all calls. Signed-off-by:
-
Geoff Levand authored
The lv1_net_stop_tx_dma and net_stop_rx_dma hcalls take 2, not 3 input arguments. Adjust the lv1 hcall table and all calls. Signed-off-by:
-
Geoff Levand authored
General code cleanup for PS3 interrupt.c: o Fill out comments for structure members. o Move variables ipi_debug_brk_mask and lock from struct ps3_bmp to struct ps3_private. o Fix pr_debug build errors when DEBUG is defined. o Convert bit operation to set_bit(). o Convert DBG macro from pr_debug to pr_devel o Add new macro FAIL to replace pr_debug calls Signed-off-by:
-
Deepthi Dharwar authored
This patch makes pseries_idle_driver not to be registered when power_save=off kernel boot option is specified. The cpuidle_disable variable used here is similar to its usage on x86. If cpuidle_disable is set then sysfs entries for cpuidle framework are not created and the required drivers are not loaded. Signed-off-by:
Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by:
Trinabh Gupta <g.trinabh@gmail.com> Signed-off-by:
Arun R Bharadwaj <arun.r.bharadwaj@gmail.com> Signed-off-by:
-
Deepthi Dharwar authored
This patch enables cpuidle for pSeries and pSeries_idle is directly called from the idle loop. As a result of pSeries_idle, cpuidle driver registered with cpuidle subsystem comes into action. On failure of loading of the driver or cpuidle framework default idle is executed as part of the function. This patch also removes the routines pseries_shared_idle_sleep and pseries_dedicated_idle_sleep as they are now implemented as part of pseries_idle cpuidle driver. Signed-off-by:
-
Deepthi Dharwar authored
This patch implements a back-end cpuidle driver for pSeries based on pseries_dedicated_idle_loop and pseries_shared_idle_loop routines. The driver is built only if CONFIG_CPU_IDLE is set. This cpuidle driver uses global registration of idle states and not per-cpu. Signed-off-by:
-
Deepthi Dharwar authored
This patch provides cpu_idle_wait() routine for the powerpc platform which is required by the cpuidle subsystem. This routine is required to change the idle handler on SMP systems. The equivalent routine for x86 is in arch/x86/kernel/process.c but the powerpc implementation is different. cpuidle_disable variable is to enable/disable cpuidle framework if power_save option is set during the boot time. Signed-off-by:
-
Benjamin Herrenschmidt authored
-
- 07 Dec, 2011 17 commits
-
-
Benjamin Herrenschmidt authored
-
Benjamin Herrenschmidt authored
It's only used inside the same file where it's defined. There's also no point exporting it anymore. Signed-off-by: -
Benjamin Herrenschmidt authored
Open Firmware on OPAL machines seems to have issues if we close stdin and/or we try to print things after calling "quiesce" so we avoid doing both. Signed-off-by: -
Benjamin Herrenschmidt authored
Signed-off-by: -
Benjamin Herrenschmidt authored
This adds some more interfaces for OPAL v2 Signed-off-by: -
Becky Bruce authored
Define HUGETLB_NEED_PRELOAD in mmu-book3e.h for CONFIG_PPC64 instead of having a much more complicated #if block. This is easier to read and maintain. Signed-off-by:
Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by:
-
Becky Bruce authored
This avoids an extra find_vma() and is less error-prone. Signed-off-by:
-
Becky Bruce authored
Signed-off-by:
-
Becky Bruce authored
Signed-off-by:
-
Becky Bruce authored
Allow hugetlb to be enabled on 64b FSL_BOOK3E. No platforms enable it by default yet. Signed-off-by:
-
Becky Bruce authored
For 64-bit FSL_BOOKE implementations, gigantic pages need to be reserved at boot time by the memblock code based on the command line. This adds the call that handles the reservation, and fixes some code comments. It also removes the previous pr_err when reserve_hugetlb_gpages is called on a system without hugetlb enabled - the way the code is structured, the call is unconditional and the resulting error message spurious and confusing. Signed-off-by:
-
Becky Bruce authored
Before hugetlb, at each level of the table, we test for !0 to determine if we have a valid table entry. With hugetlb, this compare becomes: < 0 is a normal entry 0 is an invalid entry > 0 is huge This works because the hugepage code pulls the top bit off the entry (which for non-huge entries always has the top bit set) as an indicator that we have a hugepage. Signed-off-by: -
Becky Bruce authored
I happened to comment this code while I was digging through it; we might as well commit that. I also made some whitespace changes - the existing code had a lot of unnecessary newlines that I found annoying when I was working on my tiny laptop. No functional changes. Signed-off-by:
-
Becky Bruce authored
The original 32-bit hugetlb implementation used PPC64 vs PPC32 to determine which code path to take. However, the final hugetlb implementation for 64-bit FSL ended up shared with the FSL 32-bit code so the actual check needs to be FSL_BOOK3E vs everything else. This patch changes the include protections to reflect this. There are also a couple of related comment fixes. Signed-off-by:
-
Becky Bruce authored
This updates the hugetlb page table code to handle 64-bit FSL_BOOKE. The previous 32-bit work counted on the inner levels of the page table collapsing. Signed-off-by:
-
Becky Bruce authored
This patch does 2 things: It corrects the code that determines the size to write into MAS1 for the PPC_MM_SLICES case (this originally came from David Gibson and I had incorrectly altered it), and it changes the methodolody used to calculate the size for !PPC_MM_SLICES to work for 64-bit as well as 32-bit. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Becky Bruce authored
There was an unconditional return of "1" in the original code from David Gibson, and I dropped it because it wasn't needed for FSL BOOKE 32-bit. However, not all systems (including 64-bit FSL BOOKE) do loading of the hpte from the fault handler asm and depend on this function returning 1, which causes a call to update_mmu_cache() that writes an entry into the tlb. Signed-off-by:
-
